#############################################################
+# $Id$
#
# Linux kernel target for the OpenWRT project
#
# patches are sorted by numbers
-# 000 patch between linux-2.4.29 and linux-mips-cvs
+# 000 patch between linux-2.4.xx and linux-mips-cvs
# 0xx linksys patches
# 1xx OpenWRT patches (diag,compressed,..)
-# 2xx fixes for 2.4.29 integration (wl driver)
+# 2xx fixes for wl driver integration
# 3xx kernel feature patches (squashfs,jffs2 compression,..)
# 4xx patches needed to integrate feature patches
#
#############################################################
-ifneq ($(filter $(TARGETS),linux),)
LINUX_FORMAT=zImage
LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
-e 's/sh[234]/sh/' \
)
-LINUX_VERSION=2.4.29
-LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.4
+LINUX_BINARY_DRIVER_SITE=http://openwrt.openbsd-geek.de
LINUX_SOURCE=linux-$(LINUX_VERSION).tar.bz2
-LINUX_KCONFIG=package/linux/linux.config
-LINUX_KERNEL=$(BUILD_DIR)/buildroot-kernel
-LINUX_BINLOC=arch/$(LINUX_KARCH)/brcm-boards/bcm947xx/compressed/vmlinuz
+LINUX_KCONFIG=./linux.config
+LINUX_PATCHES=./kernel-patches
+LINUX_KERNEL_SOURCE=./kernel-source
+LINUX_BINLOC=arch/$(LINUX_KARCH)/brcm-boards/bcm947xx/compressed/piggy
# Used by pcmcia-cs and others
-LINUX_SOURCE_DIR=$(LINUX_DIR)
+LINUX_SOURCE_DIR=$(LINUX_DIR)-$(LINUX_VERSION)
-# kernel stuff extracted from linksys firmware GPL sourcetree
-# WRT54GS_3_37_2_1109_US (shared,include,wl,et)
-LINKSYS_KERNEL_TGZ=linksys-kernel.tar.gz
+# proprietary driver extracted from linksys firmware GPL sourcetree WRT54GS_3_37_2_1109_US
+LINUX_BINARY_WL_DRIVER=kernel-binary-wl-0.2.tar.gz
+LINUX_BINARY_WL_MD5SUM=ab2a6d39ccb550e494bbeccf1b0e228f
+LINUX_ET_DRIVER=kernel-source-et-0.6.tar.gz
+LINUX_ET_MD5SUM=b7883403d3c1ce7b73c362db621c6f00
TARGET_MODULES_DIR=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
-$(DL_DIR)/$(LINUX_SOURCE):
- -mkdir -p $(DL_DIR)
- $(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
+$(DL_DIR)/$(LINUX_BINARY_WL_DRIVER):
+ $(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_BINARY_WL_DRIVER) $(LINUX_BINARY_WL_MD5SUM) $(LINUX_BINARY_DRIVER_SITE)
-$(DL_DIR)/$(LINKSYS_KERNEL_TGZ):
- $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_KERNEL_TGZ)
+$(DL_DIR)/$(LINUX_ET_DRIVER):
+ $(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_ET_DRIVER) $(LINUX_ET_MD5SUM) $(LINUX_BINARY_DRIVER_SITE)
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINKSYS_KERNEL_TGZ)
+$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) $(DL_DIR)/$(LINUX_ET_DRIVER)
-mkdir -p $(BUILD_DIR)
- (cd $(BUILD_DIR); tar jxvf $(DL_DIR)/$(LINUX_SOURCE))
- -mkdir -p $(TOOL_BUILD_DIR)
- -(cd $(TOOL_BUILD_DIR); ln -sf $(LINUX_DIR) linux)
- toolchain/patch-kernel.sh $(LINUX_DIR) package/linux/kernel-patches
- -cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
- # extract linksys binary kernel stuff and include/shared files
- zcat $(DL_DIR)/$(LINKSYS_KERNEL_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ ln -sf $(LINUX_DIR)-$(LINUX_VERSION) $(LINUX_DIR)
+ zcat $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ zcat $(DL_DIR)/$(LINUX_ET_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
touch $(LINUX_DIR)/.unpacked
-$(LINUX_KCONFIG):
- @if [ ! -f "$(LINUX_KCONFIG)" ] ; then \
- echo ""; \
- echo "You should create a .config for your kernel"; \
- echo "and install it as $(LINUX_KCONFIG)"; \
- echo ""; \
- sleep 5; \
- fi;
-
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
- $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
- $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/arch/mips/Makefile
+$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
+ $(PATCH) $(LINUX_DIR) $(LINUX_PATCHES)
+ # copy kernel source which is maintained in openwrt via cvs
+ cp -a $(LINUX_KERNEL_SOURCE)/* $(LINUX_DIR)
+ # copy binary wlan driver
+ cp -a $(BUILD_DIR)/wl/*.o $(LINUX_DIR)/drivers/net/wl
+ # copy proprietary et source
+ cp -a $(BUILD_DIR)/et/* $(LINUX_DIR)/drivers/net/et
+ cp -a $(BUILD_DIR)/et/*.h $(LINUX_DIR)/include/
+ $(SED) 's/@expr length/@-expr length/' $(LINUX_DIR)/Makefile
+ touch $(LINUX_DIR)/.patched
+
+$(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched
+ -cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
+ $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" \
+ $(LINUX_DIR)/Makefile \
+ $(LINUX_DIR)/arch/mips/Makefile
$(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile
$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) oldconfig include/linux/version.h
touch $(LINUX_DIR)/.configured
touch $(LINUX_DIR)/.depend_done
$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) $(LINUX_FORMAT)
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) modules
+ $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) CFLAGS_KERNEL="-fno-delayed-branch " $(LINUX_FORMAT)
$(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC)
- cp -fa $(LINUX_DIR)/$(LINUX_BINLOC) $(LINUX_KERNEL)
+ cp -fa $< $@
touch -c $(LINUX_KERNEL)
+
+$(LINUX_IMAGE): $(LINUX_KERNEL)
+ cat $^ | $(BUILD_DIR)/lzma/lzma e -si -so -eos > $@ || (rm -f $@ && false)
-$(LINUX_DIR)/.modules_done: $(LINUX_KERNEL)
+$(LINUX_DIR)/.modules_done: $(LINUX_KERNEL) $(LINUX_IMAGE)
rm -rf $(BUILD_DIR)/modules
+ $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) CFLAGS_KERNEL="-fno-delayed-branch " modules
$(MAKE) -C $(LINUX_DIR) DEPMOD=true INSTALL_MOD_PATH=$(BUILD_DIR)/modules modules_install
- tar -C $(BUILD_DIR)/modules/lib -cjf openwrt-kmodules.tar.bz2 modules
touch $(LINUX_DIR)/.modules_done
-
$(STAGING_DIR)/include/linux/version.h: $(LINUX_DIR)/.configured
mkdir -p $(STAGING_DIR)/include
tar -ch -C $(LINUX_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/include/
tar -ch -C $(LINUX_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/include/
-linux: $(LINUX_DIR)/.modules_done $(TARGET_MODULES_DIR)
-
$(TARGET_MODULES_DIR):
-mkdir -p $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/wl/wl.o $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/et/et.o $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/diag/diag.o $(TARGET_MODULES_DIR)
+
+linux: $(LINUX_DIR)/.modules_done $(TARGET_MODULES_DIR)
linux-source: $(DL_DIR)/$(LINUX_SOURCE)
# This has been renamed so we do _NOT_ by default run this on 'make clean'
linuxclean: clean
- rm -f $(LINUX_KERNEL)
+ rm -f $(LINUX_KERNEL) $(LINUX_IMAGE)
-$(MAKE) -C $(LINUX_DIR) clean
linux-dirclean:
+ rm -f $(BUILD_DIR)/openwrt-kmodules.tar.bz2
+ rm -rf $(LINUX_DIR)-$(LINUX_VERSION)
rm -rf $(LINUX_DIR)
+ rm -rf $(BUILD_DIR)/modules
+ rm -rf $(BUILD_DIR)/wl
+ rm -rf $(BUILD_DIR)/et
-linux-headers: $(LINUX_DIR)/.configured
-
-endif
projects / openwrt.git / blobdiff