#
-# Copyright (C) 2008-2010 OpenWrt.org
+# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
endef
+define sysupname
+$(call imgname,$(1),$(2))-sysupgrade.bin
+endef
+
VMLINUX:=$(IMG_PREFIX)-vmlinux
UIMAGE:=$(IMG_PREFIX)-uImage
+fs_squash:=squashfs-only
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+ fs_squash:=initramfs
VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
endif
endef
endif
+define mkcmdline
+board=$(1) console=$(2),$(3)
+endef
+
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
-d $(2) $(3)
endef
+define MkImageLzma
+ $(call PatchKernelLzma,$(1),$(2))
+ $(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage)
+endef
+
+define CatFiles
+ if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
+ echo "Warning: $(1) is too big"; \
+ else if [ `stat -c%s $(3)` -gt $(4) ]; then \
+ echo "Warning: $(3) is too big"; \
+ else \
+ ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
+ fi; fi
+endef
+
+define Sysupgrade/KRuImage
+ $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)))
+endef
+
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
+ $(call Image/Build/Initramfs)
endef
define BuildFirmware/Generic
- $(call PatchKernelLzma,$(2),$(3) $($(4)))
- $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
- if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
- echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
- else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
- echo "Warning: $(KDIR)/root.$(1) is too big"; \
- else \
+ $(call MkImageLzma,$(2),$(3) $($(4)))
+ $(call Sysupgrade/KRuImage,$(1),$(2),$(5),$(6))
+endef
+
+define BuildFirmware/Generic/initramfs
+ $(call MkImageLzma,$(2),$(3) $($(4)))
+ $(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
+endef
+
+define BuildFirmware/WL341V3
+ $(call MkImageLzma,$(2),$(3) $($(4)))
+ $(call Sysupgrade/KRuImage,$(1),$(2),$(5),$(6))
+ if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
+ dd if=/dev/zero bs=195936 count=1; \
+ echo "1.01"; \
+ dd if=/dev/zero bs=581 count=1; \
+ echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
+ dd if=/dev/zero bs=65552 count=1; \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
- ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
- fi; fi
+ dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(5) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
+ echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
+ ) > $(call imgname,$(1),$(2))-factory.bin; \
+ fi
endef
define BuildFirmware/Buffalo
- $(call PatchKernelLzma,$(2),board=$(3) $($(4)))
- $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
- if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
- echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
- else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
- echo "Warning: $(KDIR)/root.$(1) is too big"; \
- else \
+ $(call MkImageLzma,$(2),$(3) $($(4)))
+ $(call Sysupgrade/KRuImage,$(1),$(2),$(5),$(6))
+ if [ -e "$(call sysupname,$(1),$(2))" ]; then \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/vmlinux-$(2).uImage \
-o $(KDIR)/vmlinux-$(2).uImage.enc; \
-i $(KDIR)/vmlinux-$(2).uImage.enc \
-i $(KDIR)/root.$(2).enc \
-o $(call imgname,$(1),$(2))-factory-EU.bin; \
- fi; fi
+ fi
+endef
+
+define BuildFirmware/Buffalo2
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6))
endef
define BuildFirmware/NW718
fi; fi
endef
+define BuildFirmware/Edimax
+ mkedimaximg -i $(call sysupname,$(1),$(2)) \
+ -o $(call imgname,$(1),$(2))-factory.bin \
+ -s $(3) -m $(4) -f $(5) -S $(6)
+endef
+
+define Image/Build/Template/initramfs/initramfs
+ $(call Image/Build/Template/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
+endef
+
+define Image/Build/Template/squashfs-only/squashfs
+ $(call Image/Build/Template/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
+endef
+
mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
define Image/Build/Template/GENERIC_4M
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
+ $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_4M,851968,3014656)
endef
-mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
+define Image/Build/Template/GENERIC_4M/initramfs
+ $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_4M)
+endef
+
+mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
+kernel_size_8M=917504
+rootfs_size_8M=7143424
define Image/Build/Template/GENERIC_8M
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,851968,7208960)
+ $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M))
+endef
+
+define Image/Build/Template/GENERIC_8M/initramfs
+ $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_8M)
endef
-mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
-mtd_dir300b1_kernel_part_size=851968
-mtd_dir300b1_rootfs_part_size=3014656
+mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
+mtd_dir300b1_kernel_part_size=917504
+mtd_dir300b1_rootfs_part_size=2949120
define Image/Build/Template/DIR300B1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
mkwrgimg -s $(4) -d /dev/mtdblock/2 \
- -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+ -i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin
endef
$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
endef
+define Image/Build/Profile/WR6202
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200)
+endef
+
+mtdlayout_sercomm_4M=mtdparts=physmap-flash.0:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,832k(kernel),2944k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash)
+define Image/Build/Template/WL341V3
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656)
+ $(call BuildFirmware/WL341V3,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656)
+endef
+
+define Image/Build/Profile/WL341V3
+ $(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3)
+endef
+
define Image/Build/Profile/DIR300B1
- $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
- $(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
- $(call Image/Build/Template/DIR300B1,$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
+ $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
+ $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
+ $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
endef
mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
endef
define Image/Build/Profile/RTG32B1
- $(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
+ $(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
+endef
+
+define Image/Build/Profile/ESR9753
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600)
+endef
+
+define Image/Build/Template/FONERA20N
+ $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N,ttyS1,57600)
+ $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
endef
define Image/Build/Profile/FONERA20N
- $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
+ $(call Image/Build/Template/$(fs_squash)/$(1),FONERA20N)
+endef
+
+define Image/Build/Profile/BC2
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600)
+endef
+
+mtdlayout_all0256n=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+define Image/Build/Template/ALL0256N
+ $(call BuildFirmware/Generic,$(1),all0256n,board=ALL0256N,mtdlayout_all0256n,851968,3014656)
+endef
+
+define Image/Build/Profile/ALL0256N
+ $(call Image/Build/Template/$(fs_squash)/$(1),ALL0256)
endef
define Image/Build/Profile/NBG419N
- $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,nbg-419n,NBG419N,ttyS1,57600)
+endef
+
+define Image/Build/Profile/WL351
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-351,WL-351,ttyS1,57600)
endef
define Image/Build/Profile/NW718
- $(call Image/Build/Template/NW718,$(1),nw718,NW718)
+ $(call Image/Build/Template/$(fs_squash)/$(1),NW718,nw718,NW718)
+endef
+
+define Image/Build/Profile/OMNIEMB
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,omni-emb,OMNI-EMB,ttyS1,57600)
endef
define Image/Build/Profile/PWH2004
- $(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,pwh2004,PWH2004,ttyS1,57600)
endef
define Image/Build/Profile/V22RW2X2
- $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600)
endef
mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
-define Image/Build/Profile/WHRG300N
- $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
- $(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088)
+define Image/Build/Template/WHRG300N
+ $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600)
+ $(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600),mtdlayout_whrg300n,983040,3801088)
( \
echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
dd bs=512 count=1 conv=sync; \
- dd if=$(call imgname,$(1),whr-g300n)-sysupgrade.bin; \
+ dd if=$(call sysupname,$(1),whr-g300n); \
) > $(KDIR)/whr-g300n-tftp.tmp
buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
-o $(call imgname,$(1),whr-g300n)-tftp.bin
endef
-define Image/Build/Profile/HW5503G
- $(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
+define Image/Build/Profile/WHRG300N
+ $(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N)
endef
-define Image/Build/Profile/MOFI35003GN
- $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
+define Image/Build/Profile/HW5503G
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,hw550-3g,HW550-3G,ttyS1,57600)
endef
-mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
-mtd_wcr150gn_kernel_part_size=851968
-mtd_wcr150gn_rootfs_part_size=3014656
-define Image/Build/Template/WCR150GN
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_wcr150gn,$(mtd_wcr150gn_kernel_part_size),$(mtd_wcr150gn_rootfs_part_size))
+define Image/Build/Profile/MOFI35003GN
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,mofi3500-3gn,MOFI3500-3GN,ttyS1,57600)
endef
define Image/Build/Profile/WCR150GN
- $(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN)
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wcr150gn,WCR150GN,ttyS1,57600)
endef
+define Image/Build/Profile/W502U
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200)
+endef
mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
mtd_argus_atp52b_kernel_part_size=1179648
endef
define Image/Build/Profile/ARGUS_ATP52B
- $(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
+ $(call Image/Build/Template/$(fs_squash)/$(1),ARGUS_ATP52B,argus_atp52b,ARGUS_ATP52B)
endef
mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
mtd_f5d8235_kernel_part_size=1572864
mtd_f5d8235_rootfs_part_size=6356992
-define Image/Build/Template/F5D8235V2
+define Image/Build/Template/F5D8235
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
endef
define Image/Build/Profile/F5D8235V2
- $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
+ $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v2,F5D8235_V2)
endef
-
-mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
-mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
define Image/Build/Profile/WR5123GN
- $(call BuildFirmware/Generic,$(1),wr512-3gn-4M,board="WR512-3GN",mtdlayout_wr5123gn,851968,3014656)
- $(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wr512-3gn-4M,WR512-3GN,ttyS1,57600)
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600)
endef
+define Image/Build/Profile/SLR7205
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600)
+endef
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
+ $(call Image/Build/Profile/BC2,$(1))
+ $(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/DIR300B1,$(1))
+ $(call Image/Build/Profile/ESR9753,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/V22RW2X2,$(1))
$(call Image/Build/Profile/NBG419N,$(1))
$(call Image/Build/Profile/NW718,$(1))
+ $(call Image/Build/Profile/OMNIEMB,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
+ $(call Image/Build/Profile/SLR7205,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/HW5503G,$(1))
$(call Image/Build/Profile/MOFI35003GN,$(1))
+ $(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WR5123GN,$(1))
+ $(call Image/Build/Profile/WL341V3,$(1))
+ $(call Image/Build/Profile/WL351,$(1))
+ $(call Image/Build/Profile/WR6202,$(1))
+endef
+endif
+
+define Image/Build/Profile/F5D8235V1
+ $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v1,F5D8235_V1)
+endef
+
+define Image/Build/Profile/RTN15
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,rt-n15,RT-N15,ttyS1,57600)
+endef
+
+define Image/Build/Profile/V11STFE
+ $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v11st-fe,V11ST-FE,ttyS1,57600)
+endef
+
+mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware)
+define Image/Build/Template/WLITX4AG300N
+ $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120)
+endef
+
+define Image/Build/Profile/WLITX4AG300N
+ $(call Image/Build/Template/$(fs_squash)/$(1),WLITX4AG300N)
+endef
+
+ifeq ($(CONFIG_RALINK_RT288X),y)
+define Image/Build/Profile/Default
+ $(call Image/Build/Profile/F5D8235V1,$(1))
+ $(call Image/Build/Profile/RTN15,$(1))
+ $(call Image/Build/Profile/V11STFE,$(1))
+ $(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
endif
+define Image/Build/Initramfs
+ $(call Image/Build/Profile/$(PROFILE),initramfs)
+endef
+
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef