upgrade orion to 2.6.26-rc7
[openwrt.git] / target / linux / ixp4xx / patches-2.6.24 / 030-ixp4xx_fsg_board_support.patch
index be72505..bf77df7 100644 (file)
@@ -1,8 +1,8 @@
-Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
 ===================================================================
---- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig     2008-03-20 21:07:50.000000000 +1030
-+++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig  2008-03-20 21:09:12.000000000 +1030
-@@ -125,6 +125,15 @@
+--- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
++++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
+@@ -125,6 +125,15 @@ config    ARCH_IXDP4XX
        depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
        default y
  
@@ -18,11 +18,11 @@ Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
  #
  # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
  #
-Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
 ===================================================================
---- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile    2008-03-20 21:07:50.000000000 +1030
-+++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-20 21:09:12.000000000 +1030
-@@ -15,6 +15,7 @@
+--- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
++++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
+@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)               += nas10
  obj-pci-$(CONFIG_MACH_DSMG600)                += dsmg600-pci.o
  obj-pci-$(CONFIG_MACH_GATEWAY7001)    += gateway7001-pci.o
  obj-pci-$(CONFIG_MACH_WG302V2)                += wg302v2-pci.o
@@ -30,17 +30,17 @@ Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
  
  obj-y += common.o
  
-@@ -28,5 +29,6 @@
+@@ -28,5 +29,6 @@ obj-$(CONFIG_MACH_NAS100D)   += nas100d-se
  obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
  obj-$(CONFIG_MACH_GATEWAY7001)        += gateway7001-setup.o
  obj-$(CONFIG_MACH_WG302V2)    += wg302v2-setup.o
 +obj-$(CONFIG_MACH_FSG)                += fsg-setup.o
  
  obj-$(CONFIG_PCI)             += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-pci.c
+Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-pci.c
 ===================================================================
---- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-ixp4xx/fsg-pci.c        2008-03-20 21:09:12.000000000 +1030
+--- /dev/null
++++ linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-pci.c
 @@ -0,0 +1,71 @@
 +/*
 + * arch/arch/mach-ixp4xx/fsg-pci.c
@@ -113,10 +113,10 @@ Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-pci.c
 +}
 +
 +subsys_initcall(fsg_pci_init);
-Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-setup.c
+Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-setup.c
 ===================================================================
---- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/arch/arm/mach-ixp4xx/fsg-setup.c      2008-03-20 21:09:12.000000000 +1030
+--- /dev/null
++++ linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-setup.c
 @@ -0,0 +1,275 @@
 +/*
 + * arch/arm/mach-ixp4xx/fsg-setup.c
@@ -393,10 +393,10 @@ Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-setup.c
 +      .init_machine   = fsg_init,
 +MACHINE_END
 +
-Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/fsg.h
+Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/fsg.h
 ===================================================================
---- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/include/asm-arm/arch-ixp4xx/fsg.h     2008-03-20 21:09:12.000000000 +1030
+--- /dev/null
++++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/fsg.h
 @@ -0,0 +1,50 @@
 +/*
 + * include/asm-arm/arch-ixp4xx/fsg.h
@@ -448,10 +448,10 @@ Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/fsg.h
 +#define FSG_LED_USB_BIT               4
 +#define FSG_LED_RING_BIT      5
 +#define FSG_LED_SYNC_BIT      7
-Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/hardware.h
+Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
 ===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/hardware.h   2008-03-20 21:07:50.000000000 +1030
-+++ linux-2.6.24/include/asm-arm/arch-ixp4xx/hardware.h        2008-03-20 21:09:12.000000000 +1030
+--- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/hardware.h
++++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
 @@ -45,5 +45,6 @@
  #include "nslu2.h"
  #include "nas100d.h"
@@ -459,10 +459,10 @@ Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/hardware.h
 +#include "fsg.h"
  
  #endif  /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/irqs.h
+Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/irqs.h
 ===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/irqs.h       2008-03-20 21:07:50.000000000 +1030
-+++ linux-2.6.24/include/asm-arm/arch-ixp4xx/irqs.h    2008-03-20 21:09:12.000000000 +1030
+--- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/irqs.h
++++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/irqs.h
 @@ -128,4 +128,11 @@
  #define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
  #define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
@@ -475,11 +475,11 @@ Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/irqs.h
 +#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
 +
  #endif
-Index: linux-2.6.24/drivers/leds/Kconfig
+Index: linux-2.6.24.7/drivers/leds/Kconfig
 ===================================================================
---- linux-2.6.24.orig/drivers/leds/Kconfig     2008-03-20 21:07:50.000000000 +1030
-+++ linux-2.6.24/drivers/leds/Kconfig  2008-03-20 21:09:12.000000000 +1030
-@@ -48,6 +48,12 @@
+--- linux-2.6.24.7.orig/drivers/leds/Kconfig
++++ linux-2.6.24.7/drivers/leds/Kconfig
+@@ -48,6 +48,12 @@ config LEDS_IXP4XX
          particular board must have LEDs and they must be connected
          to the GPIO lines.  If unsure, say Y.
  
@@ -492,11 +492,11 @@ Index: linux-2.6.24/drivers/leds/Kconfig
  config LEDS_TOSA
        tristate "LED Support for the Sharp SL-6000 series"
        depends on LEDS_CLASS && PXA_SHARPSL
-Index: linux-2.6.24/drivers/leds/Makefile
+Index: linux-2.6.24.7/drivers/leds/Makefile
 ===================================================================
---- linux-2.6.24.orig/drivers/leds/Makefile    2008-03-20 21:07:50.000000000 +1030
-+++ linux-2.6.24/drivers/leds/Makefile 2008-03-20 21:09:56.000000000 +1030
-@@ -20,6 +20,7 @@
+--- linux-2.6.24.7.orig/drivers/leds/Makefile
++++ linux-2.6.24.7/drivers/leds/Makefile
+@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE)               += leds-
  obj-$(CONFIG_LEDS_COBALT_RAQ)         += leds-cobalt-raq.o
  obj-$(CONFIG_LEDS_GPIO)                       += leds-gpio.o
  obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
@@ -504,10 +504,10 @@ Index: linux-2.6.24/drivers/leds/Makefile
  
  # LED Triggers
  obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
-Index: linux-2.6.24/drivers/leds/leds-fsg.c
+Index: linux-2.6.24.7/drivers/leds/leds-fsg.c
 ===================================================================
---- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.24/drivers/leds/leds-fsg.c       2008-03-20 21:09:12.000000000 +1030
+--- /dev/null
++++ linux-2.6.24.7/drivers/leds/leds-fsg.c
 @@ -0,0 +1,261 @@
 +/*
 + * LED Driver for the Freecom FSG-3
This page took 0.027441 seconds and 4 git commands to generate.