-#!/bin/sh
-[ -e /etc/config/network ] && exit 0
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
-mkdir -p /etc/config
+start() {
+ [ -e /etc/config/network ] && exit 0
-(
- if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
- # WGT634u
- echo boardtype=wgt634u
- else
- strings /dev/mtdblock/3
- fi
-) | awk '
-function p(name) {
- if (c[name] != "") print name "=\"" c[name] "\""
-}
-
-BEGIN {
- FS="="
- c["lan_ifname"]="br0"
- c["lan_ifnames"]="vlan0 eth1"
- c["wan_proto"]="none"
- c["wan_ifname"]="vlan1"
- c["vlan0ports"]="1 2 3 4 5*"
- c["vlan1ports"]="0 5"
-}
+ mkdir -p /etc/config
-($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
- nvram[$1] = $2
-}
-
-END {
- # v1 hardware
- if (nvram["boardtype"] == "bcm94710dev") {
- # Linksys WRT54G v1.x
- if (nvram["boardnum"] == "42") {
- c["vlan0ports"]=""
- c["vlan1ports"]=""
- c["lan_ifnames"]="vlan2 eth2"
- }
-
- # Asus WL-500g
- if (nvram["boardnum"] == "asusX") {
- c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
- # wan_ifname=eth1
- }
- }
- if (nvram["boardtype"] == "wgt634u") {
- c["vlan0ports"] = "0 1 2 3 5*"
- c["vlan1ports"] = "4 5"
- c["lan_ifnames"] = "vlan0 ath0"
+ (
+ if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+ # WGT634u
+ echo boardtype=wgt634u
+ else
+ strings /dev/mtdblock/3
+ fi
+ ) | awk '
+ function p(cfgname, name) {
+ if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
- if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
- c["vlan0ports"] = "0 1 2 3 5*"
- c["vlan1ports"] = "4 5"
+
+ BEGIN {
+ FS="="
+ c["lan_ifname"]="eth0.0 wl0"
+ c["wan_ifname"]="eth0.1"
+ c["vlan0ports"]="1 2 3 4 5*"
+ c["vlan1ports"]="0 5"
}
-
- # WAP54G
- if ((nvram["boardnum"] == "2") || \
- (nvram["boardnum"] == "1024")) {
- c["lan_ifnames"]="eth0 eth1"
- c["wan_ifname"]=""
+
+ ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+ nvram[$1] = $2
}
-
- print "#### VLAN configuration "
- print "vlan0hwname=et0"
- print "vlan1hwname=et0"
- p("vlan0ports")
- p("vlan1ports")
- print ""
- print ""
- print "#### LAN configuration"
- print "lan_proto=\"static\""
- p("lan_ifname")
- p("lan_ifnames")
- print "lan_ipaddr=\"192.168.1.1\""
- print "lan_netmask=\"255.255.255.0\""
- print "# lan_dns=\"192.168.1.1\""
- print "# lan_gateway=\"192.168.1.1\""
-
- print ""
- print ""
-
- print "#### WAN configuration"
- print "# wan_proto: WAN protocol, available protocols:"
- print "# none: disable"
- print "# dhcp: DHCP"
- print "# static: Static IP"
- print "# pppoe: PPP over Ethernet"
- print "# pptp: Point-to-Point tunneling Protocol"
- print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\""
- print ""
- print "wan_proto=dhcp"
- p("wan_ifname")
- print "wan_device=\"" c["wan_ifname"] "\""
- print "# wan_ipaddr=\"192.168.0.2\""
- print "# wan_netmask=\"255.255.255.0\""
- print "# wan_gateway=\"192.168.0.1\""
- print "# wan_dns=\"192.168.0.1\""
- print ""
- print "## PPP over Ethernet and PPTP"
- print "# wan_ifname=\"ppp0\""
- print "# ppp_username=\"my_username\""
- print "# ppp_passwd=\"my_password\""
- print "# pptp_server_ip=\"192.168.0.1\""
+ END {
+ # v1 hardware
+ if (nvram["boardtype"] == "bcm94710dev") {
+ # Asus WL-500g
+ if (nvram["boardnum"] == "asusX") {
+ c["lan_ifname"]="eth0 eth1 wl0" # FIXME
+ c["wan_ifname"]=""
+ }
+ }
+ if (nvram["boardtype"] == "wgt634u") {
+ c["vlan0ports"] = "0 1 2 3 5*"
+ c["vlan1ports"] = "4 5"
+ c["lan_ifname"] = "eth0.0 ath0"
+ }
+ if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+ c["vlan0ports"] = "0 1 2 3 5*"
+ c["vlan1ports"] = "4 5"
+ }
+
+ # WAP54G
+ if ((nvram["boardnum"] == "2") || \
+ (nvram["boardnum"] == "1024")) {
+ c["lan_ifname"]="eth0 wl0"
+ c["wan_ifname"]=""
+ }
+
+ print "#### VLAN configuration "
+ print "config switch eth0"
+ p("vlan0", "vlan0ports")
+ p("vlan1", "vlan1ports")
+ print ""
+ print ""
+ print "#### Loopback configuration"
+ print "config interface loopback"
+ print " option ifname \"lo\""
+ print " option proto static"
+ print " option ipaddr 127.0.0.1"
+ print " option netmask 255.0.0.0"
+ print ""
+ print ""
+ print "#### LAN configuration"
+ print "config interface lan"
+ print " option type bridge"
+ p("ifname", "lan_ifname")
+ print " option proto static"
+ print " option ipaddr 192.168.1.1"
+ print " option netmask 255.255.255.0"
+ print ""
+ print ""
+ print "#### WAN configuration"
+ print "config interface wan"
+ p("ifname", "wan_ifname")
+ print " option proto dhcp"
+ }' > /etc/config/network
}
-' > /etc/config/network
projects / openwrt.git / blobdiff