mpc85xx: fix up kernel config and make the target boot on the MPC8568E-MDS-PB board
[openwrt.git] / target / linux / generic / files / drivers / net / phy / rtl8366s.c
index ad631ef..f9a4c8c 100644 (file)
@@ -25,6 +25,7 @@
 #define RTL8366S_PHY_NO_MAX    4
 #define RTL8366S_PHY_PAGE_MAX  7
 #define RTL8366S_PHY_ADDR_MAX  31
+#define RTL8366S_PHY_WAN       4
 
 /* Switch Global Configuration register */
 #define RTL8366S_SGCR                          0x0000
@@ -579,13 +580,13 @@ static int rtl8366s_set_mc_index(struct rtl8366_smi *smi, int port, int index)
                                        RTL8366S_PORT_VLAN_CTRL_SHIFT(port));
 }
 
-static int rtl8366s_vlan_set_vlan(struct rtl8366_smi *smi, int enable)
+static int rtl8366s_enable_vlan(struct rtl8366_smi *smi, int enable)
 {
        return rtl8366_smi_rmwr(smi, RTL8366S_SGCR, RTL8366S_SGCR_EN_VLAN,
                                (enable) ? RTL8366S_SGCR_EN_VLAN : 0);
 }
 
-static int rtl8366s_vlan_set_4ktable(struct rtl8366_smi *smi, int enable)
+static int rtl8366s_enable_vlan4k(struct rtl8366_smi *smi, int enable)
 {
        return rtl8366_smi_rmwr(smi, RTL8366S_VLAN_TB_CTRL_REG,
                                1, (enable) ? 1 : 0);
@@ -593,7 +594,12 @@ static int rtl8366s_vlan_set_4ktable(struct rtl8366_smi *smi, int enable)
 
 static int rtl8366s_is_vlan_valid(struct rtl8366_smi *smi, unsigned vlan)
 {
-       if (vlan == 0 || vlan >= RTL8366S_NUM_VLANS)
+       unsigned max = RTL8366S_NUM_VLANS;
+
+       if (smi->vlan4k_enabled)
+               max = RTL8366S_NUM_VIDS - 1;
+
+       if (vlan == 0 || vlan >= max)
                return 0;
 
        return 1;
@@ -608,32 +614,6 @@ static int rtl8366s_sw_reset_mibs(struct switch_dev *dev,
        return rtl8366_smi_rmwr(smi, RTL8366S_MIB_CTRL_REG, 0, (1 << 2));
 }
 
-static int rtl8366s_sw_get_vlan_enable(struct switch_dev *dev,
-                                      const struct switch_attr *attr,
-                                      struct switch_val *val)
-{
-       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
-       u32 data;
-
-       if (attr->ofs == 1) {
-               rtl8366_smi_read_reg(smi, RTL8366S_SGCR, &data);
-
-               if (data & RTL8366S_SGCR_EN_VLAN)
-                       val->value.i = 1;
-               else
-                       val->value.i = 0;
-       } else if (attr->ofs == 2) {
-               rtl8366_smi_read_reg(smi, RTL8366S_VLAN_TB_CTRL_REG, &data);
-
-               if (data & 0x0001)
-                       val->value.i = 1;
-               else
-                       val->value.i = 0;
-       }
-
-       return 0;
-}
-
 static int rtl8366s_sw_get_blinkrate(struct switch_dev *dev,
                                     const struct switch_attr *attr,
                                     struct switch_val *val)
@@ -662,18 +642,6 @@ static int rtl8366s_sw_set_blinkrate(struct switch_dev *dev,
                                val->value.i);
 }
 
-static int rtl8366s_sw_set_vlan_enable(struct switch_dev *dev,
-                                      const struct switch_attr *attr,
-                                      struct switch_val *val)
-{
-       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
-
-       if (attr->ofs == 1)
-               return rtl8366s_vlan_set_vlan(smi, val->value.i);
-       else
-               return rtl8366s_vlan_set_4ktable(smi, val->value.i);
-}
-
 static int rtl8366s_sw_get_learning_enable(struct switch_dev *dev,
                                           const struct switch_attr *attr,
                                           struct switch_val *val)
@@ -849,16 +817,16 @@ static struct switch_attr rtl8366s_globals[] = {
                .type = SWITCH_TYPE_INT,
                .name = "enable_vlan",
                .description = "Enable VLAN mode",
-               .set = rtl8366s_sw_set_vlan_enable,
-               .get = rtl8366s_sw_get_vlan_enable,
+               .set = rtl8366_sw_set_vlan_enable,
+               .get = rtl8366_sw_get_vlan_enable,
                .max = 1,
                .ofs = 1
        }, {
                .type = SWITCH_TYPE_INT,
                .name = "enable_vlan4k",
                .description = "Enable VLAN 4K mode",
-               .set = rtl8366s_sw_set_vlan_enable,
-               .get = rtl8366s_sw_get_vlan_enable,
+               .set = rtl8366_sw_set_vlan_enable,
+               .get = rtl8366_sw_get_vlan_enable,
                .max = 1,
                .ofs = 2
        }, {
@@ -947,7 +915,7 @@ static int rtl8366s_switch_init(struct rtl8366_smi *smi)
        dev->name = "RTL8366S";
        dev->cpu_port = RTL8366S_PORT_NUM_CPU;
        dev->ports = RTL8366S_NUM_PORTS;
-       dev->vlans = RTL8366S_NUM_VLANS;
+       dev->vlans = RTL8366S_NUM_VIDS;
        dev->ops = &rtl8366_ops;
        dev->devname = dev_name(smi->parent);
 
@@ -1055,9 +1023,11 @@ static struct rtl8366_smi_ops rtl8366s_smi_ops = {
        .set_mc_index   = rtl8366s_set_mc_index,
        .get_mib_counter = rtl8366_get_mib_counter,
        .is_vlan_valid  = rtl8366s_is_vlan_valid,
+       .enable_vlan    = rtl8366s_enable_vlan,
+       .enable_vlan4k  = rtl8366s_enable_vlan4k,
 };
 
-static int __init rtl8366s_probe(struct platform_device *pdev)
+static int __devinit rtl8366s_probe(struct platform_device *pdev)
 {
        static int rtl8366_smi_version_printed;
        struct rtl8366s_platform_data *pdata;
@@ -1121,6 +1091,10 @@ static int rtl8366s_phy_config_init(struct phy_device *phydev)
 
 static int rtl8366s_phy_config_aneg(struct phy_device *phydev)
 {
+       /* phy 4 might be connected to a second mac, allow aneg config */
+       if (phydev->addr == RTL8366S_PHY_WAN)
+               return genphy_config_aneg(phydev);
+
        return 0;
 }
 
This page took 0.029728 seconds and 4 git commands to generate.