ar71xx: remove the built-in MTD map of the Zcomax devices
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-dir-825-b1.c
index ab973eb..1b4b490 100644 (file)
@@ -11,8 +11,6 @@
  */
 
 #include <linux/platform_device.h>
  */
 
 #include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/rtl8366.h>
 
 #include <linux/delay.h>
 #include <linux/rtl8366.h>
 
 #define DIR825B1_MAC_LOCATION_0                        0x1f66ffa0
 #define DIR825B1_MAC_LOCATION_1                        0x1f66ffb4
 
 #define DIR825B1_MAC_LOCATION_0                        0x1f66ffa0
 #define DIR825B1_MAC_LOCATION_1                        0x1f66ffb4
 
-static struct mtd_partition dir825b1_partitions[] = {
-       {
-               .name           = "uboot",
-               .offset         = 0,
-               .size           = 0x040000,
-               .mask_flags     = MTD_WRITEABLE,
-       }, {
-               .name           = "config",
-               .offset         = 0x040000,
-               .size           = 0x010000,
-               .mask_flags     = MTD_WRITEABLE,
-       }, {
-               .name           = "firmware",
-               .offset         = 0x050000,
-               .size           = 0x610000,
-       }, {
-               .name           = "caldata",
-               .offset         = 0x660000,
-               .size           = 0x010000,
-               .mask_flags     = MTD_WRITEABLE,
-       }, {
-               .name           = "unknown",
-               .offset         = 0x670000,
-               .size           = 0x190000,
-               .mask_flags     = MTD_WRITEABLE,
-       }
-};
-
-static struct flash_platform_data dir825b1_flash_data = {
-       .parts          = dir825b1_partitions,
-       .nr_parts       = ARRAY_SIZE(dir825b1_partitions),
-};
-
 static struct gpio_led dir825b1_leds_gpio[] __initdata = {
        {
                .name           = "d-link:blue:usb",
 static struct gpio_led dir825b1_leds_gpio[] __initdata = {
        {
                .name           = "d-link:blue:usb",
@@ -184,7 +149,7 @@ static void __init dir825b1_setup(void)
        ath79_register_eth(0);
        ath79_register_eth(1);
 
        ath79_register_eth(0);
        ath79_register_eth(1);
 
-       ath79_register_m25p80(&dir825b1_flash_data);
+       ath79_register_m25p80(NULL);
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
                                 dir825b1_leds_gpio);
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
                                 dir825b1_leds_gpio);
This page took 0.02424 seconds and 4 git commands to generate.