X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/0d15d1fe3ac822cd329492b1f9854c2c36fdc7ae..10b1167329d8ebb966e0ebc92e445f66fe30f02f:/target/linux/atheros/files/drivers/net/ar2313/ar2313.c?ds=inline diff --git a/target/linux/atheros/files/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c index b6e2dcab3..985af024c 100644 --- a/target/linux/atheros/files/drivers/net/ar2313/ar2313.c +++ b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c @@ -14,7 +14,7 @@ * (at your option) any later version. * * Additional credits: - * This code is taken from John Taylor's Sibyte driver and then + * This code is taken from John Taylor's Sibyte driver and then * modified for the AR2313. */ @@ -134,7 +134,7 @@ #define CRC_LEN 4 #define RX_OFFSET 2 -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) #define VLAN_HDR 4 #else #define VLAN_HDR 0 @@ -186,10 +186,9 @@ int __init ar2313_probe(struct platform_device *pdev) return -ENOMEM; } - SET_MODULE_OWNER(dev); platform_set_drvdata(pdev, dev); - sp = dev->priv; + sp = netdev_priv(dev); sp->dev = dev; sp->cfg = pdev->dev.platform_data; @@ -212,7 +211,6 @@ int __init ar2313_probe(struct platform_device *pdev) dev->stop = &ar2313_close; dev->hard_start_xmit = &ar2313_start_xmit; - dev->get_stats = &ar2313_get_stats; dev->set_multicast_list = &ar2313_multicast_list; #ifdef TX_TIMEOUT dev->tx_timeout = ar2313_tx_timeout; @@ -221,7 +219,7 @@ int __init ar2313_probe(struct platform_device *pdev) dev->do_ioctl = &ar2313_ioctl; // SAMEER: do we need this? - dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA; + dev->features |= NETIF_F_HIGHDMA; tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev); tasklet_disable(&sp->rx_tasklet); @@ -233,8 +231,8 @@ int __init ar2313_probe(struct platform_device *pdev) return (-ENXIO); } - /* - * When there's only one MAC, PHY regs are typically on ENET0, + /* + * When there's only one MAC, PHY regs are typically on ENET0, * even though the MAC might be on ENET1. * Needto remap PHY regs separately in this case */ @@ -271,7 +269,7 @@ int __init ar2313_probe(struct platform_device *pdev) sp->board_idx = BOARD_IDX_STATIC; if (ar2313_init(dev)) { - /* + /* * ar2313_init() calls ar2313_init_cleanup() on error. */ kfree(dev); @@ -296,7 +294,7 @@ int __init ar2313_probe(struct platform_device *pdev) sp->mii_bus.id = 0; sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); *sp->mii_bus.irq = PHY_POLL; - + mdiobus_register(&sp->mii_bus); if (mdiobus_probe(dev) != 0) { @@ -309,7 +307,7 @@ int __init ar2313_probe(struct platform_device *pdev) /* start link poll timer */ ar2313_setup_timer(dev); } - + return 0; } @@ -317,7 +315,7 @@ int __init ar2313_probe(struct platform_device *pdev) static void ar2313_dump_regs(struct net_device *dev) { unsigned int *ptr, i; - struct ar2313_private *sp = (struct ar2313_private *) dev->priv; + struct ar2313_private *sp = netdev_priv(dev); ptr = (unsigned int *) sp->eth_regs; for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int)); @@ -346,7 +344,7 @@ static void ar2313_dump_regs(struct net_device *dev) #ifdef TX_TIMEOUT static void ar2313_tx_timeout(struct net_device *dev) { - struct ar2313_private *sp = (struct ar2313_private *) dev->priv; + struct ar2313_private *sp = netdev_priv(dev); unsigned long flags; #if DEBUG_TX @@ -380,11 +378,11 @@ static void printMcList(struct net_device *dev) */ static void ar2313_multicast_list(struct net_device *dev) { - /* - * Always listen to broadcasts and - * treat IFF bits independently + /* + * Always listen to broadcasts and + * treat IFF bits independently */ - struct ar2313_private *sp = (struct ar2313_private *) dev->priv; + struct ar2313_private *sp = netdev_priv(dev); unsigned int recognise; recognise = sp->eth_regs->mac_control; @@ -419,9 +417,9 @@ static void ar2313_multicast_list(struct net_device *dev) static void rx_tasklet_cleanup(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); - /* + /* * Tasklet may be scheduled. Need to get it removed from the list * since we're about to free the struct. */ @@ -443,7 +441,7 @@ static int __exit ar2313_remove(struct platform_device *pdev) /* - * Restart the AR2313 ethernet controller. + * Restart the AR2313 ethernet controller. */ static int ar2313_restart(struct net_device *dev) { @@ -484,7 +482,7 @@ module_exit(ar2313_module_cleanup); static void ar2313_free_descriptors(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); if (sp->rx_ring != NULL) { kfree((void *) KSEG0ADDR(sp->rx_ring)); sp->rx_ring = NULL; @@ -495,7 +493,7 @@ static void ar2313_free_descriptors(struct net_device *dev) static int ar2313_allocate_descriptors(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); int size; int j; ar2313_descr_t *space; @@ -546,7 +544,7 @@ static int ar2313_allocate_descriptors(struct net_device *dev) */ static void ar2313_init_cleanup(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); struct sk_buff *skb; int j; @@ -584,7 +582,7 @@ static void ar2313_init_cleanup(struct net_device *dev) static int ar2313_setup_timer(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); init_timer(&sp->link_timer); @@ -600,14 +598,14 @@ static int ar2313_setup_timer(struct net_device *dev) static void ar2313_link_timer_fn(unsigned long data) { struct net_device *dev = (struct net_device *) data; - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); // see if the link status changed // This was needed to make sure we set the PHY to the // autonegotiated value of half or full duplex. ar2313_check_link(dev); - // Loop faster when we don't have link. + // Loop faster when we don't have link. // This was needed to speed up the AP bootstrap time. if (sp->link == 0) { mod_timer(&sp->link_timer, jiffies + HZ / 2); @@ -618,7 +616,7 @@ static void ar2313_link_timer_fn(unsigned long data) static void ar2313_check_link(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); u16 phyData; phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR); @@ -664,7 +662,7 @@ static void ar2313_check_link(struct net_device *dev) static int ar2313_reset_reg(struct net_device *dev) { - struct ar2313_private *sp = (struct ar2313_private *) dev->priv; + struct ar2313_private *sp = netdev_priv(dev); unsigned int ethsal, ethsah; unsigned int flags; @@ -726,10 +724,10 @@ static int ar2313_reset_reg(struct net_device *dev) static int ar2313_init(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); int ecode = 0; - /* + /* * Allocate descriptors */ if (ar2313_allocate_descriptors(dev)) { @@ -739,7 +737,7 @@ static int ar2313_init(struct net_device *dev) goto init_error; } - /* + /* * Get the memory for the skb rings. */ if (sp->rx_skb == NULL) { @@ -768,7 +766,7 @@ static int ar2313_init(struct net_device *dev) } memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); - /* + /* * Set tx_csm before we start receiving interrupts, otherwise * the interrupt handler might think it is supposed to process * tx ints before we are up and running, which may cause a null @@ -779,23 +777,23 @@ static int ar2313_init(struct net_device *dev) sp->tx_prd = 0; sp->tx_csm = 0; - /* + /* * Zero the stats before starting the interface */ - memset(&sp->stats, 0, sizeof(sp->stats)); + memset(&dev->stats, 0, sizeof(dev->stats)); - /* + /* * We load the ring here as there seem to be no way to tell the * firmware to wipe the ring without re-initializing it. */ ar2313_load_rx_ring(dev, RX_RING_SIZE); - /* + /* * Init hardware */ ar2313_reset_reg(dev); - /* + /* * Get the IRQ */ ecode = @@ -828,7 +826,7 @@ static int ar2313_init(struct net_device *dev) static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs) { - struct ar2313_private *sp = ((struct net_device *) dev)->priv; + struct ar2313_private *sp = netdev_priv(dev); short i, idx; idx = sp->rx_skbprd; @@ -853,7 +851,7 @@ static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs) // partha: create additional room in the front for tx pkt capture skb_reserve(skb, 32); - /* + /* * Make sure IP header starts on a fresh cache line. */ skb->dev = dev; @@ -890,7 +888,7 @@ static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs) static int ar2313_rx_int(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); struct sk_buff *skb, *skb_new; ar2313_descr_t *rxdesc; unsigned int status; @@ -900,7 +898,7 @@ static int ar2313_rx_int(struct net_device *dev) idx = sp->cur_rx; - /* process at most the entire ring and then wait for another interrupt + /* process at most the entire ring and then wait for another interrupt */ while (1) { @@ -929,20 +927,20 @@ static int ar2313_rx_int(struct net_device *dev) #if DEBUG_RX printk("%s: rx ERROR %08x\n", __FUNCTION__, status); #endif - sp->stats.rx_errors++; - sp->stats.rx_dropped++; + dev->stats.rx_errors++; + dev->stats.rx_dropped++; /* add statistics counters */ if (status & DMA_RX_ERR_CRC) - sp->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; if (status & DMA_RX_ERR_COL) - sp->stats.rx_over_errors++; + dev->stats.rx_over_errors++; if (status & DMA_RX_ERR_LENGTH) - sp->stats.rx_length_errors++; + dev->stats.rx_length_errors++; if (status & DMA_RX_ERR_RUNT) - sp->stats.rx_over_errors++; + dev->stats.rx_over_errors++; if (status & DMA_RX_ERR_DESC) - sp->stats.rx_over_errors++; + dev->stats.rx_over_errors++; } else { /* alloc new buffer. */ @@ -954,7 +952,7 @@ static int ar2313_rx_int(struct net_device *dev) skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); - sp->stats.rx_bytes += skb->len; + dev->stats.rx_bytes += skb->len; skb->protocol = eth_type_trans(skb, dev); /* pass the packet to upper layers */ netif_rx(skb); @@ -965,10 +963,10 @@ static int ar2313_rx_int(struct net_device *dev) /* reset descriptor's curr_addr */ rxdesc->addr = virt_to_phys(skb_new->data); - sp->stats.rx_packets++; + dev->stats.rx_packets++; sp->rx_skb[idx] = skb_new; } else { - sp->stats.rx_dropped++; + dev->stats.rx_dropped++; } } @@ -987,7 +985,7 @@ static int ar2313_rx_int(struct net_device *dev) static void ar2313_tx_int(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); u32 idx; struct sk_buff *skb; ar2313_descr_t *txdesc; @@ -1017,27 +1015,27 @@ static void ar2313_tx_int(struct net_device *dev) txdesc->status = 0; if (status & DMA_TX_ERROR) { - sp->stats.tx_errors++; - sp->stats.tx_dropped++; + dev->stats.tx_errors++; + dev->stats.tx_dropped++; if (status & DMA_TX_ERR_UNDER) - sp->stats.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; if (status & DMA_TX_ERR_HB) - sp->stats.tx_heartbeat_errors++; + dev->stats.tx_heartbeat_errors++; if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) - sp->stats.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; if (status & (DMA_TX_ERR_LATE | DMA_TX_ERR_COL | DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) - sp->stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; } else { /* transmit OK */ - sp->stats.tx_packets++; + dev->stats.tx_packets++; } skb = sp->tx_skb[idx]; sp->tx_skb[idx] = NULL; idx = DSC_NEXT(idx); - sp->stats.tx_bytes += skb->len; + dev->stats.tx_bytes += skb->len; dev_kfree_skb_irq(skb); } @@ -1050,7 +1048,7 @@ static void ar2313_tx_int(struct net_device *dev) static void rx_tasklet_func(unsigned long data) { struct net_device *dev = (struct net_device *) data; - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); if (sp->unloading) { return; @@ -1068,7 +1066,7 @@ static void rx_tasklet_func(unsigned long data) static void rx_schedule(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; @@ -1078,11 +1076,11 @@ static void rx_schedule(struct net_device *dev) static irqreturn_t ar2313_interrupt(int irq, void *dev_id) { struct net_device *dev = (struct net_device *) dev_id; - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); unsigned int status, enabled; /* clear interrupt */ - /* + /* * Don't clear RI bit if currently disabled. */ status = sp->dma_regs->status; @@ -1091,7 +1089,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id) if (status & DMA_STATUS_NIS) { /* normal status */ - /* + /* * Don't schedule rx processing if interrupt * is already disabled. */ @@ -1121,9 +1119,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id) static int ar2313_open(struct net_device *dev) { - struct ar2313_private *sp; - - sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); dev->mtu = 1500; netif_start_queue(dev); @@ -1135,7 +1131,7 @@ static int ar2313_open(struct net_device *dev) static void ar2313_halt(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); int j; tasklet_disable(&sp->rx_tasklet); @@ -1179,12 +1175,12 @@ static void ar2313_halt(struct net_device *dev) static int ar2313_close(struct net_device *dev) { #if 0 - /* + /* * Disable interrupts */ disable_irq(dev->irq); - /* + /* * Without (or before) releasing irq and stopping hardware, this * is an absolute non-sense, by the way. It will be reset instantly * by the first irq. @@ -1203,7 +1199,7 @@ static int ar2313_close(struct net_device *dev) static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev) { - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); ar2313_descr_t *td; u32 idx; @@ -1215,7 +1211,7 @@ static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev) printk("%s: No space left to Tx\n", __FUNCTION__); #endif /* free skbuf and lie to the caller that we sent it out */ - sp->stats.tx_dropped++; + dev->stats.tx_dropped++; dev_kfree_skb(skb); /* restart transmitter in case locked */ @@ -1250,9 +1246,9 @@ static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev) static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data; - struct ar2313_private *sp = dev->priv; + struct ar2313_private *sp = netdev_priv(dev); int ret; - + switch (cmd) { case SIOCETHTOOL: @@ -1272,12 +1268,12 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) return -EFAULT; return 0; - + case SIOCGMIIPHY: case SIOCGMIIREG: case SIOCSMIIREG: return phy_mii_ioctl(sp->phy_dev, data, cmd); - + default: break; } @@ -1285,26 +1281,34 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) return -EOPNOTSUPP; } -static struct net_device_stats *ar2313_get_stats(struct net_device *dev) +static void ar2313_adjust_link(struct net_device *dev) { - struct ar2313_private *sp = dev->priv; - return &sp->stats; -} + struct ar2313_private *sp = netdev_priv(dev); + unsigned int mc; + if (!sp->phy_dev->link) + return; -static void ar2313_adjust_link(struct net_device *dev) -{ - printk(KERN_ERR " ar2313_adjust_link implementation missing\n"); + if (sp->phy_dev->duplex != sp->oldduplex) { + mc = readl(&sp->eth_regs->mac_control); + mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO); + if (sp->phy_dev->duplex) + mc |= MAC_CONTROL_F; + else + mc |= MAC_CONTROL_DRO; + writel(mc, &sp->eth_regs->mac_control); + sp->oldduplex = sp->phy_dev->duplex; + } } #define MII_ADDR(phy, reg) \ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) -static int +static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) { struct net_device *const dev = bus->priv; - struct ar2313_private *sp = (struct ar2313_private *) dev->priv; + struct ar2313_private *sp = netdev_priv(dev); volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; ethernet->mii_addr = MII_ADDR(phy_addr, regnum); @@ -1312,12 +1316,12 @@ mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) return (ethernet->mii_data >> MII_DATA_SHIFT); } -static int +static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) { struct net_device *const dev = bus->priv; - struct ar2313_private *sp = (struct ar2313_private *) dev->priv; + struct ar2313_private *sp = netdev_priv(dev); volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; while (ethernet->mii_addr & MII_ADDR_BUSY); @@ -1332,13 +1336,13 @@ static int mdiobus_reset(struct mii_bus *bus) struct net_device *const dev = bus->priv; ar2313_reset_reg(dev); - + return 0; } static int mdiobus_probe (struct net_device *dev) { - struct ar2313_private *const sp = (struct ar2313_private *) dev->priv; + struct ar2313_private *const sp = netdev_priv(dev); struct phy_device *phydev = NULL; int phy_addr; @@ -1348,19 +1352,19 @@ static int mdiobus_probe (struct net_device *dev) phydev = sp->mii_bus.phy_map[phy_addr]; break; /* break out with first one found */ } - + if (!phydev) { printk (KERN_ERR "ar2313:%s: no PHY found\n", dev->name); return -1; } - + /* now we are supposed to have a proper phydev, to attach to... */ BUG_ON(!phydev); BUG_ON(phydev->attached_dev); - + phydev = phy_connect(dev, phydev->dev.bus_id, &ar2313_adjust_link, 0, PHY_INTERFACE_MODE_MII); - + if (IS_ERR(phydev)) { printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); return PTR_ERR(phydev); @@ -1375,18 +1379,16 @@ static int mdiobus_probe (struct net_device *dev) /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */ | SUPPORTED_MII | SUPPORTED_TP); - + phydev->advertising = phydev->supported; - - //sp->old_link = 0; - //sp->old_speed = 0; - //sp->old_duplex = -1; + + sp->oldduplex = -1; sp->phy_dev = phydev; - + printk(KERN_INFO "%s: attached PHY driver [%s] " "(mii_bus:phy_addr=%s)\n", dev->name, phydev->drv->name, phydev->dev.bus_id); - + return 0; }