strip the kernel version suffix from target directories, except for brcm-2.4 (the...
[openwrt.git] / target / linux / ixp4xx-2.6 / patches / 200-gateway_7001.patch
diff --git a/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch b/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch
deleted file mode 100644 (file)
index 8112bb8..0000000
+++ /dev/null
@@ -1,250 +0,0 @@
-diff -Nur linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S
---- linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S      2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S 2007-04-02 15:39:28.000000000 +0200
-@@ -46,6 +46,11 @@
-                orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
-+#ifdef  CONFIG_MACH_GATEWAY7001
-+               mov     r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
-+               orr     r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_IXP2000
-               mov     r1, #-1
-               mov     r0, #0xd6000000
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c      1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2007-04-02 15:39:28.000000000 +0200
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
-+ *
-+ * PCI setup routines for Gateway 7001
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *    Copyright (C) 2002 Jungo Software Technologies.
-+ *    Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init gateway7001_pci_preinit(void)
-+{
-+      set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+      set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+
-+      ixp4xx_pci_preinit();
-+}
-+
-+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+      if (slot == 1)
-+              return IRQ_IXP4XX_GPIO11;
-+      else if (slot == 2)
-+              return IRQ_IXP4XX_GPIO10;
-+      else return -1;
-+}
-+
-+struct hw_pci gateway7001_pci __initdata = {
-+      .nr_controllers = 1,
-+      .preinit =        gateway7001_pci_preinit,
-+      .swizzle =        pci_std_swizzle,
-+      .setup =          ixp4xx_setup,
-+      .scan =           ixp4xx_scan_bus,
-+      .map_irq =        gateway7001_map_irq,
-+};
-+
-+int __init gateway7001_pci_init(void)
-+{
-+      if (machine_is_gateway7001())
-+              pci_common_init(&gateway7001_pci);
-+      return 0;
-+}
-+
-+subsys_initcall(gateway7001_pci_init);
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c    1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c       2007-04-02 15:49:28.000000000 +0200
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/gateway7001-setup.c
-+ *
-+ * Board setup for the Gateway 7001 board
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data gateway7001_flash_data = {
-+      .map_name       = "cfi_probe",
-+      .width          = 2,
-+};
-+
-+static struct resource gateway7001_flash_resource = {
-+      .flags          = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device gateway7001_flash = {
-+      .name           = "IXP4XX-Flash",
-+      .id             = 0,
-+      .dev            = {
-+              .platform_data = &gateway7001_flash_data,
-+      },
-+      .num_resources  = 1,
-+      .resource       = &gateway7001_flash_resource,
-+};
-+
-+static struct resource gateway7001_uart_resource = {
-+      .start  = IXP4XX_UART2_BASE_PHYS,
-+      .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+      .flags  = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port gateway7001_uart_data[] = {
-+      {
-+              .mapbase        = IXP4XX_UART2_BASE_PHYS,
-+              .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+              .irq            = IRQ_IXP4XX_UART2,
-+              .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+              .iotype         = UPIO_MEM,
-+              .regshift       = 2,
-+              .uartclk        = IXP4XX_UART_XTAL,
-+      },
-+      { },
-+};
-+
-+static struct platform_device gateway7001_uart = {
-+      .name           = "serial8250",
-+      .id             = PLAT8250_DEV_PLATFORM,
-+      .dev                    = {
-+              .platform_data  = gateway7001_uart_data,
-+      },
-+      .num_resources  = 1,
-+      .resource       = &gateway7001_uart_resource,
-+};
-+
-+static struct platform_device *gateway7001_devices[] __initdata = {
-+      &gateway7001_flash,
-+      &gateway7001_uart
-+};
-+
-+static void __init gateway7001_init(void)
-+{
-+      ixp4xx_sys_init();
-+
-+      gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+      gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+      *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+      *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+      platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-+}
-+
-+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
-+      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+      .map_io         = ixp4xx_map_io,
-+      .init_irq       = ixp4xx_init_irq,
-+      .timer          = &ixp4xx_timer,
-+      .boot_params    = 0x0100,
-+      .init_machine   = gateway7001_init,
-+MACHINE_END
-+#endif
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig        2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig   2007-04-02 15:39:28.000000000 +0200
-@@ -33,6 +33,14 @@
-         Engineering Coyote Gateway Reference Platform. For more
-         information on this platform, see <file:Documentation/arm/IXP4xx>.
-+config MACH_GATEWAY7001
-+      bool "Gateway 7001"
-+      select PCI
-+      help
-+        Say 'Y' here if you want your kernel to support Gateway's 
-+        7001 Access Point. For more information on this platform,
-+        see http://openwrt.org
-+
- config ARCH_IXDP425
-       bool "IXDP425"
-       help
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile       2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile  2007-04-02 15:49:49.000000000 +0200
-@@ -11,6 +11,7 @@
- obj-pci-$(CONFIG_MACH_GTWX5715)               += gtwx5715-pci.o
- obj-pci-$(CONFIG_MACH_NSLU2)          += nslu2-pci.o
- obj-pci-$(CONFIG_MACH_NAS100D)                += nas100d-pci.o
-+obj-pci-$(CONFIG_MACH_GATEWAY7001)    += gateway7001-pci.o
- obj-y += common.o
-@@ -20,5 +21,6 @@
- obj-$(CONFIG_MACH_GTWX5715)   += gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2)      += nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D)    += nas100d-setup.o nas100d-power.o
-+obj-$(CONFIG_MACH_GATEWAY7001)        += gateway7001-setup.o
- obj-$(CONFIG_PCI)             += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h    2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h       2007-04-02 15:42:04.000000000 +0200
-@@ -38,9 +38,9 @@
- static __inline__ void __arch_decomp_setup(unsigned long arch_id)
- {
-       /*
--       * Coyote and gtwx5715 only have UART2 connected
-+       * Some boards are using UART2 as console
-        */
--      if (machine_is_adi_coyote() || machine_is_gtwx5715())
-+      if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
-               uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-       else
-               uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
This page took 0.027331 seconds and 4 git commands to generate.