X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/08d86463d816ce8bab3aee46d7559d51f94e65ae..6b20955cca6fb3518c4d77afb68938749fdf3201:/package/comgt/files/3g.sh

diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
index 500269ce3..616beec4c 100644
--- a/package/comgt/files/3g.sh
+++ b/package/comgt/files/3g.sh
@@ -1,14 +1,15 @@
 set_3g_led() {
-	grep WRT54G3G /proc/diag/model >/dev/null || return 0
+	# set on WRT54G3G only
+	[ -f /proc/diag/model ] || return 0
+	grep -q "WRT54G3G" /proc/diag/model >/dev/null || return 0
 	echo "$1" > /proc/diag/led/3g_green
 	echo "$2" > /proc/diag/led/3g_blue
+	grep -q "WRT54G3G$" /proc/diag/model >/dev/null || return 0
 	echo "$3" > /proc/diag/led/3g_blink
 }
 
 scan_3g() {
 	local device
-
-	scan_ppp "$@"
 	config_get device "$1" device
 
 	# try to figure out the device if it's invalid
@@ -22,6 +23,7 @@ scan_3g() {
 	}
 
 	# enable 3G with the 3G button by default
+	local button
 	config_get button "$1" button
 	[ -z "$button" ] && {
 		config_set "$1" button 1
@@ -29,6 +31,7 @@ scan_3g() {
 }
 
 stop_interface_3g() {
+	stop_interface_ppp "$1"
 	set_3g_led 0 0 0
 	killall gcom >/dev/null 2>/dev/null
 }
@@ -37,17 +40,33 @@ setup_interface_3g() {
 	local iface="$1"
 	local config="$2"
 	local chat="/etc/chatscripts/3g.chat"
-	
+
+	local device
 	config_get device "$config" device
 
+	local maxwait
+	config_get maxwait "$config" maxwait
+	maxwait=${maxwait:-20}
+	while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
+		maxwait=$(($maxwait - 1))
+		sleep 1
+	done
+
 	for module in slhc ppp_generic ppp_async; do
 		/sbin/insmod $module 2>&- >&-
 	done
 
-	config_get apn "$cfg" apn
-	config_get service "$cfg" service
-	config_get pincode "$cfg" pincode
-	config_get mtu "$cfg" mtu
+	local apn
+	config_get apn "$config" apn
+
+	local service
+	config_get service "$config" service
+
+	local pincode
+	config_get pincode "$config" pincode
+
+	local mtu
+	config_get mtu "$config" mtu
 
 	set_3g_led 1 0 1
 
@@ -55,14 +74,15 @@ setup_interface_3g() {
 	case "$service" in
 		cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
 	*)
-		if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
+		cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
+		if echo "$cardinfo" | grep Novatel; then
 			case "$service" in
 				umts_only) CODE=2;;
 				gprs_only) CODE=1;;
 				*) CODE=0;;
 			esac
 			mode="AT\$NWRAT=${CODE},2"
-		else
+		elif echo "$cardinfo" | grep Option; then
 			case "$service" in
 				umts_only) CODE=1;;
 				gprs_only) CODE=0;;
@@ -70,17 +90,22 @@ setup_interface_3g() {
 			esac
 			mode="AT_OPSYS=${CODE}"
 		fi
-		
-		PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-			echo "$cfg(3g): Failed to set the PIN code."
-			set_3g_led 0 0 0
-			return 1
+		# Don't assume Option to be default as it breaks with Huawei Cards/Sticks
+
+		test -z "$pincode" || {
+			PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+				echo "$config(3g): Failed to set the PIN code."
+				set_3g_led 0 0 0
+				return 1
+			}
+		}
+		test -z "$mode" || {
+			MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
 		}
-		MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
 	esac
 	set_3g_led 1 0 0
 
-	config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -f $chat"
+	config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
 	start_pppd "$config" \
 		noaccomp \
 		nopcomp \