X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/00b3e970afc0ee583ed6f85c50d26b3b947b06b1..95d3699b736c21cb23b27589f2138cb396134db8:/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c index 5087794f2..d6c684309 100644 --- a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c +++ b/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c @@ -1,7 +1,7 @@ /* * NAND flash driver for the MikroTik RouterBoard 4xx series * - * Copyright (C) 2008 Gabor Juhos + * Copyright (C) 2008-2011 Gabor Juhos * Copyright (C) 2008 Imre Kaloz * * This file was based on the driver for Linux 2.6.22 published by @@ -20,51 +20,19 @@ #include #include #include +#include #include +#include #define DRV_NAME "rb4xx-nand" -#define DRV_VERSION "0.1.10" +#define DRV_VERSION "0.2.0" #define DRV_DESC "NAND flash driver for RouterBoard 4xx series" -#define USE_FAST_READ 1 -#define USE_FAST_WRITE 1 -#undef RB4XX_NAND_DEBUG - -#ifdef RB4XX_NAND_DEBUG -#define DBG(fmt, arg...) printk(KERN_DEBUG DRV_NAME ": " fmt, ## arg) -#else -#define DBG(fmt, arg...) do {} while (0) -#endif - -#define RB4XX_NAND_GPIO_RDY 5 -#define RB4XX_FLASH_HZ 33333334 -#define RB4XX_NAND_HZ 33333334 - -#define SPI_CTRL_FASTEST 0x40 -#define SPI_CTRL_SAFE 0x43 /* 25 MHz for AHB 200 MHz */ -#define SBIT_IOC_BASE SPI_IOC_CS1 -#define SBIT_IOC_DO_SHIFT 0 -#define SBIT_IOC_DO (1u << SBIT_IOC_DO_SHIFT) -#define SBIT_IOC_DO2_SHIFT 18 -#define SBIT_IOC_DO2 (1u << SBIT_IOC_DO2_SHIFT) - -#define CPLD_CMD_WRITE_MULT 0x08 /* send cmd, n x send data, read data */ -#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */ -#define CPLD_CMD_READ_MULT 0x0a /* send cmd, send idle, n x read data */ -#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */ - -#define CFG_BIT_nCE 0x80 -#define CFG_BIT_CLE 0x40 -#define CFG_BIT_ALE 0x20 -#define CFG_BIT_FAN 0x10 -#define CFG_BIT_nLED4 0x08 -#define CFG_BIT_nLED3 0x04 -#define CFG_BIT_nLED2 0x02 -#define CFG_BIT_nLED1 0x01 - -#define CFG_BIT_nLEDS \ - (CFG_BIT_nLED1 | CFG_BIT_nLED2 | CFG_BIT_nLED3 | CFG_BIT_nLED4) +#define RB4XX_NAND_GPIO_READY 5 +#define RB4XX_NAND_GPIO_ALE 37 +#define RB4XX_NAND_GPIO_CLE 38 +#define RB4XX_NAND_GPIO_NCE 39 struct rb4xx_nand_info { struct nand_chip chip; @@ -92,7 +60,7 @@ static struct mtd_partition rb4xx_nand_partitions[] = { { .name = "kernel", .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), + .size = (6 * 1024 * 1024) - (256 * 1024), }, { .name = "rootfs", @@ -101,318 +69,141 @@ static struct mtd_partition rb4xx_nand_partitions[] = { }, }; -#if USE_FAST_READ -#define SPI_NDATA_BASE 0x00800000 -static unsigned spi_ctrl_fread = SPI_CTRL_SAFE; -static unsigned spi_ctrl_flash = SPI_CTRL_SAFE; -extern unsigned mips_hpt_frequency; -#endif - -static inline unsigned rb4xx_spi_rreg(unsigned r) -{ - return __raw_readl((void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r)); -} - -static inline void rb4xx_spi_wreg(unsigned r, unsigned v) -{ - __raw_writel(v, (void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r)); -} - -static inline void do_spi_clk(int bit) -{ - unsigned bval = SBIT_IOC_BASE | (bit & 1); - - rb4xx_spi_wreg(SPI_REG_IOC, bval); - rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK); -} - -static void do_spi_byte(uint8_t byte) +static int rb4xx_nand_dev_ready(struct mtd_info *mtd) { - do_spi_clk(byte >> 7); - do_spi_clk(byte >> 6); - do_spi_clk(byte >> 5); - do_spi_clk(byte >> 4); - do_spi_clk(byte >> 3); - do_spi_clk(byte >> 2); - do_spi_clk(byte >> 1); - do_spi_clk(byte); - - DBG("spi_byte sent 0x%02x got 0x%x\n", - byte, rb4xx_spi_rreg(SPI_REG_RDS)); + return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY); } -#if USE_FAST_WRITE -static inline void do_spi_clk_fast(int bit1, int bit2) +static void rb4xx_nand_write_cmd(unsigned char cmd) { - unsigned bval = (SBIT_IOC_BASE | - ((bit1 << SBIT_IOC_DO_SHIFT) & SBIT_IOC_DO) | - ((bit2 << SBIT_IOC_DO2_SHIFT) & SBIT_IOC_DO2)); + unsigned char data = cmd; + int err; - rb4xx_spi_wreg(SPI_REG_IOC, bval); - rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK); + err = rb4xx_cpld_write(&data, 1); + if (err) + pr_err("rb4xx_nand: write cmd failed, err=%d\n", err); } -static inline void do_spi_byte_fast(uint8_t byte) +static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - do_spi_clk_fast(byte >> 7, byte >> 6); - do_spi_clk_fast(byte >> 5, byte >> 4); - do_spi_clk_fast(byte >> 3, byte >> 2); - do_spi_clk_fast(byte >> 1, byte >> 0); + if (ctrl & NAND_CTRL_CHANGE) { + gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE, + (ctrl & NAND_CLE) ? 1 : 0); + gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE, + (ctrl & NAND_ALE) ? 1 : 0); + gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE, + (ctrl & NAND_NCE) ? 0 : 1); + } - DBG("spi_byte_fast sent 0x%02x got 0x%x\n", - byte, rb4xx_spi_rreg(SPI_REG_RDS)); -} -#else -static inline void do_spi_byte_fast(uint8_t byte) -{ - do_spi_byte(byte); + if (cmd != NAND_CMD_NONE) + rb4xx_nand_write_cmd(cmd); } -#endif /* USE_FAST_WRITE */ -static int do_spi_cmd(unsigned cmd, unsigned sendCnt, const uint8_t *sendData, - unsigned recvCnt, uint8_t *recvData, - const uint8_t *verifyData, int fastWrite) +static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd) { - unsigned i; - - DBG("SPI cmd 0x%x send %u recv %u\n", cmd, sendCnt, recvCnt); - - rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO); - rb4xx_spi_wreg(SPI_REG_CTRL, SPI_CTRL_FASTEST); + unsigned char data = 0; + int err; - do_spi_byte(cmd); -#if 0 - if (cmd == CPLD_CMD_READ_FAST) { - do_spi_byte(0x80); - do_spi_byte(0); - do_spi_byte(0); - } -#endif - for (i = 0; i < sendCnt; ++i) { - if (fastWrite) - do_spi_byte_fast(sendData[i]); - else - do_spi_byte(sendData[i]); + err = rb4xx_cpld_read(&data, NULL, 1); + if (err) { + pr_err("rb4xx_nand: read data failed, err=%d\n", err); + data = 0xff; } - for (i = 0; i < recvCnt; ++i) { - if (fastWrite) - do_spi_byte_fast(0); - else - do_spi_byte(0); - - if (recvData) { - recvData[i] = rb4xx_spi_rreg(SPI_REG_RDS) & 0xff; - } else if (verifyData) { - if (verifyData[i] != (rb4xx_spi_rreg(SPI_REG_RDS) - & 0xff)) - break; - } - } - - rb4xx_spi_wreg(SPI_REG_IOC, SBIT_IOC_BASE | SPI_IOC_CS0); - rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_flash); - rb4xx_spi_wreg(SPI_REG_FS, 0); - - return i == recvCnt; + return data; } -static int got_write = 1; - -static void rb4xx_nand_write_data(const uint8_t *byte, unsigned cnt) +static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf, + int len) { - do_spi_cmd(CPLD_CMD_WRITE_MULT, cnt, byte, 1, NULL, NULL, 1); - got_write = 1; -} + int err; -static void rb4xx_nand_write_byte(uint8_t byte) -{ - rb4xx_nand_write_data(&byte, 1); + err = rb4xx_cpld_write(buf, len); + if (err) + pr_err("rb4xx_nand: write buf failed, err=%d\n", err); } -#if USE_FAST_READ -static uint8_t *rb4xx_nand_read_getaddr(unsigned cnt) +static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf, + int len) { - static unsigned nboffset = 0x100000; - unsigned addr; - - if (got_write) { - nboffset = (nboffset + 31) & ~31; - if (nboffset >= 0x100000) /* 1MB */ - nboffset = 0; - - got_write = 0; - rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO); - rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_fread); - rb4xx_spi_wreg(SPI_REG_FS, 0); - } + int err; - addr = KSEG1ADDR(AR71XX_SPI_BASE + SPI_NDATA_BASE) + nboffset; - DBG("rb4xx_nand_read_getaddr 0x%x cnt 0x%x\n", addr, cnt); - - nboffset += cnt; - return (uint8_t *)addr; + err = rb4xx_cpld_read(buf, NULL, len); + if (err) + pr_err("rb4xx_nand: read buf failed, err=%d\n", err); } -static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt) +static int __init rb4xx_nand_probe(struct platform_device *pdev) { - unsigned size32 = cnt & ~31; - unsigned remain = cnt & 31; + struct rb4xx_nand_info *info; + int ret; - if (size32) { - uint8_t *addr = rb4xx_nand_read_getaddr(size32); - memcpy(buf, (void *)addr, size32); - } + printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); - if (remain) { - do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain, - buf + size32, NULL, 0); + ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY"); + if (ret) { + dev_err(&pdev->dev, "unable to request gpio %d\n", + RB4XX_NAND_GPIO_READY); + goto err; } -} - -static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt) -{ - unsigned size32 = cnt & ~31; - unsigned remain = cnt & 31; - if (size32) { - uint8_t *addr = rb4xx_nand_read_getaddr(size32); - if (memcmp(buf, (void *)addr, size32) != 0) - return 0; + ret = gpio_direction_input(RB4XX_NAND_GPIO_READY); + if (ret) { + dev_err(&pdev->dev, "unable to set input mode on gpio %d\n", + RB4XX_NAND_GPIO_READY); + goto err_free_gpio_ready; } - if (remain) { - return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain, - NULL, buf + size32, 0); + ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE"); + if (ret) { + dev_err(&pdev->dev, "unable to request gpio %d\n", + RB4XX_NAND_GPIO_ALE); + goto err_free_gpio_ready; } - return 1; -} -#else /* USE_FAST_READ */ -static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt) -{ - do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, buf, NULL, 0); -} - -static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt) -{ - return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, NULL, buf, 0); -} -#endif /* USE_FAST_READ */ - -static void rb4xx_nand_write_cfg(uint8_t byte) -{ - do_spi_cmd(CPLD_CMD_WRITE_CFG, 1, &byte, 0, NULL, NULL, 0); - got_write = 1; -} - -static int rb4xx_nand_dev_ready(struct mtd_info *mtd) -{ - return gpio_get_value(RB4XX_NAND_GPIO_RDY); -} - -static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - uint8_t cfg = CFG_BIT_nLEDS; - cfg |= (ctrl & NAND_CLE) ? CFG_BIT_CLE : 0; - cfg |= (ctrl & NAND_ALE) ? CFG_BIT_ALE : 0; - cfg |= (ctrl & NAND_NCE) ? 0 : CFG_BIT_nCE; - - rb4xx_nand_write_cfg(cfg); + ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0); + if (ret) { + dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", + RB4XX_NAND_GPIO_ALE); + goto err_free_gpio_ale; } - if (cmd != NAND_CMD_NONE) - rb4xx_nand_write_byte(cmd); -} - -static uint8_t rb4xx_nand_read_byte(struct mtd_info *mtd) -{ - uint8_t byte = 0; - - rb4xx_nand_read_data(&byte, 1); - return byte; -} - -static void rb4xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, - int len) -{ - rb4xx_nand_write_data(buf, len); -} - -static void rb4xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, - int len) -{ - rb4xx_nand_read_data(buf, len); -} - -static int rb4xx_nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, - int len) -{ - if (!rb4xx_nand_verify_data(buf, len)) - return -EFAULT; - - return 0; -} - -static unsigned get_spi_ctrl(unsigned hz_max, const char *name) -{ - unsigned div; - - div = (ar71xx_ahb_freq - 1) / (2 * hz_max); - /* - * CPU has a bug at (div == 0) - first bit read is random - */ - if (div == 0) - ++div; - - if (name) { - unsigned ahb_khz = (ar71xx_ahb_freq + 500) / 1000; - unsigned div_real = 2 * (div + 1); - printk(KERN_INFO "%s SPI clock %u kHz (AHB %u kHz / %u)\n", - name, - ahb_khz / div_real, - ahb_khz, div_real); + ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE"); + if (ret) { + dev_err(&pdev->dev, "unable to request gpio %d\n", + RB4XX_NAND_GPIO_CLE); + goto err_free_gpio_ale; } - return SPI_CTRL_FASTEST + div; -} - -static int __init rb4xx_nand_probe(struct platform_device *pdev) -{ - struct rb4xx_nand_info *info; - int ret; - - printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); + ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0); + if (ret) { + dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", + RB4XX_NAND_GPIO_CLE); + goto err_free_gpio_cle; + } - ret = gpio_request(RB4XX_NAND_GPIO_RDY, "NAND RDY"); + ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE"); if (ret) { - printk(KERN_ERR "rb4xx-nand: gpio request failed\n"); - return ret; + dev_err(&pdev->dev, "unable to request gpio %d\n", + RB4XX_NAND_GPIO_NCE); + goto err_free_gpio_cle; } - ret = gpio_direction_input(RB4XX_NAND_GPIO_RDY); + ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1); if (ret) { - printk(KERN_ERR "rb4xx-nand: unable to set input mode " - "on gpio%d\n", RB4XX_NAND_GPIO_RDY); - goto err_free_gpio; + dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", + RB4XX_NAND_GPIO_ALE); + goto err_free_gpio_nce; } info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) { - printk(KERN_ERR "rb4xx-nand: no memory for private data\n"); + dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n"); ret = -ENOMEM; - goto err_free_gpio; + goto err_free_gpio_nce; } -#if USE_FAST_READ - spi_ctrl_fread = get_spi_ctrl(RB4XX_NAND_HZ, "NAND"); -#endif - spi_ctrl_flash = get_spi_ctrl(RB4XX_FLASH_HZ, "FLASH"); - - rb4xx_nand_write_cfg(CFG_BIT_nLEDS | CFG_BIT_nCE); - info->chip.priv = &info; info->mtd.priv = &info->chip; info->mtd.owner = THIS_MODULE; @@ -422,7 +213,9 @@ static int __init rb4xx_nand_probe(struct platform_device *pdev) info->chip.read_byte = rb4xx_nand_read_byte; info->chip.write_buf = rb4xx_nand_write_buf; info->chip.read_buf = rb4xx_nand_read_buf; +#if 0 info->chip.verify_buf = rb4xx_nand_verify_buf; +#endif info->chip.chip_delay = 25; info->chip.ecc.mode = NAND_ECC_SOFT; @@ -462,8 +255,15 @@ err_set_drvdata: platform_set_drvdata(pdev, NULL); err_free_info: kfree(info); -err_free_gpio: - gpio_free(RB4XX_NAND_GPIO_RDY); +err_free_gpio_nce: + gpio_free(RB4XX_NAND_GPIO_NCE); +err_free_gpio_cle: + gpio_free(RB4XX_NAND_GPIO_CLE); +err_free_gpio_ale: + gpio_free(RB4XX_NAND_GPIO_ALE); +err_free_gpio_ready: + gpio_free(RB4XX_NAND_GPIO_READY); +err: return ret; } @@ -474,6 +274,10 @@ static int __devexit rb4xx_nand_remove(struct platform_device *pdev) nand_release(&info->mtd); platform_set_drvdata(pdev, NULL); kfree(info); + gpio_free(RB4XX_NAND_GPIO_NCE); + gpio_free(RB4XX_NAND_GPIO_CLE); + gpio_free(RB4XX_NAND_GPIO_ALE); + gpio_free(RB4XX_NAND_GPIO_READY); return 0; }