--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
-@@ -347,15 +347,12 @@
+@@ -347,15 +347,12 @@ necessarily be nonportable.
Dynamic definition of GPIOs is not currently standard; for example, as
a side effect of configuring an add-on board with some GPIO expanders.
As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
will be found there. That will list all the controllers registered through
-@@ -439,4 +436,120 @@
+@@ -439,4 +436,120 @@ becomes available. That may mean the de
calls for that GPIO can work. One way to address such dependencies is for
such gpio_chip controllers to provide setup() and teardown() callbacks to
board specific code; those board specific callbacks would register devices
+suitable for documenting as part of a board support package.
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
-@@ -1488,6 +1488,9 @@
+@@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void)
bank->chip.set = gpio_set;
if (bank_is_mpuio(bank)) {
bank->chip.label = "mpuio";
bank->chip.label = "gpio";
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -358,6 +358,8 @@
+@@ -358,6 +358,8 @@ static int __init pio_probe(struct platf
pio->chip.label = pio->name;
pio->chip.base = pdev->id * 32;
pio->chip.ngpio = 32;
pio->chip.get = gpio_get;
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -23,6 +23,21 @@
+@@ -23,6 +23,21 @@ config DEBUG_GPIO
slower. The diagnostics help catch the type of setup errors
that are most common when setting up new platforms or boards.
/* Optional implementation infrastructure for GPIO interfaces.
-@@ -44,6 +47,8 @@
+@@ -44,6 +47,8 @@ struct gpio_desc {
#define FLAG_REQUESTED 0
#define FLAG_IS_OUT 1
#define FLAG_RESERVED 2
#ifdef CONFIG_DEBUG_FS
const char *label;
-@@ -151,6 +156,486 @@
+@@ -151,6 +156,486 @@ err:
return ret;
}
/**
* gpiochip_add() - register a gpio_chip
* @chip: the chip to register, with chip->base initialized
-@@ -160,6 +645,11 @@
+@@ -160,6 +645,11 @@ err:
* because the chip->base is invalid or already associated with a
* different chip. Otherwise it returns zero as a success code.
*
* If chip->base is negative, this requests dynamic assignment of
* a range of valid GPIOs.
*/
-@@ -182,7 +672,7 @@
+@@ -182,7 +672,7 @@ int gpiochip_add(struct gpio_chip *chip)
base = gpiochip_find_base(chip->ngpio);
if (base < 0) {
status = base;
}
chip->base = base;
}
-@@ -197,12 +687,23 @@
+@@ -197,12 +687,23 @@ int gpiochip_add(struct gpio_chip *chip)
if (status == 0) {
for (id = base; id < base + chip->ngpio; id++) {
gpio_desc[id].chip = chip;
fail:
/* failures here can mean systems won't boot... */
if (status)
-@@ -239,6 +740,10 @@
+@@ -239,6 +740,10 @@ int gpiochip_remove(struct gpio_chip *ch
}
spin_unlock_irqrestore(&gpio_lock, flags);
return status;
}
EXPORT_SYMBOL_GPL(gpiochip_remove);
-@@ -296,6 +801,8 @@
+@@ -296,6 +801,8 @@ void gpio_free(unsigned gpio)
return;
}
spin_lock_irqsave(&gpio_lock, flags);
desc = &gpio_desc[gpio];
-@@ -534,10 +1041,6 @@
+@@ -534,10 +1041,6 @@ EXPORT_SYMBOL_GPL(gpio_set_value_canslee
#ifdef CONFIG_DEBUG_FS
static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
unsigned i;
-@@ -614,17 +1117,28 @@
+@@ -614,17 +1117,28 @@ static int gpiolib_show(struct seq_file
/* REVISIT this isn't locked against gpio_chip removal ... */
for (gpio = 0; gpio_is_valid(gpio); gpio++) {
chip->dbg_show(s, chip);
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
-@@ -239,6 +239,7 @@
+@@ -239,6 +239,7 @@ static int mcp23s08_probe(struct spi_dev
mcp->chip.base = pdata->base;
mcp->chip.ngpio = 8;
mcp->chip.can_sleep = 1;
spi_set_drvdata(spi, mcp);
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
-@@ -188,6 +188,7 @@
+@@ -188,6 +188,7 @@ static void pca953x_setup_gpio(struct pc
gc->base = chip->gpio_start;
gc->ngpio = gpios;
gc->label = chip->client->name;
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
-@@ -175,6 +175,7 @@
+@@ -175,6 +175,7 @@ static int pcf857x_probe(struct i2c_clie
gpio->chip.base = pdata->gpio_base;
gpio->chip.can_sleep = 1;
/* NOTE: the OnSemi jlc1562b is also largely compatible with
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
-@@ -636,6 +636,8 @@
+@@ -636,6 +636,8 @@ static int tps65010_probe(struct i2c_cli
tps->outmask = board->outmask;
tps->chip.label = client->name;
tps->chip.direction_output = tps65010_output;
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
-@@ -318,6 +318,8 @@
+@@ -318,6 +318,8 @@ static int __init egpio_probe(struct pla
ei->chip[i].dev = &(pdev->dev);
chip = &(ei->chip[i].chip);
chip->label = "htc-egpio";
chip->direction_input = egpio_direction_input;
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
-@@ -32,6 +32,8 @@
+@@ -32,6 +32,8 @@ struct module;
/**
* struct gpio_chip - abstract a GPIO controller
* @label: for diagnostics
* @direction_input: configures signal "offset" as input, or returns error
* @get: returns value for signal "offset"; for output signals this
* returns either the value actually sensed, or zero
-@@ -59,6 +61,7 @@
+@@ -59,6 +61,7 @@ struct module;
*/
struct gpio_chip {
char *label;
struct module *owner;
int (*direction_input)(struct gpio_chip *chip,
-@@ -74,6 +77,7 @@
+@@ -74,6 +77,7 @@ struct gpio_chip {
int base;
u16 ngpio;
unsigned can_sleep:1;
};
extern const char *gpiochip_is_requested(struct gpio_chip *chip,
-@@ -108,7 +112,18 @@
+@@ -108,7 +112,18 @@ extern void __gpio_set_value(unsigned gp
extern int __gpio_cansleep(unsigned gpio);
static inline int gpio_is_valid(int number)
{
-@@ -137,6 +152,22 @@
+@@ -137,6 +152,22 @@ static inline void gpio_set_value_cansle
gpio_set_value(gpio, value);
}
#endif /* _ASM_GENERIC_GPIO_H */
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
-@@ -79,6 +79,19 @@
+@@ -79,6 +79,19 @@ static inline void gpio_set_value_cansle
WARN_ON(1);
}
projects / openwrt.git / blobdiff