ar71xx: ag71xx: poll PHY status of all available switch ports

[openwrt.git] / target / linux / ramips / patches-3.2 / 103-ethernet.patch

diff --git a/target/linux/ramips/patches-3.2/103-ethernet.patch b/target/linux/ramips/patches-3.2/103-ethernet.patch
index 8953f3b..429dfdc 100644 (file)
--- a/target/linux/ramips/patches-3.2/103-ethernet.patch
+++ b/target/linux/ramips/patches-3.2/103-ethernet.patch
@@ -1,29 +1,20 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -277,6 +277,16 @@ source "drivers/net/plip/Kconfig"
- 
- source "drivers/net/ppp/Kconfig"
- 
-+config MIPS_RAMIPS_NET
-+      tristate "Ethernet driver for rt288x/rt305x"
-+      depends on MIPS_RALINK
-+      help
-+        This driver supports the etehrnet mac inside the ralink wisocs
-+
-+config RAMIPS_ETH_DEBUG
-+      bool "Enable debug messages in the Ralink ethernet driver"
-+      depends on MIPS_RAMIPS_NET
-+
- source "drivers/net/slip/Kconfig"
- 
- source "drivers/s390/net/Kconfig"
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
- obj-$(CONFIG_PPPOE) += ppp/
- obj-$(CONFIG_PPPOL2TP) += ppp/
- obj-$(CONFIG_PPTP) += ppp/
-+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
- obj-$(CONFIG_SLIP) += slip/
- obj-$(CONFIG_SLHC) += slip/
- obj-$(CONFIG_NET_SB1000) += sb1000.o
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -143,6 +143,7 @@ source "drivers/net/ethernet/packetengin
+ source "drivers/net/ethernet/pasemi/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/racal/Kconfig"
++source "drivers/net/ethernet/ramips/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -53,6 +53,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
++obj-$(CONFIG_NET_RAMIPS) += ramips/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_SH_ETH) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/