firmware-utils/mktplinkfw: add support for the TL-MR3220 v1
[openwrt.git] / package / madwifi / files / lib / wifi / madwifi.sh
index 3c4112a..9e0e70b 100755 (executable)
@@ -4,7 +4,7 @@ append DRIVERS "atheros"
 scan_atheros() {
        local device="$1"
        local wds
-       local adhoc sta ap
+       local adhoc ahdemo sta ap monitor
        
        config_get vifs "$device" vifs
        for vif in $vifs; do
@@ -67,36 +67,106 @@ disable_atheros() (
 
 enable_atheros() {
        local device="$1"
-       # Can only set the country code to one setting for the entire system. The last country code is the one that will be applied.
+
+       config_get regdomain "$device" regdomain
+       [ -n "$regdomain" ] && echo "$regdomain" > /proc/sys/dev/$device/regdomain
+
        config_get country "$device" country
        [ -z "$country" ] && country="0"
-       local cc="0"
-       [ -e /proc/sys/dev/$device/countrycode ] && cc="$(cat /proc/sys/dev/$device/countrycode)"
-       if [ ! "$cc" = "$country" ] ; then
-               rmmod ath_pci
-               insmod ath_pci countrycode=$country
-       fi
+       echo "$country" > /proc/sys/dev/$device/countrycode
+
+       config_get_bool outdoor "$device" outdoor "0"
+       echo "$outdoor" > /proc/sys/dev/$device/outdoor
+
        config_get channel "$device" channel
        config_get vifs "$device" vifs
        config_get txpower "$device" txpower
 
        [ auto = "$channel" ] && channel=0
 
-       local first=1
+       config_get_bool antdiv "$device" diversity
+       config_get antrx "$device" rxantenna
+       config_get anttx "$device" txantenna
+       config_get_bool softled "$device" softled
+       config_get antenna "$device" antenna
+
+       devname="$(cat /proc/sys/dev/$device/dev_name)"
+       local antgpio=
+       local invert=
+       case "$devname" in
+               NanoStation2) antgpio=7; invert=1;;
+               NanoStation5) antgpio=1; invert=1;;
+               "NanoStation Loco2") antgpio=2;;
+               "NanoStation Loco5")
+                       case "$antenna" in
+                               horizontal) antdiv=0; anttx=1; antrx=1;;
+                               vertical) antdiv=0; anttx=2; antrx=2;;
+                               *) antdiv=1; anttx=0; antrx=0;;
+                       esac
+               ;;
+       esac
+       if [ -n "$invert" ]; then
+               _set="clear"
+               _clear="set"
+       else
+               _set="set"
+               _clear="clear"
+       fi
+       if [ -n "$antgpio" ]; then
+               softled=0
+               case "$devname" in
+                       "NanoStation Loco2")
+                               antdiv=0
+                               antrx=1
+                               anttx=1
+                               case "$antenna" in
+                                       horizontal) gpioval=0;;
+                                       *) gpioval=1;;
+                               esac
+                       ;;
+                       *)
+                               case "$antenna" in
+                                       external) antdiv=0; antrx=1; anttx=1; gpioval=1;;
+                                       horizontal) antdiv=0; antrx=1; anttx=1; gpioval=0;;
+                                       vertical) antdiv=0; antrx=2; anttx=2; gpioval=0;;
+                                       auto) antdiv=1; antrx=0; anttx=0; gpioval=0;;
+                               esac
+                       ;;
+               esac
+                       
+               [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
+               gpioctl "dirout" "$antgpio" >/dev/null 2>&1
+               case "$gpioval" in
+                       0)
+                               gpioctl "$_clear" "$antgpio" >/dev/null 2>&1
+                       ;;
+                       1)
+                               gpioctl "$_set" "$antgpio" >/dev/null 2>&1
+                       ;;
+               esac
+       fi
+
+       [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
+       [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
+       [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
+       [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-
+
+       config_get distance "$device" distance
+       [ -n "$distance" ] && sysctl -w dev."$device".distance="$distance" >&-
+
        for vif in $vifs; do
-               local start_hostapd vif_txpower
-               nosbeacon=
+               local start_hostapd= vif_txpower= nosbeacon=
                config_get ifname "$vif" ifname
                config_get enc "$vif" encryption
                config_get eap_type "$vif" eap_type
                config_get mode "$vif" mode
                
                case "$mode" in
-                       sta) config_get nosbeacon "$device" nosbeacon;;
-                       adhoc) config_get nosbeacon "$vif" sw_merge;;
+                       sta) config_get_bool nosbeacon "$device" nosbeacon;;
+                       adhoc) config_get_bool nosbeacon "$vif" sw_merge 1;;
                esac
                
-               config_get ifname "$vif" ifname
+               [ "$nosbeacon" = 1 ] || nosbeacon=""
                ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon})
                [ $? -ne 0 ] && {
                        echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2
@@ -104,7 +174,6 @@ enable_atheros() {
                }
                config_set "$vif" ifname "$ifname"
 
-               # only need to change freq band and channel on the first vif
                config_get hwmode "$device" hwmode
                [ -z "$hwmode" ] && config_get hwmode "$device" mode
 
@@ -123,10 +192,8 @@ enable_atheros() {
                iwpriv "$ifname" mode "$hwmode"
                iwpriv "$ifname" pureg "$pureg"
 
-               [ "$first" = 1 ] && {
-                       iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null 
-               }
-       
+               iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null 
+
                config_get_bool hidden "$vif" hidden 0
                iwpriv "$ifname" hide_ssid "$hidden"
 
@@ -140,7 +207,7 @@ enable_atheros() {
                        1|on|enabled) wds=1;;
                        *) wds=0;;
                esac
-               iwpriv "$ifname" wds "$wds"
+               iwpriv "$ifname" wds "$wds" >/dev/null 2>&1
 
                [ "$mode" = ap -a "$wds" = 1 ] && {
                        config_get_bool wdssep "$vif" wdssep 1
@@ -148,7 +215,11 @@ enable_atheros() {
                }
 
                case "$enc" in
-                       WEP|wep)
+                       wep*)
+                               case "$enc" in
+                                       *shared*) iwpriv "$ifname" authmode 2;;
+                                       *)        iwpriv "$ifname" authmode 1;;
+                               esac
                                for idx in 1 2 3 4; do
                                        config_get key "$vif" "key${idx}"
                                        iwconfig "$ifname" enc "[$idx]" "${key:-off}"
@@ -167,60 +238,20 @@ enable_atheros() {
                esac
 
                case "$mode" in
-                       adhoc|ahdemo)
+                       sta|adhoc|ahdemo)
                                config_get addr "$vif" bssid
                                [ -z "$addr" ] || { 
                                        iwconfig "$ifname" ap "$addr"
                                }
                        ;;
                esac
-               config_get ssid "$vif" ssid
+
+               config_get_bool uapsd "$vif" uapsd 0
+               iwpriv "$ifname" uapsd "$uapsd"
 
                config_get_bool bgscan "$vif" bgscan
                [ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan"
 
-               config_get_bool antdiv "$device" diversity
-               config_get antrx "$device" rxantenna
-               config_get anttx "$device" txantenna
-               config_get_bool softled "$device" softled 1
-
-               devname="$(cat /proc/sys/dev/$device/dev_name)"
-               antgpio=
-               case "$devname" in
-                       NanoStation2) antgpio=7;;
-                       NanoStation5) antgpio=1;;
-               esac
-               if [ -n "$antgpio" ]; then
-                       softled=0
-                       config_get antenna "$device" antenna
-                       case "$antenna" in
-                               external) antdiv=0; antrx=1; anttx=1 ;;
-                               horizontal) antdiv=0; antrx=1; anttx=1 ;;
-                               vertical) antdiv=0; antrx=2; anttx=2 ;;
-                               auto) antdiv=1; antrx=0; anttx=0 ;;
-                       esac
-                       
-                       [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
-                       case "$antenna" in
-                               horizontal|vertical|auto)
-                                       gpioctl "dirout" "$antgpio" >/dev/null 2>&1
-                                       gpioctl "set" "$antgpio" >/dev/null 2>&1
-                               ;;
-                               external)
-                                       gpioctl "dirout" "$antgpio" >/dev/null 2>&1
-                                       gpioctl "clear" "$antgpio" >/dev/null 2>&1
-                               ;;
-                       esac
-               fi
-
-               [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
-               [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
-               [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
-               [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-
-
-               config_get distance "$device" distance
-               [ -n "$distance" ] && athctrl -i "$device" -d "$distance" >&-
-
                config_get rate "$vif" rate
                [ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}"
 
@@ -233,8 +264,8 @@ enable_atheros() {
                config_get rts "$vif" rts
                [ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}"
 
-               config_get_bool comp "$vif" compression
-               [ -n "$comp" ] && iwpriv "$ifname" compression "$comp"
+               config_get_bool comp "$vif" compression 0
+               iwpriv "$ifname" compression "$comp" >/dev/null 2>&1
 
                config_get_bool minrate "$vif" minrate
                [ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate"
@@ -254,9 +285,6 @@ enable_atheros() {
                config_get_bool ar "$vif" ar
                [ -n "$ar" ] && iwpriv "$ifname" ar "$ar"
 
-               config_get_bool turbo "$vif" turbo
-               [ -n "$turbo" ] && iwpriv "$ifname" turbo "$turbo"
-
                config_get_bool beacon_power "$vif" beacon_power
                [ -n "$beacon_power" ] && iwpriv "$ifname" beacon_pwr "$beacon_power"
 
@@ -298,8 +326,13 @@ enable_atheros() {
                        config_set "$vif" bridge "$bridge"
                        start_net "$ifname" "$net_cfg"
                }
-               [ -n "$ssid" ] && iwconfig "$ifname" essid on
-               iwconfig "$ifname" essid "$ssid"
+
+               config_get ssid "$vif" ssid
+               [ -n "$ssid" ] && {
+                       iwconfig "$ifname" essid on
+                       iwconfig "$ifname" essid "$ssid"
+               }
+
                set_wifi_up "$vif" "$ifname"
 
                # TXPower settings only work if device is up already
@@ -338,7 +371,6 @@ enable_atheros() {
                                fi
                        ;;
                esac
-               first=0
        done
 }
 
@@ -350,6 +382,18 @@ detect_atheros() {
                config_get type "$dev" type
                devname="$(cat /proc/sys/dev/$dev/dev_name)"
                case "$devname" in
+                       "NanoStation Loco2")
+                               EXTRA_DEV="
+# Ubiquiti NanoStation Loco2 features
+       option antenna  vertical # (horizontal|vertical)
+"
+                       ;;
+                       "NanoStation Loco5")
+                               EXTRA_DEV="
+# Ubiquiti NanoStation Loco5 features
+       option antenna  auto # (auto|horizontal|vertical)
+"
+                       ;;
                        NanoStation*)
                                EXTRA_DEV="
 # Ubiquiti NanoStation features
@@ -357,7 +401,7 @@ detect_atheros() {
 "
                        ;;
                esac
-               [ "$type" = atheros ] && return
+               [ "$type" = atheros ] && continue
                cat <<EOF
 config wifi-device  $dev
        option type     atheros
This page took 0.031036 seconds and 4 git commands to generate.