bcm63xx: add gpio leds to alice gate

[openwrt.git] / target / linux / amazon / config-2.6.21

diff --git a/target/linux/amazon/config-2.6.21 b/target/linux/amazon/config-2.6.21
index 790202f..cfe6fa5 100644 (file)
--- a/target/linux/amazon/config-2.6.21
+++ b/target/linux/amazon/config-2.6.21
@@ -1,18 +1,15 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_AMAZON=y
+CONFIG_ADM6996_SUPPORT=y
 CONFIG_AMAZON_ASC_UART=y
 CONFIG_AMAZON_MTD=y
 CONFIG_AMAZON_NET_SW=y
 CONFIG_AMAZON_PCI=y
 CONFIG_AMAZON_WDT=y
+CONFIG_AMAZON=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_BCM43XX is not set
 CONFIG_BITREVERSE=y
 CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
 CONFIG_CPU_BIG_ENDIAN=y
@@ -20,9 +17,9 @@ CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_CPU_HAS_SYNC=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_MIPS64_R1 is not set
 # CONFIG_CPU_MIPS64_R2 is not set
 CONFIG_CPU_MIPSR1=y
@@ -48,7 +45,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
@@ -56,22 +52,16 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-# CONFIG_HERMES is not set
-# CONFIG_HOSTAP is not set
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
-# CONFIG_I2C is not set
 # CONFIG_IDE is not set
 CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_MACH_VR41XX is not set
-CONFIG_MIPS=y
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_COBALT is not set
@@ -84,10 +74,10 @@ CONFIG_MIPS=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_MTX1 is not set
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_PB1000 is not set
 # CONFIG_MIPS_PB1100 is not set
 # CONFIG_MIPS_PB1200 is not set
@@ -97,11 +87,12 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_MIPS_XXS1500 is not set
+CONFIG_MIPS=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MOMENCO_OCELOT is not set
 CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
 # CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
 # CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
@@ -113,13 +104,13 @@ CONFIG_MTD_CFI_ADV_OPTIONS=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+CONFIG_MTD_REDBOOT_PARTS=y
 # CONFIG_NET_PCI is not set
 CONFIG_NET_SCH_FIFO=y
 # CONFIG_NET_VENDOR_3COM is not set
@@ -128,7 +119,6 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_PNPACPI is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_PRISM54 is not set
 # CONFIG_RTC is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_SERIAL_8250 is not set
@@ -154,4 +144,3 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB is not set