fix minor typo & move loopback to network config
[openwrt.git] / package / base-files / brcm-2.4 / etc / init.d / S05netconfig
index 6a626f5..175b9a9 100755 (executable)
@@ -1,26 +1,26 @@
 #!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
 [ -e /etc/config/network ] && exit 0
 
 mkdir -p /etc/config
 
 (
-       if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
+       if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
                # WGT634u
                echo boardtype=wgt634u
        else
                strings /dev/mtdblock/3
        fi
 ) | awk '
-function p(name) {
-       if (c[name] != "") print name "=\"" c[name] "\""
+function p(cfgname, name) {
+       if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
 }
 
 BEGIN {
        FS="="
-       c["lan_ifname"]="br0"
-       c["lan_ifnames"]="vlan0 eth1"
-       c["wan_proto"]="none"
-       c["wan_ifname"]="vlan1"
+       c["lan_ifname"]="eth0.0 wl0"
+       c["wan_ifname"]="eth0.1"
        c["vlan0ports"]="1 2 3 4 5*"
        c["vlan1ports"]="0 5"
 }
@@ -32,23 +32,16 @@ BEGIN {
 END {
        # v1 hardware
        if (nvram["boardtype"] == "bcm94710dev") {
-               # Linksys WRT54G v1.x
-               if (nvram["boardnum"] == "42") {
-                       c["vlan0ports"]=""
-                       c["vlan1ports"]=""
-                       c["lan_ifnames"]="vlan2 eth2"
-               }
-
                # Asus WL-500g
                if (nvram["boardnum"] == "asusX") {
-                       c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
-                       # wan_ifname=eth1
+                       c["lan_ifname"]="eth0 eth1 wl0" # FIXME
+                       c["wan_ifname"]=""
                }
        }
        if (nvram["boardtype"] == "wgt634u") {
                c["vlan0ports"] = "0 1 2 3 5*"
                c["vlan1ports"] = "4 5"
-               c["lan_ifnames"] = "vlan0 ath0"
+               c["lan_ifname"] = "eth0.0 ath0"
        }
        if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
                c["vlan0ports"] = "0 1 2 3 5*"
@@ -58,51 +51,36 @@ END {
        # WAP54G
        if ((nvram["boardnum"] == "2") || \
                (nvram["boardnum"] == "1024")) {
-               c["lan_ifnames"]="eth0 eth1"
+               c["lan_ifname"]="eth0 wl0"
                c["wan_ifname"]=""
        }
 
        print "#### VLAN configuration "
-       print "vlan0hwname=et0"
-       print "vlan1hwname=et0"
-       p("vlan0ports")
-       p("vlan1ports")
+       print "config switch eth0"
+       p("vlan0", "vlan0ports")
+       p("vlan1", "vlan1ports")
        print ""
        print ""
-       
-       print "#### LAN configuration"
-       print "lan_proto=\"static\""
-       p("lan_ifname")
-       p("lan_ifnames")
-       print "lan_ipaddr=\"192.168.1.1\""
-       print "lan_netmask=\"255.255.255.0\""
-       print "# lan_dns=\"192.168.1.1\""
-       print "# lan_gateway=\"192.168.1.1\""
-
+       print "#### Loopback configuration"
+       print "config interface loopback"
+       print " option ifname   \"lo\""
+       print " option proto    static"
+       print " option ipaddr   127.0.0.1"
+       print " option netmask  255.0.0.0"
        print ""
        print ""
-
-       print "#### WAN configuration"
-       print "# wan_proto: WAN protocol, available protocols:"
-       print "#   none: disable"
-       print "#   dhcp: DHCP"
-       print "#   static: Static IP"
-       print "#   pppoe: PPP over Ethernet"
-       print "#   pptp: Point-to-Point tunneling Protocol"
-       print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
+       print "#### LAN configuration"
+       print "config interface lan"
+       print " option type     bridge"
+       p("ifname", "lan_ifname")
+       print " option proto    static"
+       print " option ipaddr   192.168.1.1"
+       print " option netmask  255.255.255.0"
        print ""
-       print "wan_proto=dhcp"
-       p("wan_ifname")
-       print "wan_device=\"" c["wan_ifname"] "\""
-       print "# wan_ipaddr=\"192.168.0.2\""
-       print "# wan_netmask=\"255.255.255.0\""
-       print "# wan_gateway=\"192.168.0.1\""
-       print "# wan_dns=\"192.168.0.1\""
        print ""
-       print "## PPP over Ethernet and PPTP"
-       print "# wan_ifname=\"ppp0\""
-       print "# ppp_username=\"my_username\""
-       print "# ppp_passwd=\"my_password\""
-       print "# pptp_server_ip=\"192.168.0.1\""
+       print "#### WAN configuration"
+       print "config interface wan"
+       p("ifname", "wan_ifname")
+       print " option proto    dhcp"
 }
 ' > /etc/config/network
This page took 0.028169 seconds and 4 git commands to generate.