#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
OTHER_MENU:=Other modules
$(eval $(call KernelPackage,crc-itu-t))
+define KernelPackage/crc-ccitt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC-CCITT support
+ KCONFIG:=CONFIG_CRC_CCITT
+ FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+endef
+
+define KernelPackage/crc-ccitt/description
+ Kernel module for CRC-CCITT support
+endef
-define KernelPackage/crypto
+$(eval $(call KernelPackage,crc-ccitt))
+
+
+define KernelPackage/crc7
SUBMENU:=$(OTHER_MENU)
- TITLE:=CryptoAPI modules
- KCONFIG:= \
- CONFIG_CRYPTO_HMAC=m \
- CONFIG_CRYPTO_NULL=m \
- CONFIG_CRYPTO_MD4=m \
- CONFIG_CRYPTO_MD5=m \
- CONFIG_CRYPTO_SHA1=m \
- CONFIG_CRYPTO_SHA256=m \
- CONFIG_CRYPTO_SHA512=m \
- CONFIG_CRYPTO_WP512=m \
- CONFIG_CRYPTO_TGR192=m \
- CONFIG_CRYPTO_DES=m \
- CONFIG_CRYPTO_BLOWFISH=m \
- CONFIG_CRYPTO_TWOFISH=m \
- CONFIG_CRYPTO_SERPENT=m \
- CONFIG_CRYPTO_AES=m \
- CONFIG_CRYPTO_CAST5=m \
- CONFIG_CRYPTO_CAST6=m \
- CONFIG_CRYPTO_TEA=m \
- CONFIG_CRYPTO_ARC4=m \
- CONFIG_CRYPTO_KHAZAD=m \
- CONFIG_CRYPTO_ANUBIS=m \
- CONFIG_CRYPTO_DEFLATE=m \
- CONFIG_CRYPTO_MICHAEL_MIC=m \
- CONFIG_CRYPTO_CRC32C=m \
- CONFIG_CRYPTO_ECB=m \
- CONFIG_CRYPTO_BLKCIPHER=m
- FILES:=$(LINUX_DIR)/crypto/*.$(LINUX_KMOD_SUFFIX)
-endef
-
-$(eval $(call KernelPackage,crypto))
+ TITLE:=CRC7 support
+ KCONFIG:=CONFIG_CRC7
+ FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc7)
+endef
+
+define KernelPackage/crc7/description
+ Kernel module for CRC7 support
+endef
+
+$(eval $(call KernelPackage,crc7))
+
+
+define KernelPackage/crc16
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC16 support
+ KCONFIG:=CONFIG_CRC16
+ FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc16)
+endef
+
+define KernelPackage/crc16/description
+ Kernel module for CRC16 support
+endef
+
+$(eval $(call KernelPackage,crc16))
define KernelPackage/eeprom-93cx6
TITLE:=EEPROM 93CX6 support
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_EEPROM_93CX6
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.29)),1)
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+else
FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+endif
AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
$(eval $(call KernelPackage,lp))
-
-define KernelPackage/soundcore
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Sound support
- KCONFIG:= \
- CONFIG_SOUND \
- CONFIG_SND \
- CONFIG_SND_HWDEP \
- CONFIG_SND_RAWMIDI \
- CONFIG_SND_TIMER \
- CONFIG_SND_PCM \
- CONFIG_HOSTAUDIO
-endef
-
-define KernelPackage/soundcore/2.4
- FILES:=$(LINUX_DIR)/drivers/sound/soundcore.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore)
-endef
-
-define KernelPackage/soundcore/2.6
-# KCONFIG+= \
-# CONFIG_SND \
-# CONFIG_SND_HWDEP \
-# CONFIG_SND_RAWMIDI \
-# CONFIG_SND_TIMER \
-# CONFIG_SND_PCM
- FILES:= \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-page-alloc.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-hwdep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-rawmidi.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-timer.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-pcm.$(LINUX_KMOD_SUFFIX) \
- $(if $(CONFIG_SND_MIXER_OSS),$(LINUX_DIR)/sound/core/oss/snd-mixer-oss.$(LINUX_KMOD_SUFFIX)) \
- $(if $(CONFIG_SND_PCM_OSS),$(LINUX_DIR)/sound/core/oss/snd-pcm-oss.$(LINUX_KMOD_SUFFIX))
- AUTOLOAD:=$(call AutoLoad,30, \
- soundcore \
- snd \
- snd-page-alloc \
- snd-hwdep \
- snd-rawmidi \
- snd-timer \
- snd-pcm \
- $(if $(CONFIG_SND_MIXER_OSS),snd-mixer-oss) \
- $(if $(CONFIG_SND_PCM_OSS),snd-pcm-oss) \
- )
-endef
-
-define KernelPackage/soundcore/uml-2.6
-# KCONFIG+= \
-# CONFIG_HOSTAUDIO
- FILES:= \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/arch/um/drivers/hostaudio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore hostaudio)
-endef
-
-define KernelPackage/soundcore/description
- Kernel modules for sound support
-endef
-
-$(eval $(call KernelPackage,soundcore))
-
-
-define KernelPackage/capi
+define KernelPackage/pcspkr
SUBMENU:=$(OTHER_MENU)
- TITLE:=CAPI Support
+ TITLE:=PC speaker support
DEPENDS:=@LINUX_2_6
- KCONFIG:= \
- CONFIG_ISDN \
- CONFIG_ISDN_CAPI \
- CONFIG_ISDN_CAPI_CAPI20
+ KCONFIG:=CONFIG_INPUT_PCSPKR
FILES:= \
- $(LINUX_DIR)/drivers/isdn/capi/kernelcapi.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/isdn/capi/capi.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,kernelcapi capi)
+ $(LINUX_DIR)/drivers/input/misc/pcspkr.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50, \
+ pcspkr \
+ )
endef
-define KernelPackage/capi/description
- Kernel module for basic CAPI support
+define KernelPackage/pcspkr/description
+ This enables sounds (tones) through the pc speaker
endef
-$(eval $(call KernelPackage,capi))
-
+$(eval $(call KernelPackage,pcspkr))
define KernelPackage/pcmcia-core
SUBMENU:=$(OTHER_MENU)
DEPENDS:=@PCMCIA_SUPPORT
KCONFIG:= \
CONFIG_PCMCIA \
- CONFIG_CARDBUS
+ CONFIG_CARDBUS \
CONFIG_PCCARD \
CONFIG_YENTA \
CONFIG_PCCARD_NONSTATIC \
# CONFIG_CARDBUS
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core yenta_socket ds)
+ $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,pcmcia_core ds)
endef
define KernelPackage/pcmcia-core/2.6
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic yenta_socket)
-endef
-
-define KernelPackage/pcmcia-core/au1000-2.6
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic au1x00_ss)
+ $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic)
endef
define KernelPackage/pcmcia-core/description
$(eval $(call KernelPackage,pcmcia-core))
+define KernelPackage/pcmcia-yenta
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=yenta socket driver
+ DEPENDS:=kmod-pcmcia-core
+ KCONFIG:=CONFIG_YENTA
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,yenta_socket)
+endef
+
+$(eval $(call KernelPackage,pcmcia-yenta))
+
+define KernelPackage/pcmcia-au1000
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RMI/AMD Au1000 PCMCIA support
+ DEPENDS:=kmod-pcmcia-core @TARGET_au1000
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,au1x00_ss)
+endef
+
+$(eval $(call KernelPackage,pcmcia-au1000))
+
+define KernelPackage/pcmcia-bcm63xx
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Broadcom BCM63xx PCMCIA support
+ DEPENDS:=kmod-pcmcia-core @TARGET_brcm63xx
+ KCONFIG:=CONFIG_PCMCIA_BCM63XX
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
+endef
+
+define KernelPackage/pcmcia-bcm63xx/description
+ Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
+endef
+
+$(eval $(call KernelPackage,pcmcia-bcm63xx))
+
define KernelPackage/pcmcia-serial
SUBMENU:=$(OTHER_MENU)
TITLE:=Serial devices support
DEPENDS:=kmod-pcmcia-core
KCONFIG:= \
CONFIG_PCMCIA_SERIAL_CS \
- CONFIG_SERIAL_8250_CS
+ CONFIG_SERIAL_8250_CS
AUTOLOAD:=$(call AutoLoad,45,serial_cs)
endef
$(eval $(call KernelPackage,pcmcia-serial))
+define KernelPackage/ssb
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Silicon Sonics Backplane glue code
+ DEPENDS:=@LINUX_2_6 @PCI_SUPPORT @!TARGET_brcm47xx||!TARGET_brcm63xx
+ KCONFIG:=\
+ CONFIG_SSB \
+ CONFIG_SSB_B43_PCI_BRIDGE=y \
+ CONFIG_SSB_DRIVER_MIPS=n \
+ CONFIG_SSB_DRIVER_PCICORE=y \
+ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_PCIHOST=y \
+ CONFIG_SSB_PCIHOST_POSSIBLE=y \
+ CONFIG_SSB_POSSIBLE=y \
+ CONFIG_SSB_SPROM=y \
+ CONFIG_SSB_SILENT=y
+ FILES:=$(LINUX_DIR)/drivers/ssb/ssb.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,29,ssb)
+endef
+
+define KernelPackage/ssb/description
+ Silicon Sonics Backplane glue code.
+endef
+
+$(eval $(call KernelPackage,ssb))
+
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-input-core
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BLUEZ_BNEP \
CONFIG_BLUEZ_HCIUART \
CONFIG_BLUEZ_HCIUSB \
+ CONFIG_BLUEZ_HIDP \
CONFIG_BT \
CONFIG_BT_L2CAP \
CONFIG_BT_SCO \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
+ CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIUSB \
- CONFIG_BT_HCIUART
+ CONFIG_BT_HCIUART \
+ CONFIG_BT_HIDP
endef
define KernelPackage/bluetooth/2.4
# CONFIG_BT_BNEP \
# CONFIG_BT_HCIUSB \
# CONFIG_BT_HCIUART
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.29)),1)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+else
+ FILES:= \
+ $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart hci_usb)
+endif
endef
define KernelPackage/bluetooth/description
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
- DEPENDS:=@TARGET_at91
+ DEPENDS:=@LINUX_2_6
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
- CONFIG_MMC_AT91
+ CONFIG_MMC_DEBUG=n \
+ CONFIG_MMC_UNSAFE_RESUME=n \
+ CONFIG_MMC_BLOCK_BOUNCE=y \
+ CONFIG_MMC_SDHCI=n \
+ CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
+ CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/mmc_block.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block at91_mci)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
endef
define KernelPackage/mmc/description
$(eval $(call KernelPackage,mmc))
+define KernelPackage/mmc-at91
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD Card Support on AT91
+ DEPENDS:=@TARGET_at91 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_AT91
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+endef
+
+define KernelPackage/mmc-at91/description
+ Kernel support for MMC/SD cards on the AT91 target
+endef
+
+$(eval $(call KernelPackage,mmc-at91))
+
+
+# XXX: added a workaround for watchdog path changes
+ifeq ($(KERNEL),2.4)
+ WATCHDOG_DIR=char
+endif
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
+ WATCHDOG_DIR=watchdog
+endif
+WATCHDOG_DIR?=char/watchdog
+
+define KernelPackage/atmel-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AT32AP700x watchdog
+ DEPENDS:=@TARGET_avr32
+ KCONFIG:=CONFIG_AT32AP700X_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+endef
+
+define KernelPackage/atmel-wdt/description
+ AT32AP700x watchdog
+endef
+
+$(eval $(call KernelPackage,atmel-wdt))
+
+
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
-define KernelPackage/softdog/2.4
- FILES:=$(LINUX_DIR)/drivers/char/softdog.o
+define KernelPackage/softdog/description
+ Software watchdog driver
endef
-define KernelPackage/softdog/2.6
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/softdog.ko
+$(eval $(call KernelPackage,softdog))
+
+
+define KernelPackage/leds-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO LED support
+ DEPENDS:= @GPIO_SUPPORT
+ KCONFIG:=CONFIG_LEDS_GPIO
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
endef
-define KernelPackage/softdog/description
- Software watchdog driver
+define KernelPackage/leds-gpio/description
+ Kernel module for LEDs on GPIO lines
endef
-$(eval $(call KernelPackage,softdog))
+$(eval $(call KernelPackage,leds-gpio))
+
+
+define KernelPackage/ledtrig-adm5120-switch
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED ADM5120 Switch Port Status Trigger
+ DEPENDS:=@TARGET_adm5120
+ KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
+endef
+
+define KernelPackage/ledtrig-adm5120-switch/description
+ Kernel module to allow LEDs to be controlled by the port states
+ of the ADM5120 built-in ethernet switch.
+endef
+
+$(eval $(call KernelPackage,ledtrig-adm5120-switch))
define KernelPackage/leds-net48xx
SUBMENU:=$(OTHER_MENU)
TITLE:=Soekris Net48xx LED support
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
KCONFIG:=CONFIG_LEDS_NET48XX
FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
define KernelPackage/leds-wrap
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=PCengines WRAP LED support
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
KCONFIG:=CONFIG_LEDS_WRAP
FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
$(eval $(call KernelPackage,leds-wrap))
+define KernelPackage/leds-alix
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines ALIX LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_ALIX
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-alix.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-alix)
+endef
+
+define KernelPackage/leds-alix/description
+ Kernel module for PCengines ALIX LEDs
+endef
+
+$(eval $(call KernelPackage,leds-alix))
+
+
+define KernelPackage/ledtrig-netdev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED NETDEV Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+endef
+
+define KernelPackage/ledtrig-netdev/description
+ Kernel module to drive LEDs based on network activity.
+endef
+
+$(eval $(call KernelPackage,ledtrig-netdev))
+
+
+define KernelPackage/ledtrig-morse
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED Morse Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+endef
+
+define KernelPackage/ledtrig-morse/description
+ Kernel module to show morse coded messages on LEDs.
+endef
+
+$(eval $(call KernelPackage,ledtrig-morse))
+
+
+define KernelPackage/gpio-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic GPIO char device support
+ DEPENDS:=@GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_DEVICE
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+endef
+
+define KernelPackage/gpio-dev/description
+ Kernel module to allows control of GPIO pins using a character device.
+endef
+
+$(eval $(call KernelPackage,gpio-dev))
+
+
define KernelPackage/nsc-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi GPIO support
define KernelPackage/scx200-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 GPIO support
- DEPENDS:=@TARGET_x86 kmod-nsc-gpio
+ DEPENDS:=@TARGET_x86 +kmod-nsc-gpio
KCONFIG:=CONFIG_SCx200_GPIO
FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 Watchdog support
DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SC1200_WDT
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_SCx200_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
$(eval $(call KernelPackage,scx200-wdt))
-define KernelPackage/hwmon
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Hardware monitoring support
- DEPENDS:=@LINUX_2_6
- KCONFIG:= \
- CONFIG_HWMON \
- CONFIG_HWMON_VID \
- CONFIG_HWMON_DEBUG_CHIP=n
- FILES:= \
- $(LINUX_DIR)/drivers/hwmon/hwmon.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/hwmon/hwmon-vid.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,hwmon hwmon-vid)
-endef
-
-define KernelPackage/hwmon/description
- Kernel modules for hardware monitoring
-endef
-
-$(eval $(call KernelPackage,hwmon))
-
-
-define KernelPackage/hwmon-pc87360
+define KernelPackage/sc520-wdt
SUBMENU:=$(OTHER_MENU)
- TITLE:=PC87360 monitoring support
- DEPENDS:=kmod-hwmon
- KCONFIG:=CONFIG_SENSORS_PC87360
- FILES:=$(LINUX_DIR)/drivers/hwmon/pc87360.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,pc87360)
+ TITLE:=Natsemi SC520 Watchdog support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SC520_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
endef
-define KernelPackage/hwmon-pc87360/description
- Kernel modules for PC87360 chips
+define KernelPackage/sc520-wdt/description
+ Kernel module for SC520 Watchdog
endef
-$(eval $(call KernelPackage,hwmon-pc87360))
+$(eval $(call KernelPackage,sc520-wdt))
define KernelPackage/input-core
define KernelPackage/input-evdev
SUBMENU:=$(OTHER_MENU)
- TITLE:=Input even device
+ TITLE:=Input event device
DEPENDS:=+kmod-input-core
KCONFIG:=CONFIG_INPUT_EVDEV
FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
endef
$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=HID Devices
+ DEPENDS:=+kmod-input-core +kmod-input-evdev
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
+define KernelPackage/input-polldev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled Input device support
+ DEPENDS:=+kmod-input-core @LINUX_2_6
+ KCONFIG:=CONFIG_INPUT_POLLDEV
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,input-polldev)
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/input-gpio-buttons
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO buttons input device
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
+ KCONFIG:= \
+ CONFIG_INPUT_GPIO_BUTTONS \
+ CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+endef
+
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-buttons))
+
+define KernelPackage/input-joydev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Joystick device support
+ DEPENDS:=+kmod-input-core
+ KCONFIG:=CONFIG_INPUT_JOYDEV
+ FILES:=$(LINUX_DIR)/drivers/input/joydev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,joydev)
+endef
+
+define KernelPackage/input-joydev/description
+ Kernel module for joystick support
+endef
+
+$(eval $(call KernelPackage,input-joydev))
+
+
+define KernelPackage/mmc-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD over SPI Support
+ DEPENDS:=@LINUX_2_6 +kmod-mmc +kmod-crc-itu-t +kmod-crc7
+ KCONFIG:=CONFIG_MMC_SPI \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/mmc_spi.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_spi)
+endef
+
+define KernelPackage/mmc-spi/description
+ Kernel support for MMC/SD over SPI
+endef
+
+$(eval $(call KernelPackage,mmc-spi))
+
+define KernelPackage/mmc-atmelmci
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Amtel MMC Support
+ DEPENDS:=@TARGET_avr32 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_ATMELMCI
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+endef
+
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for Atmel Multimedia Card Interface.
+endef
+
+$(eval $(call KernelPackage,mmc-atmelmci))
+
+define KernelPackage/spi-bitbang
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Serial Peripheral Interface bitbanging library
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_SPI_BITBANG \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_bitbang.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,91,spi_bitbang)
+endef
+
+define KernelPackage/spi-bitbang/description
+ This package contains the SPI bitbanging library
+endef
+
+$(eval $(call KernelPackage,spi-bitbang))
+
+define KernelPackage/spi-gpio-old
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Old GPIO based bitbanging SPI controller (DEPRECATED)
+ DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang
+ KCONFIG:=CONFIG_SPI_GPIO_OLD
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_gpio_old.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,92,spi_gpio_old)
+endef
+
+define KernelPackage/spi-gpio-old/description
+ This package contains the GPIO based bitbanging SPI controller driver
+endef
+
+$(eval $(call KernelPackage,spi-gpio-old))
+
+define KernelPackage/spi-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO-based bitbanging SPI Master
+ DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang
+ KCONFIG:=CONFIG_SPI_GPIO
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,92,spi_gpio)
+endef
+
+define KernelPackage/spi-gpio/description
+ This package contains the GPIO-based bitbanging SPI Master
+endef
+
+$(eval $(call KernelPackage,spi-gpio))
+
+define KernelPackage/spi-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=User mode SPI device driver
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_SPI_SPIDEV \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/spi/spidev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,91,spidev)
+endef
+
+define KernelPackage/spi-dev/description
+ This package contains the user mode SPI device driver
+endef
+
+$(eval $(call KernelPackage,spi-dev))
+
+define KernelPackage/bcm63xx-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Broadcom BCM63xx SPI driver
+ DEPENDS:=@TARGET_brcm63xx +kmod-spi-bitbang
+ KCONFIG:=CONFIG_SPI_BCM63XX
+ FILES:=$(LINUX_DIR)/drivers/spi/bcm63xx_spi.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,92,bcm63xx_spi)
+endef
+
+define KernelPackage/bcm63xx-spi/description
+ This package contains the Broadcom BCM63xx SPI Master driver
+endef
+
+$(eval $(call KernelPackage,bcm63xx-spi))
+
+define KernelPackage/cs5535-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AMD CS5535/CS5536 GPIO driver
+ DEPENDS:=@TARGET_x86||@TARGET_olpc
+ KCONFIG:=CONFIG_CS5535_GPIO
+ FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,cs5535_gpio)
+endef
+
+define KernelPackage/cs5535-gpio/description
+ This package contains the AMD CS5535/CS5536 GPIO driver
+endef
+
+$(eval $(call KernelPackage,cs5535-gpio))
+
+
+define KernelPackage/textsearch
+SUBMENU:=$(OTHER_MENU)
+ TITLE:=Textsearch support is selected if needed
+ DEPENDS:=@LINUX_2_6 @!LINUX_2_6_21
+ KCONFIG:= \
+ CONFIG_TEXTSEARCH=y \
+ CONFIG_TEXTSEARCH_KMP \
+ CONFIG_TEXTSEARCH_BM \
+ CONFIG_TEXTSEARCH_FSM
+ FILES:= \
+ $(LINUX_DIR)/lib/ts_kmp.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/lib/ts_bm.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/lib/ts_fsm.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
+endef
+
+$(eval $(call KernelPackage,textsearch))
+
+
+define KernelPackage/rfkill
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RF switch subsystem support
+ DEPENDS:=@LINUX_2_6 @!LINUX_2_6_21 @!TARGET_rb532 @!TARGET_avr32 @!TARGET_brcm47xx @!TARGET_s3c24xx @!TARGET_ifxmips @!TARGET_atheros @!TARGET_adm5120 @!TARGET_ar7 @!TARGET_ppc40x @!TARGET_ixp4xx @!TARGET_rdc @!TARGET_uml
+ KCONFIG:= \
+ CONFIG_RFKILL \
+ CONFIG_RFKILL_INPUT \
+ CONFIG_RFKILL_LEDS=y
+ FILES:= \
+ $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/rfkill/rfkill-input.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
+endef
+
+define KernelPackage/rfkill/description
+ Say Y here if you want to have control over RF switches
+ found on many WiFi and Bluetooth cards.
+endef
+
+$(eval $(call KernelPackage,rfkill))
+
+
+define KernelPackage/rtc-core
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Kernel support for RTC devices
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:= \
+ CONFIG_RTC_CLASS \
+ CONFIG_RTC_LIB \
+ CONFIG_RTC_HCTOSYS=y \
+ CONFIG_RTC_HCTOSYS_DEVICE=rtc0
+ FILES:= \
+ $(LINUX_DIR)/drivers/rtc/rtc-core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/rtc/rtc-lib.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,rtc-lib rtc-core)
+endef
+
+define KernelPackage/rtc-core/description
+ Kernel module for the RTC devices.
+endef
+
+$(eval $(call KernelPackage,rtc-core))
+
+define KernelPackage/rtc-m48t86
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RTC M48T86 / Dallas DS12887
+ DEPENDS:=+kmod-rtc-core
+ KCONFIG:=CONFIG_RTC_DRV_M48T86
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-m48t86.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,31,rtc-m48t86)
+endef
+
+define KernelPackage/rtc-m48t86/description
+ Kernel support for the RTC device M48T86 / Dallas DS12887
+endef
+
+$(eval $(call KernelPackage,rtc-m48t86))
projects / openwrt.git / blobdiff