#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=hostap-driver
PKG_VERSION:=0.4.9
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378
include $(INCLUDE_DIR)/package.mk
-ifeq ($(DUMP),)
- -include $(LINUX_DIR)/.config
-endif
-define KernelPackage/hostap/Default/2.4
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-endef
-define KernelPackage/hostap/Default/2.6
- VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
-endef
define KernelPackage/hostap/Default
+ VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
SUBMENU:=Wireless Drivers
- DESCRIPTION:=\
- Host AP is a driver for 802.11b wireless cards based on Intersil \\\
- Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\
- card to act as an IEEE 802.11 access point.
URL:=http://hostap.epitest.fi/
- $(call KernelPackage/hostap/Default/$(KERNEL))
+endef
+
+define KernelPackage/hostap/Default/description
+ Host AP is a driver for 802.11b wireless cards based on Intersil
+ Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the
+ card to act as an IEEE 802.11 access point.
endef
define KernelPackage/hostap
- $(call KernelPackage/hostap/Default)
- DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-ieee80211 +kmod-crypto
+$(call KernelPackage/hostap/Default)
TITLE:=Host AP support for Prism2/2.5/3
- KCONFIG:=CONFIG_HOSTAP
- DESCRIPTION+=\\\
- \\\
- This package contains the base Host AP driver code that is shared by \\\
- different hardware models. You will also need to enable support for \\\
- PLX/PCI/CS version of the driver to actually use the driver.
+ DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-lib80211 +wireless-tools
+ KCONFIG:=CONFIG_HOSTAP CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap.ko
+ AUTOLOAD:=$(call AutoLoad,60,hostap)
endef
-define KernelPackage/hostap/2.4
- DEPENDS:=+kmod-crypto
- FILES:= \
- $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,hostap hostap_crypt_wep hostap_crypt_tkip hostap_crypt_ccmp)
+
+define KernelPackage/hostap/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the base Host AP driver code that is shared by
+ different hardware models. You will also need to enable support for
+ PLX/PCI/CS version of the driver to actually use the driver.
endef
-define KernelPackage/hostap/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,hostap)
+
+
+define KernelPackage/hostap-cs
+$(call KernelPackage/hostap/Default)
+ TITLE:=Host AP driver for PCMCIA adaptors
+ DEPENDS:=@PCMCIA_SUPPORT +kmod-hostap +kmod-pcmcia-core
+ KCONFIG:=CONFIG_HOSTAP_CS
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_cs.ko
+ AUTOLOAD:=$(call AutoLoad,60,hostap_cs)
+endef
+
+define KernelPackage/hostap-cs/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2/2.5/3 PC cards.
endef
define KernelPackage/hostap-pci
- $(call KernelPackage/hostap/Default)
- DEPENDS:=kmod-hostap
+$(call KernelPackage/hostap/Default)
TITLE:=Host AP driver for PCI adaptors
+ DEPENDS:=@PCI_SUPPORT +kmod-hostap
KCONFIG:=CONFIG_HOSTAP_PCI
- DESCRIPTION+=\\\
- \\\
- This package contains the Host AP driver for Prism2.5 PCI adaptors.
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.ko
AUTOLOAD:=$(call AutoLoad,60,hostap_pci)
endef
-define KernelPackage/hostap-pci/2.4
- FILES:= \
- $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX)
-endef
-define KernelPackage/hostap-pci/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX)
+
+define KernelPackage/hostap-pci/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2.5 PCI adaptors.
endef
define KernelPackage/hostap-plx
- $(call KernelPackage/hostap/Default)
- DEPENDS:=kmod-hostap
- KCONFIG:=CONFIG_HOSTAP_PLX
+$(call KernelPackage/hostap/Default)
TITLE:=Host AP driver for PLX9052 based PCI adaptors
- DESCRIPTION+=\\\
- \\\
- This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\
- based PCI adaptors.
+ DEPENDS:=@PCI_SUPPORT +kmod-hostap
+ KCONFIG:=CONFIG_HOSTAP_PLX
+ FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.ko
AUTOLOAD:=$(call AutoLoad,60,hostap_plx)
endef
-define KernelPackage/hostap-plx/2.4
- FILES:= \
- $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX)
-endef
-define KernelPackage/hostap-plx/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX)
+
+define KernelPackage/hostap-plx/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2/2.5/3 in PLX9052
+ based PCI adaptors.
endef
-ifeq ($(KERNEL),2.4)
- define Build/Compile
- $(MAKE) -C $(LINUX_DIR)/ \
- ARCH="$(LINUX_KARCH)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
- modules
- endef
-else
- define Build/Prepare
+define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
- endef
-
- define Build/Configure
- endef
-
- define Build/Compile
- endef
-endif
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+
+endef
+
+define KernelPackage/hostap/install
+ $(INSTALL_DIR) $(1)/lib/wifi
+ $(INSTALL_DATA) ./files/lib/wifi/hostap.sh $(1)/lib/wifi
+endef
$(eval $(call KernelPackage,hostap))
+$(eval $(call KernelPackage,hostap-cs))
$(eval $(call KernelPackage,hostap-pci))
$(eval $(call KernelPackage,hostap-plx))
projects / openwrt.git / blobdiff