-diff -urN linux.old/arch/mips/bcm963xx/bcm63xx_led.c linux.dev/arch/mips/bcm963xx/bcm63xx_led.c
---- linux.old/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/bcm63xx_led.c 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/Kconfig linux-2.6.19.new/arch/mips/Kconfig
+--- linux-2.6.19/arch/mips/Kconfig 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/mips/Kconfig 2006-12-16 18:46:31.000000000 +0100
+@@ -12,6 +12,15 @@
+ prompt "System type"
+ default SGI_IP22
+
++config BCM963XX
++ bool "Support for the Broadcom boards"
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_HAS_CPU_MIPS32_R1
++ select IRQ_CPU
++ help
++ This is a fmaily of boards based on the Broadcom MIPS32
++
+ config MIPS_MTX1
+ bool "4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+@@ -766,6 +775,7 @@
+
+ endchoice
+
++source "arch/mips/bcm963xx/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+diff -urN linux-2.6.19/arch/mips/Makefile linux-2.6.19.new/arch/mips/Makefile
+--- linux-2.6.19/arch/mips/Makefile 2006-12-16 17:36:29.000000000 +0100
++++ linux-2.6.19.new/arch/mips/Makefile 2006-12-16 18:46:31.000000000 +0100
+@@ -158,6 +158,15 @@
+ #
+
+ #
++# Broadcom board
++#
++core-$(CONFIG_BCM963XX) += arch/mips/bcm963xx/
++cflags-$(CONFIG_BCM963XX) += -Iinclude/asm-mips/mach-bcm963xx
++cflags-$(CONFIG_BCM963XX) += -Iarch/mips/bcm963xx/include
++load-$(CONFIG_BCM963XX) += 0xffffffff80010000
++
++
++#
+ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+ #
+ core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
+diff -urN linux-2.6.19/arch/mips/bcm963xx/Kconfig linux-2.6.19.new/arch/mips/bcm963xx/Kconfig
+--- linux-2.6.19/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/Kconfig 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,138 @@
++# Kernel and Driver configuration for Broadcom Commengine ADSL board
++choice
++ prompt "Broadcom Commengine ADSL board"
++ depends on BCM963XX
++ default BCM96348
++ help
++ Select different Broadcom ADSL board
++
++config BCM96338
++ bool "96338 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++config BCM96345
++ bool "96345 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++config BCM96348
++ bool "96348 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++endchoice
++
++config BCM_BOARD
++ bool "Support for Broadcom Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL
++ bool "Support for Serial Port"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET
++ tristate "Support for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB
++ tristate "Support for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN
++ tristate "Support for Wireless"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PCI
++ bool "Support for PCI"
++ depends on BCM96338 || BCM96345 || BCM96348
++ select PCI
++
++config BCM_ATMAPI
++ tristate "Support for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST
++ tristate "Support for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL
++ tristate "Support for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT
++ tristate "Support for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS
++ tristate "Support for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL
++ tristate "Support for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY
++ tristate "Support for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA
++ tristate "Support for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BOARD_IMPL
++ int "Implementation index for ADSL Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL_IMPL
++ int "Implementation index for Serial"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET_IMPL
++ int "Implementation index for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB_IMPL
++ int "Implementation index for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN_IMPL
++ int "Implementation index for WIRELESS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMAPI_IMPL
++ int "Implementation index for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST_IMPL
++ int "Implementation index for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BLAA_IMPL
++ int "Implementation index for BLAA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL_IMPL
++ int "Implementation index for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT_IMPL
++ int "Implementation index for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS_IMPL
++ int "Implementation index for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL_IMPL
++ int "Implementation index for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY_IMPL
++ int "Implementation index for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA_IMPL
++ int "Implementation index for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
+diff -urN linux-2.6.19/arch/mips/bcm963xx/Makefile linux-2.6.19.new/arch/mips/bcm963xx/Makefile
+--- linux-2.6.19/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/Makefile 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,23 @@
++#
++# Makefile for generic Broadcom MIPS boards
++#
++# Copyright (C) 2004 Broadcom Corporation
++#
++obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o
++
++SRCBASE := $(TOPDIR)
++EXTRA_CFLAGS += -I$(SRCBASE)/include
++#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
++EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
++
++
++ifeq "$(ADSL)" "ANNEX_B"
++EXTRA_CFLAGS += -DADSL_ANNEXB
++endif
++ifeq "$(ADSL)" "SADSL"
++EXTRA_CFLAGS += -DADSL_SADSL
++endif
++ifeq "$(ADSL)" "ANNEX_C"
++EXTRA_CFLAGS += -DADSL_ANNEXC
++endif
++
+diff -urN linux-2.6.19/arch/mips/bcm963xx/bcm63xx_led.c linux-2.6.19.new/arch/mips/bcm963xx/bcm63xx_led.c
+--- linux-2.6.19/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/bcm63xx_led.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,582 @@
+/*
+<:copyright-gpl
+ }
+}
+
-diff -urN linux.old/arch/mips/bcm963xx/board.c linux.dev/arch/mips/bcm963xx/board.c
---- linux.old/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/board.c 2006-08-25 15:16:26.000000000 +0200
-@@ -0,0 +1,555 @@
+diff -urN linux-2.6.19/arch/mips/bcm963xx/board.c linux-2.6.19.new/arch/mips/bcm963xx/board.c
+--- linux-2.6.19/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/board.c 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,559 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+/* DyingGasp function prototype */
+static void __init kerSysDyingGaspMapIntr(void);
-+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs);
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id);
+static void __init kerSysInitDyingGaspHandler( void );
+static void __exit kerSysDeinitDyingGaspHandler( void );
+/* -DyingGasp function prototype - */
+ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas
+ * * à relire plusieurs fois */
+ /* inv_xde */
++#if 0
+ if (boot_loader_type == BOOT_CFE)
+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
+ NVRAM_MAC_ADDRESS_LEN );
+ else {
++#endif
+ pucaMacAddr[0] = 0x00;
+ pucaMacAddr[1] = 0x07;
+ pucaMacAddr[2] = 0x3A;
+ pucaMacAddr[3] = 0xFF;
+ pucaMacAddr[4] = 0xFF;
+ pucaMacAddr[5] = 0xFF;
++#if 0
+ }
++#endif
+
+ return nRet;
+} /* kerSysGetMacAddr */
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs)
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id)
+#else
+static unsigned int kerSysDyingGaspIsr(void)
+#endif
+EXPORT_SYMBOL(kerSysSetWdTimer);
+EXPORT_SYMBOL(kerSysWakeupMonitorTask);
+
-diff -urN linux.old/arch/mips/bcm963xx/boardparms.c linux.dev/arch/mips/bcm963xx/boardparms.c
---- linux.old/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/boardparms.c linux-2.6.19.new/arch/mips/bcm963xx/boardparms.c
+--- linux-2.6.19/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/boardparms.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,2391 @@
+/*
+<:copyright-gpl
+ return( nRet );
+} /* BpGetVoipChipSelect */
+
-diff -urN linux.old/arch/mips/bcm963xx/boardparms.h linux.dev/arch/mips/bcm963xx/boardparms.h
---- linux.old/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/boardparms.h linux-2.6.19.new/arch/mips/bcm963xx/boardparms.h
+--- linux-2.6.19/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/boardparms.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,758 @@
+/*
+<:copyright-gpl
+
+#endif /* _BOARDPARMS_H */
+
-diff -urN linux.old/arch/mips/bcm963xx/include/6338_intr.h linux.dev/arch/mips/bcm963xx/include/6338_intr.h
---- linux.old/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/6338_intr.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6338_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6338_intr.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/6338_intr.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,64 @@
+/*
+<:copyright-gpl
+
+#endif /* __BCM6338_H */
+
-diff -urN linux.old/arch/mips/bcm963xx/include/6338_map_part.h linux.dev/arch/mips/bcm963xx/include/6338_map_part.h
---- linux.old/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/6338_map_part.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6338_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6338_map_part.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/6338_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,334 @@
+/*
+<:copyright-gpl
+
+#endif
+
-diff -urN linux.old/arch/mips/bcm963xx/include/6345_intr.h linux.dev/arch/mips/bcm963xx/include/6345_intr.h
---- linux.old/arch/mips/bcm963xx/include/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/6345_intr.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6345_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6345_intr.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/6345_intr.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,72 @@
+/*
+<:copyright-gpl
+
+#endif /* __BCM6345_H */
+
-diff -urN linux.old/arch/mips/bcm963xx/include/6345_map_part.h linux.dev/arch/mips/bcm963xx/include/6345_map_part.h
---- linux.old/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/6345_map_part.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6345_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6345_map_part.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/6345_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,163 @@
+/*
+<:copyright-gpl
+
+#endif
+
-diff -urN linux.old/arch/mips/bcm963xx/include/6348_intr.h linux.dev/arch/mips/bcm963xx/include/6348_intr.h
---- linux.old/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/6348_intr.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6348_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6348_intr.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/6348_intr.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,74 @@
+/*
+<:copyright-gpl
+
+#endif /* __BCM6348_H */
+
-diff -urN linux.old/arch/mips/bcm963xx/include/6348_map_part.h linux.dev/arch/mips/bcm963xx/include/6348_map_part.h
---- linux.old/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/6348_map_part.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6348_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6348_map_part.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/6348_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,500 @@
+/*
+<:copyright-gpl
+
+#endif
+
-diff -urN linux.old/arch/mips/bcm963xx/include/bcm_intr.h linux.dev/arch/mips/bcm963xx/include/bcm_intr.h
---- linux.old/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/bcm_intr.h 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,59 @@
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmTag.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmTag.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmTag.h 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,153 @@
+/*
+<:copyright-gpl
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
++//**************************************************************************************
++// File Name : bcmTag.h
++//
++// Description: add tag with validation system to the firmware image file to be uploaded
++// via http
++//
++// Created : 02/28/2002 seanl
++//**************************************************************************************
+
-+#ifndef __BCM_INTR_H
-+#define __BCM_INTR_H
++#ifndef _BCMTAG_H_
++#define _BCMTAG_H_
+
-+#ifdef __cplusplus
-+ extern "C" {
-+#endif
+
-+#if defined(CONFIG_BCM96338)
-+#include <6338_intr.h>
-+#endif
-+#if defined(CONFIG_BCM96345)
-+#include <6345_intr.h>
-+#endif
-+#if defined(CONFIG_BCM96348)
-+#include <6348_intr.h>
-+#endif
++#define BCM_SIG_1 "Broadcom Corporation"
++#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
+
-+/* defines */
-+struct pt_regs;
-+typedef int (*FN_HANDLER) (int, void *, struct pt_regs *);
++#define BCM_TAG_VER "6"
++#define BCM_TAG_VER_LAST "26"
+
-+/* prototypes */
-+extern void enable_brcm_irq(unsigned int irq);
-+extern void disable_brcm_irq(unsigned int irq);
-+extern int request_external_irq(unsigned int irq,
-+ FN_HANDLER handler, unsigned long irqflags,
-+ const char * devname, void *dev_id);
-+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
-+ unsigned int interruptId);
-+extern void dump_intr_regs(void);
++// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
++#define TAG_LEN 256
++#define TAG_VER_LEN 4
++#define SIG_LEN 20
++#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
++#define CHIP_ID_LEN 6
++#define IMAGE_LEN 10
++#define ADDRESS_LEN 12
++#define FLAG_LEN 2
++#define TOKEN_LEN 20
++#define BOARD_ID_LEN 16
++#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
++ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
+
-+/* compatibility definitions */
-+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
++
++// TAG for downloadable image (kernel plus file system)
++typedef struct _FILE_TAG
++{
++ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
++ unsigned char signiture_1[SIG_LEN]; // text line for company info
++ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
++ unsigned char chipId[CHIP_ID_LEN]; // chip id
++ unsigned char boardId[BOARD_ID_LEN]; // board id
++ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
++ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
++ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
++ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
++ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
++ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
++ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
++ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
++ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
++ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
++ unsigned char reserved[RESERVED_LEN]; // reserved for later use
++ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
++ // now will be 4 unsigned char crc
++ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
++} FILE_TAG, *PFILE_TAG;
++
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC_LEN 4
++
++// only included if for bcmTag.exe program
++#ifdef BCMTAG_EXE_USE
++
++static unsigned long Crc32_table[256] = {
++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
++};
++#endif // BCMTAG_USE
++
++
++#endif // _BCMTAG_H_
++
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcm_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_intr.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_intr.h 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,59 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM_INTR_H
++#define __BCM_INTR_H
++
++#ifdef __cplusplus
++ extern "C" {
++#endif
++
++#if defined(CONFIG_BCM96338)
++#include <6338_intr.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_intr.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_intr.h>
++#endif
++
++/* defines */
++struct pt_regs;
++typedef int (*FN_HANDLER) (int, void *);
++
++/* prototypes */
++extern void enable_brcm_irq(unsigned int irq);
++extern void disable_brcm_irq(unsigned int irq);
++extern int request_external_irq(unsigned int irq,
++ FN_HANDLER handler, unsigned long irqflags,
++ const char * devname, void *dev_id);
++extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
++ unsigned int interruptId);
++extern void dump_intr_regs(void);
++
++/* compatibility definitions */
++#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
+
+#ifdef __cplusplus
+#endif
+
+#endif
-diff -urN linux.old/arch/mips/bcm963xx/include/bcm_map_part.h linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h
---- linux.old/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcm_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_map_part.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,34 @@
+/*
+<:copyright-gpl
+
+#endif
+
-diff -urN linux.old/arch/mips/bcm963xx/include/bcmpci.h linux.dev/arch/mips/bcm963xx/include/bcmpci.h
---- linux.old/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/bcmpci.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmpci.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmpci.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmpci.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,87 @@
+/*
+<:copyright-gpl
+#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
+
+#endif
-diff -urN linux.old/arch/mips/bcm963xx/include/bcmTag.h linux.dev/arch/mips/bcm963xx/include/bcmTag.h
---- linux.old/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/bcmTag.h 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,153 @@
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmtypes.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmtypes.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmtypes.h 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,160 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
-+//**************************************************************************************
-+// File Name : bcmTag.h
++
+//
-+// Description: add tag with validation system to the firmware image file to be uploaded
-+// via http
++// bcmtypes.h - misc useful typedefs
+//
-+// Created : 02/28/2002 seanl
-+//**************************************************************************************
++#ifndef BCMTYPES_H
++#define BCMTYPES_H
+
-+#ifndef _BCMTAG_H_
-+#define _BCMTAG_H_
++// These are also defined in typedefs.h in the application area, so I need to
++// protect against re-definition.
+
++#ifndef _TYPEDEFS_H_
++typedef unsigned char uint8;
++typedef unsigned short uint16;
++typedef unsigned long uint32;
++typedef signed char int8;
++typedef signed short int16;
++typedef signed long int32;
++#endif
+
-+#define BCM_SIG_1 "Broadcom Corporation"
-+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
++typedef unsigned char byte;
++// typedef unsigned long sem_t;
+
-+#define BCM_TAG_VER "6"
-+#define BCM_TAG_VER_LAST "26"
++typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
++typedef signed long LONG,*PLONG;
+
-+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
-+#define TAG_LEN 256
-+#define TAG_VER_LEN 4
-+#define SIG_LEN 20
-+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
-+#define CHIP_ID_LEN 6
-+#define IMAGE_LEN 10
-+#define ADDRESS_LEN 12
-+#define FLAG_LEN 2
-+#define TOKEN_LEN 20
-+#define BOARD_ID_LEN 16
-+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
-+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
++typedef unsigned int *PUINT;
++typedef signed int INT;
+
++typedef unsigned short *PUSHORT;
++typedef signed short SHORT,*PSHORT;
++typedef unsigned short WORD,*PWORD;
+
-+// TAG for downloadable image (kernel plus file system)
-+typedef struct _FILE_TAG
-+{
-+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
-+ unsigned char signiture_1[SIG_LEN]; // text line for company info
-+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
-+ unsigned char chipId[CHIP_ID_LEN]; // chip id
-+ unsigned char boardId[BOARD_ID_LEN]; // board id
-+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
-+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
-+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
-+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
-+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
-+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
-+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
-+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
-+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
-+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
-+ unsigned char reserved[RESERVED_LEN]; // reserved for later use
-+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
-+ // now will be 4 unsigned char crc
-+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
-+} FILE_TAG, *PFILE_TAG;
++typedef unsigned char *PUCHAR;
++typedef signed char *PCHAR;
+
-+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-+#define CRC_LEN 4
++typedef void *PVOID;
+
-+// only included if for bcmTag.exe program
-+#ifdef BCMTAG_EXE_USE
-+
-+static unsigned long Crc32_table[256] = {
-+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-+};
-+#endif // BCMTAG_USE
-+
-+
-+#endif // _BCMTAG_H_
-+
-diff -urN linux.old/arch/mips/bcm963xx/include/bcmtypes.h linux.dev/arch/mips/bcm963xx/include/bcmtypes.h
---- linux.old/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/bcmtypes.h 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,163 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+//
-+// bcmtypes.h - misc useful typedefs
-+//
-+#ifndef BCMTYPES_H
-+#define BCMTYPES_H
-+
-+// These are also defined in typedefs.h in the application area, so I need to
-+// protect against re-definition.
-+
-+#ifndef _TYPEDEFS_H_
-+typedef unsigned char uint8;
-+typedef unsigned short uint16;
-+typedef unsigned long uint32;
-+typedef signed char int8;
-+typedef signed short int16;
-+typedef signed long int32;
-+#if !defined(__cplusplus)
-+typedef int bool;
-+#endif
-+#endif
-+
-+typedef unsigned char byte;
-+// typedef unsigned long sem_t;
-+
-+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
-+typedef signed long LONG,*PLONG;
-+
-+typedef unsigned int *PUINT;
-+typedef signed int INT;
-+
-+typedef unsigned short *PUSHORT;
-+typedef signed short SHORT,*PSHORT;
-+typedef unsigned short WORD,*PWORD;
-+
-+typedef unsigned char *PUCHAR;
-+typedef signed char *PCHAR;
-+
-+typedef void *PVOID;
-+
-+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
++typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
+
+typedef unsigned char BYTE,*PBYTE;
+
+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
+
+#endif
-diff -urN linux.old/arch/mips/bcm963xx/include/board.h linux.dev/arch/mips/bcm963xx/include/board.h
---- linux.old/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/include/board.h 2006-08-25 01:52:34.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/include/board.h linux-2.6.19.new/arch/mips/bcm963xx/include/board.h
+--- linux-2.6.19/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/include/board.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,373 @@
+/*
+<:copyright-gpl
+
+#endif /* _BOARD_H */
+
-diff -urN linux.old/arch/mips/bcm963xx/int-handler.S linux.dev/arch/mips/bcm963xx/int-handler.S
---- linux.old/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/int-handler.S 2006-08-25 02:13:33.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/int-handler.S linux-2.6.19.new/arch/mips/bcm963xx/int-handler.S
+--- linux-2.6.19/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/int-handler.S 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,59 @@
+/*
+<:copyright-gpl
+ * Generic interrupt handler for Broadcom MIPS boards
+ */
+
-+#include <linux/config.h>
++#include <linux/autoconf.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+ nop
+
+ END(brcmIRQ)
-diff -urN linux.old/arch/mips/bcm963xx/irq.c linux.dev/arch/mips/bcm963xx/irq.c
---- linux.old/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/irq.c 2006-08-25 03:54:34.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/irq.c linux-2.6.19.new/arch/mips/bcm963xx/irq.c
+--- linux-2.6.19/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/irq.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,256 @@
+/*
+<:copyright-gpl
+ }
+ if (pendingIrqs & irqBit) {
+ PERF->IrqMask &= ~irqBit; // mask
-+ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs);
++ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET);
+ break;
+ }
+ }
+}
+
-+static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs)
++static void irq_dispatch_ext(uint32 irq)
+{
+ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) {
+ printk("**** Ext IRQ mask. Should not dispatch ****\n");
+ /* disable and clear interrupt in the controller */
+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
-+ do_IRQ(irq, regs);
++ do_IRQ(irq);
+}
+
+
+ else if (cause & CAUSEF_IP2)
+ irq_dispatch_int(regs);
+ else if (cause & CAUSEF_IP3)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs);
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0);
+ else if (cause & CAUSEF_IP4)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs);
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1);
+ else if (cause & CAUSEF_IP5)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs);
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2);
+ else if (cause & CAUSEF_IP6)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs);
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3);
+ local_irq_disable();
+ }
+}
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
-+ irq_desc[i].handler = &brcm_irq_type;
++ irq_desc[i].chip = &brcm_irq_type;
+ }
+}
+
+ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior
+ * is consistent with interrupt handling on VxWorks.
+ */
-+ irq_desc[interruptId].handler = &brcm_irq_no_end_type;
++ irq_desc[interruptId].chip = &brcm_irq_no_end_type;
+
+ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET )
+ {
+EXPORT_SYMBOL(request_external_irq);
+EXPORT_SYMBOL(BcmHalMapInterrupt);
+
-diff -urN linux.old/arch/mips/bcm963xx/Kconfig linux.dev/arch/mips/bcm963xx/Kconfig
---- linux.old/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/Kconfig 2006-08-25 01:22:39.000000000 +0200
-@@ -0,0 +1,138 @@
-+# Kernel and Driver configuration for Broadcom Commengine ADSL board
-+choice
-+ prompt "Broadcom Commengine ADSL board"
-+ depends on MIPS_BRCM
-+ default BCM96345
-+ help
-+ Select different Broadcom ADSL board
+diff -urN linux-2.6.19/arch/mips/bcm963xx/prom.c linux-2.6.19.new/arch/mips/bcm963xx/prom.c
+--- linux-2.6.19/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/prom.c 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,143 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
-+config BCM96338
-+ bool "96338 ADSL board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
+
-+config BCM96345
-+ bool "96345 ADSL board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
+
-+config BCM96348
-+ bool "96348 ADSL board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * prom.c: PROM library initialization code.
++ *
++ */
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/sched.h>
++#include <linux/bootmem.h>
++#include <linux/blkdev.h>
++#include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/cpu.h>
++#include <asm/time.h>
+
-+endchoice
++#include <bcm_map_part.h>
++#include <board.h>
++#include "boardparms.h"
++#include "softdsl/AdslCoreDefs.h"
+
-+config BCM_BOARD
-+ bool "Support for Broadcom Board"
-+ depends on BCM96338 || BCM96345 || BCM96348
+
-+config BCM_SERIAL
-+ bool "Support for Serial Port"
-+ depends on BCM96338 || BCM96345 || BCM96348
++//char arcs_cmdline[CL_SIZE] __initdata = {0};
++/* inv_xde */
++int boot_loader_type;
++int prom_argc;
++char **prom_argv, **prom_envp;
+
-+config BCM_ENET
-+ tristate "Support for Ethernet"
-+ depends on BCM96338 || BCM96345 || BCM96348
++extern int do_syslog(int, char *, int);
++extern void serial_init(void);
++extern void __init InitNvramInfo( void );
++extern void kerSysFlashInit( void );
++extern unsigned long get_nvram_start_addr(void);
++void __init create_root_nfs_cmdline( char *cmdline );
+
-+config BCM_USB
-+ tristate "Support for USB"
-+ depends on BCM96338 || BCM96345 || BCM96348
++#define MACH_BCM MACH_BCM96348
+
-+config BCM_WLAN
-+ tristate "Support for Wireless"
-+ depends on BCM96338 || BCM96345 || BCM96348
++const char *get_system_type(void)
++{
++ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
+
-+config BCM_PCI
-+ bool "Support for PCI"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+ select PCI
++ return( pNvramData->szBoardId );*/
++ return "brcm63xx";
++}
+
-+config BCM_ATMAPI
-+ tristate "Support for ATM"
-+ depends on BCM96338 || BCM96345 || BCM96348
++unsigned long getMemorySize(void)
++{
++ unsigned long ulSdramType = BOARD_SDRAM_TYPE;
+
-+config BCM_ATMTEST
-+ tristate "Support for ATM Diagnostic"
-+ depends on BCM96338 || BCM96345 || BCM96348
++ unsigned long ulSdramSize;
+
-+config BCM_ADSL
-+ tristate "Support for ADSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
++ switch( ulSdramType )
++ {
++ case BP_MEMORY_16MB_1_CHIP:
++ case BP_MEMORY_16MB_2_CHIP:
++ ulSdramSize = 16 * 1024 * 1024;
++ break;
++ case BP_MEMORY_32MB_1_CHIP:
++ case BP_MEMORY_32MB_2_CHIP:
++ ulSdramSize = 32 * 1024 * 1024;
++ break;
++ case BP_MEMORY_64MB_2_CHIP:
++ ulSdramSize = 64 * 1024 * 1024;
++ break;
++ default:
++ ulSdramSize = 8 * 1024 * 1024;
++ break;
++ }
++ if (boot_loader_type == BOOT_CFE)
++ return ulSdramSize;
++ else
++ // assume that there is one contiguous memory map
++ return boot_mem_map.map[0].size;
++}
+
-+config BCM_ENDPOINT
-+ tristate "Support for VOICE"
-+ depends on BCM96338 || BCM96345 || BCM96348
++/* --------------------------------------------------------------------------
++ Name: prom_init
++ -------------------------------------------------------------------------- */
++void __init prom_init(void)
++{
++ extern ulong r4k_interval;
+
-+config BCM_PROCFS
-+ tristate "Support for PROCFS"
-+ depends on BCM96338 || BCM96345 || BCM96348
++ serial_init();
+
-+config BCM_VDSL
-+ tristate "Support for VDSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
++ prom_argc = fw_arg0;
++ prom_argv = (char **) fw_arg1;
++ prom_envp = (char **) fw_arg2;
+
-+config BCM_SECURITY
-+ tristate "Support for SECURITY"
-+ depends on BCM96338 || BCM96345 || BCM96348
++ if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) {
++ strncpy(arcs_cmdline, prom_argv[1], CL_SIZE);
++ }
+
-+config BCM_HPNA
-+ tristate "Support for HPNA"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_BOARD_IMPL
-+ int "Implementation index for ADSL Board"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_SERIAL_IMPL
-+ int "Implementation index for Serial"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ENET_IMPL
-+ int "Implementation index for Ethernet"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_USB_IMPL
-+ int "Implementation index for USB"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_WLAN_IMPL
-+ int "Implementation index for WIRELESS"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ATMAPI_IMPL
-+ int "Implementation index for ATM"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ATMTEST_IMPL
-+ int "Implementation index for ATM Diagnostic"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_BLAA_IMPL
-+ int "Implementation index for BLAA"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ADSL_IMPL
-+ int "Implementation index for ADSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ENDPOINT_IMPL
-+ int "Implementation index for VOICE"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_PROCFS_IMPL
-+ int "Implementation index for PROCFS"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_VDSL_IMPL
-+ int "Implementation index for VDSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_SECURITY_IMPL
-+ int "Implementation index for SECURITY"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_HPNA_IMPL
-+ int "Implementation index for HPNA"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-diff -urN linux.old/arch/mips/bcm963xx/Makefile linux.dev/arch/mips/bcm963xx/Makefile
---- linux.old/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/Makefile 2006-08-25 02:04:27.000000000 +0200
-@@ -0,0 +1,23 @@
-+#
-+# Makefile for generic Broadcom MIPS boards
-+#
-+# Copyright (C) 2004 Broadcom Corporation
-+#
-+obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o
-+
-+SRCBASE := $(TOPDIR)
-+EXTRA_CFLAGS += -I$(SRCBASE)/include
-+#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
-+EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
-+
-+
-+ifeq "$(ADSL)" "ANNEX_B"
-+EXTRA_CFLAGS += -DADSL_ANNEXB
-+endif
-+ifeq "$(ADSL)" "SADSL"
-+EXTRA_CFLAGS += -DADSL_SADSL
-+endif
-+ifeq "$(ADSL)" "ANNEX_C"
-+EXTRA_CFLAGS += -DADSL_ANNEXC
-+endif
-+
-diff -urN linux.old/arch/mips/bcm963xx/prom.c linux.dev/arch/mips/bcm963xx/prom.c
---- linux.old/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/prom.c 2006-08-25 01:49:57.000000000 +0200
-@@ -0,0 +1,128 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2004 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ * prom.c: PROM library initialization code.
-+ *
-+ */
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+#include <linux/blkdev.h>
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/cpu.h>
-+#include <asm/time.h>
-+
-+#include <bcm_map_part.h>
-+#include <board.h>
-+#include "boardparms.h"
-+#include "softdsl/AdslCoreDefs.h"
-+
-+
-+//char arcs_cmdline[CL_SIZE] __initdata = {0};
-+/* inv_xde */
-+int boot_loader_type;
-+
-+extern int do_syslog(int, char *, int);
-+extern void serial_init(void);
-+extern void __init InitNvramInfo( void );
-+extern void kerSysFlashInit( void );
-+extern unsigned long get_nvram_start_addr(void);
-+void __init create_root_nfs_cmdline( char *cmdline );
-+
-+#define MACH_BCM MACH_BCM96348
-+
-+const char *get_system_type(void)
-+{
-+ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-+
-+ return( pNvramData->szBoardId );*/
-+ return "brcm63xx";
-+}
-+
-+unsigned long getMemorySize(void)
-+{
-+ unsigned long ulSdramType = BOARD_SDRAM_TYPE;
-+
-+ unsigned long ulSdramSize;
-+
-+ switch( ulSdramType )
-+ {
-+ case BP_MEMORY_16MB_1_CHIP:
-+ case BP_MEMORY_16MB_2_CHIP:
-+ ulSdramSize = 16 * 1024 * 1024;
-+ break;
-+ case BP_MEMORY_32MB_1_CHIP:
-+ case BP_MEMORY_32MB_2_CHIP:
-+ ulSdramSize = 32 * 1024 * 1024;
-+ break;
-+ case BP_MEMORY_64MB_2_CHIP:
-+ ulSdramSize = 64 * 1024 * 1024;
-+ break;
-+ default:
-+ ulSdramSize = 8 * 1024 * 1024;
-+ break;
-+ }
-+ if (boot_loader_type == BOOT_CFE)
-+ return ulSdramSize;
-+ else
-+ // assume that there is one contiguous memory map
-+ return boot_mem_map.map[0].size;
-+}
-+
-+/* --------------------------------------------------------------------------
-+ Name: prom_init
-+ -------------------------------------------------------------------------- */
-+void __init prom_init(void)
-+{
-+ extern ulong r4k_interval;
-+
-+ serial_init();
-+
-+ /* Need to fixup boot loader detection code
-+ * whithout changing prom_init prototype
-+ */
++ if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) {
++ boot_loader_type = BOOT_CFE;
++ }
++ else {
++ boot_loader_type = BOOT_REDBOOT;
++ }
+
+ do_syslog(8, NULL, 8);
+
+
+ arcs_cmdline[0] = '\0';
+
-+ if (boot_loader_type == BOOT_CFE)
++ if (boot_loader_type == BOOT_CFE)
+ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+ else
-+ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
++ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+
+ mips_machgroup = MACH_GROUP_BRCM;
+ mips_machtype = MACH_BCM;
++
++ BpSetBoardId("96348GW-10");
+}
+
+/* --------------------------------------------------------------------------
+ Name: prom_free_prom_memory
-+Abstract:
++Abstract:
+ -------------------------------------------------------------------------- */
+void __init prom_free_prom_memory(void)
+{
+
+}
+
-diff -urN linux.old/arch/mips/bcm963xx/ser_init.c linux.dev/arch/mips/bcm963xx/ser_init.c
---- linux.old/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/ser_init.c 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/ser_init.c linux-2.6.19.new/arch/mips/bcm963xx/ser_init.c
+--- linux-2.6.19/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/ser_init.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,180 @@
+/*
+<:copyright-gpl
+ *
+ */
+
-+#include <linux/config.h>
++#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+ prom_puts(ptr);
+}
+#endif
-diff -urN linux.old/arch/mips/bcm963xx/setup.c linux.dev/arch/mips/bcm963xx/setup.c
---- linux.old/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/setup.c 2006-08-25 02:26:58.000000000 +0200
-@@ -0,0 +1,525 @@
+diff -urN linux-2.6.19/arch/mips/bcm963xx/setup.c linux-2.6.19.new/arch/mips/bcm963xx/setup.c
+--- linux-2.6.19/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/setup.c 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,523 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+ * Generic setup routines for Broadcom 963xx MIPS boards
+ */
+
-+#include <linux/config.h>
++#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <asm/gdb-stub.h>
+
+extern void brcm_time_init(void);
-+extern void brcm_timer_setup(struct irqaction *irq);
+extern unsigned long getMemorySize(void);
+
+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
+ pm_power_off = brcm_machine_halt;
+
+ board_time_init = brcm_time_init;
-+ board_timer_setup = brcm_timer_setup;
+
+ panic_timeout = 5;
+
+ return 0;
+}
+
-+void plat_setup(void)
++void __init plat_mem_setup(void)
+{
+ brcm63xx_setup();
+}
+EXPORT_SYMBOL(_ZdlPv);
+EXPORT_SYMBOL(_ZdaPv);
+
-diff -urN linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
---- linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux-2.6.19.new/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
+--- linux-2.6.19/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,2 @@
+#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
+
-diff -urN linux.old/arch/mips/bcm963xx/time.c linux.dev/arch/mips/bcm963xx/time.c
---- linux.old/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm963xx/time.c 2006-08-25 03:58:22.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/bcm963xx/time.c linux-2.6.19.new/arch/mips/bcm963xx/time.c
+--- linux-2.6.19/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/bcm963xx/time.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,114 @@
+/*
+<:copyright-gpl
+ * Setup time for Broadcom 963xx MIPS boards
+ */
+
-+#include <linux/config.h>
++#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+ irq_enter();
+ kstat_this_cpu.irqs[irq]++;
+
-+ timer_interrupt(irq, NULL, regs);
++ timer_interrupt(irq, regs);
+ irq_exit();
+ return IRQ_HANDLED;
+}
+}
+
+
-+void __init brcm_timer_setup(struct irqaction *irq)
++void __init plat_timer_setup(struct irqaction *irq)
+{
+ r4k_cur = (read_c0_count() + r4k_offset);
+ write_c0_compare(r4k_cur);
+ set_c0_status(IE_IRQ5);
+}
-diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
---- linux.old/arch/mips/Kconfig 2006-08-25 00:43:39.000000000 +0200
-+++ linux.dev/arch/mips/Kconfig 2006-08-25 01:57:46.000000000 +0200
-@@ -12,6 +12,15 @@
- prompt "System type"
- default SGI_IP22
-
-+config MIPS_BRCM
-+ bool "Support for the Broadcom boards"
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select IRQ_CPU
-+ help
-+ This is a fmaily of boards based on the Broadcom MIPS32
-+
- config MIPS_MTX1
- bool "4G Systems MTX-1 board"
- select DMA_NONCOHERENT
-@@ -780,6 +789,7 @@
-
- endchoice
-
-+source "arch/mips/bcm963xx/Kconfig"
- source "arch/mips/ddb5xxx/Kconfig"
- source "arch/mips/gt64120/ev64120/Kconfig"
- source "arch/mips/jazz/Kconfig"
-diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
---- linux.old/arch/mips/kernel/cpu-probe.c 2006-08-25 00:43:39.000000000 +0200
-+++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-08-25 00:39:38.000000000 +0200
-@@ -568,6 +568,25 @@
+diff -urN linux-2.6.19/arch/mips/kernel/cpu-probe.c linux-2.6.19.new/arch/mips/kernel/cpu-probe.c
+--- linux-2.6.19/arch/mips/kernel/cpu-probe.c 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/mips/kernel/cpu-probe.c 2006-12-16 18:46:31.000000000 +0100
+@@ -602,6 +602,25 @@
return;
}
static inline void cpu_probe_mips(struct cpuinfo_mips *c)
{
decode_configs(c);
-@@ -704,6 +723,9 @@
+@@ -736,6 +755,9 @@
case PRID_COMP_LEGACY:
cpu_probe_legacy(c);
break;
case PRID_COMP_MIPS:
cpu_probe_mips(c);
break;
-diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
---- linux.old/arch/mips/kernel/proc.c 2006-08-25 00:43:39.000000000 +0200
-+++ linux.dev/arch/mips/kernel/proc.c 2006-08-25 00:39:38.000000000 +0200
-@@ -85,6 +85,9 @@
+diff -urN linux-2.6.19/arch/mips/kernel/proc.c linux-2.6.19.new/arch/mips/kernel/proc.c
+--- linux-2.6.19/arch/mips/kernel/proc.c 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/mips/kernel/proc.c 2006-12-16 18:46:31.000000000 +0100
+@@ -84,6 +84,9 @@
[CPU_VR4181A] = "NEC VR4181A",
[CPU_SR71000] = "Sandcraft SR71000",
[CPU_PR4450] = "Philips PR4450",
};
-diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile 2006-08-25 00:43:39.000000000 +0200
-+++ linux.dev/arch/mips/Makefile 2006-08-25 11:36:41.000000000 +0200
-@@ -145,6 +145,19 @@
- #
-
- #
-+# Broadcom board
-+#
-+core-$(CONFIG_MIPS_BRCM) += arch/mips/bcm963xx/
-+core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/serial/impl1/
-+#core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/board/bcm963xx/impl1/
-+#core-$(CONFIG_MIPS_BRCM) += boardparms/bcm963xx/
-+#cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx
-+cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/bcm963xx/include
-+cflags-$(CONFIG_MIPS_BRCM) += -Iboardparms/bcm963xx
-+load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000
-+
-+
-+#
- # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
- #
- core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
-diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
---- linux.old/arch/mips/mm/c-r4k.c 2006-08-25 00:43:39.000000000 +0200
-+++ linux.dev/arch/mips/mm/c-r4k.c 2006-08-25 00:39:38.000000000 +0200
-@@ -914,6 +914,13 @@
+diff -urN linux-2.6.19/arch/mips/mm/c-r4k.c linux-2.6.19.new/arch/mips/mm/c-r4k.c
+--- linux-2.6.19/arch/mips/mm/c-r4k.c 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/mips/mm/c-r4k.c 2006-12-16 18:46:31.000000000 +0100
+@@ -852,6 +852,13 @@
if (!(config & MIPS_CONF_M))
panic("Don't know how to probe P-caches on this cpu.");
/*
* So we seem to be a MIPS32 or MIPS64 CPU
* So let's probe the I-cache ...
-diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
---- linux.old/arch/mips/mm/tlbex.c 2006-08-25 00:43:39.000000000 +0200
-+++ linux.dev/arch/mips/mm/tlbex.c 2006-08-25 00:39:38.000000000 +0200
-@@ -882,6 +882,9 @@
+diff -urN linux-2.6.19/arch/mips/mm/tlbex.c linux-2.6.19.new/arch/mips/mm/tlbex.c
+--- linux-2.6.19/arch/mips/mm/tlbex.c 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/mips/mm/tlbex.c 2006-12-16 18:46:31.000000000 +0100
+@@ -880,6 +880,9 @@
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
tlbw(p);
break;
-diff -urN linux.old/arch/mips/pci/fixup-bcm96348.c linux.dev/arch/mips/pci/fixup-bcm96348.c
---- linux.old/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/pci/fixup-bcm96348.c 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,85 @@
+diff -urN linux-2.6.19/arch/mips/pci/Makefile linux-2.6.19.new/arch/mips/pci/Makefile
+--- linux-2.6.19/arch/mips/pci/Makefile 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/mips/pci/Makefile 2006-12-16 18:48:18.000000000 +0100
+@@ -17,6 +17,7 @@
+ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
+ obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
+ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
++obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
+diff -urN linux-2.6.19/arch/mips/pci/fixup-bcm96348.c linux-2.6.19.new/arch/mips/pci/fixup-bcm96348.c
+--- linux-2.6.19/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/pci/fixup-bcm96348.c 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,93 @@
+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+#include <linux/init.h>
+ // Memory Window 1. Mask determines which bits are decoded.
+ mpi->l2pmrange1 = ~(size-1);
+ // UBUS to PCI Memory base address. This is akin to the ChipSelect base
-+ // register.
++ // register.
+ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
+ // UBUS to PCI Remap Address. Replaces the masked address bits in the
-+ // range register with this setting.
++ // range register with this setting.
+ // Also, enable direct I/O and direct Memory accesses
+ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
+ break;
+ case 1:
+ // Memory Window 2
+ mpi->l2pmrange2 = ~(size-1);
-+ // UBUS to PCI Memory base address.
++ // UBUS to PCI Memory base address.
+ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
+ // UBUS to PCI Remap Address
+ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
+ }
+}
+
-+struct pci_fixup pcibios_fixups[] = {
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_ANY_ID,
++ bcm96348_fixup);
++
++/*struct pci_fixup pcibios_fixups[] = {
+ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
+ {0}
-+};
-diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
---- linux.old/arch/mips/pci/Makefile 2006-08-25 00:43:29.000000000 +0200
-+++ linux.dev/arch/mips/pci/Makefile 2006-08-25 00:39:38.000000000 +0200
-@@ -18,6 +18,7 @@
- obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o
- obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
- obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
-+obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
-diff -urN linux.old/arch/mips/pci/ops-bcm96348.c linux.dev/arch/mips/pci/ops-bcm96348.c
---- linux.old/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/pci/ops-bcm96348.c 2006-08-25 00:39:38.000000000 +0200
++};*/
+diff -urN linux-2.6.19/arch/mips/pci/ops-bcm96348.c linux-2.6.19.new/arch/mips/pci/ops-bcm96348.c
+--- linux-2.6.19/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/pci/ops-bcm96348.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,276 @@
+/*
+<:copyright-gpl
+ .read = bcm96348_pcibios_read,
+ .write = bcm96348_pcibios_write
+};
-diff -urN linux.old/arch/mips/pci/pci-bcm96348.c linux.dev/arch/mips/pci/pci-bcm96348.c
---- linux.old/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/pci/pci-bcm96348.c 2006-08-25 00:39:38.000000000 +0200
+diff -urN linux-2.6.19/arch/mips/pci/pci-bcm96348.c linux-2.6.19.new/arch/mips/pci/pci-bcm96348.c
+--- linux-2.6.19/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/arch/mips/pci/pci-bcm96348.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,54 @@
+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
-+#include <asm/pci_channel.h>
++
//#include <asm/pci_channel.h>
+#include <bcmpci.h>
+
+static struct resource bcm_pci_io_resource = {
+extern struct pci_ops bcm96348_pci_ops;
+
+struct pci_controller bcm96348_controller = {
-+ .pci_ops = &bcm96348_pci_ops,
-+ .io_resource = &bcm_pci_io_resource,
-+ .mem_resource = &bcm_pci_mem_resource,
++ .pci_ops = &bcm96348_pci_ops,
++ .io_resource = &bcm_pci_io_resource,
++ .mem_resource = &bcm_pci_mem_resource,
+};
+
+static void bcm96348_pci_init(void)
+}
+
+arch_initcall(bcm96348_pci_init);
-diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c
---- linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,1056 @@
+diff -urN linux-2.6.19/drivers/serial/Makefile linux-2.6.19.new/drivers/serial/Makefile
+--- linux-2.6.19/drivers/serial/Makefile 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/drivers/serial/Makefile 2006-12-16 18:49:17.000000000 +0100
+@@ -56,3 +56,4 @@
+ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
+ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
+ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
+diff -urN linux-2.6.19/drivers/serial/bcm63xx_cons.c linux-2.6.19.new/drivers/serial/bcm63xx_cons.c
+--- linux-2.6.19/drivers/serial/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/drivers/serial/bcm63xx_cons.c 2006-12-16 18:46:31.000000000 +0100
+@@ -0,0 +1,1049 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
++#include <linux/serialP.h>
+#include <asm/uaccess.h>
+
+#include <bcmtypes.h>
+
+static struct bcm_serial multi[BCM_NUM_UARTS];
+static struct bcm_serial *lines[BCM_NUM_UARTS];
-+static struct tty_driver serial_driver;
-+static struct tty_struct *serial_table[BCM_NUM_UARTS];
++static struct tty_driver *serial_driver;
+static struct termios *serial_termios[BCM_NUM_UARTS];
+static struct termios *serial_termios_locked[BCM_NUM_UARTS];
-+static int serial_refcount;
+
+
+static void bcm_stop (struct tty_struct *tty);
+static void shutdown (struct bcm_serial * info);
+static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
+static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
-+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++static int bcm63xx_cons_write (struct tty_struct *tty,
+ const unsigned char *buf, int count);
+static int bcm63xx_cons_write_room (struct tty_struct *tty);
+static int bcm_chars_in_buffer (struct tty_struct *tty);
+ UCHAR ch = 0;
+ while ((status = info->port->intStatus) & RXINT)
+ {
-+ char flag_char = 0;
++ char flag_char = TTY_NORMAL;
+
+ if (status & RXFIFONE)
+ ch = info->port->Data; // Read the character
+ }
+ tty_insert_flip_char(tty, ch, flag_char);
+ }
-+ignore_char:
-+ if (tty)
-+ tty_flip_buffer_push(tty);
++ignore_char:;
++ tty_flip_buffer_push(tty);
++ tty_schedule_flip(tty);
++
+}
+
+
+ * ------------------------------------------------------------
+ */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++static irqreturn_t bcm_interrupt (int irq, void * dev)
+#else
+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
+#endif
+ if (!info->is_initialized)
+ return;
+
-+
-+ /*save_flags (flags);
-+ cli ();*/
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ info->port->control &= ~(BRGEN|TXEN|RXEN);
+ set_bit (TTY_IO_ERROR, &info->tty->flags);
+ info->is_initialized = 0;
+
-+ //restore_flags (flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+}
+/*
+static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
+{
+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
-+ /*save_flags(ulFlags);
-+ cli();*/
++
+ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
-+
+ switch( cFlag & (CBAUD | CBAUDEX) )
+ {
+ case B115200:
+ case CS7:
+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
+ break;
-+ /*case CS8:*/
+ default:
+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
+ break;
+
+ /* Reset and flush uart */
+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
-+ //restore_flags( ulFlags );
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
+}
+
+ * Main output routine using polled I/O.
+ * -------------------------------------------------------------------
+ */
-+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++static int bcm63xx_cons_write (struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ int c;
+ */
+static void bcm_flush_buffer (struct tty_struct *tty)
+{
++ tty_wakeup(tty);
+}
+
+/*
+
+ info = lines[line];
+
++ tty->low_latency=1;
+ info->port->intMask = 0; /* Clear any pending interrupts */
+ info->port->intMask = RXINT; /* Enable RX */
+
+ return 0;
+}
+
++
++static struct tty_operations rs_ops = {
++ .open = bcm63xx_cons_open,
++ .close = bcm63xx_cons_close,
++ .write = bcm63xx_cons_write,
++ .flush_chars = bcm63xx_cons_flush_chars,
++ .write_room = bcm63xx_cons_write_room,
++ .chars_in_buffer = bcm_chars_in_buffer,
++ .flush_buffer = bcm_flush_buffer,
++ .ioctl = bcm_ioctl,
++ .throttle = bcm_throttle,
++ .unthrottle = bcm_unthrottle,
++ .send_xchar = bcm_send_xchar,
++ .set_termios = bcm_set_termios,
++ .stop = bcm_stop,
++ .start = bcm_start,
++ .hangup = bcm_hangup,
++};
++
+/* --------------------------------------------------------------------------
+ Name: bcm63xx_serialinit
+ Purpose: Initialize our BCM63xx serial driver
+
+ // Print the driver version information
+ printk(VER_STR);
++ serial_driver = alloc_tty_driver(BCM_NUM_UARTS);
++ if (!serial_driver)
++ return -ENOMEM;
++
++ serial_driver->owner = THIS_MODULE;
++// serial_driver->devfs_name = "tts/";
++// serial_driver.magic = TTY_DRIVER_MAGIC;
++ serial_driver->name = "ttyS";
++ serial_driver->major = TTY_MAJOR;
++ serial_driver->minor_start = 64;
++// serial_driver.num = BCM_NUM_UARTS;
++ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
++ serial_driver->subtype = SERIAL_TYPE_NORMAL;
++ serial_driver->init_termios = tty_std_termios;
++ serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
++ serial_driver->flags = TTY_DRIVER_REAL_RAW;
++
++ serial_driver->termios = serial_termios;
++ serial_driver->termios_locked = serial_termios_locked;
++
++ tty_set_operations(serial_driver, &rs_ops);
+
-+ memset(&serial_driver, 0, sizeof(struct tty_driver));
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ serial_driver.owner = THIS_MODULE;
-+ serial_driver.devfs_name = "tts/";
-+#endif
-+ serial_driver.magic = TTY_DRIVER_MAGIC;
-+ serial_driver.name = "ttyS";
-+ serial_driver.major = TTY_MAJOR;
-+ serial_driver.minor_start = 64;
-+ serial_driver.num = BCM_NUM_UARTS;
-+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
-+ serial_driver.subtype = SERIAL_TYPE_NORMAL;
-+ serial_driver.init_termios = tty_std_termios;
-+ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL;
-+ serial_driver.flags = TTY_DRIVER_REAL_RAW;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ serial_driver.refcount = serial_refcount;
-+ serial_driver.ttys = serial_table;
-+#else
-+ serial_driver.refcount = &serial_refcount;
-+ serial_driver.table = serial_table;
-+#endif
-+
-+ serial_driver.termios = serial_termios;
-+ serial_driver.termios_locked = serial_termios_locked;
-+ serial_driver.open = bcm63xx_cons_open;
-+ serial_driver.close = bcm63xx_cons_close;
-+ serial_driver.write = bcm63xx_cons_write;
-+ serial_driver.flush_chars = bcm63xx_cons_flush_chars;
-+ serial_driver.write_room = bcm63xx_cons_write_room;
-+ serial_driver.chars_in_buffer = bcm_chars_in_buffer;
-+ serial_driver.flush_buffer = bcm_flush_buffer;
-+ serial_driver.ioctl = bcm_ioctl;
-+ serial_driver.throttle = bcm_throttle;
-+ serial_driver.unthrottle = bcm_unthrottle;
-+ serial_driver.send_xchar = bcm_send_xchar;
-+ serial_driver.set_termios = bcm_set_termios;
-+ serial_driver.stop = bcm_stop;
-+ serial_driver.start = bcm_start;
-+ serial_driver.hangup = bcm_hangup;
-+
-+ if (tty_register_driver (&serial_driver))
++ if (tty_register_driver (serial_driver))
+ panic("Couldn't register serial driver\n");
+
+ //save_flags(flags); cli();
+ {
+ info = &multi[i];
+ lines[i] = info;
++ info->magic = SERIAL_MAGIC;
+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
++ info->tty = 0;
+ info->irq = (2 - i) + 8;
+ info->line = i;
-+ info->tty = 0;
+ info->close_delay = 50;
+ info->closing_wait = 3000;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
-+ info->normal_termios = serial_driver.init_termios;
++ info->normal_termios = serial_driver->init_termios;
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+
+ * is updated... in request_irq - to immediatedly obliterate
+ * it is unwise.
+ */
-+ //restore_flags(flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ return 0;
+}
+static struct tty_driver * bcm_console_device(struct console * c, int *index)
+{
+ *index = c->index;
-+ return &serial_driver;
++ return serial_driver;
+}
+
+static int __init bcm_console_setup(struct console * co, char * options)
+ .write = bcm_console_print,
+ .device = bcm_console_device,
+ .setup = bcm_console_setup,
-+ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE,
++ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+}
+
+console_initcall(bcm63xx_console_init);
-diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile
---- linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,13 @@
-+# File: bcmdrivers/opensource/char/serial
-+#
-+# Makefile for the BCM63xx serial/console driver
-+
-+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
-+
-+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
-+
-+-include $(TOPDIR)/Rules.make
-+
-+clean:
-+ rm -f core *.o *.a *.s
-+
-diff -urN linux.old/boardparms/bcm963xx/boardparms.c linux.dev/boardparms/bcm963xx/boardparms.c
---- linux.old/boardparms/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/boardparms/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,2392 @@
+diff -urN linux-2.6.19/include/asm-mips/bootinfo.h linux-2.6.19.new/include/asm-mips/bootinfo.h
+--- linux-2.6.19/include/asm-mips/bootinfo.h 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/include/asm-mips/bootinfo.h 2006-12-16 18:46:31.000000000 +0100
+@@ -212,6 +212,14 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
+ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+
+/*
-+<:copyright-gpl
-+
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+
-+:>
-+*/
-+/**************************************************************************
-+ * File Name : boardparms.c
-+ *
-+ * Description: This file contains the implementation for the BCM63xx board
-+ * parameter access functions.
-+ *
-+ * Updates : 07/14/2003 Created.
-+ ***************************************************************************/
++ * Valid machtype for group BRCM
++ */
++#define MACH_GROUP_BRCM 23 /* Broadcom boards */
++#define MACH_BCM96338 0
++#define MACH_BCM96345 1
++#define MACH_BCM96348 2
+
-+/* Includes. */
-+#include <linux/config.h>
-+#include "boardparms.h"
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
+diff -urN linux-2.6.19/include/asm-mips/cpu.h linux-2.6.19.new/include/asm-mips/cpu.h
+--- linux-2.6.19/include/asm-mips/cpu.h 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/include/asm-mips/cpu.h 2006-12-16 18:46:31.000000000 +0100
+@@ -103,6 +103,13 @@
+
+ #define PRID_IMP_SR71000 0x0400
+
++/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
++ */
+
-+/* Defines. */
++#define PRID_IMP_BCM6338 0x9000
++#define PRID_IMP_BCM6345 0x8000
++#define PRID_IMP_BCM6348 0x9100
+
-+/* Default psi size in K bytes */
-+#define BP_PSI_DEFAULT_SIZE 24
+ /*
+ * Definitions for 7:0 on legacy processors
+ */
+@@ -200,7 +207,10 @@
+ #define CPU_SB1A 62
+ #define CPU_74K 63
+ #define CPU_R14000 64
+-#define CPU_LAST 64
++#define CPU_BCM6338 65
++#define CPU_BCM6345 66
++#define CPU_BCM6348 67
++#define CPU_LAST 67
+
+ /*
+ * ISA Level encodings
+diff -urN linux-2.6.19/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.19.new/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
+--- linux-2.6.19/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.new/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-12-16 18:52:30.000000000 +0100
+@@ -0,0 +1,36 @@
++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+
-+/* Typedefs */
-+typedef struct boardparameters
-+{
-+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
-+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
-+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
-+ unsigned short usSdramSize; /* SDRAM size and type */
-+ unsigned short usPsiSize; /* persistent storage in K bytes */
-+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
-+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
-+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
-+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
-+ unsigned short usGpioUartRts; /* GPIO pin or not defined */
-+ unsigned short usGpioUartCts; /* GPIO pin or not defined */
-+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
-+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
-+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
-+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
-+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
-+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
-+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
-+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
-+ unsigned short usExtIntrWireless; /* ext intr or not defined */
-+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
-+ unsigned short usExtIntrHpna; /* ext intr or not defined */
-+ unsigned short usCsHpna; /* chip select not defined */
-+ unsigned short usAntInUseWireless; /* antenna in use or not defined */
-+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
-+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
-+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
-+} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
-+
-+/* Variables */
-+#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-+static BOARD_PARAMETERS g_bcm96338sv =
-+{
-+ "96338SV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_NOT_DEFINED, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
-+ BP_NOT_DEFINED, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+static BOARD_PARAMETERS g_bcm96338l2m8m =
-+{
-+ "96338L-2M-8M", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
-+#endif
-+
-+#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-+static BOARD_PARAMETERS g_bcm96345r =
-+{
-+ "96345R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345gw2 =
-+{
-+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
-+ * Reset or RTS.
-+ */
-+ "96345GW2", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_GPIO_0_AH, /* usGpioPhySpiSck */
-+ BP_GPIO_4_AH, /* usGpioPhySpiSs */
-+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
-+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_GPIO, /* usConfigType */
-+ BP_ENET_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_1, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_15_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
-+ BP_GPIO_13_AH, /* usGpioUartRts */
-+ BP_GPIO_9_AH, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_GPIO_7_AH, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_EXT_INTR_2, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345gw =
-+{
-+ "96345GW", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_1, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_15_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_GPIO_10_AH, /* usGpioLedWireless */
-+ BP_GPIO_7_AH, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_EXT_INTR_2, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_EXT_INTR_3, /* usExtIntrHpna */
-+ BP_CS_1, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96335r =
-+{
-+ "96335R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_9_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_9_AH, /* usGpioLedWanData */
-+ BP_GPIO_8_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_9_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345r0 =
-+{
-+ "96345R0", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_9_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345rs =
-+{
-+ "96345RS", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
-+ &g_bcm96345rs, 0};
-+#endif
-+
-+#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
-+
-+static BOARD_PARAMETERS g_bcm96348r =
-+{
-+ "96348R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348lv =
-+{
-+ "96348LV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
-+ 0x02, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_GPIO_5_AL, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348gw =
-+{
-+ "96348GW", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcm96348gw_10 =
-+{
-+ "96348GW-10", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348gw_11 =
-+{
-+ "96348GW-11", /* szBoardId */
-+ {{BP_ENET_NO_PHY}, /* ucPhyType */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348sv =
-+{
-+ "96348SV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
-+ 0x1f, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_NOT_DEFINED, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
-+ BP_NOT_DEFINED, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
-+{
-+ "96348GW-DualDSP", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_UNEQUIPPED, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_DSP, /* ucDspType */
-+ 0x01, /* ucDspAddress */
-+ BP_EXT_INTR_3, /* usExtIntrVoip */
-+ BP_UNEQUIPPED , /* usGpioVoipReset */
-+ BP_GPIO_35_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_3}}, /* usCsVoip */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcmCustom_01 =
-+{
-+ "BCMCUST_01", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_36_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AL, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
-+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
-+ &g_bcmCustom_01, 0};
-+#endif
-+
-+static PBOARD_PARAMETERS g_pCurrentBp = 0;
-+
-+/**************************************************************************
-+ * Name : bpstrcmp
-+ *
-+ * Description: String compare for this file so it does not depend on an OS.
-+ * (Linux kernel and CFE share this source file.)
-+ *
-+ * Parameters : [IN] dest - destination string
-+ * [IN] src - source string
-+ *
-+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
-+ ***************************************************************************/
-+static int bpstrcmp(const char *dest,const char *src);
-+static int bpstrcmp(const char *dest,const char *src)
-+{
-+ while (*src && *dest)
-+ {
-+ if (*dest < *src) return -1;
-+ if (*dest > *src) return 1;
-+ dest++;
-+ src++;
-+ }
-+
-+ if (*dest && !*src) return 1;
-+ if (!*dest && *src) return -1;
-+ return 0;
-+} /* bpstrcmp */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipDspConfig
-+ *
-+ * Description: Gets the DSP configuration from the board parameter
-+ * structure for a given DSP index.
-+ *
-+ * Parameters : [IN] dspNum - DSP index (number)
-+ *
-+ * Returns : Pointer to DSP configuration block if found/valid, NULL
-+ * otherwise.
-+ ***************************************************************************/
-+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
-+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
-+{
-+ VOIP_DSP_INFO *pDspConfig = 0;
-+ int i;
-+
-+ if( g_pCurrentBp )
-+ {
-+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
-+ {
-+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
-+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
-+ {
-+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
-+ break;
-+ }
-+ }
-+ }
-+
-+ return pDspConfig;
-+}
-+
-+
-+/**************************************************************************
-+ * Name : BpSetBoardId
-+ *
-+ * Description: This function find the BOARD_PARAMETERS structure for the
-+ * specified board id string and assigns it to a global, static
-+ * variable.
-+ *
-+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
-+ * have a board parameters configuration record.
-+ ***************************************************************************/
-+int BpSetBoardId( char *pszBoardId )
-+{
-+ int nRet = BP_BOARD_ID_NOT_FOUND;
-+ PBOARD_PARAMETERS *ppBp;
-+
-+ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
-+ {
-+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
-+ {
-+ g_pCurrentBp = *ppBp;
-+ nRet = BP_SUCCESS;
-+ break;
-+ }
-+ }
-+
-+ return( nRet );
-+} /* BpSetBoardId */
-+
-+/**************************************************************************
-+ * Name : BpGetBoardIds
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
-+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
-+ * boundary.
-+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
-+ * were allocated in pszBoardIds.
-+ *
-+ * Returns : Number of board id strings returned.
-+ ***************************************************************************/
-+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
-+{
-+ PBOARD_PARAMETERS *ppBp;
-+ int i;
-+ char *src;
-+ char *dest;
-+
-+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
-+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
-+ {
-+ dest = pszBoardIds;
-+ src = (*ppBp)->szBoardId;
-+ while( *src )
-+ *dest++ = *src++;
-+ *dest = '\0';
-+ }
-+
-+ return( i );
-+} /* BpGetBoardIds */
-+
-+/**************************************************************************
-+ * Name : BpGetEthernetMacInfo
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
-+ * buffers.
-+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
-+ * are pointed to by pEnetInfos.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
-+{
-+ int i, nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-+ {
-+ if( i < BP_MAX_ENET_MACS )
-+ {
-+ unsigned char *src = (unsigned char *)
-+ &g_pCurrentBp->EnetMacInfos[i];
-+ unsigned char *dest = (unsigned char *) pEnetInfos;
-+ int len = sizeof(ETHERNET_MAC_INFO);
-+ while( len-- )
-+ *dest++ = *src++;
-+ }
-+ else
-+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-+ }
-+
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-+
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetEthernetMacInfo */
-+
-+/**************************************************************************
-+ * Name : BpGetSdramSize
-+ *
-+ * Description: This function returns a constant that describees the board's
-+ * SDRAM type and size.
-+ *
-+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
-+ * is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetSdramSize( unsigned long *pulSdramSize )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulSdramSize = g_pCurrentBp->usSdramSize;
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ *pulSdramSize = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetSdramSize */
-+
-+/**************************************************************************
-+ * Name : BpGetPsiSize
-+ *
-+ * Description: This function returns the persistent storage size in K bytes.
-+ *
-+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
-+ * storage size is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetPsiSize( unsigned long *pulPsiSize )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulPsiSize = g_pCurrentBp->usPsiSize;
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ *pulPsiSize = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPsiSize */
-+
-+/**************************************************************************
-+ * Name : BpGetRj11InnerOuterPairGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for changing
-+ * between the RJ11 inner pair and RJ11 outer pair.
-+ *
-+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
-+ * GPIO pin is returned in.
-+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-+ unsigned short *pusOuter )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
-+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
-+
-+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
-+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusInner = *pusOuter = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetRj11InnerOuterPairGpios */
-+
-+/**************************************************************************
-+ * Name : BpGetPressAndHoldResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the press
-+ * and hold reset button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
-+ * reset button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
-+
-+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPressAndHoldResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioVoipReset;
-+
-+ if( *pusValue != BP_NOT_DEFINED ||
-+ *pusValue == BP_UNEQUIPPED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipIntrGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioVoipIntr;
-+
-+ if( *pusValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipIntrGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPcmciaResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PCMCIA
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPcmciaResetGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
-+
-+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPcmciaResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetUartRtsCtsGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for RTS and CTS
-+ * UART signals.
-+ *
-+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
-+ * pin is returned in.
-+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
-+ * pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusRts = g_pCurrentBp->usGpioUartRts;
-+ *pusCts = g_pCurrentBp->usGpioUartCts;
-+
-+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
-+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusRts = *pusCts = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetUartRtsCtsGpios */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedAdsl;
-+
-+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED that is used when there is a DSL connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslFailLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
-+
-+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslFailLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedWireless;
-+
-+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessAntInUse
-+ *
-+ * Description: This function returns the antennas in use for wireless
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
-+ * is in use.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessAntInUse( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usAntInUseWireless;
-+
-+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessAntInUse */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesBtnGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
-+
-+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessSesBtnGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesExtIntr
-+ *
-+ * Description: This function returns the external interrupt number for the
-+ * Wireless Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * external interrup is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesExtIntr( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
-+
-+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+
-+} /* BpGetWirelessSesExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Led.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Led GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
-+
-+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+
-+} /* BpGetWirelessSesLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetUsbLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the USB
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetUsbLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedUsb;
-+
-+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetUsbLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the HPNA
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedHpna;
-+
-+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWanDataLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the WAN Data
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWanDataLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedWanData;
-+
-+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWanDataLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPppLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedPpp;
-+
-+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPppLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPppFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED that is used when there is a PPP connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppFailLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedPppFail;
-+
-+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPppFailLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderPowerOnLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the power
-+ * on LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
-+
-+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderPowerOn */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderAlarmLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the alarm
-+ * LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
-+
-+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderAlarmLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderResetCfgLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the reset
-+ * configuration LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the reset
-+ * configuration LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
-+
-+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderResetCfgLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderStopLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the break
-+ * into bootloader LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the break into
-+ * bootloader LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlStop;
-+
-+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderStopLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ *
-+ * Note : The VoIP structure would allow for having one LED per DSP
-+ * however, the board initialization function assumes only one
-+ * LED per functionality (ie one LED for VoIP). Therefore in
-+ * order to keep this tidy and simple we do not make usage of the
-+ * one-LED-per-DSP function. Instead, we assume that the LED for
-+ * VoIP is unique and associated with DSP 0 (always present on
-+ * any VoIP platform). If changing this to a LED-per-DSP function
-+ * then one need to update the board initialization driver in
-+ * bcmdrivers\opensource\char\board\bcm963xx\impl1
-+ ***************************************************************************/
-+int BpGetVoipLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioLedVoip;
-+
-+ if( *pusValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessExtIntr
-+ *
-+ * Description: This function returns the Wireless external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the wireless
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrWireless;
-+
-+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslDyingGaspExtIntr
-+ *
-+ * Description: This function returns the ADSL Dying Gasp external interrupt
-+ * number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
-+
-+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslDyingGaspExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipExtIntr
-+ *
-+ * Description: This function returns the VOIP external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * external interrupt number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pulValue = pDspInfo->usExtIntrVoip;
-+
-+ if( *pulValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaExtIntr
-+ *
-+ * Description: This function returns the HPNA external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrHpna;
-+
-+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaChipSelect
-+ *
-+ * Description: This function returns the HPNA chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * chip select number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaChipSelect( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usCsHpna;
-+
-+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaChipSelect */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipChipSelect
-+ *
-+ * Description: This function returns the VOIP chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * chip select number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pulValue = pDspInfo->usCsVoip;
-+
-+ if( *pulValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipChipSelect */
-+
-diff -urN linux.old/boardparms/bcm963xx/boardparms.h linux.dev/boardparms/bcm963xx/boardparms.h
---- linux.old/boardparms/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/boardparms/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,766 @@
-+/*
-+<:copyright-gpl
-+
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+
-+:>
-+*/
-+/**************************************************************************
-+ * File Name : boardparms.h
-+ *
-+ * Description: This file contains definitions and function prototypes for
-+ * the BCM63xx board parameter access functions.
-+ *
-+ * Updates : 07/14/2003 Created.
-+ ***************************************************************************/
-+
-+#if !defined(_BOARDPARMS_H)
-+#define _BOARDPARMS_H
-+
-+#if __cplusplus
-+extern "C" {
-+#endif
-+
-+/* Return codes. */
-+#define BP_SUCCESS 0
-+#define BP_BOARD_ID_NOT_FOUND 1
-+#define BP_VALUE_NOT_DEFINED 2
-+#define BP_BOARD_ID_NOT_SET 3
-+
-+/* Values for BpGetSdramSize. */
-+#define BP_MEMORY_8MB_1_CHIP 0
-+#define BP_MEMORY_16MB_1_CHIP 1
-+#define BP_MEMORY_32MB_1_CHIP 2
-+#define BP_MEMORY_64MB_2_CHIP 3
-+#define BP_MEMORY_32MB_2_CHIP 4
-+#define BP_MEMORY_16MB_2_CHIP 5
-+
-+/* Values for EthernetMacInfo PhyType. */
-+#define BP_ENET_NO_PHY 0
-+#define BP_ENET_INTERNAL_PHY 1
-+#define BP_ENET_EXTERNAL_PHY 2
-+#define BP_ENET_EXTERNAL_SWITCH 3
-+
-+/* Values for EthernetMacInfo Configuration type. */
-+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
-+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
-+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
-+
-+/* Values for EthernetMacInfo Reverse MII. */
-+#define BP_ENET_NO_REVERSE_MII 0
-+#define BP_ENET_REVERSE_MII 1
-+
-+/* Values for VoIPDSPInfo DSPType. */
-+#define BP_VOIP_NO_DSP 0
-+#define BP_VOIP_DSP 1
-+
-+
-+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
-+#define BP_ACTIVE_MASK 0x8000
-+#define BP_ACTIVE_HIGH 0x0000
-+#define BP_ACTIVE_LOW 0x8000
-+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
-+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
-+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
-+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
-+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
-+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
-+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
-+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
-+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
-+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
-+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
-+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
-+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
-+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
-+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
-+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
-+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
-+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
-+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
-+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
-+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
-+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
-+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
-+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
-+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
-+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
-+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
-+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
-+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
-+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
-+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
-+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
-+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
-+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
-+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
-+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
-+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
-+
-+/* Values for external interrupt assignments. */
-+#define BP_EXT_INTR_0 0
-+#define BP_EXT_INTR_1 1
-+#define BP_EXT_INTR_2 2
-+#define BP_EXT_INTR_3 3
-+
-+/* Values for chip select assignments. */
-+#define BP_CS_0 0
-+#define BP_CS_1 1
-+#define BP_CS_2 2
-+#define BP_CS_3 3
-+
-+/* Value for GPIO and external interrupt fields that are not used. */
-+#define BP_NOT_DEFINED 0xffff
-+#define BP_HW_DEFINED 0xfff0
-+#define BP_UNEQUIPPED 0xfff1
-+
-+/* Maximum size of the board id string. */
-+#define BP_BOARD_ID_LEN 16
-+
-+/* Maximum number of Ethernet MACs. */
-+#define BP_MAX_ENET_MACS 2
-+
-+/* Maximum number of VoIP DSPs. */
-+#define BP_MAX_VOIP_DSP 2
-+
-+/* Wireless Antenna Settings. */
-+#define BP_WLAN_ANT_MAIN 0
-+#define BP_WLAN_ANT_AUX 1
-+#define BP_WLAN_ANT_BOTH 3
-+
-+#if !defined(__ASSEMBLER__)
-+
-+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
-+ * then the other fields are not valid.
-+ */
-+typedef struct EthernetMacInfo
-+{
-+ unsigned char ucPhyType; /* BP_ENET_xxx */
-+ unsigned char ucPhyAddress; /* 0 to 31 */
-+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
-+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
-+ unsigned short numSwitchPorts; /* Number of PHY ports */
-+ unsigned short usConfigType; /* Configuration type */
-+ unsigned short usReverseMii; /* Reverse MII */
-+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
-+
-+
-+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
-+ * then the other fields are not valid.
-+ */
-+typedef struct VoIPDspInfo
-+{
-+ unsigned char ucDspType;
-+ unsigned char ucDspAddress;
-+ unsigned short usExtIntrVoip;
-+ unsigned short usGpioVoipReset;
-+ unsigned short usGpioVoipIntr;
-+ unsigned short usGpioLedVoip;
-+ unsigned short usCsVoip;
-+
-+} VOIP_DSP_INFO;
-+
-+
-+/**************************************************************************
-+ * Name : BpSetBoardId
-+ *
-+ * Description: This function find the BOARD_PARAMETERS structure for the
-+ * specified board id string and assigns it to a global, static
-+ * variable.
-+ *
-+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
-+ * have a board parameters configuration record.
-+ ***************************************************************************/
-+int BpSetBoardId( char *pszBoardId );
-+
-+/**************************************************************************
-+ * Name : BpGetBoardIds
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
-+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
-+ * boundary.
-+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
-+ * were allocated in pszBoardIds.
-+ *
-+ * Returns : Number of board id strings returned.
-+ ***************************************************************************/
-+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
-+
-+/**************************************************************************
-+ * Name : BpGetEthernetMacInfo
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
-+ * buffers.
-+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
-+ * are pointed to by pEnetInfos.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
-+
-+/**************************************************************************
-+ * Name : BpGetSdramSize
-+ *
-+ * Description: This function returns a constant that describees the board's
-+ * SDRAM type and size.
-+ *
-+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
-+ * is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetSdramSize( unsigned long *pulSdramSize );
-+
-+/**************************************************************************
-+ * Name : BpGetPsiSize
-+ *
-+ * Description: This function returns the persistent storage size in K bytes.
-+ *
-+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
-+ * storage size is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetPsiSize( unsigned long *pulPsiSize );
-+
-+/**************************************************************************
-+ * Name : BpGetRj11InnerOuterPairGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for changing
-+ * between the RJ11 inner pair and RJ11 outer pair.
-+ *
-+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
-+ * GPIO pin is returned in.
-+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-+ unsigned short *pusOuter );
-+
-+/**************************************************************************
-+ * Name : BpGetPressAndHoldResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the press
-+ * and hold reset button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
-+ * reset button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipIntrGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPcmciaResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PCMCIA
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPcmciaResetGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetUartRtsCtsGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for RTS and CTS
-+ * UART signals.
-+ *
-+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
-+ * pin is returned in.
-+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
-+ * pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED that is used when there is a DSL connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslFailLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessAntInUse
-+ *
-+ * Description: This function returns the antennas in use for wireless
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
-+ * is in use.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessAntInUse( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesBtnGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesExtIntr
-+ *
-+ * Description: This function returns the external interrupt number for the
-+ * Wireless Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * external interrup is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesExtIntr( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Led.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Led GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetUsbLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the USB
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetUsbLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the HPNA
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWanDataLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the WAN Data
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWanDataLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPppLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPppFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED that is used when there is a PPP connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppFailLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderPowerOnLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the power
-+ * on LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderAlarmLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the alarm
-+ * LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderResetCfgLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the reset
-+ * configuration LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the reset
-+ * configuration LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderStopLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the break
-+ * into bootloader LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the break into
-+ * bootloader LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessExtIntr
-+ *
-+ * Description: This function returns the Wireless external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the wireless
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslDyingGaspExtIntr
-+ *
-+ * Description: This function returns the ADSL Dying Gasp external interrupt
-+ * number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipExtIntr
-+ *
-+ * Description: This function returns the VOIP external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * external interrupt number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaExtIntr
-+ *
-+ * Description: This function returns the HPNA external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaChipSelect
-+ *
-+ * Description: This function returns the HPNA chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * chip select number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaChipSelect( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipChipSelect
-+ *
-+ * Description: This function returns the VOIP chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * chip select number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
-+
-+#endif /* __ASSEMBLER__ */
-+
-+#if __cplusplus
-+}
-+#endif
-+
-+#endif /* _BOARDPARMS_H */
-+
-diff -urN linux.old/boardparms/bcm963xx/Makefile linux.dev/boardparms/bcm963xx/Makefile
---- linux.old/boardparms/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/boardparms/bcm963xx/Makefile 2006-08-25 00:39:38.000000000 +0200
-@@ -0,0 +1,16 @@
-+
-+ifeq ($(CONFIG_MIPS_BRCM),y)
-+
-+# Linux
-+obj-y += boardparms.o
-+EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP)
-+-include $(TOPDIR)/Rules.make
-+
-+else
-+
-+# CFE
-+BSPOBJS += boardparms.o
-+
-+endif
-+
-+
-diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
---- linux.old/include/asm-mips/bootinfo.h 2006-08-25 00:43:22.000000000 +0200
-+++ linux.dev/include/asm-mips/bootinfo.h 2006-08-25 00:39:38.000000000 +0200
-@@ -218,6 +218,14 @@
- #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
- #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
-
-+/*
-+ * Valid machtype for group BRCM
-+ */
-+#define MACH_GROUP_BRCM 23 /* Broadcom boards */
-+#define MACH_BCM96338 0
-+#define MACH_BCM96345 1
-+#define MACH_BCM96348 2
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
-diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
---- linux.old/include/asm-mips/cpu.h 2006-08-25 00:43:22.000000000 +0200
-+++ linux.dev/include/asm-mips/cpu.h 2006-08-25 00:39:38.000000000 +0200
-@@ -103,6 +103,13 @@
-
- #define PRID_IMP_SR71000 0x0400
-
-+/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
-+ */
-+
-+#define PRID_IMP_BCM6338 0x9000
-+#define PRID_IMP_BCM6345 0x8000
-+#define PRID_IMP_BCM6348 0x9100
-+
- /*
- * Definitions for 7:0 on legacy processors
- */
-@@ -200,7 +207,10 @@
- #define CPU_SB1A 62
- #define CPU_74K 63
- #define CPU_R14000 64
--#define CPU_LAST 64
-+#define CPU_BCM6338 65
-+#define CPU_BCM6345 66
-+#define CPU_BCM6348 67
-+#define CPU_LAST 67
-
- /*
- * ISA Level encodings
-diff -urN linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
---- linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-08-25 11:27:40.000000000 +0200
-@@ -0,0 +1,36 @@
-+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 4
-+#define cpu_has_4ktlb 8
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 0x40
-+#define cpu_has_watch 0
-+#define cpu_has_mips16 0
-+#define cpu_has_divec 0x200
-+#define cpu_has_vce 0
-+#define cpu_has_cache_cdex_p 0
-+#define cpu_has_cache_cdex_s 0
-+#define cpu_has_prefetch 0x40000
-+#define cpu_has_mcheck 0x2000
-+#define cpu_has_ejtag 0x4000
-+#define cpu_has_llsc 0x10000
-+#define cpu_has_vtag_icache 0
-+#define cpu_has_dc_aliases 0
-+#define cpu_has_ic_fills_f_dc 0
-+
-+#define cpu_has_nofpuex 0
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+#define cpu_has_subset_pcaches 0
-+
-+#define cpu_dcache_line_size() 16
-+#define cpu_icache_line_size() 16
-+#define cpu_scache_line_size() 0
++#define cpu_has_tlb 1
++#define cpu_has_4kex 4
++#define cpu_has_4ktlb 8
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 0x40
++#define cpu_has_watch 0
++#define cpu_has_mips16 0
++#define cpu_has_divec 0x200
++#define cpu_has_vce 0
++#define cpu_has_cache_cdex_p 0
++#define cpu_has_cache_cdex_s 0
++#define cpu_has_prefetch 0x40000
++#define cpu_has_mcheck 0x2000
++#define cpu_has_ejtag 0x4000
++#define cpu_has_llsc 0x10000
++#define cpu_has_vtag_icache 0
++#define cpu_has_dc_aliases 0
++#define cpu_has_ic_fills_f_dc 0
++
++#define cpu_has_nofpuex 0
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++#define cpu_has_64bit_gp_regs 0
++#define cpu_has_64bit_addresses 0
++
++#define cpu_has_subset_pcaches 0
++
++#define cpu_dcache_line_size() 16
++#define cpu_icache_line_size() 16
++#define cpu_scache_line_size() 0
+
+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
-diff -urN linux.old/include/asm-mips/mach-generic/param.h linux.dev/include/asm-mips/mach-generic/param.h
---- linux.old/include/asm-mips/mach-generic/param.h 2006-08-25 00:43:22.000000000 +0200
-+++ linux.dev/include/asm-mips/mach-generic/param.h 2006-08-25 00:39:38.000000000 +0200
-@@ -8,6 +8,6 @@
- #ifndef __ASM_MACH_GENERIC_PARAM_H
- #define __ASM_MACH_GENERIC_PARAM_H
-
--#define HZ 1000 /* Internal kernel timer frequency */
-+#define HZ 200 /* Internal kernel timer frequency */
-
- #endif /* __ASM_MACH_GENERIC_PARAM_H */
-diff -urN linux.old/include/asm-mips/module.h linux.dev/include/asm-mips/module.h
---- linux.old/include/asm-mips/module.h 2006-08-25 00:43:22.000000000 +0200
-+++ linux.dev/include/asm-mips/module.h 2006-08-25 00:39:38.000000000 +0200
-@@ -113,6 +113,12 @@
+diff -urN linux-2.6.19/include/asm-mips/module.h linux-2.6.19.new/include/asm-mips/module.h
+--- linux-2.6.19/include/asm-mips/module.h 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/include/asm-mips/module.h 2006-12-16 19:03:22.000000000 +0100
+@@ -112,6 +112,12 @@
#define MODULE_PROC_FAMILY "RM9000 "
#elif defined CONFIG_CPU_SB1
#define MODULE_PROC_FAMILY "SB1 "
projects / openwrt.git / blobdiff