X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/0bf84185a31085ee12512035da0a86536b7f9b1b..097b27145d8b0e148636abd74ff80b8b92e25c05:/package/comgt/files/3g.sh?ds=sidebyside

diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
index 2859a1bda..b27e90e50 100644
--- a/package/comgt/files/3g.sh
+++ b/package/comgt/files/3g.sh
@@ -13,7 +13,7 @@ scan_3g() {
 
 	# try to figure out the device if it's invalid
 	[ -n "$device" -a -e "$device" ] || {
-		for device in /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
+		for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
 			[ -e "$device" ] && {
 				config_set "$1" device "$device"
 				break
@@ -39,15 +39,21 @@ setup_interface_3g() {
 	local chat="/etc/chatscripts/3g.chat"
 	
 	config_get device "$config" device
+	config_get maxwait "$config" maxwait
+	maxwait=${maxwait:-20}
+	while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
+		maxwait=$(($maxwait - 1))
+		sleep 1
+	done
 
 	for module in slhc ppp_generic ppp_async; do
 		/sbin/insmod $module 2>&- >&-
 	done
 
-	config_get apn "$cfg" apn
-	config_get service "$cfg" service
-	config_get pincode "$cfg" pincode
-	config_get mtu "$cfg" mtu
+	config_get apn "$config" apn
+	config_get service "$config" service
+	config_get pincode "$config" pincode
+	config_get mtu "$config" mtu
 
 	set_3g_led 1 0 1
 
@@ -55,14 +61,15 @@ setup_interface_3g() {
 	case "$service" in
 		cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
 	*)
-		if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
+		cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
+		if echo "$cardinfo" | grep Novatel; then
 			case "$service" in
 				umts_only) CODE=2;;
 				gprs_only) CODE=1;;
 				*) CODE=0;;
 			esac
 			mode="AT\$NWRAT=${CODE},2"
-		else
+		elif echo "$cardinfo" | grep Option; then
 			case "$service" in
 				umts_only) CODE=1;;
 				gprs_only) CODE=0;;
@@ -70,17 +77,20 @@ setup_interface_3g() {
 			esac
 			mode="AT_OPSYS=${CODE}"
 		fi
+		# Don't assume Option to be default as it breaks with Huawei Cards/Sticks
 		
 		PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-			echo "$cfg(3g): Failed to set the PIN code."
+			echo "$config(3g): Failed to set the PIN code."
 			set_3g_led 0 0 0
 			return 1
 		}
-		MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+		test -z "$mode" || {
+			MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+		}
 	esac
 	set_3g_led 1 0 0
 
-	config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -f $chat"
+	config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
 	start_pppd "$config" \
 		noaccomp \
 		nopcomp \