ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files

[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / Kconfig

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index d4087ae..550287e 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,45 +2,112 @@ if RALINK_RT305X
 
 menu "Ralink RT350x machine selection"
 
 
 menu "Ralink RT350x machine selection"
 

+config RT305X_MACH_WR6202
+       bool "Accton WR6202"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_ALL0256N
+       bool "Allnet ALL0256N support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_W502U
+       bool "ALFA Networks W502U board support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_ARGUS_ATP52B
+       bool "Argus ATP-52B support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_RT_G32_REVB
+       bool "Asus RT-G32 revB board support"
+       select RALINK_DEV_GPIO_BUTTONS
+
+config RT305X_MACH_HW550_3G
+       bool "Aztech HW550-3G support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+

 config RT305X_MACH_F5D8235_V2
        bool "Belkin F5D8235 v2 support"
 config RT305X_MACH_F5D8235_V2
        bool "Belkin F5D8235 v2 support"

-       default y

        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_WHR_G300N
        bool "Buffalo WHR-G300N support"
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_WHR_G300N
        bool "Buffalo WHR-G300N support"

-       default y

        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_DIR_300_REVB
        bool "D-Link DIR-300 revB board support"
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_DIR_300_REVB
        bool "D-Link DIR-300 revB board support"

-       default y

        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 

-config RT305X_MACH_V22RW_2X2
-       bool "Ralink AP-RT3052-V22RW-2X2 board support"
-       default y
+config RT305X_MACH_ESR_9753
+       bool "EnGenius ESR-9753 support"

        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 

-config RT305X_MACH_WCR150GN
-       bool "Sparklan WCR-150GN support"
-       default y
+config RT305X_MACH_FONERA20N
+       bool "La Fonera20N board support"

        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 

-config RT305X_MACH_FONERA20N
-       bool "La Fonera20N board support"
-       default y
+config RT305X_MACH_MOFI3500_3GN
+       bool "MoFi Network MOFI3500-3GN support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_WR512_3GN
+       bool "SH-WR512NU/WS-WR512N1-like 3GN router"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_NW718
+       bool "Netcore NW718"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_BC2
+       bool "NexAira BC2"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_OMNI_EMB
+       bool "Omnima MiniEMBWiFi"

        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_PWH2004
        bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_PWH2004
        bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"

-       default y
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_V22RW_2X2
+       bool "Ralink AP-RT3052-V22RW-2X2 board support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_WL341V3
+       bool "Sitecom WL-341 v3 board support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_WL351
+       bool "Sitecom WL-351 support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_WCR150GN
+       bool "Sparklan WCR-150GN support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
+config RT305X_MACH_NBG_419N
+       bool "ZyXEL NBG-419N support"

        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS