-Index: linux-2.6.24/drivers/serial/amba-pl010.c
-===================================================================
---- linux-2.6.24.orig/drivers/serial/amba-pl010.c
-+++ linux-2.6.24/drivers/serial/amba-pl010.c
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
@@ -52,11 +52,10 @@
#include <asm/io.h>
#define AMBA_ISR_PASS_LIMIT 256
-@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
+@@ -82,9 +81,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
-+ cr = readl(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
cr &= ~UART010_CR_TIE;
- writel(cr, uap->port.membase + UART010_CR);
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
}
-@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
+
+ static void pl010_start_tx(struct uart_port *port)
+@@ -92,9 +91,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
-+ cr = readl(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
cr |= UART010_CR_TIE;
- writel(cr, uap->port.membase + UART010_CR);
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
}
-@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
+
+ static void pl010_stop_rx(struct uart_port *port)
+@@ -102,9 +101,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
-+ cr = readl(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
- writel(cr, uap->port.membase + UART010_CR);
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
}
-@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
+
+ static void pl010_enable_ms(struct uart_port *port)
+@@ -112,9 +111,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
-+ cr = readl(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
cr |= UART010_CR_MSIE;
- writel(cr, uap->port.membase + UART010_CR);
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
}
-@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
+
+ static void pl010_rx_chars(struct uart_amba_port *uap)
+@@ -122,9 +121,9 @@
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
- status = readb(uap->port.membase + UART01x_FR);
-+ status = readl(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
while (UART_RX_DATA(status) && max_count--) {
- ch = readb(uap->port.membase + UART01x_DR);
-+ ch = readl(uap->port.membase + UART01x_DR);
++ ch = __raw_readl(uap->port.membase + UART01x_DR);
flag = TTY_NORMAL;
uap->port.icount.rx++;
-@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
+@@ -133,9 +132,9 @@
* Note that the error handling code is
* out of the main execution path
*/
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
++ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
if (unlikely(rsr & UART01x_RSR_ANY)) {
- writel(0, uap->port.membase + UART01x_ECR);
+- writel(0, uap->port.membase + UART01x_ECR);
++ __raw_writel(0, uap->port.membase + UART01x_ECR);
-@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
+ if (rsr & UART01x_RSR_BE) {
+ rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+@@ -165,7 +164,7 @@
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
- status = readb(uap->port.membase + UART01x_FR);
-+ status = readl(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
-@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
+@@ -178,7 +177,7 @@
+ int count;
+
+ if (uap->port.x_char) {
+- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
++ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
+ uap->port.icount.tx++;
+ uap->port.x_char = 0;
+ return;
+@@ -190,7 +189,7 @@
+
+ count = uap->port.fifosize >> 1;
+ do {
+- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
++ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uap->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+@@ -208,9 +207,9 @@
+ {
+ unsigned int status, delta;
- writel(0, uap->port.membase + UART010_ICR);
+- writel(0, uap->port.membase + UART010_ICR);
++ __raw_writel(0, uap->port.membase + UART010_ICR);
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
-@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -238,7 +237,7 @@
spin_lock(&uap->port.lock);
- status = readb(uap->port.membase + UART010_IIR);
-+ status = readl(uap->port.membase + UART010_IIR);
++ status = __raw_readl(uap->port.membase + UART010_IIR);
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -251,7 +250,7 @@
if (pass_counter-- == 0)
break;
- status = readb(uap->port.membase + UART010_IIR);
-+ status = readl(uap->port.membase + UART010_IIR);
++ status = __raw_readl(uap->port.membase + UART010_IIR);
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
-@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -265,7 +264,7 @@
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int status = readb(uap->port.membase + UART01x_FR);
-+ unsigned int status = readl(uap->port.membase + UART01x_FR);
++ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
-@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
+@@ -275,7 +274,7 @@
unsigned int result = 0;
unsigned int status;
- status = readb(uap->port.membase + UART01x_FR);
-+ status = readl(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
-@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
+@@ -301,12 +300,12 @@
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readb(uap->port.membase + UART010_LCRH);
-+ lcr_h = readl(uap->port.membase + UART010_LCRH);
++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
-@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
+ lcr_h &= ~UART01x_LCRH_BRK;
+- writel(lcr_h, uap->port.membase + UART010_LCRH);
++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+
+@@ -334,12 +333,12 @@
/*
* initialise the old status of the modem signals
*/
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
/*
* Finally, enable interrupts
-@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
- writel(0, uap->port.membase + UART010_CR);
+ */
+- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
++ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
+ uap->port.membase + UART010_CR);
+
+ return 0;
+@@ -362,10 +361,10 @@
+ /*
+ * disable all interrupts, disable the port
+ */
+- writel(0, uap->port.membase + UART010_CR);
++ __raw_writel(0, uap->port.membase + UART010_CR);
/* disable break condition and fifos */
- writel(readb(uap->port.membase + UART010_LCRH) &
-+ writel(readl(uap->port.membase + UART010_LCRH) &
++ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
-@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
+@@ -387,7 +386,7 @@
/*
* Ask the core to calculate the divisor for us.
*/
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
-@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
+@@ -450,25 +449,25 @@
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
++ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
-@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
+
+- writel(0, uap->port.membase + UART010_CR);
++ __raw_writel(0, uap->port.membase + UART010_CR);
+
+ /* Set baud rate */
+ quot -= 1;
+- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
+- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
++ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
++ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
+
+ /*
+ * ----------v----------v----------v----------v-----
+ * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+ * ----------^----------^----------^----------^-----
+ */
+- writel(lcr_h, uap->port.membase + UART010_LCRH);
+- writel(old_cr, uap->port.membase + UART010_CR);
++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
++ __raw_writel(old_cr, uap->port.membase + UART010_CR);
+
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+@@ -540,7 +539,7 @@
.verify_port = pl010_verify_port,
};
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
+@@ -550,10 +549,10 @@
unsigned int status;
do {
- status = readb(uap->port.membase + UART01x_FR);
-+ status = readl(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
barrier();
} while (!UART_TX_READY(status));
- writel(ch, uap->port.membase + UART01x_DR);
-@@ -567,7 +566,7 @@ pl010_console_write(struct console *co,
+- writel(ch, uap->port.membase + UART01x_DR);
++ __raw_writel(ch, uap->port.membase + UART01x_DR);
+ }
+
+ static void
+@@ -567,8 +566,8 @@
/*
* First save the CR then disable the interrupts
*/
- old_cr = readb(uap->port.membase + UART010_CR);
-+ old_cr = readl(uap->port.membase + UART010_CR);
- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
+- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
++ old_cr = __raw_readl(uap->port.membase + UART010_CR);
++ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -577,7 +576,7 @@ pl010_console_write(struct console *co,
+
+@@ -577,10 +576,10 @@
* and restore the TCR
*/
do {
- status = readb(uap->port.membase + UART01x_FR);
-+ status = readl(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
barrier();
} while (status & UART01x_FR_BUSY);
- writel(old_cr, uap->port.membase + UART010_CR);
-@@ -589,9 +588,9 @@ static void __init
+- writel(old_cr, uap->port.membase + UART010_CR);
++ __raw_writel(old_cr, uap->port.membase + UART010_CR);
+
+ clk_disable(uap->clk);
+ }
+@@ -589,9 +588,9 @@
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
++ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, quot;
- lcr_h = readb(uap->port.membase + UART010_LCRH);
-+ lcr_h = readl(uap->port.membase + UART010_LCRH);
++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
+@@ -606,8 +605,8 @@
else
*bits = 8;
- quot = readb(uap->port.membase + UART010_LCRL) |
- readb(uap->port.membase + UART010_LCRM) << 8;
-+ quot = readl(uap->port.membase + UART010_LCRL) |
-+ readl(uap->port.membase + UART010_LCRM) << 8;
++ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
++ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
-@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
+@@ -625,7 +624,7 @@
* if so, search for the first available port that does have
* console support.
*/
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
-@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
+@@ -643,7 +642,7 @@
static struct uart_driver amba_reg;
static struct console amba_console = {
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
-@@ -659,11 +658,11 @@ static struct console amba_console = {
+@@ -659,11 +658,11 @@
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
.cons = AMBA_CONSOLE,
};
-Index: linux-2.6.24/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.24.orig/drivers/serial/Kconfig
-+++ linux-2.6.24/drivers/serial/Kconfig
-@@ -303,10 +303,25 @@ config SERIAL_AMBA_PL010
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -287,10 +287,25 @@
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
projects / openwrt.git / blobdiff