are also logged to the system console. Enable this option if you
wish to enable the 'dmesg' utility.
+config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
+ bool "pretty dmesg output"
+ default y
+ depends on BUSYBOX_CONFIG_DMESG
+ help
+ If you wish to scrub the syslog level from the output, say 'Y' here.
+ The syslog level is a string prefixed to every line with the form "<#>".
+
+ With this option you will see:
+ # dmesg
+ Linux version 2.6.17.4 .....
+ BIOS-provided physical RAM map:
+ BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
+ Without this option you will see:
+ # dmesg
+ <5>Linux version 2.6.17.4 .....
+ <6>BIOS-provided physical RAM map:
+ <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
config BUSYBOX_CONFIG_FBSET
bool "fbset"
default n
can be used to list and edit the set of partitions or BSD style
'disk slices' that are defined on a hard drive.
-config BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
- bool
+config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
+ bool "support over 4GB disks"
default y
depends on BUSYBOX_CONFIG_FDISK
help
config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
bool "Support SUN disklabels"
default n
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
Enabling this option allows you to create or change SUN disklabels.
Most people can safely leave this option disabled.
this utility will do the job for you.
comment "Minix filesystem support"
- depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+ depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
config BUSYBOX_CONFIG_FEATURE_MINIX2
bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
config BUSYBOX_CONFIG_HWCLOCK
bool "hwclock"
- default n
+ default y
help
The hwclock utility is used to read and set the hardware clock
on a system. This is primarily used to set the current time on
bool "mdev"
default n
help
- mdev is a mini-udev implementation: call it with -s to populate
- /dev from /sys, then "echo /sbin/mdev > /proc/sys/kernel/hotplug" to
- have it handle hotplug events afterwards. Device names are taken
- from sysfs.
+ mdev is a mini-udev implementation for dynamically creating device
+ nodes in the /dev directory.
+
+ For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
bool "Support /etc/mdev.conf"
default n
depends on BUSYBOX_CONFIG_MDEV
help
- The mdev config file contains lines that look like:
-
- hd[a-z][0-9]* 0:3 660
+ Add support for the mdev config file to control ownership and
+ permissions of the device nodes.
- That's device name (with regex match), uid:gid, and permissions.
-
- Config file parsing stops on the first matching line. If no config
- entry is matched, devices are created with default 0:0 660. (Make
- the last line match .* to override this.)
+ For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
bool "Support command execution at device addition/removal"
default n
depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
help
- This adds support for an optional field to /etc/mdev.conf, consisting
- of a special character and a command line to run after creating the
- corresponding device(s) and before removing, ala:
-
- hdc root:cdrom 660 *ln -s $MDEV cdrom
+ This adds support for an optional field to /etc/mdev.conf for
+ executing commands when devices are created/removed.
- The $MDEV environment variable is set to the name of the device.
+ For more information, please see docs/mdev.txt
- The special characters and their meanings are:
- @ Run after creating the device.
- $ Run before removing the device.
- * Run both after creating and before removing the device.
+config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
+ bool "Support loading of firmwares"
+ default n
+ depends on BUSYBOX_CONFIG_MDEV
+ help
+ Some devices need to load firmware before they can be usable.
- Commands are executed via system() so you need /bin/sh, meaning you
- probably want to select a default shell in the Shells menu.
+ These devices will request userspace look up the files in
+ /lib/firmware/ and if it exists, send it to the kernel for
+ loading into the hardware.
config BUSYBOX_CONFIG_MKSWAP
bool "mkswap"
bool "version 0 support"
default n
depends on BUSYBOX_CONFIG_MKSWAP
-# depends on BUSYBOX_CONFIG_MKSWAP && BUSYBOX_CONFIG_DEPRECATED
+# depends on MKSWAP && BUSYBOX_CONFIG_DEPRECATED
help
Enable support for the old v0 style.
If your kernel is older than 2.1.117, then v0 support is the
config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
bool "Use termios to manipulate the screen"
- default y
+ default n
depends on BUSYBOX_CONFIG_MORE
help
This option allows utilities such as 'more' and 'top' to determine
NFS filesystems. Most people using BusyBox will also want to enable
the 'mount' utility.
+config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
+ bool "Support mount helpers"
+ default n
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable mounting of virtual file systems via external helpers.
+ E.g. mount obexfs#-b00.11.22.33.44.55 /mnt will in effect call
+ obexfs -b00.11.22.33.44.55 /mnt
+ The idea is to use such virtual filesystems in /etc/fstab
+
config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
bool "Support mounting NFS file systems"
default y
depends on BUSYBOX_CONFIG_MOUNT
+ select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
+ help
+ Enable mounting of NFS file systems.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
+ bool "Support mounting CIFS/SMB file systems"
+ default y
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable support for samba mounts.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
+ depends on BUSYBOX_CONFIG_MOUNT
+ bool "Support lots of -o flags in mount"
+ default y
+ help
+ Without this, mount only supports ro/rw/remount. With this, it
+ supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+ noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+ private, unbindable, rshared, rslave, rprivate, and runbindable.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+ depends on BUSYBOX_CONFIG_MOUNT
+ bool "Support /etc/fstab and -a"
+ default y
help
- Enable mounting of NFS file systems.
+ Support mount all and looking for files in /etc/fstab.
config BUSYBOX_CONFIG_PIVOT_ROOT
bool "pivot_root"
The umount command will also free that loopback device.
You can still use the 'losetup' utility (to manually associate files
- with loop devices) if you need to do something advanced, such as
+ with loop devices) if you need to do something advanced, such as
specify an offset or cryptographic options to the loopback device.
(If you don't want umount to free the loop device, use "umount -D".)
projects / openwrt.git / blobdiff