Port SPI-GPIO driver from 2.6.29-rc4

[openwrt.git] / package / hostapd / files / default.config

diff --git a/package/hostapd/files/default.config b/package/hostapd/files/default.config
index e2237d6..2414bd3 100644 (file)
--- a/package/hostapd/files/default.config
+++ b/package/hostapd/files/default.config
@@ -13,7 +13,7 @@
 CONFIG_DRIVER_HOSTAP=y
 
 # Driver interface for wired authenticator
-#CONFIG_DRIVER_WIRED=y
+CONFIG_DRIVER_WIRED=y
 
 # Driver interface for madwifi driver
 CONFIG_DRIVER_MADWIFI=y
@@ -22,6 +22,28 @@ CONFIG_DRIVER_MADWIFI=y
 # Driver interface for Prism54 driver
 #CONFIG_DRIVER_PRISM54=y
 
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl, probably not
+# shipped with your distribution yet
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for drivers using Devicescape IEEE 802.11 stack
+#CONFIG_DRIVER_DEVICESCAPE=y
+# Currently, driver_devicescape.c build requires some additional parameters
+# to be able to include some of the kernel header files. Following lines can
+# be used to set these (WIRELESS_DEV must point to the root directory of the
+# wireless-dev.git tree).
+#WIRELESS_DEV=/usr/src/wireless-dev
+#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
+# driver_devicescape.c requires a rather new libnl, probably not
+# shipped with your distribution yet
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 #CONFIG_DRIVER_BSD=y
 #CFLAGS += -I/usr/local/include
@@ -33,37 +55,79 @@ CONFIG_IAPP=y
 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y
 
-# Integrated EAP authenticator
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
 CONFIG_EAP=y
 
-# EAP-MD5 for the integrated EAP authenticator
+# EAP-MD5 for the integrated EAP server
 CONFIG_EAP_MD5=y
 
-# EAP-TLS for the integrated EAP authenticator
+# EAP-TLS for the integrated EAP server
 CONFIG_EAP_TLS=y
 
-# EAP-MSCHAPv2 for the integrated EAP authenticator
+# EAP-MSCHAPv2 for the integrated EAP server
 CONFIG_EAP_MSCHAPV2=y
 
-# EAP-PEAP for the integrated EAP authenticator
+# EAP-PEAP for the integrated EAP server
 CONFIG_EAP_PEAP=y
 
-# EAP-PSK for the integrated EAP authenticator
-CONFIG_EAP_PSK=y
-
-# EAP-GTC for the integrated EAP authenticator
+# EAP-GTC for the integrated EAP server
 CONFIG_EAP_GTC=y
 
-# EAP-TTLS for the integrated EAP authenticator
+# EAP-TTLS for the integrated EAP server
 CONFIG_EAP_TTLS=y
 
-# EAP-SIM for the integrated EAP authenticator
+# EAP-SIM for the integrated EAP server
 #CONFIG_EAP_SIM=y
 
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y
 
 # RADIUS authentication server. This provides access to the integrated EAP
-# authenticator from external hosts using RADIUS.
+# server from external hosts using RADIUS.
 #CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE 802.11r/D4.1 (Fast BSS Transition)
+# This enables an experimental implementation of a draft version of
+# IEEE 802.11r. This draft is still subject to change, so it should be noted
+# that this version may not comply with the final standard.
+#CONFIG_IEEE80211R=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y