X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/0fd5c228ecc77d51e51296a9a581318bcfad60a7..d0c7c3d907e163bc165785683c7da8b72d46104f:/package/kernel/modules/other.mk

diff --git a/package/kernel/modules/other.mk b/package/kernel/modules/other.mk
index 86b02a40f..abac4811d 100644
--- a/package/kernel/modules/other.mk
+++ b/package/kernel/modules/other.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2006-2009 OpenWrt.org
+# Copyright (C) 2006-2012 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -7,75 +7,97 @@
 
 OTHER_MENU:=Other modules
 
-define KernelPackage/crc-itu-t
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=CRC ITU-T V.41 support
-  KCONFIG:=CONFIG_CRC_ITU_T
-  FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
-endef
-
-define KernelPackage/crc-itu-t/description
- Kernel module for CRC ITU-T V.41 support
-endef
+WATCHDOG_DIR:=watchdog
 
-$(eval $(call KernelPackage,crc-itu-t))
 
-define KernelPackage/crc-ccitt
+define KernelPackage/bluetooth
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=CRC-CCITT support
-  KCONFIG:=CONFIG_CRC_CCITT
-  FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+  TITLE:=Bluetooth support
+  DEPENDS:=@USB_SUPPORT +kmod-usb-core
+  KCONFIG:= \
+	CONFIG_BLUEZ \
+	CONFIG_BLUEZ_L2CAP \
+	CONFIG_BLUEZ_SCO \
+	CONFIG_BLUEZ_RFCOMM \
+	CONFIG_BLUEZ_BNEP \
+	CONFIG_BLUEZ_HCIUART \
+	CONFIG_BLUEZ_HCIUSB \
+	CONFIG_BLUEZ_HIDP \
+	CONFIG_BT \
+	CONFIG_BT_L2CAP=y \
+	CONFIG_BT_SCO=y \
+	CONFIG_BT_RFCOMM \
+	CONFIG_BT_BNEP \
+	CONFIG_BT_HCIBTUSB \
+	CONFIG_BT_HCIUSB \
+	CONFIG_BT_HCIUART \
+	CONFIG_BT_HCIUART_H4 \
+	CONFIG_BT_HIDP \
+	CONFIG_HID_SUPPORT=y
+  $(call AddDepends/crc16)
+  $(call AddDepends/hid)
+  $(call AddDepends/rfkill)
+  FILES:= \
+	$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
+	$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
+	$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
+	$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
+	$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
+	$(LINUX_DIR)/drivers/bluetooth/btusb.ko
+  ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.39)),1)
+    AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
+  else
+    FILES+= \
+	$(LINUX_DIR)/net/bluetooth/l2cap.ko \
+	$(LINUX_DIR)/net/bluetooth/sco.ko
+    AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+  endif
 endef
 
-define KernelPackage/crc-ccitt/description
- Kernel module for CRC-CCITT support
+define KernelPackage/bluetooth/description
+ Kernel support for Bluetooth devices
 endef
 
-$(eval $(call KernelPackage,crc-ccitt))
+$(eval $(call KernelPackage,bluetooth))
 
 
-define KernelPackage/crc7
+define KernelPackage/bluetooth-hci-h4p
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=CRC7 support
-  KCONFIG:=CONFIG_CRC7
-  FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,crc7)
+  TITLE:=HCI driver with H4 Nokia extensions
+  DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
+  KCONFIG:=CONFIG_BT_HCIH4P
+  FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
+  AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
 endef
 
-define KernelPackage/crc7/description
- Kernel module for CRC7 support
+define KernelPackage/bluetooth-hci-h4p/description
+  HCI driver with H4 Nokia extensions
 endef
 
-$(eval $(call KernelPackage,crc7))
+$(eval $(call KernelPackage,bluetooth-hci-h4p))
 
 
-define KernelPackage/crc16
+define KernelPackage/cpu-msr
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=CRC16 support
-  KCONFIG:=CONFIG_CRC16
-  FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,crc16)
+  TITLE:=x86 CPU MSR support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_X86_MSR
+  FILES:=$(LINUX_DIR)/arch/x86/kernel/msr.ko
+  AUTOLOAD:=$(call AutoLoad,20,msr)
 endef
 
-define KernelPackage/crc16/description
- Kernel module for CRC16 support
+define KernelPackage/cpu-msr/description
+ Kernel module for Model Specific Registers support in x86 CPUs
 endef
 
-$(eval $(call KernelPackage,crc16))
+$(eval $(call KernelPackage,cpu-msr))
 
 
 define KernelPackage/eeprom-93cx6
   SUBMENU:=$(OTHER_MENU)
   TITLE:=EEPROM 93CX6 support
-  DEPENDS:=@LINUX_2_6
   KCONFIG:=CONFIG_EEPROM_93CX6
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.29)),1)
-  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
-else
-  FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
-endif
+  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
   AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
 endef
 
@@ -86,767 +108,815 @@ endef
 $(eval $(call KernelPackage,eeprom-93cx6))
 
 
-define KernelPackage/lp
+define KernelPackage/eeprom-at24
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Parallel port and line printer support
-  DEPENDS:=@LINUX_2_4
-  KCONFIG:= \
-	CONFIG_PARPORT \
-	CONFIG_PRINTER \
-	CONFIG_PPDEV
-  FILES:= \
-	$(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,parport lp)
+  TITLE:=EEPROM AT24 support
+  KCONFIG:=CONFIG_EEPROM_AT24
+  DEPENDS:=+kmod-i2c-core
+  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
+  AUTOLOAD:=$(call AutoLoad,60,at24)
 endef
 
-$(eval $(call KernelPackage,lp))
+define KernelPackage/eeprom-at24/description
+ Kernel module for most I2C EEPROMs
+endef
 
-define KernelPackage/pcspkr
+$(eval $(call KernelPackage,eeprom-at24))
+
+
+define KernelPackage/eeprom-at25
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=PC speaker support
-  DEPENDS:=@LINUX_2_6
-  KCONFIG:=CONFIG_INPUT_PCSPKR
-  FILES:= \
-	$(LINUX_DIR)/drivers/input/misc/pcspkr.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50, \
-  	pcspkr \
-  )
+  TITLE:=EEPROM AT25 support
+  KCONFIG:=CONFIG_EEPROM_AT25
+  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
+  AUTOLOAD:=$(call AutoLoad,61,at25)
 endef
 
-define KernelPackage/pcspkr/description
- This enables sounds (tones) through the pc speaker
+define KernelPackage/eeprom-at25/description
+ Kernel module for most SPI EEPROMs
 endef
 
-$(eval $(call KernelPackage,pcspkr))
+$(eval $(call KernelPackage,eeprom-at25))
 
-define KernelPackage/pcmcia-core
+
+define KernelPackage/gpio-cs5535
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=PCMCIA/CardBus support
-  DEPENDS:=@PCMCIA_SUPPORT
-  KCONFIG:= \
-	CONFIG_PCMCIA \
-	CONFIG_CARDBUS \
-	CONFIG_PCCARD \
-	CONFIG_PCCARD_NONSTATIC \
-	PCMCIA_DEBUG=n
+  TITLE:=AMD CS5535/CS5536 GPIO driver
+  DEPENDS:=@TARGET_x86 @LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_35||LINUX_2_6_36||LINUX_2_6_37
+  KCONFIG:=CONFIG_CS5535_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.ko
+  AUTOLOAD:=$(call AutoLoad,50,cs5535_gpio)
 endef
 
-define KernelPackage/pcmcia-core/2.4
-#  KCONFIG:= \
-#	CONFIG_PCMCIA \
-#	CONFIG_CARDBUS
-  FILES:= \
-	$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,25,pcmcia_core ds)
+define KernelPackage/gpio-cs5535/description
+ This package contains the AMD CS5535/CS5536 GPIO driver
 endef
 
-define KernelPackage/pcmcia-core/2.6
-#  KCONFIG:= \
-#	CONFIG_PCCARD \
-#	CONFIG_PCMCIA \
-#	CONFIG_PCCARD_NONSTATIC \
-#	PCMCIA_DEBUG=n
-  FILES:= \
-	$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,25,pcmcia_core pcmcia)
+$(eval $(call KernelPackage,gpio-cs5535))
+
+
+define KernelPackage/gpio-cs5535-new
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=AMD CS5535/CS5536 GPIO driver with improved sysfs support
+  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32)
+  KCONFIG:=CONFIG_GPIO_CS5535
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.1.0)),1)
+  FILES:=$(LINUX_DIR)/drivers/gpio/gpio-cs5535.ko
+  AUTOLOAD:=$(call AutoLoad,50,gpio-cs5535)
+else
+  FILES:=$(LINUX_DIR)/drivers/gpio/cs5535-gpio.ko
+  AUTOLOAD:=$(call AutoLoad,50,cs5535-gpio)
+endif
 endef
 
-define KernelPackage/pcmcia-core/description
- Kernel support for PCMCIA/CardBus controllers
+define KernelPackage/gpio-cs5535-new/description
+ This package contains the new AMD CS5535/CS5536 GPIO driver
 endef
 
-$(eval $(call KernelPackage,pcmcia-core))
+$(eval $(call KernelPackage,gpio-cs5535-new))
 
 
-define KernelPackage/pcmcia-yenta
+define KernelPackage/gpio-dev
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=yenta socket driver
-  DEPENDS:=kmod-pcmcia-core
-  KCONFIG:=CONFIG_YENTA
-  FILES:= \
-	$(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,41,rsrc_nonstatic yenta_socket)
+  TITLE:=Generic GPIO char device support
+  DEPENDS:=@GPIO_SUPPORT
+  KCONFIG:=CONFIG_GPIO_DEVICE
+  FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
+  AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+endef
+
+define KernelPackage/gpio-dev/description
+  Kernel module to allows control of GPIO pins using a character device.
 endef
 
-$(eval $(call KernelPackage,pcmcia-yenta))
+$(eval $(call KernelPackage,gpio-dev))
+
 
-define KernelPackage/pcmcia-au1000
+define KernelPackage/gpio-nsc
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=RMI/AMD Au1000 PCMCIA support
-  DEPENDS:=kmod-pcmcia-core @TARGET_au1000
-  FILES:=$(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,41,au1x00_ss)
+  TITLE:=Natsemi GPIO support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_NSC_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.ko
+  AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
+endef
+
+define KernelPackage/gpio-nsc/description
+ Kernel module for Natsemi GPIO
 endef
 
-$(eval $(call KernelPackage,pcmcia-au1000))
+$(eval $(call KernelPackage,gpio-nsc))
 
-define KernelPackage/pcmcia-bcm63xx
+
+define KernelPackage/gpio-pc8736x
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Broadcom BCM63xx PCMCIA support
-  DEPENDS:=kmod-pcmcia-core @TARGET_brcm63xx
-  KCONFIG:=CONFIG_PCMCIA_BCM63XX
-  FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
+  TITLE:=PC8736x GPIO support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_PC8736x_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/pc8736x_gpio.ko
+  AUTOLOAD:=$(call AutoLoad,40,pc8736x_gpio)
 endef
 
-define KernelPackage/pcmcia-bcm63xx/description
-  Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
+define KernelPackage/gpio-pc8736x/description
+ Kernel module for PC8736x GPIO
 endef
 
-$(eval $(call KernelPackage,pcmcia-bcm63xx))
+$(eval $(call KernelPackage,gpio-pc8736x))
+
 
-define KernelPackage/pcmcia-serial
+define KernelPackage/gpio-scx200
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Serial devices support
-  DEPENDS:=kmod-pcmcia-core
-  KCONFIG:= \
-	CONFIG_PCMCIA_SERIAL_CS \
-	CONFIG_SERIAL_8250_CS
-  AUTOLOAD:=$(call AutoLoad,45,serial_cs)
+  TITLE:=Natsemi SCX200 GPIO support
+  DEPENDS:=@TARGET_x86 +kmod-gpio-nsc
+  KCONFIG:=CONFIG_SCx200_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.ko
+  AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
 endef
 
-define KernelPackage/pcmcia-serial/2.4
-#  KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
-  FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/gpio-scx200/description
+ Kernel module for SCX200 GPIO
 endef
 
-define KernelPackage/pcmcia-serial/2.6
-#  KCONFIG:=CONFIG_SERIAL_8250_CS
-  FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
+$(eval $(call KernelPackage,gpio-scx200))
+
+define KernelPackage/gpio-nxp-74hc164
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=NXP 74HC164 GPIO expander support
+  DEPENDS:=@TARGET_brcm63xx
+  KCONFIG:=CONFIG_GPIO_NXP_74HC164
+  FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
+  AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
 endef
 
-define KernelPackage/pcmcia-serial/description
- Kernel support for PCMCIA/CardBus serial devices
+define KernelPackage/gpio-nxp-74hc164/description
+  Kernel module for NXP 74HC164 GPIO expander
 endef
 
-$(eval $(call KernelPackage,pcmcia-serial))
+$(eval $(call KernelPackage,gpio-nxp-74hc164))
 
-define KernelPackage/ssb
+define KernelPackage/hid
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Silicon Sonics Backplane glue code
-  DEPENDS:=@LINUX_2_6 @PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
-  KCONFIG:=\
-	CONFIG_SSB \
-	CONFIG_SSB_B43_PCI_BRIDGE=y \
-	CONFIG_SSB_DRIVER_MIPS=n \
-	CONFIG_SSB_DRIVER_PCICORE=y \
-	CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
-	CONFIG_SSB_PCIHOST=y \
-	CONFIG_SSB_PCIHOST_POSSIBLE=y \
-	CONFIG_SSB_POSSIBLE=y \
-	CONFIG_SSB_SPROM=y \
-	CONFIG_SSB_SILENT=y
-  FILES:=$(LINUX_DIR)/drivers/ssb/ssb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,29,ssb)
+  TITLE:=HID Devices
+  KCONFIG:=CONFIG_HID
+  FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
+  AUTOLOAD:=$(call AutoLoad,61,hid)
+  $(call AddDepends/input,+kmod-input-evdev)
 endef
 
-define KernelPackage/ssb/description
-  Silicon Sonics Backplane glue code.
+define KernelPackage/hid/description
+ Kernel modules for HID devices
 endef
 
-$(eval $(call KernelPackage,ssb))
+$(eval $(call KernelPackage,hid))
 
 
-define KernelPackage/bluetooth
+define KernelPackage/input-core
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Bluetooth support
-  DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-hid
+  TITLE:=Input device core
+  KCONFIG:=CONFIG_INPUT
+  FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
+  AUTOLOAD:=$(call AutoLoad,19,input-core)
+endef
+
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
+endef
+
+$(eval $(call KernelPackage,input-core))
+
+
+define KernelPackage/input-evdev
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Input event device
+  KCONFIG:=CONFIG_INPUT_EVDEV
+  FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
+  AUTOLOAD:=$(call AutoLoad,60,evdev)
+  $(call AddDepends/input)
+endef
+
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
+endef
+
+$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/input-gpio-buttons
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Polled GPIO buttons input device
+  DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
   KCONFIG:= \
-	CONFIG_BLUEZ \
-	CONFIG_BLUEZ_L2CAP \
-	CONFIG_BLUEZ_SCO \
-	CONFIG_BLUEZ_RFCOMM \
-	CONFIG_BLUEZ_BNEP \
-	CONFIG_BLUEZ_HCIUART \
-	CONFIG_BLUEZ_HCIUSB \
-	CONFIG_BLUEZ_HIDP \
-	CONFIG_BT \
-	CONFIG_BT_L2CAP \
-	CONFIG_BT_SCO \
-	CONFIG_BT_RFCOMM \
-	CONFIG_BT_BNEP \
-	CONFIG_BT_HCIBTUSB \
-	CONFIG_BT_HCIUSB \
-	CONFIG_BT_HCIUART \
-	CONFIG_BT_HIDP
-endef
-
-define KernelPackage/bluetooth/2.4
-#  KCONFIG:= \
-#	CONFIG_BLUEZ \
-#	CONFIG_BLUEZ_L2CAP \
-#	CONFIG_BLUEZ_SCO \
-#	CONFIG_BLUEZ_RFCOMM \
-#	CONFIG_BLUEZ_BNEP \
-#	CONFIG_BLUEZ_HCIUART \
-#	CONFIG_BLUEZ_HCIUSB
-  FILES:= \
-	$(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,bluez l2cap sco rfcomm bnep hci_uart hci_usb)
-endef
-
-define KernelPackage/bluetooth/2.6
-#  KCONFIG:= \
-#	CONFIG_BT \
-#	CONFIG_BT_L2CAP \
-#	CONFIG_BT_SCO \
-#	CONFIG_BT_RFCOMM \
-#	CONFIG_BT_BNEP \
-#	CONFIG_BT_HCIUSB \
-#	CONFIG_BT_HCIUART
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.27)),1)
-  FILES:= \
-	$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/bluetooth/btusb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
-else
-  FILES:= \
-	$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart hci_usb)
-endif
+	CONFIG_INPUT_GPIO_BUTTONS \
+	CONFIG_INPUT_MISC=y
+  FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.ko
+  AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
 endef
 
-define KernelPackage/bluetooth/description
- Kernel support for Bluetooth devices
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
 endef
 
-$(eval $(call KernelPackage,bluetooth))
+$(eval $(call KernelPackage,input-gpio-buttons))
 
 
-define KernelPackage/mmc
+define KernelPackage/input-gpio-keys
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=MMC/SD Card Support
-  DEPENDS:=@LINUX_2_6
+  TITLE:=GPIO key support
+  DEPENDS:= @GPIO_SUPPORT
   KCONFIG:= \
-	CONFIG_MMC \
-	CONFIG_MMC_BLOCK \
-	CONFIG_MMC_DEBUG=n \
-	CONFIG_MMC_UNSAFE_RESUME=n \
-	CONFIG_MMC_BLOCK_BOUNCE=y \
-	CONFIG_MMC_SDHCI=n \
-	CONFIG_MMC_TIFM_SD=n \
-	CONFIG_MMC_WBSD=n \
-	CONFIG_SDIO_UART=n
-  FILES:= \
-	$(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
-	$(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
+	CONFIG_KEYBOARD_GPIO \
+	CONFIG_INPUT_KEYBOARD=y
+  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
+  AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+  $(call AddDepends/input)
 endef
 
-define KernelPackage/mmc/description
- Kernel support for MMC/SD cards
+define KernelPackage/input-gpio-keys/description
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
 endef
 
-$(eval $(call KernelPackage,mmc))
+$(eval $(call KernelPackage,input-gpio-keys))
 
 
-define KernelPackage/mmc-at91
+define KernelPackage/input-gpio-keys-polled
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=MMC/SD Card Support on AT91
-  DEPENDS:=@TARGET_at91 +kmod-mmc
-  KCONFIG:=CONFIG_MMC_AT91
-  FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+  TITLE:=Polled GPIO key support
+  DEPENDS:=@GPIO_SUPPORT @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_34||LINUX_2_6_35||LINUX_2_6_36) +kmod-input-polldev
+  KCONFIG:= \
+	CONFIG_KEYBOARD_GPIO_POLLED \
+	CONFIG_INPUT_KEYBOARD=y
+  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
+  AUTOLOAD:=$(call AutoLoad,62,gpio_keys_polled)
+  $(call AddDepends/input)
 endef
 
-define KernelPackage/mmc-at91/description
- Kernel support for MMC/SD cards on the AT91 target
+define KernelPackage/input-gpio-keys-polled/description
+ Kernel module for support polled GPIO keys input device
 endef
 
-$(eval $(call KernelPackage,mmc-at91))
+$(eval $(call KernelPackage,input-gpio-keys-polled))
 
 
-# XXX: added a workaround for watchdog path changes
-ifeq ($(KERNEL),2.4)
-  WATCHDOG_DIR=char
-endif
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
-  WATCHDOG_DIR=watchdog
-endif
-WATCHDOG_DIR?=char/watchdog
+define KernelPackage/input-gpio-encoder
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=GPIO rotay encoder
+  KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
+  FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
+  AUTOLOAD:=$(call AutoLoad,62,rotary_encoder)
+  $(call AddDepends/input,@GPIO_SUPPORT)
+endef
+
+define KernelPackage/gpio-encoder/description
+ Kernel module to use rotary encoders connected to GPIO pins
+endef
 
-define KernelPackage/atmel-wdt
+$(eval $(call KernelPackage,input-gpio-encoder))
+
+
+define KernelPackage/input-joydev
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=AT32AP700x watchdog
-  DEPENDS:=@TARGET_avr32
-  KCONFIG:=CONFIG_AT32AP700X_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+  TITLE:=Joystick device support
+  KCONFIG:=CONFIG_INPUT_JOYDEV
+  FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
+  AUTOLOAD:=$(call AutoLoad,62,joydev)
+  $(call AddDepends/input)
 endef
 
-define KernelPackage/atmel-wdt/description
- AT32AP700x watchdog
+define KernelPackage/input-joydev/description
+  Kernel module for joystick support
 endef
 
-$(eval $(call KernelPackage,atmel-wdt))
+$(eval $(call KernelPackage,input-joydev))
 
 
-define KernelPackage/softdog
+define KernelPackage/input-polldev
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Software watchdog driver
-  KCONFIG:=CONFIG_SOFT_WATCHDOG
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,softdog)
+  TITLE:=Polled Input device support
+  KCONFIG:=CONFIG_INPUT_POLLDEV
+  FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
+  AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+  $(call AddDepends/input)
 endef
 
-define KernelPackage/softdog/description
- Software watchdog driver
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
 endef
 
-$(eval $(call KernelPackage,softdog))
+$(eval $(call KernelPackage,input-polldev))
 
-define KernelPackage/rdc321x-wdt
+
+define KernelPackage/lp
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=RDC321x watchdog
-  DEPENDS:=@TARGET_rdc
-  KCONFIG:=CONFIG_RDC321X_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/rdc321x_wdt.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,rdc321x_wdt)
+  TITLE:=Parallel port and line printer support
+  DEPENDS:=@BROKEN
+  KCONFIG:= \
+	CONFIG_PARPORT \
+	CONFIG_PRINTER \
+	CONFIG_PPDEV
+  FILES:= \
+	$(LINUX_DIR)/drivers/parport/parport.ko \
+	$(LINUX_DIR)/drivers/char/lp.ko \
+	$(LINUX_DIR)/drivers/char/ppdev.ko
+  AUTOLOAD:=$(call AutoLoad,50,parport lp)
 endef
 
-define KernelPackage/rdc321x-wdt/description
-  RDC-321x watchdog driver
+$(eval $(call KernelPackage,lp))
+
+
+define KernelPackage/mmc
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=MMC/SD Card Support
+  KCONFIG:= \
+	CONFIG_MMC \
+	CONFIG_MMC_BLOCK \
+	CONFIG_MMC_DEBUG=n \
+	CONFIG_MMC_UNSAFE_RESUME=n \
+	CONFIG_MMC_BLOCK_BOUNCE=y \
+	CONFIG_MMC_SDHCI=n \
+	CONFIG_MMC_TIFM_SD=n \
+	CONFIG_MMC_WBSD=n \
+	CONFIG_SDIO_UART=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
+	$(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+  AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
 endef
 
-$(eval $(call KernelPackage,rdc321x-wdt))
+define KernelPackage/mmc/description
+ Kernel support for MMC/SD cards
+endef
+
+$(eval $(call KernelPackage,mmc))
 
 
-define KernelPackage/leds-gpio
+define KernelPackage/mmc-atmelmci
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=GPIO LED support
-  DEPENDS:= @GPIO_SUPPORT
-  KCONFIG:=CONFIG_LEDS_GPIO
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
+  TITLE:=Amtel MMC Support
+  DEPENDS:=@TARGET_avr32 +kmod-mmc
+  KCONFIG:=CONFIG_MMC_ATMELMCI
+  FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.ko
+  AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
 endef
 
-define KernelPackage/leds-gpio/description
- Kernel module for LEDs on GPIO lines
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for  Atmel Multimedia Card Interface.
 endef
 
-$(eval $(call KernelPackage,leds-gpio))
+$(eval $(call KernelPackage,mmc-atmelmci,1))
 
 
-define KernelPackage/ledtrig-adm5120-switch
+define KernelPackage/oprofile
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=LED ADM5120 Switch Port Status Trigger
-  DEPENDS:=@TARGET_adm5120
-  KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
-  FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
+  TITLE:=OProfile profiling support
+  KCONFIG:=CONFIG_OPROFILE
+  FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
+  DEPENDS:=@KERNEL_PROFILING
 endef
 
-define KernelPackage/ledtrig-adm5120-switch/description
- Kernel module to allow LEDs to be controlled by the port states
- of the ADM5120 built-in ethernet switch.
+define KernelPackage/oprofile/description
+  Kernel module for support for oprofile system profiling.
 endef
 
-$(eval $(call KernelPackage,ledtrig-adm5120-switch))
+$(eval $(call KernelPackage,oprofile))
 
 
-define KernelPackage/leds-net48xx
+define KernelPackage/rfkill
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Soekris Net48xx LED support
-  DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
-  KCONFIG:=CONFIG_LEDS_NET48XX
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
+  TITLE:=RF switch subsystem support
+  KCONFIG:= \
+    CONFIG_RFKILL \
+    CONFIG_RFKILL_INPUT=y \
+    CONFIG_RFKILL_LEDS=y
+ifeq ($(CONFIG_LINUX_2_6_30),)
+  FILES:= \
+    $(LINUX_DIR)/net/rfkill/rfkill.ko
+  AUTOLOAD:=$(call AutoLoad,20,rfkill)
+else
+  FILES:= \
+    $(LINUX_DIR)/net/rfkill/rfkill.ko \
+    $(LINUX_DIR)/net/rfkill/rfkill-input.ko
+  AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
+endif
+  $(call SetDepends/rfkill)
 endef
 
-define KernelPackage/leds-net48xx/description
- Kernel module for Soekris Net48xx LEDs
+define KernelPackage/rfkill/description
+  Say Y here if you want to have control over RF switches
+  found on many WiFi and Bluetooth cards.
 endef
 
-$(eval $(call KernelPackage,leds-net48xx))
+$(eval $(call KernelPackage,rfkill))
 
 
-define KernelPackage/leds-wrap
+define KernelPackage/softdog
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=PCengines WRAP LED support
-  DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
-  KCONFIG:=CONFIG_LEDS_WRAP
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
+  TITLE:=Software watchdog driver
+  KCONFIG:=CONFIG_SOFT_WATCHDOG
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
+  AUTOLOAD:=$(call AutoLoad,50,softdog)
 endef
 
-define KernelPackage/leds-wrap/description
- Kernel module for PCengines WRAP LEDs
+define KernelPackage/softdog/description
+ Software watchdog driver
 endef
 
-$(eval $(call KernelPackage,leds-wrap))
+$(eval $(call KernelPackage,softdog))
 
 
-define KernelPackage/leds-alix
+define KernelPackage/ssb
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=PCengines ALIX LED support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_LEDS_ALIX2
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-alix2.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,leds-alix2)
+  TITLE:=Silicon Sonics Backplane glue code
+  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+  KCONFIG:=\
+	CONFIG_SSB \
+	CONFIG_SSB_B43_PCI_BRIDGE=y \
+	CONFIG_SSB_DRIVER_MIPS=n \
+	CONFIG_SSB_DRIVER_PCICORE=y \
+	CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+	CONFIG_SSB_PCIHOST=y \
+	CONFIG_SSB_PCIHOST_POSSIBLE=y \
+	CONFIG_SSB_POSSIBLE=y \
+	CONFIG_SSB_SPROM=y \
+	CONFIG_SSB_SILENT=y
+  FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
+  AUTOLOAD:=$(call AutoLoad,29,ssb)
 endef
 
-define KernelPackage/leds-alix/description
- Kernel module for PCengines ALIX LEDs
+define KernelPackage/ssb/description
+  Silicon Sonics Backplane glue code.
 endef
 
-$(eval $(call KernelPackage,leds-alix))
+$(eval $(call KernelPackage,ssb))
 
 
-define KernelPackage/leds-wndr3700-usb
+define KernelPackage/bcma
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=WNDR3700 USB LED support
-  DEPENDS:= @TARGET_ar71xx
-  KCONFIG:=CONFIG_LEDS_WNDR3700_USB
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb)
+  TITLE:=BCMA support
+  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+  KCONFIG:=\
+	CONFIG_BCMA \
+	CONFIG_BCMA_POSSIBLE=y \
+	CONFIG_BCMA_BLOCKIO=y \
+	CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
+	CONFIG_BCMA_HOST_PCI=y \
+	CONFIG_BCMA_DRIVER_MIPS=n \
+	CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
+	CONFIG_BCMA_DEBUG=n
+  FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
+  AUTOLOAD:=$(call AutoLoad,29,bcma)
 endef
 
-define KernelPackage/leds-wndr3700-usb/description
- Kernel module for the USB LED on the NETGWR WNDR3700 board.
+define KernelPackage/bcma/description
+   Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
 endef
 
-$(eval $(call KernelPackage,leds-wndr3700-usb))
+$(eval $(call KernelPackage,bcma))
 
 
-define KernelPackage/ledtrig-netdev
+define KernelPackage/wdt-geode
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=LED NETDEV Trigger
-  KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
-  FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+  TITLE:=Geode/LX Watchdog timer
+  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
+  KCONFIG:=CONFIG_GEODE_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.ko
+  AUTOLOAD:=$(call AutoLoad,50,geodewdt)
 endef
 
-define KernelPackage/ledtrig-netdev/description
- Kernel module to drive LEDs based on network activity.
+define KernelPackage/wdt-geode/description
+  Kernel module for Geode watchdog timer.
 endef
 
-$(eval $(call KernelPackage,ledtrig-netdev))
+$(eval $(call KernelPackage,wdt-geode))
 
 
-define KernelPackage/ledtrig-morse
+define KernelPackage/cs5535-clockevt
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=LED Morse Trigger
-  KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
-  FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+  TITLE:=CS5535/CS5536 high-res timer (MFGPT) events
+  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
+  KCONFIG:=CONFIG_CS5535_CLOCK_EVENT_SRC
+  FILES:=$(LINUX_DIR)/drivers/clocksource/cs5535-clockevt.ko
+  AUTOLOAD:=$(call AutoLoad,50,cs5535-clockevt)
 endef
 
-define KernelPackage/ledtrig-morse/description
- Kernel module to show morse coded messages on LEDs.
+define KernelPackage/cs5535-clockevt/description
+  Kernel module for CS5535/6 high-res clock event source
 endef
 
-$(eval $(call KernelPackage,ledtrig-morse))
+$(eval $(call KernelPackage,cs5535-clockevt))
 
 
-define KernelPackage/gpio-dev
+define KernelPackage/cs5535-mfgpt
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Generic GPIO char device support
-  DEPENDS:=@GPIO_SUPPORT
-  KCONFIG:=CONFIG_GPIO_DEVICE
-  FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+  TITLE:=CS5535/6 Multifunction General Purpose Timer
+  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd
+  KCONFIG:=CONFIG_CS5535_MFGPT
+  FILES:=$(LINUX_DIR)/drivers/misc/cs5535-mfgpt.ko
+  AUTOLOAD:=$(call AutoLoad,45,cs5535-mfgpt)
 endef
 
-define KernelPackage/gpio-dev/description
-  Kernel module to allows control of GPIO pins using a character device.
+define KernelPackage/cs5535-mfgpt/description
+  Kernel module for CS5535/6 multifunction general purpose timer.
 endef
 
-$(eval $(call KernelPackage,gpio-dev))
+$(eval $(call KernelPackage,cs5535-mfgpt))
 
 
-define KernelPackage/nsc-gpio
+define KernelPackage/cs5535-mfd
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Natsemi GPIO support
+  TITLE:=CS5535/6 Multifunction General Purpose Driver
   DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_NSC_GPIO
-  FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
+  KCONFIG:=CONFIG_MFD_CS5535
+  FILES:= \
+  	$(LINUX_DIR)/drivers/mfd/mfd-core.ko \
+  	$(LINUX_DIR)/drivers/mfd/cs5535-mfd.ko
+  AUTOLOAD:=$(call AutoLoad,44,mfd-core cs5535-mfd)
 endef
 
-define KernelPackage/nsc-gpio/description
- Kernel module for Natsemi GPIO
+define KernelPackage/cs5535-mfd/description
+  Core driver for CS5535/CS5536 MFD functions.
 endef
 
-$(eval $(call KernelPackage,nsc-gpio))
+$(eval $(call KernelPackage,cs5535-mfd))
 
 
-define KernelPackage/scx200-gpio
+define KernelPackage/wdt-omap
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Natsemi SCX200 GPIO support
-  DEPENDS:=@TARGET_x86 +kmod-nsc-gpio
-  KCONFIG:=CONFIG_SCx200_GPIO
-  FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
+  TITLE:=OMAP Watchdog timer
+  DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
+  KCONFIG:=CONFIG_OMAP_WATCHDOG
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
+  AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
 endef
 
-define KernelPackage/scx200-gpio/description
- Kernel module for SCX200 GPIO
+define KernelPackage/wdt-omap/description
+  Kernel module for TI omap watchdog timer.
 endef
 
-$(eval $(call KernelPackage,scx200-gpio))
+$(eval $(call KernelPackage,wdt-omap))
 
 
-define KernelPackage/scx200-wdt
+define KernelPackage/wdt-orion
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Natsemi SCX200 Watchdog support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_SCx200_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
+  TITLE:=Marvell Orion Watchdog timer
+  DEPENDS:=@TARGET_orion
+  KCONFIG:=CONFIG_ORION_WATCHDOG
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
+  AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
 endef
 
-define KernelPackage/scx200-wdt/description
- Kernel module for SCX200 Watchdog
+define KernelPackage/wdt-orion/description
+  Kernel module for Marvell orion watchdog timer.
 endef
 
-$(eval $(call KernelPackage,scx200-wdt))
+$(eval $(call KernelPackage,wdt-orion))
 
 
-define KernelPackage/sc520-wdt
+define KernelPackage/wdt-sc520
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Natsemi SC520 Watchdog support
   DEPENDS:=@TARGET_x86
   KCONFIG:=CONFIG_SC520_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.ko
   AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
 endef
 
-define KernelPackage/sc520-wdt/description
+define KernelPackage/wdt-sc520/description
   Kernel module for SC520 Watchdog
 endef
 
-$(eval $(call KernelPackage,sc520-wdt))
+$(eval $(call KernelPackage,wdt-sc520))
 
 
-define KernelPackage/input-core
+define KernelPackage/wdt-scx200
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Input device core
-  DEPENDS:=@LINUX_2_6
-  KCONFIG:=CONFIG_INPUT
-  FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,19,input-core)
+  TITLE:=Natsemi SCX200 Watchdog support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_SCx200_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.ko
+  AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
 endef
 
-define KernelPackage/input-core/description
- Kernel modules for support of input device
+define KernelPackage/wdt-scx200/description
+ Kernel module for SCX200 Watchdog
 endef
 
-$(eval $(call KernelPackage,input-core))
+$(eval $(call KernelPackage,wdt-scx200))
 
 
-define KernelPackage/input-evdev
+define KernelPackage/wdt-ath79
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Input event device
-  DEPENDS:=+kmod-input-core
-  KCONFIG:=CONFIG_INPUT_EVDEV
-  FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,60,evdev)
+  TITLE:=Atheros AR7XXX/AR9XXX watchdog timer
+  DEPENDS:=@TARGET_ar71xx
+  KCONFIG:=CONFIG_ATH79_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/ath79_wdt.ko
+  AUTOLOAD:=$(call AutoLoad,50,ath79_wdt)
 endef
 
-define KernelPackage/input-evdev/description
- Kernel modules for support of input device events
+define KernelPackage/wdt-ath79/description
+  Kernel module for AR7XXX/AR9XXX watchdog timer.
 endef
 
-$(eval $(call KernelPackage,input-evdev))
+$(eval $(call KernelPackage,wdt-ath79))
 
 
-define KernelPackage/hid
+define KernelPackage/pwm
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=HID Devices
-  DEPENDS:=+kmod-input-core +kmod-input-evdev
-  KCONFIG:=CONFIG_HID
-  FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,61,hid)
+  TITLE:=PWM generic API
+  KCONFIG:=CONFIG_GENERIC_PWM
+  FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
+  AUTOLOAD:=$(call AutoLoad,50,pwm)
 endef
 
-define KernelPackage/hid/description
- Kernel modules for HID devices
+define KernelPackage/pwm/description
+ Kernel module that implement a generic PWM API
 endef
 
-$(eval $(call KernelPackage,hid))
+$(eval $(call KernelPackage,pwm))
 
 
-define KernelPackage/input-polldev
+define KernelPackage/pwm-gpio
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Polled Input device support
-  DEPENDS:=+kmod-input-core @LINUX_2_6
-  KCONFIG:=CONFIG_INPUT_POLLDEV
-  FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+  TITLE:=PWM over GPIO
+  DEPENDS:=+kmod-pwm
+  KCONFIG:=CONFIG_GPIO_PWM
+  FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
+  AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
 endef
 
-define KernelPackage/input-polldev/description
- Kernel module for support of polled input devices
+define KernelPackage/pwm-gpio/description
+ Kernel module to models a single-channel PWM device using a timer and a GPIO pin
 endef
 
-$(eval $(call KernelPackage,input-polldev))
+$(eval $(call KernelPackage,pwm-gpio))
 
+define KernelPackage/rtc-core-2.6
+  SUBMENU:=$(OTHER_MENU)
+  DEPENDS:=@LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39
+  TITLE:=Real Time Clock class support
+  KCONFIG:=CONFIG_RTC_CLASS
+  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-core.ko
+  AUTOLOAD:=$(call AutoLoad,29,rtc-core)
+endef
 
-define KernelPackage/input-gpio-keys
+define KernelPackage/rtc-core-2.6/description
+ Generic RTC class support.
+endef
+
+$(eval $(call KernelPackage,rtc-core-2.6))
+
+define KernelPackage/rtc-core-3.x
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=GPIO key support
-  DEPENDS:= @GPIO_SUPPORT +kmod-input-core
-  KCONFIG:=CONFIG_KEYBOARD_GPIO
-  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+  DEPENDS:=@!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39)
+  TITLE:=Real Time Clock class support
+  KCONFIG:=CONFIG_RTC_CLASS=y
 endef
 
-define KernelPackage/input-gpio-keys/description
- This driver implements support for buttons connected
- to GPIO pins of various CPUs (and some other chips).
+define KernelPackage/rtc-core-3.x/description
+ Generic RTC class support.
 endef
 
-$(eval $(call KernelPackage,input-gpio-keys))
+$(eval $(call KernelPackage,rtc-core-3.x))
 
+define KernelPackage/rtc-pcf8563
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Philips PCF8563/Epson RTC8564 RTC support
+  $(call AddDepends/rtc)
+  KCONFIG:=CONFIG_RTC_DRV_PCF8563
+  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
+  AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
+endef
 
-define KernelPackage/input-gpio-buttons
+define KernelPackage/rtc-pcf8563/description
+ Kernel module for Philips PCF8563 RTC chip.
+ The Epson RTC8564 should work as well.
+endef
+
+$(eval $(call KernelPackage,rtc-pcf8563))
+
+
+define KernelPackage/rtc-pcf2123
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Polled GPIO buttons input device
-  DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
-  KCONFIG:= \
-	CONFIG_INPUT_GPIO_BUTTONS \
-	CONFIG_INPUT_MISC=y
-  FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+  TITLE:=Philips PCF2123 RTC support
+  $(call AddDepends/rtc)
+  KCONFIG:=CONFIG_RTC_DRV_PCF2123
+  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
+  AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
 endef
 
-define KernelPackage/input-gpio-buttons/description
- Kernel module for support polled GPIO buttons input device
+define KernelPackage/rtc-pcf2123/description
+ Kernel module for Philips PCF2123 RTC chip.
 endef
 
-$(eval $(call KernelPackage,input-gpio-buttons))
+$(eval $(call KernelPackage,rtc-pcf2123))
 
-define KernelPackage/input-joydev
+
+define KernelPackage/n810bm
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Joystick device support
-  DEPENDS:=+kmod-input-core
-  KCONFIG:=CONFIG_INPUT_JOYDEV
-  FILES:=$(LINUX_DIR)/drivers/input/joydev.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,62,joydev)
+  TITLE:=Nokia N810 battery management driver
+  DEPENDS:=@TARGET_omap24xx
+  KCONFIG:=CONFIG_N810BM
+  FILES:=$(LINUX_DIR)/drivers/cbus/n810bm.ko
+  AUTOLOAD:=$(call AutoLoad,01,n810bm)
 endef
 
-define KernelPackage/input-joydev/description
-  Kernel module for joystick support
+define KernelPackage/n810bm/description
+  Nokia N810 battery management driver.
+  Controls battery power management and battery charging.
 endef
 
-$(eval $(call KernelPackage,input-joydev))
+$(eval $(call KernelPackage,n810bm))
+
 
-define KernelPackage/input-rb532
+define KernelPackage/mtdtests
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=RB532 button device support
-  DEPENDS:=+kmod-input-core @TARGET_rb532
-  KCONFIG:= \
-	CONFIG_INPUT_MISC=y \
-	CONFIG_INPUT_RB532_BUTTON
-  FILES:=$(LINUX_DIR)/drivers/input/misc/rb532_button.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,62,rb532_button)
+  TITLE:=MTD subsystem tests
+  KCONFIG:=CONFIG_MTD_TESTS
+  FILES:=\
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
+	$(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
 endef
 
-define KernelPackage/input-rb532/description
-  Kernel module for RB532 button
+define KernelPackage/mtdtests/description
+ Kernel modules for MTD subsystem/driver testing.
 endef
 
-$(eval $(call KernelPackage,input-rb532))
+$(eval $(call KernelPackage,mtdtests))
 
 
-define KernelPackage/mmc-atmelmci
+define KernelPackage/nand
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Amtel MMC Support
-  DEPENDS:=@TARGET_avr32 +kmod-mmc
-  KCONFIG:=CONFIG_MMC_ATMELMCI
-  FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+  TITLE:=NAND flash support
+  DEPENDS:=@!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39)
+  KCONFIG:=CONFIG_MTD_NAND \
+	CONFIG_MTD_NAND_IDS \
+	CONFIG_MTD_NAND_ECC
+  FILES:= \
+	$(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
+	$(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
+	$(LINUX_DIR)/drivers/mtd/nand/nand.ko
+  AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
 endef
 
-define KernelPackage/mmc-atmelmci/description
- Kernel support for  Atmel Multimedia Card Interface.
+define KernelPackage/nand/description
+ Kernel module for NAND support.
 endef
 
-$(eval $(call KernelPackage,mmc-atmelmci))
+$(eval $(call KernelPackage,nand))
 
 
-define KernelPackage/cs5535-gpio
+define KernelPackage/nandsim
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=AMD CS5535/CS5536 GPIO driver
-  DEPENDS:=@TARGET_x86||@TARGET_olpc
-  KCONFIG:=CONFIG_CS5535_GPIO
-  FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,cs5535_gpio)
+  TITLE:=NAND simulator
+  DEPENDS:=@!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39) +kmod-nand
+  KCONFIG:=CONFIG_MTD_NAND_NANDSIM
+  FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
 endef
 
-define KernelPackage/cs5535-gpio/description
- This package contains the AMD CS5535/CS5536 GPIO driver
+define KernelPackage/nandsim/description
+ Kernel module for NAND flash simulation.
 endef
 
-$(eval $(call KernelPackage,cs5535-gpio))
+$(eval $(call KernelPackage,nandsim))
 
+define KernelPackage/serial-8250
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=8250 UARTs
+  KCONFIG:= CONFIG_SERIAL_8250 \
+	CONFIG_SERIAL_8250_NR_UARTS=16 \
+  	CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+  	CONFIG_SERIAL_8250_EXTENDED=y \
+  	CONFIG_SERIAL_8250_MANY_PORTS=y \
+	CONFIG_SERIAL_8250_SHARE_IRQ=y \
+	CONFIG_SERIAL_8250_DETECT_IRQ=n \
+	CONFIG_SERIAL_8250_RSA=n
+  FILES:=$(LINUX_DIR)/drivers/tty/serial/8250.ko
+endef
 
-define KernelPackage/textsearch
-SUBMENU:=$(OTHER_MENU)
-  TITLE:=Textsearch support is selected if needed
-  DEPENDS:=@LINUX_2_6 @!LINUX_2_6_21
-  KCONFIG:= \
-    CONFIG_TEXTSEARCH=y \
-    CONFIG_TEXTSEARCH_KMP \
-    CONFIG_TEXTSEARCH_BM \
-    CONFIG_TEXTSEARCH_FSM
-  FILES:= \
-    $(LINUX_DIR)/lib/ts_kmp.$(LINUX_KMOD_SUFFIX) \
-    $(LINUX_DIR)/lib/ts_bm.$(LINUX_KMOD_SUFFIX) \
-    $(LINUX_DIR)/lib/ts_fsm.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
+define KernelPackage/serial-8250/description
+ Kernel module for 8250 UART based serial ports.
 endef
 
-$(eval $(call KernelPackage,textsearch))
+$(eval $(call KernelPackage,serial-8250))
 
 
-define KernelPackage/rfkill
+define KernelPackage/acpi-button
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=RF switch subsystem support
-  DEPENDS:=@TARGET_x86||TARGET_olpc||TARGET_s3c24xx||TARGET_brcm47xx
-  KCONFIG:= \
-    CONFIG_RFKILL \
-    CONFIG_RFKILL_INPUT=y \
-    CONFIG_RFKILL_LEDS=y
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.31)),1)
-  FILES:= \
-    $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,rfkill)
-else
-  FILES:= \
-    $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX) \
-    $(LINUX_DIR)/net/rfkill/rfkill-input.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
-endif
+  TITLE:=ACPI Button Support
+  DEPENDS:=@(TARGET_x86_generic||TARGET_x86_kvm_guest||TARGET_x86_xen_domu) +kmod-input-evdev
+  KCONFIG:=CONFIG_ACPI_BUTTON
+  FILES:=$(LINUX_DIR)/drivers/acpi/button.ko
+  AUTOLOAD:=$(call AutoLoad,06,button)
 endef
 
-define KernelPackage/rfkill/description
-  Say Y here if you want to have control over RF switches
-  found on many WiFi and Bluetooth cards.
+define KernelPackage/acpi-button/description
+ Kernel module for ACPI Button support
 endef
 
-$(eval $(call KernelPackage,rfkill))
+$(eval $(call KernelPackage,acpi-button))