ar71xx: do not reset the hardware on transmit timeout - this would mess up the up...

[openwrt.git] / target / linux / at91 / image / Config.in

diff --git a/target/linux/at91/image/Config.in b/target/linux/at91/image/Config.in
index b5a06f6..917398f 100644 (file)
--- a/target/linux/at91/image/Config.in
+++ b/target/linux/at91/image/Config.in
@@ -1,25 +1,23 @@
 config AT91_DFBOOT
        bool "Build dataflashboot loader"
        depends TARGET_at91
-       default y
+       default n
 
 config AT91_UBOOT
        bool "Build U-Boot bootloader"
        depends TARGET_at91
-       default y
+       default n
 
 config UBOOT_TARGET
        string "U-Boot target board"
-       depends TARGET_at91
        depends AT91_UBOOT
-       default "vlink"
+       default "netusg20"
        help
          For all supported boards there are ready-to-use default
                configurations available; just type "<board_name>".
 
 config UBOOT_IPADDR
        string "IP Address for U-Boot"
-       depends TARGET_at91
        depends AT91_UBOOT
        default "192.168.0.178"
        help
@@ -27,9 +25,13 @@ config UBOOT_IPADDR
 
 config UBOOT_SERVERIP
        string "IP Address of TFTP server"
-       depends TARGET_at91
        depends AT91_UBOOT
        default "192.168.0.232"
        help
          IP address of TFTP server for U-Boot
 
+config FLEXIBITY_ROOT
+       bool "Build Flexibity RootFS (with embedded kernel)"
+       depends TARGET_at91_flexibity
+       default n
+