+# Copyright (C) 2006-2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
#
-mainmenu "OpenWRT Configuration"
+mainmenu "OpenWrt Configuration"
-config MODULES
+config HAVE_DOT_CONFIG
bool
default y
-config BR2_HAVE_DOT_CONFIG
- bool
- default y
+source "target/Config.in"
-choice
- prompt "Target Architecture"
- default BR2_mipsel
- help
- Stuff
+menu "Target Images"
-config BR2_arm
- bool "arm"
+ menuconfig TARGET_ROOTFS_INITRAMFS
+ bool "ramdisk"
+ default y if USES_INITRAMFS
+ depends LINUX_2_6
+ help
+ Embed the rootfs into the kernel (initramfs)
-config BR2_armeb
- bool "armeb"
+ choice
+ prompt "Compression"
+ default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
+ default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
+ default TARGET_INITRAMFS_COMPRESSION_NONE
+ depends TARGET_ROOTFS_INITRAMFS
+ depends !LINUX_2_6_25
+ help
+ Select ramdisk compression.
-config BR2_cris
- bool "cris"
+ config TARGET_INITRAMFS_COMPRESSION_NONE
+ bool "none"
-config BR2_i386
- bool "i386"
+ config TARGET_INITRAMFS_COMPRESSION_GZIP
+ bool "gzip"
-config BR2_m68k
- bool "m68k"
+ config TARGET_INITRAMFS_COMPRESSION_BZIP2
+ bool "bzip2"
-config BR2_mips
- bool "mips"
+ config TARGET_INITRAMFS_COMPRESSION_LZMA
+ bool "lzma"
-config BR2_mipsel
- bool "mipsel"
+ config TARGET_INITRAMFS_COMPRESSION_LZO
+ bool "lzo"
+ endchoice
-config BR2_powerpc
- bool "powerpc"
+ comment "Root filesystem archives"
-config BR2_sh3
- bool "sh3"
+ config TARGET_ROOTFS_CPIOGZ
+ bool "cpio.gz"
+ default y if USES_CPIOGZ
+ help
+ Build a compressed cpio archive of the the root filesystem
-config BR2_sh3eb
- bool "sh3eb"
+ config TARGET_ROOTFS_TARGZ
+ bool "tar.gz"
+ default y if USES_TARGZ
+ help
+ Build a compressed tar archive of the the root filesystem
-config BR2_sh4
- bool "sh4"
+ comment "Root filesystem images"
-config BR2_sh4eb
- bool "sh4eb"
+ config TARGET_ROOTFS_EXT2FS
+ bool "ext2"
+ default y if USES_EXT2
+ depends !TARGET_ROOTFS_INITRAMFS
+ help
+ Ext2 file system with some free space for uml images
-config BR2_sparc
- bool "sparc"
+ config TARGET_ROOTFS_ISO
+ bool "iso"
+ default n
+ depends TARGET_ROOTFS_INITRAMFS && TARGET_x86
+ help
+ Create some bootable ISO image
-endchoice
+ config TARGET_ROOTFS_JFFS2
+ bool "jffs2"
+ default y if USES_JFFS2
+ depends !TARGET_ROOTFS_INITRAMFS
+ help
+ Build a jffs2 root filesystem
-config BR2_ARCH
- string
- default "arm" if BR2_arm
- default "armeb" if BR2_armeb
- default "cris" if BR2_cris
- default "i386" if BR2_i386
- default "m68k" if BR2_m68k
- default "mips" if BR2_mips
- default "mipsel" if BR2_mipsel
- default "powerpc" if BR2_powerpc
- default "sh3" if BR2_sh3
- default "sh3eb" if BR2_sh3eb
- default "sh4" if BR2_sh4
- default "sh4eb" if BR2_sh4eb
- default "sparc" if BR2_sparc
+ config TARGET_ROOTFS_SQUASHFS
+ bool "squashfs"
+ default y if USES_SQUASHFS
+ depends !TARGET_ROOTFS_INITRAMFS
+ help
+ Build a squashfs-lzma root filesystem
+ config TARGET_ROOTFS_UBIFS
+ bool "ubifs"
+ default y if USES_UBIFS
+ depends !TARGET_ROOTFS_INITRAMFS && USES_UBIFS
+ help
+ Build a ubifs root filesystem
-menu "Build options"
+ comment "Image Options"
-config BR2_WGET
- string "Wget command"
- default "wget --passive-ftp -nd"
+ source "target/linux/*/image/Config.in"
-config BR2_TAR_VERBOSITY
- bool "Tar verbose"
- default n
+ config TARGET_ROOTFS_PARTSIZE
+ int "Root filesystem partition size (in MB)"
+ depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT2FS || TARGET_rb532
+ default 48
+ help
+ Allows you to change the root filesystem partition size
+
+ config TARGET_ROOTFS_MAXINODE
+ int "Maximum number of inodes in root filesystem"
+ depends TARGET_ROOTFS_EXT2FS
+ default 6000
+ help
+ Allows you to change the maximum number of inodes in the root filesystem
+
+endmenu
+
+menu "Global build settings"
+
+ config ALL
+ bool "Select all packages by default"
+ default n
+
+ comment "General build options"
+
+ config BUILD_PATENTED
+ default y
+ bool "Compile with support for patented functionality"
+ help
+ When this option is disabled, software which provides patented functionality will not be built.
+ In case software provides optional support for patented functionality,
+ this optional support will get disabled for this package.
+
+ config LARGEFILE
+ bool
+ prompt "Enable large file (files > 2 GB) support"
+ default y
+ help
+ Enable large file (files > 2 GB) support.
+
+ config SHADOW_PASSWORDS
+ bool
+ prompt "Enable shadow password support"
+ default y
+ help
+ Enable shadow password support.
+
+ config CLEAN_IPKG
+ bool
+ prompt "Remove ipkg/opkg status data files in final images"
+ default n
+ help
+ This removes all ipkg/opkg status data files from the target directory before building the root fs
+
+ config COLLECT_KERNEL_DEBUG
+ bool
+ prompt "Collect kernel debug information"
+ select KERNEL_DEBUG_INFO
+ default n
+ help
+ This collects debugging symbols from the kernel and all compiled modules.
+ Useful for release builds, so that kernel issues can be debugged offline later.
+
+ comment "Kernel build options"
+
+ config KERNEL_DEBUG_FS
+ bool "Compile the kernel with Debug FileSystem enabled"
+ default y
+ depends LINUX_2_6
+ help
+ debugfs is a virtual file system that kernel developers use to put
+ debugging files into. Enable this option to be able to read and
+ write to these files.
+
+ config KERNEL_PROFILING
+ bool "Compile the kernel with profiling enabled"
+ default n
+ help
+ Enable the extended profiling support mechanisms used by profilers such
+ as OProfile.
+
+ config KERNEL_KALLSYMS
+ bool "Compile the kernel with symbol table information"
+ default n
+ help
+ This will give you more information in stack traces from kernel oopses
+
+ config KERNEL_DEBUG_KERNEL
+ bool
+ default n
+
+ config KERNEL_DEBUG_INFO
+ bool "Compile the kernel with debug information"
+ default n
+ select KERNEL_DEBUG_KERNEL
+ help
+ This will compile your kernel and modules with debug information.
+
+ config KERNEL_DEBUG_LL
+ bool
+ default n
+ depends on arm
+ help
+ ARM low level debugging
+
+ config KERNEL_EARLY_PRINTK
+ bool "Compile the kernel with early printk"
+ default n
+ depends on arm
+ select KERNEL_DEBUG_KERNEL
+ select KERNEL_DEBUG_LL if arm
+ help
+ Compile the kernel with early printk support.
+ This is only useful for debugging purposes to send messages
+ over the serial console in early boot.
+ Enable this to debug early boot problems.
+
+ comment "Package build options"
+
+ config DEBUG
+ bool
+ prompt "Compile packages with debugging info"
+ default n
+ help
+ Adds -g3 to the CFLAGS
+
+ config IPV6
+ bool
+ prompt "Enable IPv6 support in packages"
+ default y
+ help
+ Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
+
+ config PKG_BUILD_PARALLEL
+ bool
+ prompt "Compile certain packages parallelized"
+ default n
+ help
+ This adds a -jX option to certain packages that are known to
+ behave well for parallel build.
+
+ Note that this may overcommit CPU resources depending on the
+ -j level of the main make process, the number of package
+ submake jobs selected below and the number of actual CPUs present.
+ Example: If the main make is passed a -j4 and the submake -j
+ is also set to 4, we may end up with 16 parallel make processes
+ in the worst case.
+
+ You get maximum build performance, if you set the package build
+ jobs to the number of CPUs (cores) available and also start the main
+ make process with -jX, where X is the number of CPUs (cores).
+ However, make sure you have enough RAM available for
+ NR_CPUS to the power of two (NR_CPUS^2) make jobs.
+
+ If you are unsure, select N.
-config BR2_STAGING_DIR
- string "Toolchain and header file location?"
- default "$(BUILD_DIR)/staging_dir"
- help
- This is the location where the toolchain will be installed.
- Since the toolchain will not work if it is moved from this
- location, it is important for people wishing to package up
- a uClibc toolchain that this be set to the location in which
- the toolchain will be used.
-
- Most people will leave this set to the default value of
- "$(BUILD_DIR)/staging_dir".
-
-config BR2_JLEVEL
- int "Number of jobs to run simultaneously"
- default "1"
- help
- Number of jobs to run simultanesouly
+ config PKG_BUILD_JOBS
+ int
+ prompt "Number of package submake jobs (2-512)"
+ range 2 512
+ default 2
+ depends on PKG_BUILD_PARALLEL
+ help
+ The number of jobs (-jX) to pass to packages submake.
+
+ config PKG_DEFAULT_PARALLEL
+ bool
+ prompt "Always parallelize the default package build rule (Dangerous)"
+ depends on PKG_BUILD_PARALLEL
+ default n
+ help
+ Always set the default package build rules to parallel build.
+
+ WARNING: This may break build or kill your cat, as it builds
+ packages with multiple jobs that are probably not tested in
+ a parallel build environment.
+
+ Say N. Only say Y for testing.
+
+ comment "Stripping options"
+
+ choice
+ prompt "Binary stripping method"
+ default USE_STRIP if EXTERNAL_TOOLCHAIN
+ default USE_STRIP if USE_GLIBC || USE_EGLIBC
+ default USE_SSTRIP
+ help
+ Select the binary stripping method you wish to use.
+
+ config NO_STRIP
+ bool "none"
+ help
+ This will install unstripped binaries (useful for native compiling/debugging)
+
+ config USE_STRIP
+ bool "strip"
+ help
+ This will install binaries stripped using strip from binutils
+
+
+ config USE_SSTRIP
+ bool "sstrip"
+ depends !DEBUG
+ depends !USE_GLIBC
+ depends !USE_EGLIBC
+ help
+ This will install binaries stripped using sstrip
+ endchoice
+
+ config STRIP_ARGS
+ string
+ prompt "Strip arguments"
+ depends USE_STRIP
+ default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG
+ default "--strip-all"
+ help
+ Specifies arguments passed to the strip command when stripping binaries
+
+ config STRIP_KERNEL_EXPORTS
+ depends LINUX_2_6
+ bool "Strip unnecessary exports from the kernel image"
+ help
+ Reduces kernel size by stripping unused kernel exports from the kernel image
+ Note that this might make the kernel incompatible with any kernel modules that
+ were not selected at the time the kernel image was created
+
+ config USE_MKLIBS
+ bool "Strip unnecessary functions from libraries"
+ help
+ Reduces libraries to only those functions that are necessary for using all
+ selected packages (including those selected as <M>)
+ Note that this will make the system libraries incompatible with most of the packages
+ that are not selected during the build process
endmenu
+menuconfig DEVEL
+ bool "Advanced configuration options (for developers)"
+ default n
+
+ config BROKEN
+ bool "Show broken platforms / packages" if DEVEL
+ default n
+
+ config DOWNLOAD_FOLDER
+ string "Download folder" if DEVEL
+ default ""
+
+ config LOCALMIRROR
+ string "Local mirror for source packages" if DEVEL
+ default ""
+
+ config AUTOREBUILD
+ bool "Automatic rebuild of packages" if DEVEL
+ default y
+ help
+ Automatically rebuild packages when their files change
+
+ config BUILD_SUFFIX
+ string "Build suffix to append to the BUILD_DIR variable" if DEVEL
+ default ""
+ help
+ Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix
+
+ config TARGET_ROOTFS_DIR
+ string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL
+ default ""
+ help
+ Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path.
+ Use this option to re-define the location of the target root file system directory.
+
+ config CCACHE
+ bool "Use ccache" if DEVEL
+ default n
+ help
+ Compiler cache; see http://ccache.samba.org/
+
+ config EXTERNAL_KERNEL_TREE
+ string "Use external kernel tree" if DEVEL
+ default ""
+
+ config KERNEL_GIT_CLONE_URI
+ string "Enter git repository to clone" if DEVEL
+ default ""
+ help
+ Enter the full git repository path i.e.:
+ git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ This will create a git clone of the kernel in your build
+ directory.
+
+ config KERNEL_GIT_LOCAL_REPOSITORY
+ string "Enter path to local reference repository" if DEVEL
+ default ""
+ help
+ Enter a full pathname to a local reference git repository.
+ In this instance, the --refererence option of git clone will
+ be used thus creating a quick local clone of your repo.
+
+menuconfig TARGET_OPTIONS
+ bool "Target Options" if DEVEL
+
+ config TARGET_OPTIMIZATION
+ string "Target Optimizations" if TARGET_OPTIONS
+ default DEFAULT_TARGET_OPTIMIZATION
+ help
+ Optimizations to use when building for the target host.
+
+ config SOFT_FLOAT
+ bool "Use software floating point by default" if TARGET_OPTIONS
+ default y
+ depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU
+ help
+ If your target CPU does not have a Floating Point Unit (FPU) or a
+ kernel FPU emulator, but you still wish to support floating point
+ functions, then everything will need to be compiled with soft floating
+ point support (-msoft-float).
+
+ Most people will answer N.
+
source "toolchain/Config.in"
-source "package/Config.in"
-source "target/Config.in"
+
+source "target/imagebuilder/Config.in"
+source "target/sdk/Config.in"
+source "target/toolchain/Config.in"
+
+source "tmp/.config-package.in"
projects / openwrt.git / blobdiff