mac80211: fill some important capabilities into ht_capab in the hostapd config

[openwrt.git] / package / busybox / config / shell / Config.in

diff --git a/package/busybox/config/shell/Config.in b/package/busybox/config/shell/Config.in
index d2b1056..233c3a8 100644 (file)
--- a/package/busybox/config/shell/Config.in
+++ b/package/busybox/config/shell/Config.in
@@ -20,9 +20,9 @@ config BUSYBOX_CONFIG_FEATURE_SH_IS_HUSH
        select BUSYBOX_CONFIG_HUSH
        bool "hush"
 
        select BUSYBOX_CONFIG_HUSH
        bool "hush"
 

-config BUSYBOX_CONFIG_FEATURE_SH_IS_LASH
-       select BUSYBOX_CONFIG_LASH
-       bool "lash"
+####config FEATURE_SH_IS_LASH
+####   select LASH
+####   bool "lash"

 
 config BUSYBOX_CONFIG_FEATURE_SH_IS_MSH
        select BUSYBOX_CONFIG_MSH
 
 config BUSYBOX_CONFIG_FEATURE_SH_IS_MSH
        select BUSYBOX_CONFIG_MSH


@@ -36,17 +36,23 @@ endchoice
 config BUSYBOX_CONFIG_ASH
        bool "ash"
        default y
 config BUSYBOX_CONFIG_ASH
        bool "ash"
        default y

-       select BUSYBOX_CONFIG_TEST

        help
          Tha 'ash' shell adds about 60k in the default configuration and is
          the most complete and most pedantically correct shell included with
        help
          Tha 'ash' shell adds about 60k in the default configuration and is
          the most complete and most pedantically correct shell included with

-         busybox.  This shell is actually a derivative of the Debian 'dash'
+         busybox. This shell is actually a derivative of the Debian 'dash'

          shell (by Herbert Xu), which was created by porting the 'ash' shell
          (written by Kenneth Almquist) from NetBSD.
 
 comment "Ash Shell Options"
        depends on BUSYBOX_CONFIG_ASH
 
          shell (by Herbert Xu), which was created by porting the 'ash' shell
          (written by Kenneth Almquist) from NetBSD.
 
 comment "Ash Shell Options"
        depends on BUSYBOX_CONFIG_ASH
 

+config BUSYBOX_CONFIG_ASH_BASH_COMPAT
+       bool "bash-compatible extensions"
+       default y
+       depends on BUSYBOX_CONFIG_ASH
+       help
+         Enable bash-compatible extensions.
+

 config BUSYBOX_CONFIG_ASH_JOB_CONTROL
        bool "Job control"
        default y
 config BUSYBOX_CONFIG_ASH_JOB_CONTROL
        bool "Job control"
        default y


@@ -63,7 +69,7 @@ config BUSYBOX_CONFIG_ASH_READ_NCHARS
          'read -s' will read without echoing the user's input.
 
 config BUSYBOX_CONFIG_ASH_READ_TIMEOUT
          'read -s' will read without echoing the user's input.
 
 config BUSYBOX_CONFIG_ASH_READ_TIMEOUT

-       bool "'read -t S' support."
+       bool "'read -t S' support"

        default y
        depends on BUSYBOX_CONFIG_ASH
        help
        default y
        depends on BUSYBOX_CONFIG_ASH
        help


@@ -78,22 +84,6 @@ config BUSYBOX_CONFIG_ASH_ALIAS
        help
          Enable alias support in the ash shell.
 
        help
          Enable alias support in the ash shell.
 

-config BUSYBOX_CONFIG_ASH_MATH_SUPPORT
-       bool "Posix math support"
-       default y
-       depends on BUSYBOX_CONFIG_ASH
-       help
-         Enable math support in the ash shell.
-
-config BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64
-       bool "Extend Posix math support to 64 bit"
-       default y
-       depends on BUSYBOX_CONFIG_ASH_MATH_SUPPORT
-       help
-         Enable 64-bit math support in the ash shell.  This will make
-         the shell slightly larger, but will allow computation with very
-         large numbers.
-

 config BUSYBOX_CONFIG_ASH_GETOPTS
        bool "Builtin getopt to parse positional parameters"
        default y
 config BUSYBOX_CONFIG_ASH_GETOPTS
        bool "Builtin getopt to parse positional parameters"
        default y


@@ -104,15 +94,20 @@ config BUSYBOX_CONFIG_ASH_GETOPTS
 config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO
        bool "Builtin version of 'echo'"
        default y
 config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO
        bool "Builtin version of 'echo'"
        default y

-       select BUSYBOX_CONFIG_ECHO

        depends on BUSYBOX_CONFIG_ASH
        help
          Enable support for echo, builtin to ash.
 
        depends on BUSYBOX_CONFIG_ASH
        help
          Enable support for echo, builtin to ash.
 

+config BUSYBOX_CONFIG_ASH_BUILTIN_PRINTF
+       bool "Builtin version of 'printf'"
+       default y
+       depends on BUSYBOX_CONFIG_ASH
+       help
+         Enable support for printf, builtin to ash.
+

 config BUSYBOX_CONFIG_ASH_BUILTIN_TEST
        bool "Builtin version of 'test'"
        default y
 config BUSYBOX_CONFIG_ASH_BUILTIN_TEST
        bool "Builtin version of 'test'"
        default y

-       select BUSYBOX_CONFIG_TEST

        depends on BUSYBOX_CONFIG_ASH
        help
          Enable support for test, builtin to ash.
        depends on BUSYBOX_CONFIG_ASH
        help
          Enable support for test, builtin to ash.


@@ -141,14 +136,14 @@ config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE
          Compile ash for reduced size at the price of speed.
 
 config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT
          Compile ash for reduced size at the price of speed.
 
 config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT

-       bool "Pseudorandom generator and variable $RANDOM"
+       bool "Pseudorandom generator and $RANDOM variable"

        default n
        depends on BUSYBOX_CONFIG_ASH
        help
          Enable pseudorandom generator and dynamic variable "$RANDOM".
          Each read of "$RANDOM" will generate a new pseudorandom value.
          You can reset the generator by using a specified start value.
        default n
        depends on BUSYBOX_CONFIG_ASH
        help
          Enable pseudorandom generator and dynamic variable "$RANDOM".
          Each read of "$RANDOM" will generate a new pseudorandom value.
          You can reset the generator by using a specified start value.

-         After "unset RANDOM" then generator will switch off and this
+         After "unset RANDOM" the generator will switch off and this

          variable will no longer have special treatment.
 
 config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
          variable will no longer have special treatment.
 
 config BUSYBOX_CONFIG_ASH_EXPAND_PRMT


@@ -156,25 +151,23 @@ config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
        default y
        depends on BUSYBOX_CONFIG_ASH
        help
        default y
        depends on BUSYBOX_CONFIG_ASH
        help

-         "PS#" may be contain volatile content, such as backquote commands.
+         "PS#" may contain volatile content, such as backquote commands.

          This option recreates the prompt string from the environment
          variable each time it is displayed.
 
 config BUSYBOX_CONFIG_HUSH
        bool "hush"
        default n
          This option recreates the prompt string from the environment
          variable each time it is displayed.
 
 config BUSYBOX_CONFIG_HUSH
        bool "hush"
        default n

-       select BUSYBOX_CONFIG_TRUE
-       select BUSYBOX_CONFIG_FALSE
-       select BUSYBOX_CONFIG_TEST

        help
        help

-         hush is a very small shell (just 18k) and it has fairly complete
-         Bourne shell grammar.  It even handles all the normal flow control
-         options such as if/then/elif/else/fi, for/in/do/done, while loops,
-         etc.
+         hush is a small shell (22k). It handles the normal flow control
+         constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
+         case/esac. Redirections, here documents, $((arithmetic))
+         and functions are supported.
+
+         It will compile and work on no-mmu systems.

 
 

-         It does not handle case/esac, select, function, here documents ( <<
-         word ), arithmetic expansion, aliases, brace expansion, tilde
-         expansion, &> and >& redirection of stdout+stderr, etc.
+         It does not handle select, aliases, brace expansion,
+         tilde expansion, &>file and >&file redirection of stdout+stderr.

 
 config BUSYBOX_CONFIG_HUSH_HELP
        bool "help builtin"
 
 config BUSYBOX_CONFIG_HUSH_HELP
        bool "help builtin"


@@ -225,38 +218,61 @@ config BUSYBOX_CONFIG_HUSH_LOOPS
        help
          Enable for, while and until loops in hush.
 
        help
          Enable for, while and until loops in hush.
 

-config BUSYBOX_CONFIG_LASH
-       bool "lash"
+config BUSYBOX_CONFIG_HUSH_CASE
+       bool "Support case ... esac statement"
+       default n
+       depends on BUSYBOX_CONFIG_HUSH
+       help
+         Enable case ... esac statement in hush. +400 bytes.
+
+config BUSYBOX_CONFIG_HUSH_FUNCTIONS
+       bool "Support funcname() { commands; } syntax"

        default n
        default n

-       select BUSYBOX_CONFIG_TRUE
-       select BUSYBOX_CONFIG_FALSE
-       select BUSYBOX_CONFIG_TEST
+       depends on BUSYBOX_CONFIG_HUSH

        help
        help

-         lash is the very smallest shell (adds just 10k) and it is quite
-         usable as a command prompt, but it is not suitable for any but the
-         most trivial scripting (such as an initrd that calls insmod a few
-         times) since it does not understand any Bourne shell grammar.  It
-         does handle pipes, redirects, and job control though.  Adding in
-         command editing makes it a very nice lightweight command prompt.
+         Enable support for shell functions in hush. +800 bytes.

 
 

+config BUSYBOX_CONFIG_LASH
+       bool "lash (deprecated: aliased to hush)"
+       default n
+       select BUSYBOX_CONFIG_HUSH
+       help
+         lash is deprecated and will be removed, please migrate to hush.

 
 config BUSYBOX_CONFIG_MSH
 
 config BUSYBOX_CONFIG_MSH

-       bool "msh"
+       bool "msh (deprecated: please use hush)"

        default n
        default n

-       select BUSYBOX_CONFIG_TRUE
-       select BUSYBOX_CONFIG_FALSE
-       select BUSYBOX_CONFIG_TEST

        help
        help

-         The minix shell (adds just 30k) is quite complete and handles things
-         like for/do/done, case/esac and all the things you expect a Bourne
-         shell to do.  It is not always pedantically correct about Bourne
-         shell grammar (try running the shell testscript "tests/sh.testcases"
-         on it and compare vs bash) but for most things it works quite well.
-         It also uses only vfork, so it can be used on uClinux systems.
+         msh is deprecated and will be removed, please migrate to hush.
+         If there is a feature msh has but hush does not, please let us know.
+
+#        The minix shell (adds just 30k) is quite complete and handles things
+#        like for/do/done, case/esac and all the things you expect a Bourne
+#        shell to do. It is not always pedantically correct about Bourne
+#        shell grammar (try running the shell testscript "tests/sh.testcases"
+#        on it and compare vs bash) but for most things it works quite well.
+#        It uses only vfork, so it can be used on uClinux systems.
+

 
 comment "Bourne Shell Options"
        depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
 
 
 comment "Bourne Shell Options"
        depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
 

+config BUSYBOX_CONFIG_SH_MATH_SUPPORT
+       bool "POSIX math support"
+       default y
+       depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH
+       help
+         Enable math support in the shell via $((...)) syntax.
+
+config BUSYBOX_CONFIG_SH_MATH_SUPPORT_64
+       bool "Extend POSIX math support to 64 bit"
+       default y
+       depends on BUSYBOX_CONFIG_SH_MATH_SUPPORT
+       help
+         Enable 64-bit math support in the shell. This will make the shell
+         slightly larger, but will allow computation with very large numbers.
+         This is not in POSIX, so do not rely on this in portable code.
+

 config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET
        bool "Hide message on interactive shell startup"
        default n
 config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET
        bool "Hide message on interactive shell startup"
        default n


@@ -270,11 +286,11 @@ config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
        depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
        help
          This option causes busybox shells to use busybox applets
        depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
        help
          This option causes busybox shells to use busybox applets

-         in preference to executables in the PATH whenever possible.  For
+         in preference to executables in the PATH whenever possible. For

          example, entering the command 'ifconfig' into the shell would cause
          example, entering the command 'ifconfig' into the shell would cause

-         busybox to use the ifconfig busybox applet.  Specifying the fully
+         busybox to use the ifconfig busybox applet. Specifying the fully

          qualified executable name, such as '/sbin/ifconfig' will still
          qualified executable name, such as '/sbin/ifconfig' will still

-         execute the /sbin/ifconfig executable on the filesystem.  This option
+         execute the /sbin/ifconfig executable on the filesystem. This option

          is generally used when creating a statically linked version of busybox
          for use as a rescue shell, in the event that you screw up your system.
 
          is generally used when creating a statically linked version of busybox
          for use as a rescue shell, in the event that you screw up your system.
 


@@ -288,15 +304,32 @@ config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
          started this way).
 # untrue?
 #        Note that this will *also* cause applets to take precedence
          started this way).
 # untrue?
 #        Note that this will *also* cause applets to take precedence

-#        over shell builtins of the same name.  So turning this on will
+#        over shell builtins of the same name. So turning this on will

 #        eliminate any performance gained by turning on the builtin "echo"
 #        and "test" commands in ash.
 # untrue?
 #        Note that when using this option, the shell will attempt to directly
 #        eliminate any performance gained by turning on the builtin "echo"
 #        and "test" commands in ash.
 # untrue?
 #        Note that when using this option, the shell will attempt to directly

-#        run '/bin/busybox'.  If you do not have the busybox binary sitting in
+#        run '/bin/busybox'. If you do not have the busybox binary sitting in

 #        that exact location with that exact name, this option will not work at
 #        all.
 
 #        that exact location with that exact name, this option will not work at
 #        all.
 

+config BUSYBOX_CONFIG_FEATURE_SH_NOFORK
+       bool "Run 'nofork' applets directly"
+       default n
+       depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
+       help
+         This option causes busybox shells [currently only ash]
+         to not execute typical fork/exec/wait sequence, but call <applet>_main
+         directly, if possible. (Sometimes it is not possible: for example,
+         this is not possible in pipes).
+
+         This will be done only for some applets (those which are marked
+         NOFORK in include/applets.h).
+
+         This may significantly speed up some shell scripts.
+
+         This feature is relatively new. Use with care.
+

 config BUSYBOX_CONFIG_CTTYHACK
        bool "cttyhack"
        default n
 config BUSYBOX_CONFIG_CTTYHACK
        bool "cttyhack"
        default n