[ar71xx] reorganize PCI code

[openwrt.git] / target / linux / brcm63xx / files / arch / mips / bcm63xx / boards / board_bcm963xx.c

diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
index c41951b..b9ff975 100644 (file)
--- a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -24,6 +24,7 @@
 #include <bcm63xx_dev_uart.h>
 #include <bcm63xx_dev_wdt.h>
 #include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
 #include <bcm63xx_dev_pcmcia.h>
 #include <bcm63xx_dev_usb_ohci.h>
 #include <bcm63xx_dev_usb_ehci.h>
@@ -45,11 +46,11 @@ static struct board_info board;
 static struct board_info __initdata board_96338gw = {
        .name                           = "96338GW",
        .expected_cpu_id                = 0x6338,
-
+       
        .has_enet0                      = 1,
        .enet0 = {
-               .has_phy                = 1,
-               .use_internal_phy       = 1,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
        },
 
        .has_ohci0                      = 1,
@@ -58,8 +59,22 @@ static struct board_info __initdata board_96338gw = {
 static struct board_info __initdata board_96338w = {
        .name                           = "96338W",
        .expected_cpu_id                = 0x6338,
-
+       
        .has_enet0                      = 1,
+       .enet0 = {
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       }
+};
+#endif
+
+/*
+ * known 6345 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6345
+static struct board_info __initdata board_96345gw2 = {
+       .name                           = "96345GW2",
+       .expected_cpu_id                = 0x6345,
 };
 #endif
 
@@ -100,6 +115,14 @@ static struct board_info __initdata board_96348gw_10 = {
        .has_ohci0                      = 1,
        .has_pccard                     = 1,
        .has_ehci0                      = 1,
+
+       .has_dsp                        = 1,
+       .dsp = {
+               .gpio_rst               = 6,
+               .gpio_int               = 34,
+               .cs                     = 2,
+               .ext_irq                = 2,
+       },
 }; 
 
 static struct board_info __initdata board_96348gw_11 = {
@@ -143,7 +166,15 @@ static struct board_info __initdata board_96348gw = {
                .force_duplex_full      = 1,
        },
 
-       .has_ohci0 = 1,
+       .has_ohci0                      = 1,
+       .has_dsp                        = 1,
+       
+       .dsp = {
+               .gpio_rst               = 6,
+               .gpio_int               = 34,
+               .ext_irq                = 2,
+               .cs                     = 2,
+       },
 };
 
 static struct board_info __initdata board_FAST2404 = {
@@ -296,6 +327,9 @@ static const struct board_info __initdata *bcm963xx_boards[] = {
        &board_96338gw,
        &board_96338w,
 #endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+#endif
 #ifdef CONFIG_BCM63XX_CPU_6348
        &board_96348r,
        &board_96348gw,
@@ -326,7 +360,7 @@ void __init board_prom_init(void)
        /* read base address of boot chip select (0) 
         * 6338/6345 does not have MPI but boots from standard
         * MIPS Flash address */
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6345())
+       if (BCMCPU_IS_6345())
                val = 0x1fc00000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));
@@ -542,6 +576,10 @@ int __init board_register_devices(void)
 
        if (board.has_udc0)
                bcm63xx_udc_register();
+
+       if (board.has_dsp)
+               bcm63xx_dsp_register(&board.dsp);
+       
        /* Generate MAC address for WLAN and
         * register our SPROM */
 #ifdef CONFIG_PCI
@@ -554,7 +592,7 @@ int __init board_register_devices(void)
 #endif
 
        /* read base address of boot chip select (0) */
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6345())
+       if (BCMCPU_IS_6345())
                val = 0x1fc0000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));