[ar71xx] register a I2C GPIO expander on the PB44 board

[openwrt.git] / target / linux / ar7 / base-files / etc / config / network

diff --git a/target/linux/ar7/base-files/etc/config/network b/target/linux/ar7/base-files/etc/config/network
index b607a30..88ddee0 100644 (file)
--- a/target/linux/ar7/base-files/etc/config/network
+++ b/target/linux/ar7/base-files/etc/config/network
@@ -7,12 +7,12 @@ config interface loopback
        option netmask  255.0.0.0
 
 config interface lan
        option netmask  255.0.0.0
 
 config interface lan

+       option type     bridge

        option ifname   eth0
        option proto    static
        option ipaddr   192.168.1.1
        option netmask  255.255.255.0
        option ifname   eth0
        option proto    static
        option ipaddr   192.168.1.1
        option netmask  255.255.255.0

-
-
+       option nat      1

 
 ## Example for ATM bridging.
 ## Useful for PPPoE or IP over ATM. Will create 'nas${unit}'
 
 ## Example for ATM bridging.
 ## Useful for PPPoE or IP over ATM. Will create 'nas${unit}'


@@ -22,7 +22,7 @@ config interface lan
 #      option encaps   llc
 #      option vpi      8
 #      option vci      35
 #      option encaps   llc
 #      option vpi      8
 #      option vci      35

-#      option payload  routed # some ISPs need this set to 'bridged'
+#      option payload  bridged # some ISPs need this set to 'routed'

 
 
 # config interface wan
 
 
 # config interface wan