* Netgear WNDR3700 board support
*
* Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
-#include <linux/rtl8366_smi.h>
+#include <linux/rtl8366s.h>
#include <asm/mach-ar71xx/ar71xx.h>
#define WNDR3700_GPIO_LED_POWER_ORANGE 1
#define WNDR3700_GPIO_LED_POWER_GREEN 2
#define WNDR3700_GPIO_LED_WPS_GREEN 4
+#define WNDR3700_GPIO_LED_WAN_GREEN 6
#define WNDR3700_GPIO_BTN_WPS 3
#define WNDR3700_GPIO_BTN_RESET 8
#define WNDR3700_BUTTONS_POLL_INTERVAL 20
+#define WNDR3700_ETH0_MAC_OFFSET 0
+#define WNDR3700_ETH1_MAC_OFFSET 0x6
+
#define WNDR3700_WMAC0_MAC_OFFSET 0
#define WNDR3700_WMAC1_MAC_OFFSET 0xc
#define WNDR3700_CALDATA0_OFFSET 0x1000
.name = "wndr3700:orange:wps",
.gpio = WNDR3700_GPIO_LED_WPS_ORANGE,
.active_low = 1,
+ }, {
+ .name = "wndr3700:green:wan",
+ .gpio = WNDR3700_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
}
};
{
.desc = "reset",
.type = EV_KEY,
- .code = BTN_0,
- .threshold = 5,
+ .code = KEY_RESTART,
+ .threshold = 3,
.gpio = WNDR3700_GPIO_BTN_RESET,
+ .active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
- .code = BTN_1,
- .threshold = 5,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
.gpio = WNDR3700_GPIO_BTN_WPS,
+ .active_low = 1,
} , {
.desc = "wifi",
.type = EV_KEY,
.code = BTN_2,
- .threshold = 5,
+ .threshold = 3,
.gpio = WNDR3700_GPIO_BTN_WIFI,
+ .active_low = 1,
}
};
-static struct rtl8366_smi_platform_data wndr3700_rtl8366_smi_data = {
+static struct rtl8366s_platform_data wndr3700_rtl8366s_data = {
.gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
.gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
};
-static struct platform_device wndr3700_rtl8366_smi_device = {
- .name = "rtl8366-smi",
+static struct platform_device wndr3700_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
.id = -1,
.dev = {
- .platform_data = &wndr3700_rtl8366_smi_data,
+ .platform_data = &wndr3700_rtl8366s_data,
}
};
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- ar71xx_set_mac_base(art);
-
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr,
+ art + WNDR3700_ETH0_MAC_OFFSET, 0);
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
- ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
+ ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr,
+ art + WNDR3700_ETH1_MAC_OFFSET, 0);
ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
- ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
+ ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
ARRAY_SIZE(wndr3700_gpio_buttons),
wndr3700_gpio_buttons);
- platform_device_register(&wndr3700_rtl8366_smi_device);
+ platform_device_register(&wndr3700_rtl8366s_device);
platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
+ ap94_pci_enable_quirk_wndr3700();
ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
art + WNDR3700_WMAC0_MAC_OFFSET,
art + WNDR3700_CALDATA1_OFFSET,
art + WNDR3700_WMAC1_MAC_OFFSET);
}
-MIPS_MACHINE(AR71XX_MACH_WNDR3700, "NETGEAR WNDR3700", wndr3700_setup);
+MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700",
+ wndr3700_setup);