ramips: add support for the Senao/EnGenius ESR-9753 board

[openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index cd0feaf..bb1d90e 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -2,125 +2,92 @@
 
 . /etc/functions.sh
 . /lib/ramips.sh
+. /lib/functions/uci-defaults.sh
 
 if [ ! -x /usr/sbin/maccalc ]; then
        echo "$0: maccalc not found!"
        return
 fi
 
-create_lan_wan()
+ramips_setup_interfaces()
 {
-       uci batch <<EOF
-set network.lan.ifname=eth0.1
-set network.wan=interface
-set network.wan.ifname=eth0.2
-set network.wan.proto=dhcp
-commit network
-EOF
-}
+       local board="$1"
 
-get_mac_binary()
-{
-       local mtdname="$1"
-       local seek="$2"
-       local part
+       ucidef_set_interface_loopback
 
-       part=$(find_mtd_part "$mtdname")
-       if [ -z "$part" ]; then
-               echo "get_mac_binary: partition $mtdname not found!" >&2
-               return
-       fi
+       case $board in
+       argus-atp52b | \
+       b2c | \
+       f5d8235-v2 | \
+       nw718)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ;;
 
-       dd bs=1 skip=$seek count=6 if=$part 2>/dev/null | /usr/sbin/maccalc bin2mac
-}
+       rt-n15)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "rtl8366s" "1" "1"
+               ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+               ;;
 
-get_mac_nvram()
-{
-       local mtdname="$1"
-       local key="$2"
-       local part
-       local mac_dirty
-
-       part=$(find_mtd_part "$mtdname")
-       if [ -z "$part" ]; then
-               echo "get_mac_nvram: partition $mtdname not found!" >&2
-               return
-       fi
-
-       mac_dirty=$(strings "$part" | sed -n 's/'"$key"'=//p')
-       # "canonicalize" mac
-       maccalc add "$mac_dirty" 0
+       *)
+               RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
+               if [ -n "${RT3X5X}" ]; then
+                       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               else
+                       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               fi
+               ;;
+       esac
 }
 
-set_macs()
+ramips_setup_macs()
 {
-       local lan_mac="$1"
-       local wan_mac="$2"
+       local board="$1"
+       local lan_mac=""
+       local wan_mac=""
 
-       echo "Setting LAN mac address to: $lan_mac" >&2
-       echo "Setting WAN mac address to: $wan_mac" >&2
+       case $board in
+       f5d8235-v2)
+               lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
 
-       uci batch <<EOF
-set network.lan.macaddr='$lan_mac'
-set network.wan.macaddr='$wan_mac'
-commit network
-EOF
-}
+       argus-atp52b | \
+       b2c | \
+       nw718 | \
+       rt-n15)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
 
-set_macs_only_lan()
-{
-       local lan_mac="$1"
-       local wan_mac
+       dir-300-b1 |\
+       dir-300-b2 |\
+       dir-600-b1)
+               lan_mac=$(ramips_get_mac_binary devdata 16388)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
 
-       wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+       esr-9753 | \
+       nbg-419n)
+                lan_mac=$(ramips_get_mac_binary factory 4)
+                wan_mac=$(ramips_get_mac_binary factory 40)
+               ;;
+       esac
 
-       set_macs "$lan_mac" "$wan_mac"
+       [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
+       [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
 }
 
-set_macs_only_lan_from_mtd()
-{
-       local mtdname="$1"
-       local seek="$2"
-       local lan_mac
+[ -e /etc/config/network ] && exit 0
 
-       lan_mac=$(get_mac_binary "$mtdname" "$seek")
-       if [ -z $lan_mac ]; then
-               echo "set_macs_only_lan_from_mtd: can't extract mac address from $part" >&2
-               return
-       fi
+touch /etc/config/network
 
-       set_macs_only_lan "$lan_mac"
-}
-
-set_macs_only_lan_from_nvram()
-{
-       local mtdname="$1"
-       local key="$2"
-       local lan_mac
-
-       lan_mac=$(get_mac_nvram "$mtdname" "$key")
-       if [ -z $lan_mac ]; then
-               echo "set_macs_only_lan_from_nvram: can't extract mac address from $part" >&2
-               return
-       fi
+board=$(ramips_board_name)
 
-       set_macs_only_lan "$lan_mac"
-}
+ramips_setup_interfaces $board
+ramips_setup_macs $board
 
-board=$(ramips_board_name)
+uci commit network
 
-case $board in
-       f5d8235-v2)
-               create_lan_wan
-               set_macs_only_lan_from_mtd "u-boot" 262148
-               ;;
-       argus-atp52b | \
-       nw718)
-               create_lan_wan
-               set_macs_only_lan_from_mtd "factory" 4
-               ;;
-       *)
-               RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
-               [ -z "${RT3X5X}" ] || create_lan_wan
-               ;;
-esac
+exit 0