X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/022e126a6b8c27220f3f0ec2475d1610f38ec713..f17e916f8efe0fa1ea0607269286dbe975340986:/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch

diff --git a/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch
index 102342322..1951ff9ac 100644
--- a/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/configs/ixp4xx_defconfig
 +++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -155,6 +155,7 @@
+@@ -155,6 +155,7 @@ CONFIG_MACH_AVILA=y
  CONFIG_MACH_LOFT=y
  CONFIG_ARCH_ADI_COYOTE=y
  CONFIG_MACH_GATEWAY7001=y
@@ -10,7 +10,7 @@
  CONFIG_MACH_IXDPG425=y
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@
+@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
  	  7001 Access Point. For more information on this platform,
  	  see http://openwrt.org
  
@@ -27,7 +27,7 @@
  	select PCI
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@
+@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-p
  obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
  obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
  obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
@@ -35,7 +35,7 @@
  obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
  obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
  
-@@ -28,6 +29,7 @@
+@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.
  obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
  obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
  obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
@@ -112,7 +112,7 @@
 +subsys_initcall(wg302v1_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,126 @@
+@@ -0,0 +1,142 @@
 +/*
 + * arch/arm/mach-ixp4xx/wg302v1-setup.c
 + *
@@ -163,10 +163,17 @@
 +	.resource	= &wg302v1_flash_resource,
 +};
 +
-+static struct resource wg302v1_uart_resource = {
-+	.start	= IXP4XX_UART1_BASE_PHYS,
-+	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+	.flags	= IORESOURCE_MEM,
++static struct resource wg302v1_uart_resources[] = {
++	{
++		.start	= IXP4XX_UART1_BASE_PHYS,
++		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.start	= IXP4XX_UART2_BASE_PHYS,
++		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags	= IORESOURCE_MEM,
++	}
 +};
 +
 +static struct plat_serial8250_port wg302v1_uart_data[] = {
@@ -179,6 +186,15 @@
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
 +	{ },
 +};
 +
@@ -188,8 +204,8 @@
 +	.dev			= {
 +		.platform_data	= wg302v1_uart_data,
 +	},
-+	.num_resources	= 1,
-+	.resource	= &wg302v1_uart_resource,
++	.num_resources	= 2,
++	.resource	= wg302v1_uart_resources,
 +};
 +
 +static struct eth_plat_info wg302v1_plat_eth[] = {