[kernel] kmod-usb-core is buildin on etrax target
[openwrt.git] / target / linux / brcm47xx / patches-2.6.33 / 270-ehci-ssb.patch
index 27b3923..700d58b 100644 (file)
@@ -29,7 +29,7 @@
        depends on USB
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -1158,8 +1158,16 @@ MODULE_LICENSE ("GPL");
+@@ -1159,8 +1159,16 @@ MODULE_LICENSE ("GPL");
  #define       PLATFORM_DRIVER         ehci_atmel_driver
  #endif
  
@@ -50,7 +50,7 @@
  
 --- /dev/null
 +++ b/drivers/usb/host/ehci-ssb.c
-@@ -0,0 +1,201 @@
+@@ -0,0 +1,158 @@
 +/*
 + * Sonics Silicon Backplane
 + * Broadcom USB-core EHCI driver (SSB bus glue)
@@ -90,7 +90,6 @@
 +      return (struct ssb_ehci_device *)(hcd->hcd_priv);
 +}
 +
-+
 +static int ssb_ehci_reset(struct usb_hcd *hcd)
 +{
 +      struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 +      if (err)
 +              return err;
 +
-+      ehci_port_power(ehci, 0);
++      ehci_reset(ehci);
 +
 +      return err;
 +}
 +
-+static int ssb_ehci_start(struct usb_hcd *hcd)
-+{
-+      struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+      int err;
-+
-+      err = ehci_run(hcd);
-+      if (err < 0) {
-+              ehci_err(ehci, "can't start\n");
-+              ehci_stop(hcd);
-+      }
-+
-+      return err;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ssb_ehci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
-+{
-+      struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
-+      struct ehci_hcd *ehci = &ehcidev->ehci;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&ehci->lock, flags);
-+
-+      ehci_writel(ehci, EHCI_INTR_MIE, &ehci->regs->intrdisable);
-+      ehci_readl(ehci, &ehci->regs->intrdisable); /* commit write */
-+
-+      /* make sure snapshot being resumed re-enumerates everything */
-+      if (message.event == PM_EVENT_PRETHAW)
-+              ehci_usb_reset(ehci);
-+
-+      clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+
-+      spin_unlock_irqrestore(&ehci->lock, flags);
-+      return 0;
-+}
-+
-+static int ssb_ehci_hcd_resume(struct usb_hcd *hcd)
-+{
-+      set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+      usb_hcd_resume_root_hub(hcd);
-+      return 0;
-+}
-+#endif /* CONFIG_PM */
-+
 +static const struct hc_driver ssb_ehci_hc_driver = {
 +      .description            = "ssb-usb-ehci",
 +      .product_desc           = "SSB EHCI Controller",
 +      .flags                  = HCD_MEMORY | HCD_USB2,
 +
 +      .reset                  = ssb_ehci_reset,
-+      .start                  = ssb_ehci_start,
++      .start                  = ehci_run,
 +      .stop                   = ehci_stop,
 +      .shutdown               = ehci_shutdown,
 +
-+#ifdef CONFIG_PM
-+      .suspend                = ssb_ehci_hcd_suspend,
-+      .resume                 = ssb_ehci_hcd_resume,
-+#endif
-+
 +      .urb_enqueue            = ehci_urb_enqueue,
 +      .urb_dequeue            = ehci_urb_dequeue,
 +      .endpoint_disable       = ehci_endpoint_disable,
++      .endpoint_reset         = ehci_endpoint_reset,
 +
 +      .get_frame_number       = ehci_get_frame,
 +
 +      .hub_status_data        = ehci_hub_status_data,
 +      .hub_control            = ehci_hub_control,
-+#ifdef CONFIG_PM
 +      .bus_suspend            = ehci_bus_suspend,
 +      .bus_resume             = ehci_bus_resume,
-+#endif
++      .relinquish_port        = ehci_relinquish_port,
++      .port_handed_over       = ehci_port_handed_over,
 +
++      .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 +};
 +
 +static void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd)
 +{
++      if (hcd->driver->shutdown)
++              hcd->driver->shutdown(hcd);
 +
 +      usb_remove_hcd(hcd);
++
 +      iounmap(hcd->regs);
++      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++
 +      usb_put_hcd(hcd);
 +}
 +EXPORT_SYMBOL_GPL(ssb_ehci_detach);
This page took 0.023373 seconds and 4 git commands to generate.