generic: rtl8366: add rtl8366_smi_write_reg_noack helper

[openwrt.git] / package / busybox / config / libbb / Config.in

diff --git a/package/busybox/config/libbb/Config.in b/package/busybox/config/libbb/Config.in
index 4e23b8a..6475403 100644 (file)
--- a/package/busybox/config/libbb/Config.in
+++ b/package/busybox/config/libbb/Config.in
@@ -1,3 +1,4 @@
+# DO NOT EDIT. This file is generated from Config.src

 #
 # For a description of the syntax of this configuration file,
 # see scripts/kbuild/config-language.txt.
 #
 # For a description of the syntax of this configuration file,
 # see scripts/kbuild/config-language.txt.


@@ -5,6 +6,21 @@
 
 menu "Busybox Library Tuning"
 
 
 menu "Busybox Library Tuning"
 

+config BUSYBOX_CONFIG_FEATURE_SYSTEMD
+       bool "Enable systemd support"
+       default n
+       help
+         If you plan to use busybox daemons on a system where daemons
+         are controlled by systemd, enable this option.
+         If you don't use systemd, it is still safe to enable it,
+         but the downside is increased code size.
+config BUSYBOX_CONFIG_FEATURE_RTMINMAX
+       bool "Support RTMIN[+n] and RTMAX[-n] signal names"
+       default n
+       help
+         Support RTMIN[+n] and RTMAX[-n] signal names
+         in kill, killall etc. This costs ~250 bytes.
+

 config BUSYBOX_CONFIG_PASSWORD_MINLEN
        int "Minimum password length"
        default 6
 config BUSYBOX_CONFIG_PASSWORD_MINLEN
        int "Minimum password length"
        default 6


@@ -13,7 +29,7 @@ config BUSYBOX_CONFIG_PASSWORD_MINLEN
          Minimum allowable password length.
 
 config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
          Minimum allowable password length.
 
 config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED

-       int " MD5: Trade Bytes for Speed"
+       int "MD5: Trade bytes for speed (0:fast, 3:slow)"

        default 2
        range 0 3
        help
        default 2
        range 0 3
        help


@@ -41,6 +57,17 @@ config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
          a rarely used feature which allows you to use names
          instead of IP/mask pairs in route command.
 
          a rarely used feature which allows you to use names
          instead of IP/mask pairs in route command.
 

+config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
+       bool "Use termios to manipulate the screen"
+       default n
+       depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP
+       help
+         This option allows utilities such as 'more' and 'top' to determine
+         the size of the screen. If you leave this disabled, your utilities
+         that display things on the screen will be especially primitive and
+         will be unable to determine the current screen size, and will be
+         unable to move the cursor.
+

 config BUSYBOX_CONFIG_FEATURE_EDITING
        bool "Command line editing"
        default y
 config BUSYBOX_CONFIG_FEATURE_EDITING
        bool "Command line editing"
        default y


@@ -57,36 +84,37 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN
          You may want to decrease this parameter if your target machine
          benefits from smaller stack usage.
 
          You may want to decrease this parameter if your target machine
          benefits from smaller stack usage.
 

-config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_KEYS
-       bool "Additional editing keys"
-       default y
-       depends on BUSYBOX_CONFIG_FEATURE_EDITING
-       help
-         Enable additonal editing keys (Ctrl-E, Ctrl-U etc).
-         Arrow keys, Home/End/Delete and Ctrl-W work even without this option.
-

 config BUSYBOX_CONFIG_FEATURE_EDITING_VI
        bool "vi-style line editing commands"
        default n
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help
 config BUSYBOX_CONFIG_FEATURE_EDITING_VI
        bool "vi-style line editing commands"
        default n
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help

-         Enable vi-style line editing.  In shells, this mode can be
+         Enable vi-style line editing. In shells, this mode can be

          turned on and off with "set -o vi" and "set +o vi".
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
        int "History size"
          turned on and off with "set -o vi" and "set +o vi".
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
        int "History size"

-       range 0 99999
+       # Don't allow way too big values here, code uses fixed "char *history[N]" struct member
+       range 0 9999

        default 256
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help
        default 256
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help

-         Specify command history size.
+         Specify command history size (0 - disable).

 
 config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
        bool "History saving"
        default n
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
        bool "History saving"
        default n

-       depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_EDITING
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING

        help
        help

-         Enable history saving in ash shell.
+         Enable history saving in shells.
+
+config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
+       bool "Reverse history search"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
+       help
+         Enable readline-like Ctrl-R combination for reverse history search.
+         Increases code by about 0.5k.

 
 config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
        bool "Tab completion"
 
 config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
        bool "Tab completion"


@@ -110,9 +138,75 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT
          Setting this option allows for prompts to use things like \w and
          \$ and escape codes.
 
          Setting this option allows for prompts to use things like \w and
          \$ and escape codes.
 

+config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
+       bool "Query cursor position from terminal"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING
+       help
+         Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
+         current cursor position. This information is used to make line
+         editing more robust in some cases.
+         If you are not sure whether your terminals respond to this code
+         correctly, or want to save on code size (about 400 bytes),
+         then do not turn this option on.
+
+config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
+       bool "Non-POSIX, but safer, copying to special nodes"
+       default y
+       help
+         With this option, "cp file symlink" will delete symlink
+         and create a regular file. This does not conform to POSIX,
+         but prevents a symlink attack.
+         Similarly, "cp file device" will not send file's data
+         to the device. (To do that, use "cat file >device")
+
+config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
+       bool "Give more precise messages when copy fails (cp, mv etc)"
+       default n
+       help
+         Error messages with this feature enabled:
+           $ cp file /does_not_exist/file
+           cp: cannot create '/does_not_exist/file': Path does not exist
+           $ cp file /vmlinuz/file
+           cp: cannot stat '/vmlinuz/file': Path has non-directory component
+         If this feature is not enabled, they will be, respectively:
+           cp: cannot create '/does_not_exist/file': No such file or directory
+           cp: cannot stat '/vmlinuz/file': Not a directory
+         This will cost you ~60 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
+       int "Copy buffer size, in kilobytes"
+       range 1 1024
+       default 4
+       help
+         Size of buffer used by cp, mv, install, wget etc.
+         Buffers which are 4 kb or less will be allocated on stack.
+         Bigger buffers will be allocated with mmap, with fallback to 4 kb
+         stack buffer if mmap fails.
+
+config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
+       bool "Skip rootfs in mount table"
+       default n
+       help
+         Ignore rootfs entry in mount table.
+
+         In Linux, kernel has a special filesystem, rootfs, which is initially
+         mounted on /. It contains initramfs data, if kernel is configured
+         to have one. Usually, another file system is mounted over / early
+         in boot process, and therefore most tools which manipulate
+         mount table, such as df, will skip rootfs entry.
+
+         However, some systems do not mount anything on /.
+         If you need to configure busybox for one of these systems,
+         you may find useful to turn this option off to make df show
+         initramfs statistic.
+
+         Otherwise, choose Y.
+

 config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
        bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
        default n
 config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
        bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
        default n

+       select BUSYBOX_CONFIG_PLATFORM_LINUX

        help
          Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
          time intervals (time, ping, traceroute etc need this).
        help
          Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
          time intervals (time, ping, traceroute etc need this).


@@ -127,4 +221,12 @@ config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
          Use ioctl names rather than hex values in error messages
          (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
          saves about 1400 bytes.
          Use ioctl names rather than hex values in error messages
          (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
          saves about 1400 bytes.

+
+config BUSYBOX_CONFIG_FEATURE_HWIB
+       bool "Support infiniband HW"
+       default n
+       help
+         Support for printing infiniband addresses in
+         network applets.
+

 endmenu
 endmenu