[atheros] add kernel 2.6.34 support, refresh patches

[openwrt.git] / target / linux / x86 / image / Makefile

diff --git a/target/linux/x86/image/Makefile b/target/linux/x86/image/Makefile
index b412873..2a6a2e3 100644 (file)
--- a/target/linux/x86/image/Makefile
+++ b/target/linux/x86/image/Makefile
@@ -1,5 +1,5 @@
 # 
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -20,22 +20,43 @@ ROOTPART=$(strip $(subst ",, $(CONFIG_OLPC_BOOTSCRIPT_ROOTPART)))
 endif
 #"))")) # fix vim's broken syntax highlighting
 
+GRUB_TERMINALS =
+GRUB_SERIAL_CONFIG =
+GRUB_TERMINAL_CONFIG =
+GRUB_CONSOLE_CMDLINE =
+
+ifeq ($(CONFIG_X86_GRUB_CONSOLE),y)
+GRUB_CONSOLE_CMDLINE += console=tty0
+GRUB_TERMINALS += console
+endif
+
+ifneq ($(CONFIG_X86_GRUB_SERIAL),)
+GRUB_CONSOLE_CMDLINE += console=$(strip $(subst ",, $(CONFIG_X86_GRUB_SERIAL))),$(CONFIG_X86_GRUB_BAUDRATE)n8
+GRUB_SERIAL_CONFIG = serial --unit=0 --speed=$(CONFIG_X86_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
+GRUB_TERMINALS += serial
+endif
+
+ifneq ($(GRUB_TERMINALS),)
+GRUB_TERMINAL_CONFIG = terminal --timeout=2 $(GRUB_TERMINALS)
+endif
+
+
 ifeq ($(CONFIG_X86_GRUB_IMAGES),y)
 ifneq ($(HOST_OS),Darwin)
   define Image/cmdline/squashfs
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs
+    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootwait
   endef
 
   define Image/cmdline/jffs2-64k
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2
+    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
   endef
 
   define Image/cmdline/jffs2-128k
-    block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2
+    block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
   endef
 
   define Image/cmdline/ext2
-    root=$(ROOTPART) rootfstype=ext2
+    root=$(ROOTPART) rootfstype=ext2 rootwait
   endef
   
   define Image/Build/grub
@@ -46,10 +67,11 @@ ifneq ($(HOST_OS),Darwin)
                $(KDIR)/root.grub/boot/grub/
        $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
        sed \
-               -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
-               -e 's#@BAUDRATE@#$(CONFIG_X86_GRUB_BAUDRATE)#g' \
+               -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+               -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+               -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
                ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
-       PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+       PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh $(BIN_DIR)/$(IMG_PREFIX)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
        $(call Image/Build/grub/$(1))
   endef
 
@@ -63,7 +85,7 @@ ifneq ($(HOST_OS),Darwin)
   endef
 else
   define Image/Build/grub
-       PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" NOGRUB=1 ./gen_image_x86.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) "" $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+       PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" NOGRUB=1 ./gen_image_x86.sh $(BIN_DIR)/$(IMG_PREFIX)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) "" $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
   endef
 endif
 endif
@@ -72,8 +94,8 @@ ifeq ($(CONFIG_X86_VDI_IMAGES),y)
   define Image/Build/vdi
     # left here because the image builder doesnt need these
     ifeq ($(1),ext2)
-               rm $(BIN_DIR)/openwrt-$(BOARD)-ext2.vdi || true
-               VBoxManage convertfromraw -format VDI $(BIN_DIR)/openwrt-$(BOARD)-ext2.image $(BIN_DIR)/openwrt-$(BOARD)-ext2.vdi
+               rm $(BIN_DIR)/$(IMG_PREFIX)-ext2.vdi || true
+               VBoxManage convertfromraw -format VDI $(BIN_DIR)/$(IMG_PREFIX)-ext2.image $(BIN_DIR)/$(IMG_PREFIX)-ext2.vdi
     endif
   endef
 endif
@@ -82,9 +104,9 @@ ifeq ($(CONFIG_X86_VMDK_IMAGES),y)
   define Image/Build/vmdk
     # left here because the image builder doesnt need these
     ifeq ($(1),ext2)
-               rm $(BIN_DIR)/openwrt-$(BOARD)-ext2.vmdk || true
-               qemu-img convert -f raw $(BIN_DIR)/openwrt-$(BOARD)-ext2.image \
-                       -O vmdk $(BIN_DIR)/openwrt-$(BOARD)-ext2.vmdk
+               rm $(BIN_DIR)/$(IMG_PREFIX)-ext2.vmdk || true
+               qemu-img convert -f raw $(BIN_DIR)/$(IMG_PREFIX)-ext2.image \
+                       -O vmdk $(BIN_DIR)/$(IMG_PREFIX)-ext2.vmdk
     endif
   endef
 endif
@@ -114,7 +136,7 @@ ifeq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),y)
        $(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
        sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
                ./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
-       PADDING="$(CONFIG_OLPC_BOOTSCRIPT_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_OLPC_BOOTSCRIPT_KERNELPART) $(KDIR)/root.bootscript $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+       PADDING="$(CONFIG_OLPC_BOOTSCRIPT_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh $(BIN_DIR)/$(IMG_PREFIX)-$(1).image $(CONFIG_OLPC_BOOTSCRIPT_KERNELPART) $(KDIR)/root.bootscript $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
   endef
 endif
 
@@ -137,8 +159,9 @@ define Image/Build/iso
                $(STAGING_DIR_HOST)/usr/lib/grub/i386-openwrt/stage2_eltorito \
                $(KDIR)/root.grub/boot/grub/stage2_eltorito 
        sed \
-               -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
-               -e 's#@BAUDRATE@#$(CONFIG_X86_GRUB_BAUDRATE)#g' \
+               -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+               -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+               -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
                -e 's#(hd0,0)#(cd)#g' \
                ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
        $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz 
@@ -147,19 +170,22 @@ define Image/Build/iso
 endef 
 
 define Image/BuildKernel
-       $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
+       $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
 endef
 
 define Image/Build
        $(call Image/Build/$(1))
        $(call Image/Build/bootscript,$(1))
-ifneq ($(1),iso)
+  ifneq ($(1),iso)
        $(call Image/Build/grub,$(1))
        $(call Image/Build/vdi,$(1))
        $(call Image/Build/vmdk,$(1))
-endif
-       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1).fs
-       $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
+  endif
+       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1).fs
+       $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
+  ifeq ($(1),ext2)
+       gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-$(1).image
+  endif
 endef
 
 $(eval $(call BuildImage))