[adm5120] add definitions for RouterBOARD 150, no NAND driver yet

[openwrt.git] / target / linux / adm5120-2.6 / files / arch / mips / adm5120 / boards / zyxel.c

diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c
index f6cdc8a..25e5a31 100644 (file)
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c
@@ -55,9 +55,18 @@ static struct mtd_partition p33x_partitions[] = {
                .offset = MTDPART_OFS_APPEND,
                .size   = 16*1024,
        } , {
-               .name   = "firmware",
+               .name   = "bootext",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 96*1024,
+               .mask_flags = MTD_WRITEABLE,
+       } , {
+               .name   = "trx",
                .offset = MTDPART_OFS_APPEND,
                .size   = MTDPART_SIZ_FULL,
+       } , {
+               .name   = "firmware",
+               .offset = 32*1024,
+               .size   = MTDPART_SIZ_FULL,
        }
 };
 
@@ -83,10 +92,17 @@ static void __init p33x_setup(void)
        /* TODO: setup mac address */
 }
 
+unsigned char p33x_vlans[6] __initdata = {
+       /* FIXME: untested */
+       0x50, 0x48, 0x44, 0x42, 0x41, 0x00
+};
+
 static struct adm5120_board p334wt_board __initdata = {
        .mach_type      = MACH_ADM5120_P334WT,
        .name           = "ZyXEL Prestige 334WT",
        .board_setup    = p33x_setup,
+       .eth_num_ports  = 5,
+       .eth_vlans      = p33x_vlans,
        .num_devices    = ARRAY_SIZE(p334_devices),
        .devices        = p334_devices,
 };
@@ -95,6 +111,8 @@ static struct adm5120_board p335_board __initdata = {
        .mach_type      = MACH_ADM5120_P335,
        .name           = "ZyXEL Prestige 335/335WT",
        .board_setup    = p33x_setup,
+       .eth_num_ports  = 5,
+       .eth_vlans      = p33x_vlans,
        .num_devices    = ARRAY_SIZE(p335_devices),
        .devices        = p335_devices,
 };