X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/17c7b6c3fdc48301e50d22cc6138ede16bd1be24..31800c29b03fe4268985b9761b4ccdabfad7a041:/target/linux/avr32/patches/100-git_sync.patch?ds=sidebyside diff --git a/target/linux/avr32/patches/100-git_sync.patch b/target/linux/avr32/patches/100-git_sync.patch index e9e96144e..2f6291a7d 100644 --- a/target/linux/avr32/patches/100-git_sync.patch +++ b/target/linux/avr32/patches/100-git_sync.patch @@ -1,6 +1,107 @@ -diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig linux-avr32.git/arch/avr32/boards/atngw100/Kconfig ---- linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/arch/avr32/boards/atngw100/Kconfig 2007-07-13 11:24:16.000000000 +0200 +--- a/Documentation/serial/driver ++++ b/Documentation/serial/driver +@@ -186,6 +186,17 @@ + Locking: port_sem taken. + Interrupts: caller dependent. + ++ flush_buffer(port) ++ Flush any write buffers, reset any DMA state and stop any ++ ongoing DMA transfers. ++ ++ This will be called whenever the port->info->xmit circular ++ buffer is cleared. ++ ++ Locking: port->lock taken. ++ Interrupts: locally disabled. ++ This call must not sleep ++ + set_termios(port,termios,oldtermios) + Change the port parameters, including word length, parity, stop + bits. Update read_status_mask and ignore_status_mask to indicate +--- a/arch/avr32/Kconfig ++++ b/arch/avr32/Kconfig +@@ -47,6 +47,9 @@ + config GENERIC_TIME + def_bool y + ++config GENERIC_CLOCKEVENTS ++ def_bool y ++ + config RWSEM_XCHGADD_ALGORITHM + def_bool n + +@@ -70,6 +73,8 @@ + + menu "System Type and features" + ++source "kernel/time/Kconfig" ++ + config SUBARCH_AVR32B + bool + config MMU +@@ -83,6 +88,7 @@ + select MMU + select PERFORMANCE_COUNTERS + select HAVE_GPIO_LIB ++ select GENERIC_ALLOCATOR + + # + # CPU types +@@ -117,6 +123,9 @@ + if BOARD_ATSTK1000 + source "arch/avr32/boards/atstk1000/Kconfig" + endif ++if BOARD_ATNGW100 ++source "arch/avr32/boards/atngw100/Kconfig" ++endif + + choice + prompt "Boot loader type" +@@ -142,6 +151,9 @@ + + source "kernel/Kconfig.preempt" + ++config QUICKLIST ++ def_bool y ++ + config HAVE_ARCH_BOOTMEM_NODE + def_bool n + +@@ -180,6 +192,10 @@ + be dumped to the console when a Non-Maskable Interrupt + happens. + ++config DW_DMAC ++ tristate "Synopsys DesignWare DMA Controller support" ++ default y if CPU_AT32AP7000 ++ + # FPU emulation goes here + + source "kernel/Kconfig.hz" +@@ -196,6 +212,11 @@ + + menu "Power management options" + ++config ARCH_SUSPEND_POSSIBLE ++ def_bool y ++ ++source "kernel/power/Kconfig" ++ + menu "CPU Frequency scaling" + + source "drivers/cpufreq/Kconfig" +--- a/arch/avr32/Makefile ++++ b/arch/avr32/Makefile +@@ -32,6 +32,7 @@ + core-y += arch/avr32/kernel/ + core-y += arch/avr32/mm/ + drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ ++drivers-y += arch/avr32/drivers/ + libs-y += arch/avr32/lib/ + + archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap +--- /dev/null ++++ b/arch/avr32/boards/atngw100/Kconfig @@ -0,0 +1,12 @@ +# NGW100 customization + @@ -14,31 +115,29 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig linux-avr32. + + Choose 'Y' here if you're having i2c-related problems and + want to rule out the i2c bus driver. -diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32.git/arch/avr32/boards/atngw100/setup.c ---- linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/boards/atngw100/setup.c 2007-07-13 11:24:16.000000000 +0200 -@@ -9,10 +9,12 @@ - */ - #include - #include -+#include - #include - #include - #include - #include -+#include - #include - - #include -@@ -21,6 +23,7 @@ - #include - #include +--- a/arch/avr32/boards/atngw100/setup.c ++++ b/arch/avr32/boards/atngw100/setup.c +@@ -25,6 +25,13 @@ #include -+#include + #include ++/* Oscillator frequencies. These are board-specific */ ++unsigned long at32_board_osc_rates[3] = { ++ [0] = 32768, /* 32.768 kHz on RTC osc */ ++ [1] = 20000000, /* 20 MHz on osc0 */ ++ [2] = 12000000, /* 12 MHz on osc1 */ ++}; ++ /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; -@@ -39,6 +42,11 @@ + +@@ -37,11 +44,16 @@ + static struct spi_board_info spi0_board_info[] __initdata = { + { + .modalias = "mtd_dataflash", +- .max_speed_hz = 10000000, ++ .max_speed_hz = 8000000, + .chip_select = 0, }, }; @@ -50,4865 +149,8692 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32. /* * The next two functions should go away as the boot loader is * supposed to initialize the macb address registers with a valid -@@ -100,8 +108,46 @@ - at32_setup_serial_console(0); - } +@@ -124,6 +136,7 @@ + } + }; -+static const struct gpio_led ngw_leds[] = { -+ { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1, -+ .default_trigger = "heartbeat", -+ }, -+ { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, }, -+ { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, }, -+}; -+ -+static const struct gpio_led_platform_data ngw_led_data = { -+ .num_leds = ARRAY_SIZE(ngw_leds), -+ .leds = (void *) ngw_leds, -+}; -+ -+static struct platform_device ngw_gpio_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = (void *) &ngw_led_data, -+ } -+}; -+ +#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO -+static struct i2c_gpio_platform_data i2c_gpio_data = { -+ .sda_pin = GPIO_PIN_PA(6), -+ .scl_pin = GPIO_PIN_PA(7), -+}; -+ -+static struct platform_device i2c_gpio_device = { -+ .name = "i2c-gpio", -+ .id = 0, -+ .dev = { -+ .platform_data = &i2c_gpio_data, -+ }, -+}; + static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PIN_PA(6), + .scl_pin = GPIO_PIN_PA(7), +@@ -139,6 +152,7 @@ + .platform_data = &i2c_gpio_data, + }, + }; +#endif -+ + static int __init atngw100_init(void) { -+ unsigned i; -+ - /* - * ATNGW100 uses 16-bit SDRAM interface, so we don't need to - * reserve any pins for it. -@@ -115,6 +161,22 @@ +@@ -157,6 +171,7 @@ set_hw_addr(at32_add_device_eth(1, ð_data[1])); at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); + at32_add_device_mci(0, &mci0_data); -+ at32_add_device_usba(0, NULL); -+ -+ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { -+ at32_select_gpio(ngw_leds[i].gpio, -+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); -+ } -+ platform_device_register(&ngw_gpio_leds); -+ + at32_add_device_usba(0, NULL); + + for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { +@@ -165,11 +180,15 @@ + } + platform_device_register(&ngw_gpio_leds); + +#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO -+ at32_select_gpio(i2c_gpio_data.sda_pin, 0); -+ at32_select_gpio(i2c_gpio_data.scl_pin, 0); -+ platform_device_register(&i2c_gpio_device); + at32_select_gpio(i2c_gpio_data.sda_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(i2c_gpio_data.scl_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + platform_device_register(&i2c_gpio_device); +#else -+ at32_add_device_twi(0); ++ at32_add_device_twi(0, NULL, 0); +#endif return 0; } -diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c linux-avr32.git/arch/avr32/boards/atstk1000/atstk1002.c ---- linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/boards/atstk1000/atstk1002.c 2007-07-12 13:59:49.000000000 +0200 -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -27,7 +28,6 @@ +--- a/arch/avr32/boards/atstk1000/Kconfig ++++ b/arch/avr32/boards/atstk1000/Kconfig +@@ -18,6 +18,10 @@ + bool "ATSTK1004" + select CPU_AT32AP7002 - #include "atstk1000.h" ++config BOARD_ATSTK1006 ++ bool "ATSTK1006" ++ select CPU_AT32AP7000 ++ + endchoice --#define SW2_DEFAULT /* MMCI and UART_A available */ - struct eth_addr { - u8 addr[6]; -@@ -36,6 +36,7 @@ - static struct eth_addr __initdata hw_addr[2]; - static struct eth_platform_data __initdata eth_data[2]; +@@ -102,4 +106,60 @@ + depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM + default y -+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM - static struct spi_board_info spi0_board_info[] __initdata = { - { - /* QVGA display */ -@@ -45,6 +46,18 @@ - .mode = SPI_MODE_3, - }, - }; -+#endif ++config BOARD_ATSTK100X_ENABLE_AC97 ++ bool "Use AC97C instead of ABDAC" ++ help ++ Select this if you want to use the built-in AC97 controller ++ instead of the built-in Audio Bitstream DAC. These share ++ the same I/O pins on the AP7000, so both can't be enabled ++ at the same time. ++ ++ Note that the STK1000 kit doesn't ship with an AC97 codec on ++ board, so say N unless you've got an expansion board with an ++ AC97 codec on it that you want to use. ++ ++config BOARD_ATSTK1000_CF_HACKS ++ bool "ATSTK1000 CompactFlash hacks" ++ depends on !BOARD_ATSTK100X_SW4_CUSTOM ++ help ++ Select this if you have re-routed the CompactFlash RESET and ++ CD signals to GPIOs on your STK1000. This is necessary for ++ reset and card detection to work properly, although some CF ++ cards may be able to cope without reset. ++ ++config BOARD_ATSTK1000_CF_RESET_PIN ++ hex "CompactFlash RESET pin" ++ default 0x30 ++ depends on BOARD_ATSTK1000_CF_HACKS ++ help ++ Select which GPIO pin to use for the CompactFlash RESET ++ signal. This is specified as a hexadecimal number and should ++ be defined as 0x20 * gpio_port + pin. + -+#ifdef CONFIG_BOARD_ATSTK1002_SPI1 -+static struct spi_board_info spi1_board_info[] __initdata = { { -+ /* patch in custom entries here */ -+} }; -+#endif ++ The default is 0x30, which is pin 16 on PIOB, aka GPIO14. + -+static struct mci_platform_data __initdata mci0_data = { -+ .detect_pin = GPIO_PIN_NONE, -+ .wp_pin = GPIO_PIN_NONE, -+}; - ++config BOARD_ATSTK1000_CF_DETECT_PIN ++ hex "CompactFlash DETECT pin" ++ default 0x3e ++ depends on BOARD_ATSTK1000_CF_HACKS ++ help ++ Select which GPIO pin to use for the CompactFlash CD ++ signal. This is specified as a hexadecimal number and should ++ be defined as 0x20 * gpio_port + pin. ++ ++ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15. ++ ++config BOARD_ATSTK100X_ENABLE_PSIF ++ bool "Enable PSIF peripheral (PS/2 support)" ++ default n ++ help ++ Select this if you want to use the PSIF peripheral to hook up PS/2 ++ devices to your STK1000. This will require a hardware modification to ++ work correctly, since PS/2 devices require 5 volt power and signals, ++ while the STK1000 only provides 3.3 volt. ++ ++ Say N if you have not modified the hardware to boost the voltage, say ++ Y if you have level convertion hardware or a PS/2 device capable of ++ operating on 3.3 volt. ++ + endif # stk 1000 +--- a/arch/avr32/boards/atstk1000/Makefile ++++ b/arch/avr32/boards/atstk1000/Makefile +@@ -2,3 +2,4 @@ + obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o + obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o + obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o ++obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o +--- a/arch/avr32/boards/atstk1000/atstk1002.c ++++ b/arch/avr32/boards/atstk1000/atstk1002.c +@@ -1,7 +1,7 @@ /* - * The next two functions should go away as the boot loader is -@@ -101,12 +114,71 @@ - clk_put(pclk); - } +- * ATSTK1002 daughterboard-specific init code ++ * ATSTK1002/ATSTK1006 daughterboard-specific init code + * +- * Copyright (C) 2005-2006 Atmel Corporation ++ * Copyright (C) 2005-2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +@@ -28,6 +28,80 @@ --void __init setup_board(void) -+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED -+ -+static struct gpio_led stk_j2_led[] = { -+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8 -+#define LEDSTRING "J2 jumpered to LED8" -+ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), }, -+ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), }, -+ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), }, -+ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), }, -+ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), }, -+ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), }, -+ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), }, -+ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30), -+ .default_trigger = "heartbeat", }, -+#else /* RGB */ -+#define LEDSTRING "J2 jumpered to RGB LEDs" -+ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), }, -+ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), }, -+ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), }, -+ -+ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9), -+ .default_trigger = "heartbeat", }, -+ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), }, -+ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15), -+ .default_trigger = "heartbeat", }, -+ /* PB16, PB30 unused */ -+#endif + #include "atstk1000.h" + ++/* Oscillator frequencies. These are board specific */ ++unsigned long at32_board_osc_rates[3] = { ++ [0] = 32768, /* 32.768 kHz on RTC osc */ ++ [1] = 20000000, /* 20 MHz on osc0 */ ++ [2] = 12000000, /* 12 MHz on osc1 */ +}; + -+static struct gpio_led_platform_data stk_j2_led_data = { -+ .num_leds = ARRAY_SIZE(stk_j2_led), -+ .leds = stk_j2_led, ++/* ++ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both ++ * have the AT32AP7000 chip on board; the difference is that the ++ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on ++ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has ++ * none.) ++ * ++ * The RAM difference is handled by the boot loader, so the only ++ * difference we end up handling here is the NAND flash. ++ */ ++#ifdef CONFIG_BOARD_ATSTK1006 ++#include ++#include ++ ++static struct smc_timing nand_timing __initdata = { ++ .ncs_read_setup = 0, ++ .nrd_setup = 10, ++ .ncs_write_setup = 0, ++ .nwe_setup = 10, ++ ++ .ncs_read_pulse = 30, ++ .nrd_pulse = 15, ++ .ncs_write_pulse = 30, ++ .nwe_pulse = 15, ++ ++ .read_cycle = 30, ++ .write_cycle = 30, ++ ++ .ncs_read_recover = 0, ++ .nrd_recover = 15, ++ .ncs_write_recover = 0, ++ /* WE# high -> RE# low min 60 ns */ ++ .nwe_recover = 50, +}; + -+static struct platform_device stk_j2_led_dev = { -+ .name = "leds-gpio", -+ .id = 2, /* gpio block J2 */ -+ .dev = { -+ .platform_data = &stk_j2_led_data, -+ }, ++static struct smc_config nand_config __initdata = { ++ .bus_width = 1, ++ .nrd_controlled = 1, ++ .nwe_controlled = 1, ++ .nwait_mode = 0, ++ .byte_write = 0, ++ .tdf_cycles = 2, ++ .tdf_mode = 0, +}; + -+static void setup_j2_leds(void) - { --#ifdef SW2_DEFAULT -- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -+ unsigned i; -+ -+ for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++) -+ at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT); -+ -+ printk("STK1002: " LEDSTRING "\n"); -+ platform_device_register(&stk_j2_led_dev); -+} ++static struct mtd_partition nand_partitions[] = { ++ { ++ .name = "main", ++ .offset = 0x00000000, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; + - #else -+static void setup_j2_leds(void) ++static struct mtd_partition *nand_part_info(int size, int *num_partitions) +{ ++ *num_partitions = ARRAY_SIZE(nand_partitions); ++ return nand_partitions; +} -+#endif + -+void __init setup_board(void) -+{ -+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM - at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ -+#else -+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ ++static struct atmel_nand_data atstk1006_nand_data __initdata = { ++ .cle = 21, ++ .ale = 22, ++ .rdy_pin = GPIO_PIN_PB(30), ++ .enable_pin = GPIO_PIN_PB(29), ++ .partition_info = nand_part_info, ++}; ++#endif + + struct eth_addr { + u8 addr[6]; +@@ -83,6 +157,19 @@ + } }; #endif - /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ -@@ -140,18 +212,40 @@ + ++static struct cf_platform_data __initdata cf0_data = { ++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS ++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN, ++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN, ++#else ++ .detect_pin = GPIO_PIN_NONE, ++ .reset_pin = GPIO_PIN_NONE, ++#endif ++ .vcc_pin = GPIO_PIN_NONE, ++ .ready_pin = GPIO_PIN_PB(27), ++ .cs = 4, ++}; ++ + /* + * The next two functions should go away as the boot loader is + * supposed to initialize the macb address registers with a valid +@@ -212,6 +299,12 @@ at32_add_system_devices(); --#ifdef SW2_DEFAULT -- at32_add_device_usart(0); --#else -+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM ++#ifdef CONFIG_BOARD_ATSTK1006 ++ smc_set_timing(&nand_config, &nand_timing); ++ smc_set_configuration(3, &nand_config); ++ at32_add_device_nand(0, &atstk1006_nand_data); ++#endif ++ + #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_usart(1); -+#else -+ at32_add_device_usart(0); + #else +@@ -228,16 +321,30 @@ + #ifdef CONFIG_BOARD_ATSTK100X_SPI1 + at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif - at32_add_device_usart(2); - -+#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM - set_hw_addr(at32_add_device_eth(0, ð_data[0])); -- -- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); ++ at32_add_device_twi(0, NULL, 0); ++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM ++ at32_add_device_mci(0, NULL); +#endif -+#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM -+ set_hw_addr(at32_add_device_eth(1, ð_data[1])); -+#else + #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM + set_hw_addr(at32_add_device_eth(1, ð_data[1])); + #else at32_add_device_lcdc(0, &atstk1000_lcdc_data, - fbmem_start, fbmem_size); +- fbmem_start, fbmem_size); ++ fbmem_start, fbmem_size, 0); + #endif + at32_add_device_usba(0, NULL); ++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97 ++ at32_add_device_ac97c(0, NULL); ++#else ++ at32_add_device_abdac(0); +#endif + #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM + at32_add_device_ssc(0, ATMEL_SSC_TX); + #endif ++ at32_add_device_cf(0, 2, &cf0_data); ++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF ++ at32_add_device_psif(0); ++ at32_add_device_psif(1); ++#endif + + atstk1000_setup_j2_leds(); + atstk1002_setup_extdac(); +--- a/arch/avr32/boards/atstk1000/atstk1003.c ++++ b/arch/avr32/boards/atstk1000/atstk1003.c +@@ -27,6 +27,13 @@ + + #include "atstk1000.h" + ++/* Oscillator frequencies. These are board specific */ ++unsigned long at32_board_osc_rates[3] = { ++ [0] = 32768, /* 32.768 kHz on RTC osc */ ++ [1] = 20000000, /* 20 MHz on osc0 */ ++ [2] = 12000000, /* 12 MHz on osc1 */ ++}; + -+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM -+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC + static struct at73c213_board_info at73c213_data = { + .ssc_id = 0, +@@ -59,6 +66,19 @@ + } }; + #endif + ++static struct cf_platform_data __initdata cf0_data = { ++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS ++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN, ++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN, ++#else ++ .detect_pin = GPIO_PIN_NONE, ++ .reset_pin = GPIO_PIN_NONE, +#endif -+#ifdef CONFIG_BOARD_ATSTK1002_SPI1 -+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); ++ .vcc_pin = GPIO_PIN_NONE, ++ .ready_pin = GPIO_PIN_PB(27), ++ .cs = 4, ++}; ++ + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC + static void __init atstk1003_setup_extdac(void) + { +@@ -147,12 +167,22 @@ + at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); + #endif + #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +- at32_add_device_mci(0); ++ at32_add_device_mci(0, NULL); + #endif + at32_add_device_usba(0, NULL); ++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97 ++ at32_add_device_ac97c(0, NULL); ++#else ++ at32_add_device_abdac(0); +#endif -+ at32_add_device_twi(0); -+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM -+ at32_add_device_mci(0, &mci0_data); + #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM + at32_add_device_ssc(0, ATMEL_SSC_TX); + #endif ++ at32_add_device_cf(0, 2, &cf0_data); ++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF ++ at32_add_device_psif(0); ++ at32_add_device_psif(1); +#endif -+ at32_add_device_usba(0, NULL); + + atstk1000_setup_j2_leds(); + atstk1003_setup_extdac(); +--- a/arch/avr32/boards/atstk1000/atstk1004.c ++++ b/arch/avr32/boards/atstk1000/atstk1004.c +@@ -29,6 +29,13 @@ + + #include "atstk1000.h" + ++/* Oscillator frequencies. These are board specific */ ++unsigned long at32_board_osc_rates[3] = { ++ [0] = 32768, /* 32.768 kHz on RTC osc */ ++ [1] = 20000000, /* 20 MHz on osc0 */ ++ [2] = 12000000, /* 12 MHz on osc1 */ ++}; ++ + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC + static struct at73c213_board_info at73c213_data = { + .ssc_id = 0, +@@ -130,14 +137,23 @@ + at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); + #endif + #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +- at32_add_device_mci(0); ++ at32_add_device_mci(0, NULL); + #endif + at32_add_device_lcdc(0, &atstk1000_lcdc_data, +- fbmem_start, fbmem_size); ++ fbmem_start, fbmem_size, 0); + at32_add_device_usba(0, NULL); ++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97 ++ at32_add_device_ac97c(0, NULL); ++#else + at32_add_device_abdac(0); -+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM -+ at32_add_device_ssc(0, ATMEL_SSC_TX); +#endif -+ -+ setup_j2_leds(); + #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM + at32_add_device_ssc(0, ATMEL_SSC_TX); + #endif ++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF ++ at32_add_device_psif(0); ++ at32_add_device_psif(1); ++#endif - return 0; - } -diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig linux-avr32.git/arch/avr32/boards/atstk1000/Kconfig ---- linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/arch/avr32/boards/atstk1000/Kconfig 2007-07-12 13:59:49.000000000 +0200 -@@ -0,0 +1,79 @@ -+# STK1000 customization -+ -+if BOARD_ATSTK1002 -+ -+config BOARD_ATSTK1002_CUSTOM -+ bool "Non-default STK-1002 jumper settings" -+ help -+ You will normally leave the jumpers on the CPU card at their -+ default settings. If you need to use certain peripherals, -+ you will need to change some of those jumpers. -+ -+if BOARD_ATSTK1002_CUSTOM -+ -+config BOARD_ATSTK1002_SW1_CUSTOM -+ bool "SW1: use SSC1 (not SPI0)" -+ help -+ This also prevents using the external DAC as an audio interface, -+ and means you can't initialize the on-board QVGA display. -+ -+config BOARD_ATSTK1002_SW2_CUSTOM -+ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)" -+ help -+ If you change this you'll want an updated boot loader putting -+ the console on UART-C not UART-A. -+ -+config BOARD_ATSTK1002_SW3_CUSTOM -+ bool "SW3: use TIMER1 (not SSC0 and GCLK)" -+ help -+ This also prevents using the external DAC as an audio interface. -+ -+config BOARD_ATSTK1002_SW4_CUSTOM -+ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)" -+ help -+ To use the camera interface you'll need a custom card (on the -+ PCI-format connector) connect a video sensor. -+ -+config BOARD_ATSTK1002_SW5_CUSTOM -+ bool "SW5: use MACB1 (not LCDC)" -+ -+config BOARD_ATSTK1002_SW6_CUSTOM -+ bool "SW6: more GPIOs (not MACB0)" -+ -+endif # custom -+ -+config BOARD_ATSTK1002_SPI1 -+ bool "Configure SPI1 controller" -+ depends on !BOARD_ATSTK1002_SW4_CUSTOM -+ help -+ All the signals for the second SPI controller are available on -+ GPIO lines and accessed through the J1 jumper block. Say "y" -+ here to configure that SPI controller. -+ -+config BOARD_ATSTK1002_J2_LED -+ bool -+ default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB -+ -+choice -+ prompt "LEDs connected to J2:" -+ depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM -+ optional -+ help -+ Select this if you have jumpered the J2 jumper block to the -+ LED0..LED7 amber leds, or to the RGB leds, using a ten-pin -+ IDC cable. A default "heartbeat" trigger is provided, but -+ you can of course override this. -+ -+config BOARD_ATSTK1002_J2_LED8 -+ bool "LED0..LED7" -+ help -+ Select this if J2 is jumpered to LED0..LED7 amber leds. -+ -+config BOARD_ATSTK1002_J2_RGB -+ bool "RGB leds" -+ help -+ Select this if J2 is jumpered to the RGB leds. -+ -+endchoice -+ -+endif # stk 1002 -diff -x .git -Nur linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig linux-avr32.git/arch/avr32/configs/atngw100_defconfig ---- linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/configs/atngw100_defconfig 2007-07-13 11:24:16.000000000 +0200 + atstk1000_setup_j2_leds(); + atstk1004_setup_extdac(); +--- a/arch/avr32/configs/atngw100_defconfig ++++ b/arch/avr32/configs/atngw100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit --# Linux kernel version: 2.6.22-rc5 --# Sat Jun 23 15:40:05 2007 -+# Linux kernel version: 2.6.22.atmel.1 -+# Thu Jul 12 17:49:20 2007 +-# Linux kernel version: 2.6.24-rc7 +-# Wed Jan 9 23:20:41 2008 ++# Linux kernel version: 2.6.25.4 ++# Wed Jun 11 15:23:36 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y -@@ -114,6 +114,7 @@ +@@ -13,10 +13,10 @@ + CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y + CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y + # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set + # CONFIG_ARCH_HAS_ILOG2_U32 is not set + # CONFIG_ARCH_HAS_ILOG2_U64 is not set +-CONFIG_ARCH_SUPPORTS_OPROFILE=y + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y + CONFIG_GENERIC_BUG=y +@@ -37,17 +37,15 @@ + CONFIG_BSD_PROCESS_ACCT=y + CONFIG_BSD_PROCESS_ACCT_V3=y + # CONFIG_TASKSTATS is not set +-# CONFIG_USER_NS is not set +-# CONFIG_PID_NS is not set + # CONFIG_AUDIT is not set + # CONFIG_IKCONFIG is not set + CONFIG_LOG_BUF_SHIFT=14 + # CONFIG_CGROUPS is not set +-CONFIG_FAIR_GROUP_SCHED=y +-CONFIG_FAIR_USER_SCHED=y +-# CONFIG_FAIR_CGROUP_SCHED is not set ++# CONFIG_GROUP_SCHED is not set + CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y + # CONFIG_RELAY is not set ++# CONFIG_NAMESPACES is not set + CONFIG_BLK_DEV_INITRD=y + CONFIG_INITRAMFS_SOURCE="" + CONFIG_CC_OPTIMIZE_FOR_SIZE=y +@@ -61,11 +59,13 @@ + CONFIG_PRINTK=y + CONFIG_BUG=y + CONFIG_ELF_CORE=y ++# CONFIG_COMPAT_BRK is not set + # CONFIG_BASE_FULL is not set + CONFIG_FUTEX=y + CONFIG_ANON_INODES=y + CONFIG_EPOLL=y + CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y + CONFIG_EVENTFD=y + CONFIG_SHMEM=y + CONFIG_VM_EVENT_COUNTERS=y +@@ -73,6 +73,14 @@ + # CONFIG_SLAB is not set + CONFIG_SLUB=y + # CONFIG_SLOB is not set ++CONFIG_PROFILING=y ++# CONFIG_MARKERS is not set ++CONFIG_OPROFILE=m ++CONFIG_HAVE_OPROFILE=y ++CONFIG_KPROBES=y ++CONFIG_HAVE_KPROBES=y ++# CONFIG_HAVE_KRETPROBES is not set ++CONFIG_PROC_PAGE_MONITOR=y + CONFIG_SLABINFO=y + CONFIG_RT_MUTEXES=y + # CONFIG_TINY_SHMEM is not set +@@ -101,10 +109,15 @@ + CONFIG_DEFAULT_CFQ=y + # CONFIG_DEFAULT_NOOP is not set + CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y + + # + # System Type and features + # ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + CONFIG_SUBARCH_AVR32B=y + CONFIG_MMU=y + CONFIG_PERFORMANCE_COUNTERS=y +@@ -113,6 +126,7 @@ CONFIG_CPU_AT32AP7000=y # CONFIG_BOARD_ATSTK1000 is not set CONFIG_BOARD_ATNGW100=y -+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set ++CONFIG_BOARD_ATNGW100_I2C_GPIO=y CONFIG_LOADER_U_BOOT=y # -@@ -122,6 +123,7 @@ - # CONFIG_AP7000_32_BIT_SMC is not set - CONFIG_AP7000_16_BIT_SMC=y - # CONFIG_AP7000_8_BIT_SMC is not set +@@ -121,6 +135,7 @@ + # CONFIG_AP700X_32_BIT_SMC is not set + CONFIG_AP700X_16_BIT_SMC=y + # CONFIG_AP700X_8_BIT_SMC is not set +CONFIG_GPIO_DEV=y CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 -@@ -145,6 +147,7 @@ - # CONFIG_RESOURCES_64BIT is not set +@@ -146,16 +161,26 @@ CONFIG_ZONE_DMA_FLAG=0 + CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set ++CONFIG_NMI_DEBUGGING=y +CONFIG_DW_DMAC=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set -@@ -153,6 +156,27 @@ + # CONFIG_HZ_1000 is not set + CONFIG_HZ=250 ++# CONFIG_SCHED_HRTICK is not set CONFIG_CMDLINE="" # -+# Power managment options -+# -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+CONFIG_CPU_FREQ_STAT=m -+# CONFIG_CPU_FREQ_STAT_DETAILS is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+CONFIG_CPU_FREQ_GOV_POWERSAVE=y -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# - # Bus options + # Power management options # - # CONFIG_ARCH_SUPPORTS_MSI is not set -@@ -187,13 +211,8 @@ ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_PM=y ++# CONFIG_PM_LEGACY is not set ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y + + # + # CPU Frequency scaling +@@ -164,9 +189,9 @@ + CONFIG_CPU_FREQ_TABLE=y + # CONFIG_CPU_FREQ_DEBUG is not set + # CONFIG_CPU_FREQ_STAT is not set +-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set + # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set ++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y + # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set + CONFIG_CPU_FREQ_GOV_PERFORMANCE=y + # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +@@ -202,6 +227,7 @@ + CONFIG_XFRM_USER=y + # CONFIG_XFRM_SUB_POLICY is not set + # CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set + CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y - CONFIG_IP_MULTICAST=y --CONFIG_IP_ADVANCED_ROUTER=y --CONFIG_ASK_IP_FIB_HASH=y --# CONFIG_IP_FIB_TRIE is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set - CONFIG_IP_FIB_HASH=y --# CONFIG_IP_MULTIPLE_TABLES is not set --# CONFIG_IP_ROUTE_MULTIPATH is not set --# CONFIG_IP_ROUTE_VERBOSE is not set - CONFIG_IP_PNP=y - CONFIG_IP_PNP_DHCP=y - # CONFIG_IP_PNP_BOOTP is not set -@@ -240,6 +259,7 @@ +@@ -260,82 +286,33 @@ # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set -+CONFIG_BRIDGE_NETFILTER=y +-CONFIG_BRIDGE_NETFILTER=y ++# CONFIG_NETFILTER_ADVANCED is not set # # Core Netfilter Configuration -@@ -284,6 +304,7 @@ + # +-# CONFIG_NETFILTER_NETLINK is not set +-CONFIG_NF_CONNTRACK_ENABLED=m ++CONFIG_NETFILTER_NETLINK=m ++CONFIG_NETFILTER_NETLINK_LOG=m + CONFIG_NF_CONNTRACK=m +-CONFIG_NF_CT_ACCT=y +-CONFIG_NF_CONNTRACK_MARK=y +-# CONFIG_NF_CONNTRACK_EVENTS is not set +-CONFIG_NF_CT_PROTO_GRE=m +-# CONFIG_NF_CT_PROTO_SCTP is not set +-# CONFIG_NF_CT_PROTO_UDPLITE is not set +-CONFIG_NF_CONNTRACK_AMANDA=m + CONFIG_NF_CONNTRACK_FTP=m +-CONFIG_NF_CONNTRACK_H323=m + CONFIG_NF_CONNTRACK_IRC=m +-CONFIG_NF_CONNTRACK_NETBIOS_NS=m +-CONFIG_NF_CONNTRACK_PPTP=m +-CONFIG_NF_CONNTRACK_SANE=m + CONFIG_NF_CONNTRACK_SIP=m +-CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m + CONFIG_NETFILTER_XTABLES=y +-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set + CONFIG_NETFILTER_XT_TARGET_MARK=m +-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m + CONFIG_NETFILTER_XT_TARGET_NFLOG=m +-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set + CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +-CONFIG_NETFILTER_XT_MATCH_COMMENT=m +-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m + CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +-CONFIG_NETFILTER_XT_MATCH_ESP=m +-CONFIG_NETFILTER_XT_MATCH_HELPER=m +-CONFIG_NETFILTER_XT_MATCH_LENGTH=m +-CONFIG_NETFILTER_XT_MATCH_LIMIT=m +-CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m - CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set - CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m - CONFIG_NETFILTER_XT_MATCH_QUOTA=m - CONFIG_NETFILTER_XT_MATCH_REALM=m -@@ -359,13 +380,19 @@ - CONFIG_IP6_NF_MANGLE=m - CONFIG_IP6_NF_TARGET_HL=m - CONFIG_IP6_NF_RAW=m -+ -+# -+# Bridge: Netfilter Configuration -+# -+# CONFIG_BRIDGE_NF_EBTABLES is not set - # CONFIG_IP_DCCP is not set - # CONFIG_IP_SCTP is not set - # CONFIG_TIPC is not set - # CONFIG_ATM is not set --# CONFIG_BRIDGE is not set -+CONFIG_BRIDGE=m - CONFIG_VLAN_8021Q=m - # CONFIG_DECNET is not set -+CONFIG_LLC=m - # CONFIG_LLC2 is not set - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -@@ -521,7 +548,6 @@ +-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +-CONFIG_NETFILTER_XT_MATCH_QUOTA=m +-CONFIG_NETFILTER_XT_MATCH_REALM=m +-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set + CONFIG_NETFILTER_XT_MATCH_STATE=m +-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +-CONFIG_NETFILTER_XT_MATCH_STRING=m +-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +-# CONFIG_NETFILTER_XT_MATCH_TIME is not set +-# CONFIG_NETFILTER_XT_MATCH_U32 is not set +-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + # - # Misc devices + # IP: Netfilter Configuration # --# CONFIG_BLINK is not set - # CONFIG_IDE is not set + CONFIG_NF_CONNTRACK_IPV4=m + CONFIG_NF_CONNTRACK_PROC_COMPAT=y +-# CONFIG_IP_NF_QUEUE is not set + CONFIG_IP_NF_IPTABLES=m +-CONFIG_IP_NF_MATCH_IPRANGE=m +-CONFIG_IP_NF_MATCH_TOS=m +-CONFIG_IP_NF_MATCH_RECENT=m +-CONFIG_IP_NF_MATCH_ECN=m +-CONFIG_IP_NF_MATCH_AH=m +-CONFIG_IP_NF_MATCH_TTL=m +-CONFIG_IP_NF_MATCH_OWNER=m +-CONFIG_IP_NF_MATCH_ADDRTYPE=m + CONFIG_IP_NF_FILTER=m + CONFIG_IP_NF_TARGET_REJECT=m + CONFIG_IP_NF_TARGET_LOG=m +@@ -343,54 +320,25 @@ + CONFIG_NF_NAT=m + CONFIG_NF_NAT_NEEDED=y + CONFIG_IP_NF_TARGET_MASQUERADE=m +-CONFIG_IP_NF_TARGET_REDIRECT=m +-CONFIG_IP_NF_TARGET_NETMAP=m +-CONFIG_IP_NF_TARGET_SAME=m +-CONFIG_NF_NAT_SNMP_BASIC=m +-CONFIG_NF_NAT_PROTO_GRE=m + CONFIG_NF_NAT_FTP=m + CONFIG_NF_NAT_IRC=m +-CONFIG_NF_NAT_TFTP=m +-CONFIG_NF_NAT_AMANDA=m +-CONFIG_NF_NAT_PPTP=m +-CONFIG_NF_NAT_H323=m ++# CONFIG_NF_NAT_TFTP is not set ++# CONFIG_NF_NAT_AMANDA is not set ++# CONFIG_NF_NAT_PPTP is not set ++# CONFIG_NF_NAT_H323 is not set + CONFIG_NF_NAT_SIP=m + CONFIG_IP_NF_MANGLE=m +-CONFIG_IP_NF_TARGET_TOS=m +-CONFIG_IP_NF_TARGET_ECN=m +-CONFIG_IP_NF_TARGET_TTL=m +-CONFIG_IP_NF_TARGET_CLUSTERIP=m +-CONFIG_IP_NF_RAW=m +-CONFIG_IP_NF_ARPTABLES=m +-CONFIG_IP_NF_ARPFILTER=m +-CONFIG_IP_NF_ARP_MANGLE=m # -@@ -545,13 +571,26 @@ - # CONFIG_BONDING is not set - # CONFIG_EQUALIZER is not set - CONFIG_TUN=m --# CONFIG_PHYLIB is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_FIXED_PHY is not set +-# IPv6: Netfilter Configuration (EXPERIMENTAL) ++# IPv6: Netfilter Configuration + # + CONFIG_NF_CONNTRACK_IPV6=m +-CONFIG_IP6_NF_QUEUE=m + CONFIG_IP6_NF_IPTABLES=m +-CONFIG_IP6_NF_MATCH_RT=m +-CONFIG_IP6_NF_MATCH_OPTS=m +-CONFIG_IP6_NF_MATCH_FRAG=m +-CONFIG_IP6_NF_MATCH_HL=m +-CONFIG_IP6_NF_MATCH_OWNER=m + CONFIG_IP6_NF_MATCH_IPV6HEADER=m +-CONFIG_IP6_NF_MATCH_AH=m +-CONFIG_IP6_NF_MATCH_MH=m +-CONFIG_IP6_NF_MATCH_EUI64=m + CONFIG_IP6_NF_FILTER=m + CONFIG_IP6_NF_TARGET_LOG=m + CONFIG_IP6_NF_TARGET_REJECT=m + CONFIG_IP6_NF_MANGLE=m +-CONFIG_IP6_NF_TARGET_HL=m +-CONFIG_IP6_NF_RAW=m +- +-# +-# Bridge: Netfilter Configuration +-# +-# CONFIG_BRIDGE_NF_EBTABLES is not set + # CONFIG_IP_DCCP is not set + # CONFIG_IP_SCTP is not set + # CONFIG_TIPC is not set +@@ -407,7 +355,6 @@ + # CONFIG_ECONET is not set + # CONFIG_WAN_ROUTER is not set + # CONFIG_NET_SCHED is not set +-CONFIG_NET_CLS_ROUTE=y # - # Ethernet (10 or 100Mbit) + # Network testing +@@ -415,6 +362,7 @@ + # CONFIG_NET_PKTGEN is not set + # CONFIG_NET_TCPPROBE is not set + # CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set + # CONFIG_IRDA is not set + # CONFIG_BT is not set + # CONFIG_AF_RXRPC is not set +@@ -531,11 +479,18 @@ + CONFIG_BLK_DEV_RAM=m + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_BLK_DEV_RAM_SIZE=4096 +-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_BLK_DEV_XIP is not set + # CONFIG_CDROM_PKTCDVD is not set + # CONFIG_ATA_OVER_ETH is not set +-# CONFIG_MISC_DEVICES is not set +-# CONFIG_IDE is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_ATMEL_PWM is not set ++CONFIG_ATMEL_TCLIB=y ++CONFIG_ATMEL_TCB_CLKSRC=y ++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ATMEL_SSC is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_HAVE_IDE is not set + # + # SCSI device support +@@ -568,11 +523,13 @@ + # CONFIG_SMSC_PHY is not set + # CONFIG_BROADCOM_PHY is not set + # CONFIG_ICPLUS_PHY is not set ++# CONFIG_REALTEK_PHY is not set + # CONFIG_FIXED_PHY is not set + # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y --CONFIG_MII=y -+# CONFIG_MII is not set + # CONFIG_MII is not set CONFIG_MACB=y - # CONFIG_NETDEV_1000 is not set - # CONFIG_NETDEV_10000 is not set -@@ -625,7 +664,15 @@ - # IPMI ++# CONFIG_ENC28J60 is not set + # CONFIG_IBM_NEW_EMAC_ZMII is not set + # CONFIG_IBM_NEW_EMAC_RGMII is not set + # CONFIG_IBM_NEW_EMAC_TAH is not set +@@ -599,7 +556,6 @@ + # CONFIG_PPPOL2TP is not set + # CONFIG_SLIP is not set + CONFIG_SLHC=m +-# CONFIG_SHAPER is not set + # CONFIG_NETCONSOLE is not set + # CONFIG_NETPOLL is not set + # CONFIG_NET_POLL_CONTROLLER is not set +@@ -633,6 +589,7 @@ # + CONFIG_SERIAL_ATMEL=y + CONFIG_SERIAL_ATMEL_CONSOLE=y ++CONFIG_SERIAL_ATMEL_PDC=y + # CONFIG_SERIAL_ATMEL_TTYAT is not set + CONFIG_SERIAL_CORE=y + CONFIG_SERIAL_CORE_CONSOLE=y +@@ -640,8 +597,6 @@ + # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set --# CONFIG_WATCHDOG is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+CONFIG_AT32AP700X_WDT_TIMEOUT=2 # CONFIG_HW_RANDOM is not set - # CONFIG_RTC is not set - # CONFIG_GEN_RTC is not set -@@ -636,7 +683,42 @@ - # TPM devices - # +-# CONFIG_RTC is not set +-# CONFIG_GEN_RTC is not set + # CONFIG_R3964 is not set + # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set --# CONFIG_I2C is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m +@@ -659,6 +614,7 @@ + # + # I2C Hardware Bus support + # ++CONFIG_I2C_ATMELTWI=m + CONFIG_I2C_GPIO=m + # CONFIG_I2C_OCORES is not set + # CONFIG_I2C_PARPORT_LIGHT is not set +@@ -669,13 +625,12 @@ + # + # Miscellaneous I2C Chip support + # +-# CONFIG_SENSORS_DS1337 is not set +-# CONFIG_SENSORS_DS1374 is not set + # CONFIG_DS1682 is not set + # CONFIG_SENSORS_EEPROM is not set + # CONFIG_SENSORS_PCF8574 is not set +-# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_PCF8575 is not set + # CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set + # CONFIG_SENSORS_MAX6875 is not set + # CONFIG_SENSORS_TSL2550 is not set + # CONFIG_I2C_DEBUG_CORE is not set +@@ -702,9 +657,27 @@ + # CONFIG_SPI_AT25 is not set + CONFIG_SPI_SPIDEV=m + # CONFIG_SPI_TLE62X0 is not set ++CONFIG_HAVE_GPIO_LIB=y + +# -+# I2C Algorithms ++# GPIO Support +# -+CONFIG_I2C_ALGOBIT=m -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set ++# CONFIG_DEBUG_GPIO is not set + +# -+# I2C Hardware Bus support ++# I2C GPIO expanders: +# -+CONFIG_I2C_ATMELTWI=m -+CONFIG_I2C_ATMELTWI_BAUDRATE=100000 -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_STUB is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set + +# -+# Miscellaneous I2C Chip support ++# SPI GPIO expanders: +# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set - ++# CONFIG_GPIO_MCP23S08 is not set + # CONFIG_W1 is not set + # CONFIG_POWER_SUPPLY is not set + # CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set + CONFIG_WATCHDOG=y + # CONFIG_WATCHDOG_NOWAYOUT is not set + +@@ -757,10 +730,6 @@ # - # SPI support -@@ -655,7 +737,7 @@ - # SPI Protocol Masters + # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - # CONFIG_SPI_AT25 is not set --# CONFIG_SPI_SPIDEV is not set -+CONFIG_SPI_SPIDEV=m +- +-# +-# USB Gadget Support +-# + CONFIG_USB_GADGET=y + # CONFIG_USB_GADGET_DEBUG is not set + # CONFIG_USB_GADGET_DEBUG_FILES is not set +@@ -787,21 +756,24 @@ + # CONFIG_USB_FILE_STORAGE_TEST is not set + CONFIG_USB_G_SERIAL=m + # CONFIG_USB_MIDI_GADGET is not set +-CONFIG_MMC=m ++# CONFIG_USB_G_PRINTER is not set ++CONFIG_MMC=y + # CONFIG_MMC_DEBUG is not set + # CONFIG_MMC_UNSAFE_RESUME is not set # - # Dallas's 1-wire bus -@@ -706,21 +788,59 @@ - # - # USB Gadget Support + # MMC/SD Card Drivers # --# CONFIG_USB_GADGET is not set --# CONFIG_MMC is not set -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# +-CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK=y -+ -+# -+# MMC/SD Host Controller Drivers -+# -+CONFIG_MMC_ATMELMCI=y + CONFIG_MMC_BLOCK_BOUNCE=y + # CONFIG_SDIO_UART is not set # - # LED devices + # MMC/SD Host Controller Drivers # --# CONFIG_NEW_LEDS is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y ++CONFIG_MMC_ATMELMCI=y + CONFIG_MMC_SPI=m ++# CONFIG_MEMSTICK is not set + CONFIG_NEW_LEDS=y + CONFIG_LEDS_CLASS=y - # - # LED drivers - # -+CONFIG_LEDS_GPIO=y +@@ -844,19 +816,22 @@ + # CONFIG_RTC_DRV_PCF8563 is not set + # CONFIG_RTC_DRV_PCF8583 is not set + # CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set # - # LED Triggers + # SPI RTC drivers # -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y +-# CONFIG_RTC_DRV_RS5C348 is not set + # CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set # - # InfiniBand support -@@ -733,7 +853,51 @@ + # Platform RTC drivers # - # Real Time Clock ++# CONFIG_RTC_DRV_DS1511 is not set + # CONFIG_RTC_DRV_DS1553 is not set +-# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_M48T86 is not set + # CONFIG_RTC_DRV_M48T59 is not set + # CONFIG_RTC_DRV_V3020 is not set +@@ -874,25 +849,23 @@ # --# CONFIG_RTC_CLASS is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT32AP700X=y - + # File systems # - # DMA Engine support -@@ -767,7 +931,8 @@ +-CONFIG_EXT2_FS=m ++CONFIG_EXT2_FS=y + # CONFIG_EXT2_FS_XATTR is not set + # CONFIG_EXT2_FS_XIP is not set +-CONFIG_EXT3_FS=m ++CONFIG_EXT3_FS=y + # CONFIG_EXT3_FS_XATTR is not set + # CONFIG_EXT4DEV_FS is not set +-CONFIG_JBD=m ++CONFIG_JBD=y + # CONFIG_REISERFS_FS is not set + # CONFIG_JFS_FS is not set + # CONFIG_FS_POSIX_ACL is not set + # CONFIG_XFS_FS is not set + # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set - # CONFIG_MINIX_FS is not set - # CONFIG_ROMFS_FS is not set --# CONFIG_INOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y +-# CONFIG_MINIX_FS is not set +-# CONFIG_ROMFS_FS is not set ++# CONFIG_DNOTIFY is not set + CONFIG_INOTIFY=y + CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set - # CONFIG_DNOTIFY is not set +-# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set -@@ -922,7 +1087,7 @@ - CONFIG_ENABLE_MUST_CHECK=y - CONFIG_MAGIC_SYSRQ=y - # CONFIG_UNUSED_SYMBOLS is not set --# CONFIG_DEBUG_FS is not set -+CONFIG_DEBUG_FS=y - # CONFIG_HEADERS_CHECK is not set - CONFIG_DEBUG_KERNEL=y - # CONFIG_DEBUG_SHIRQ is not set -diff -x .git -Nur linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig linux-avr32.git/arch/avr32/configs/atstk1002_defconfig ---- linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/configs/atstk1002_defconfig 2007-07-13 11:24:16.000000000 +0200 + # CONFIG_AUTOFS4_FS is not set + CONFIG_FUSE_FS=m +@@ -923,7 +896,7 @@ + CONFIG_TMPFS=y + # CONFIG_TMPFS_POSIX_ACL is not set + # CONFIG_HUGETLB_PAGE is not set +-CONFIG_CONFIGFS_FS=m ++CONFIG_CONFIGFS_FS=y + + # + # Miscellaneous filesystems +@@ -948,8 +921,10 @@ + # CONFIG_JFFS2_RUBIN is not set + # CONFIG_CRAMFS is not set + # CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set + # CONFIG_HPFS_FS is not set + # CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set + # CONFIG_SYSV_FS is not set + # CONFIG_UFS_FS is not set + CONFIG_NETWORK_FILESYSTEMS=y +@@ -1030,11 +1005,6 @@ + # CONFIG_NLS_KOI8_U is not set + CONFIG_NLS_UTF8=m + # CONFIG_DLM is not set +-CONFIG_INSTRUMENTATION=y +-CONFIG_PROFILING=y +-CONFIG_OPROFILE=m +-CONFIG_KPROBES=y +-# CONFIG_MARKERS is not set + + # + # Kernel hacking +@@ -1053,6 +1023,7 @@ + # CONFIG_SCHEDSTATS is not set + # CONFIG_TIMER_STATS is not set + # CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set + # CONFIG_DEBUG_RT_MUTEXES is not set + # CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set +@@ -1069,9 +1040,10 @@ + # CONFIG_DEBUG_LIST is not set + # CONFIG_DEBUG_SG is not set + CONFIG_FRAME_POINTER=y +-# CONFIG_FORCED_INLINING is not set + # CONFIG_BOOT_PRINTK_DELAY is not set + # CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_KPROBES_SANITY_TEST is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set + # CONFIG_LKDTM is not set + # CONFIG_FAULT_INJECTION is not set + # CONFIG_SAMPLES is not set +@@ -1084,7 +1056,9 @@ + # CONFIG_SECURITY_FILE_CAPABILITIES is not set + CONFIG_CRYPTO=y + CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_AEAD=y + CONFIG_CRYPTO_BLKCIPHER=y ++# CONFIG_CRYPTO_SEQIV is not set + CONFIG_CRYPTO_HASH=y + CONFIG_CRYPTO_MANAGER=y + CONFIG_CRYPTO_HMAC=y +@@ -1103,6 +1077,9 @@ + CONFIG_CRYPTO_PCBC=m + # CONFIG_CRYPTO_LRW is not set + # CONFIG_CRYPTO_XTS is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_CCM is not set + # CONFIG_CRYPTO_CRYPTD is not set + CONFIG_CRYPTO_DES=y + # CONFIG_CRYPTO_FCRYPT is not set +@@ -1117,12 +1094,14 @@ + # CONFIG_CRYPTO_KHAZAD is not set + # CONFIG_CRYPTO_ANUBIS is not set + # CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SALSA20 is not set + CONFIG_CRYPTO_DEFLATE=y + # CONFIG_CRYPTO_MICHAEL_MIC is not set + # CONFIG_CRYPTO_CRC32C is not set + # CONFIG_CRYPTO_CAMELLIA is not set + # CONFIG_CRYPTO_TEST is not set +-# CONFIG_CRYPTO_AUTHENC is not set ++CONFIG_CRYPTO_AUTHENC=y ++# CONFIG_CRYPTO_LZO is not set + CONFIG_CRYPTO_HW=y + + # +@@ -1137,10 +1116,7 @@ + # CONFIG_LIBCRC32C is not set + CONFIG_ZLIB_INFLATE=y + CONFIG_ZLIB_DEFLATE=y +-CONFIG_TEXTSEARCH=y +-CONFIG_TEXTSEARCH_KMP=m +-CONFIG_TEXTSEARCH_BM=m +-CONFIG_TEXTSEARCH_FSM=m ++CONFIG_GENERIC_ALLOCATOR=y + CONFIG_PLIST=y + CONFIG_HAS_IOMEM=y + CONFIG_HAS_IOPORT=y +--- a/arch/avr32/configs/atstk1002_defconfig ++++ b/arch/avr32/configs/atstk1002_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit --# Linux kernel version: 2.6.22-rc5 --# Sat Jun 23 15:32:08 2007 -+# Linux kernel version: 2.6.22.atmel.1 -+# Thu Jul 12 19:34:17 2007 +-# Linux kernel version: 2.6.24-rc7 +-# Wed Jan 9 23:07:43 2008 ++# Linux kernel version: 2.6.25.4 ++# Wed Jun 11 15:29:18 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y -@@ -80,10 +80,10 @@ - # - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y --# CONFIG_MODULE_FORCE_UNLOAD is not set -+CONFIG_MODULE_FORCE_UNLOAD=y - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set --# CONFIG_KMOD is not set -+CONFIG_KMOD=y - - # - # Block layer -@@ -99,12 +99,12 @@ - CONFIG_IOSCHED_NOOP=y - # CONFIG_IOSCHED_AS is not set - # CONFIG_IOSCHED_DEADLINE is not set --# CONFIG_IOSCHED_CFQ is not set -+CONFIG_IOSCHED_CFQ=y - # CONFIG_DEFAULT_AS is not set - # CONFIG_DEFAULT_DEADLINE is not set --# CONFIG_DEFAULT_CFQ is not set --CONFIG_DEFAULT_NOOP=y --CONFIG_DEFAULT_IOSCHED="noop" -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" +@@ -13,10 +13,10 @@ + CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y + CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y + # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set + # CONFIG_ARCH_HAS_ILOG2_U32 is not set + # CONFIG_ARCH_HAS_ILOG2_U64 is not set +-CONFIG_ARCH_SUPPORTS_OPROFILE=y + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y + CONFIG_GENERIC_BUG=y +@@ -36,15 +36,15 @@ + CONFIG_POSIX_MQUEUE=y + # CONFIG_BSD_PROCESS_ACCT is not set + # CONFIG_TASKSTATS is not set +-# CONFIG_USER_NS is not set +-# CONFIG_PID_NS is not set + # CONFIG_AUDIT is not set + # CONFIG_IKCONFIG is not set + CONFIG_LOG_BUF_SHIFT=14 + # CONFIG_CGROUPS is not set +-# CONFIG_FAIR_GROUP_SCHED is not set ++# CONFIG_GROUP_SCHED is not set + CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y + CONFIG_RELAY=y ++# CONFIG_NAMESPACES is not set + CONFIG_BLK_DEV_INITRD=y + CONFIG_INITRAMFS_SOURCE="" + CONFIG_CC_OPTIMIZE_FOR_SIZE=y +@@ -58,11 +58,13 @@ + CONFIG_PRINTK=y + CONFIG_BUG=y + CONFIG_ELF_CORE=y ++# CONFIG_COMPAT_BRK is not set + # CONFIG_BASE_FULL is not set + CONFIG_FUTEX=y + CONFIG_ANON_INODES=y + CONFIG_EPOLL=y + CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y + CONFIG_EVENTFD=y + CONFIG_SHMEM=y + CONFIG_VM_EVENT_COUNTERS=y +@@ -70,6 +72,14 @@ + # CONFIG_SLAB is not set + CONFIG_SLUB=y + # CONFIG_SLOB is not set ++CONFIG_PROFILING=y ++# CONFIG_MARKERS is not set ++CONFIG_OPROFILE=m ++CONFIG_HAVE_OPROFILE=y ++CONFIG_KPROBES=y ++CONFIG_HAVE_KPROBES=y ++# CONFIG_HAVE_KRETPROBES is not set ++CONFIG_PROC_PAGE_MONITOR=y + CONFIG_SLABINFO=y + CONFIG_RT_MUTEXES=y + # CONFIG_TINY_SHMEM is not set +@@ -98,10 +108,15 @@ + CONFIG_DEFAULT_CFQ=y + # CONFIG_DEFAULT_NOOP is not set + CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y # # System Type and features -@@ -117,6 +117,11 @@ + # ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + CONFIG_SUBARCH_AVR32B=y + CONFIG_MMU=y + CONFIG_PERFORMANCE_COUNTERS=y +@@ -113,12 +128,16 @@ CONFIG_BOARD_ATSTK1002=y - CONFIG_BOARD_ATSTK1000=y - # CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set -+# CONFIG_BOARD_ATSTK1002_SPI1 is not set -+# CONFIG_BOARD_ATSTK1002_J2_LED is not set -+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set -+# CONFIG_BOARD_ATSTK1002_J2_RGB is not set + # CONFIG_BOARD_ATSTK1003 is not set + # CONFIG_BOARD_ATSTK1004 is not set ++# CONFIG_BOARD_ATSTK1006 is not set + # CONFIG_BOARD_ATSTK100X_CUSTOM is not set + # CONFIG_BOARD_ATSTK100X_SPI1 is not set + # CONFIG_BOARD_ATSTK1000_J2_LED is not set + # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set + # CONFIG_BOARD_ATSTK1000_J2_RGB is not set + CONFIG_BOARD_ATSTK1000_EXTDAC=y ++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set ++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set ++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set CONFIG_LOADER_U_BOOT=y # -@@ -125,6 +130,7 @@ - # CONFIG_AP7000_32_BIT_SMC is not set - CONFIG_AP7000_16_BIT_SMC=y - # CONFIG_AP7000_8_BIT_SMC is not set +@@ -127,6 +146,7 @@ + # CONFIG_AP700X_32_BIT_SMC is not set + CONFIG_AP700X_16_BIT_SMC=y + # CONFIG_AP700X_8_BIT_SMC is not set +CONFIG_GPIO_DEV=y CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 -@@ -148,6 +154,7 @@ - # CONFIG_RESOURCES_64BIT is not set +@@ -152,16 +172,26 @@ CONFIG_ZONE_DMA_FLAG=0 + CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set ++CONFIG_NMI_DEBUGGING=y +CONFIG_DW_DMAC=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set -@@ -156,6 +163,27 @@ + # CONFIG_HZ_1000 is not set + CONFIG_HZ=250 ++# CONFIG_SCHED_HRTICK is not set CONFIG_CMDLINE="" # -+# Power managment options + # Power management options + # ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_PM=y ++# CONFIG_PM_LEGACY is not set ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y + + # + # CPU Frequency scaling +@@ -170,9 +200,9 @@ + CONFIG_CPU_FREQ_TABLE=y + # CONFIG_CPU_FREQ_DEBUG is not set + # CONFIG_CPU_FREQ_STAT is not set +-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set + # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set ++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y + # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set + CONFIG_CPU_FREQ_GOV_PERFORMANCE=y + # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +@@ -208,6 +238,7 @@ + CONFIG_XFRM_USER=m + # CONFIG_XFRM_SUB_POLICY is not set + # CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set + CONFIG_NET_KEY=m + # CONFIG_NET_KEY_MIGRATE is not set + CONFIG_INET=y +@@ -279,6 +310,7 @@ + # CONFIG_NET_PKTGEN is not set + # CONFIG_NET_TCPPROBE is not set + # CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set + # CONFIG_IRDA is not set + # CONFIG_BT is not set + # CONFIG_AF_RXRPC is not set +@@ -395,13 +427,18 @@ + CONFIG_BLK_DEV_RAM=m + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_BLK_DEV_RAM_SIZE=4096 +-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_BLK_DEV_XIP is not set + # CONFIG_CDROM_PKTCDVD is not set + # CONFIG_ATA_OVER_ETH is not set + CONFIG_MISC_DEVICES=y ++CONFIG_ATMEL_PWM=m ++CONFIG_ATMEL_TCLIB=y ++CONFIG_ATMEL_TCB_CLKSRC=y ++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 + # CONFIG_EEPROM_93CX6 is not set + CONFIG_ATMEL_SSC=m +-# CONFIG_IDE is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_HAVE_IDE is not set + + # + # SCSI device support +@@ -444,6 +481,7 @@ + # CONFIG_SCSI_LOWLEVEL is not set + CONFIG_ATA=m + # CONFIG_ATA_NONSTANDARD is not set ++# CONFIG_SATA_MV is not set + CONFIG_PATA_AT32=m + # CONFIG_PATA_PLATFORM is not set + # CONFIG_MD is not set +@@ -469,11 +507,13 @@ + # CONFIG_SMSC_PHY is not set + # CONFIG_BROADCOM_PHY is not set + # CONFIG_ICPLUS_PHY is not set ++# CONFIG_REALTEK_PHY is not set + # CONFIG_FIXED_PHY is not set + # CONFIG_MDIO_BITBANG is not set + CONFIG_NET_ETHERNET=y + # CONFIG_MII is not set + CONFIG_MACB=y ++# CONFIG_ENC28J60 is not set + # CONFIG_IBM_NEW_EMAC_ZMII is not set + # CONFIG_IBM_NEW_EMAC_RGMII is not set + # CONFIG_IBM_NEW_EMAC_TAH is not set +@@ -500,7 +540,6 @@ + # CONFIG_PPPOL2TP is not set + # CONFIG_SLIP is not set + CONFIG_SLHC=m +-# CONFIG_SHAPER is not set + # CONFIG_NETCONSOLE is not set + # CONFIG_NETPOLL is not set + # CONFIG_NET_POLL_CONTROLLER is not set +@@ -568,6 +607,7 @@ + # + CONFIG_SERIAL_ATMEL=y + CONFIG_SERIAL_ATMEL_CONSOLE=y ++CONFIG_SERIAL_ATMEL_PDC=y + # CONFIG_SERIAL_ATMEL_TTYAT is not set + CONFIG_SERIAL_CORE=y + CONFIG_SERIAL_CORE_CONSOLE=y +@@ -575,8 +615,6 @@ + # CONFIG_LEGACY_PTYS is not set + # CONFIG_IPMI_HANDLER is not set + # CONFIG_HW_RANDOM is not set +-# CONFIG_RTC is not set +-# CONFIG_GEN_RTC is not set + # CONFIG_R3964 is not set + # CONFIG_RAW_DRIVER is not set + # CONFIG_TCG_TPM is not set +@@ -594,6 +632,7 @@ + # + # I2C Hardware Bus support + # ++CONFIG_I2C_ATMELTWI=m + CONFIG_I2C_GPIO=m + # CONFIG_I2C_OCORES is not set + # CONFIG_I2C_PARPORT_LIGHT is not set +@@ -604,13 +643,12 @@ + # + # Miscellaneous I2C Chip support + # +-# CONFIG_SENSORS_DS1337 is not set +-# CONFIG_SENSORS_DS1374 is not set + # CONFIG_DS1682 is not set + # CONFIG_SENSORS_EEPROM is not set + # CONFIG_SENSORS_PCF8574 is not set +-# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_PCF8575 is not set + # CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set + # CONFIG_SENSORS_MAX6875 is not set + # CONFIG_SENSORS_TSL2550 is not set + # CONFIG_I2C_DEBUG_CORE is not set +@@ -637,9 +675,27 @@ + # CONFIG_SPI_AT25 is not set + CONFIG_SPI_SPIDEV=m + # CONFIG_SPI_TLE62X0 is not set ++CONFIG_HAVE_GPIO_LIB=y ++ +# ++# GPIO Support ++# ++# CONFIG_DEBUG_GPIO is not set + +# -+# CPU Frequency scaling ++# I2C GPIO expanders: +# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+CONFIG_CPU_FREQ_STAT=m -+# CONFIG_CPU_FREQ_STAT_DETAILS is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+CONFIG_CPU_FREQ_GOV_POWERSAVE=y -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set + +# - # Bus options ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MCP23S08 is not set + # CONFIG_W1 is not set + # CONFIG_POWER_SUPPLY is not set + # CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set + CONFIG_WATCHDOG=y + # CONFIG_WATCHDOG_NOWAYOUT is not set + +@@ -732,12 +788,18 @@ # - # CONFIG_ARCH_SUPPORTS_MSI is not set -@@ -327,6 +355,8 @@ + # Generic devices # - # Self-contained MTD device drivers ++CONFIG_SND_AC97_CODEC=m + # CONFIG_SND_DUMMY is not set + # CONFIG_SND_MTPAV is not set + # CONFIG_SND_SERIAL_U16550 is not set + # CONFIG_SND_MPU401 is not set + # -+CONFIG_MTD_DATAFLASH=m -+# CONFIG_MTD_M25P80 is not set - # CONFIG_MTD_SLRAM is not set - # CONFIG_MTD_PHRAM is not set - # CONFIG_MTD_MTDRAM is not set -@@ -373,7 +403,6 @@ ++# AVR32 devices ++# ++CONFIG_SND_ATMEL_AC97=m ++ ++# + # SPI devices # - # Misc devices + CONFIG_SND_AT73C213=m +@@ -753,9 +815,14 @@ # --# CONFIG_BLINK is not set - # CONFIG_IDE is not set # -@@ -397,13 +426,26 @@ - # CONFIG_BONDING is not set - # CONFIG_EQUALIZER is not set - CONFIG_TUN=m --# CONFIG_PHYLIB is not set -+CONFIG_PHYLIB=y -+ ++# ALSA SoC audio for Freescale SOCs +# -+# MII PHY device drivers ++ +# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+CONFIG_LXT_PHY=y -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_FIXED_PHY is not set + # Open Sound System + # + # CONFIG_SOUND_PRIME is not set ++CONFIG_AC97_BUS=m + # CONFIG_HID_SUPPORT is not set + CONFIG_USB_SUPPORT=y + # CONFIG_USB_ARCH_HAS_HCD is not set +@@ -765,10 +832,6 @@ + # + # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' + # +- +-# +-# USB Gadget Support +-# + CONFIG_USB_GADGET=y + # CONFIG_USB_GADGET_DEBUG is not set + # CONFIG_USB_GADGET_DEBUG_FILES is not set +@@ -796,27 +859,31 @@ + # CONFIG_USB_FILE_STORAGE_TEST is not set + CONFIG_USB_G_SERIAL=m + # CONFIG_USB_MIDI_GADGET is not set +-CONFIG_MMC=m ++# CONFIG_USB_G_PRINTER is not set ++CONFIG_MMC=y + # CONFIG_MMC_DEBUG is not set + # CONFIG_MMC_UNSAFE_RESUME is not set # - # Ethernet (10 or 100Mbit) + # MMC/SD Card Drivers # - CONFIG_NET_ETHERNET=y --CONFIG_MII=y -+# CONFIG_MII is not set - CONFIG_MACB=y - # CONFIG_NETDEV_1000 is not set - # CONFIG_NETDEV_10000 is not set -@@ -443,7 +485,42 @@ +-CONFIG_MMC_BLOCK=m ++CONFIG_MMC_BLOCK=y + CONFIG_MMC_BLOCK_BOUNCE=y + # CONFIG_SDIO_UART is not set + # - # Input device support + # MMC/SD Host Controller Drivers # --# CONFIG_INPUT is not set -+CONFIG_INPUT=m -+# CONFIG_INPUT_FF_MEMLESS is not set -+CONFIG_INPUT_POLLDEV=m -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=m -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+CONFIG_MOUSE_GPIO=m -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set ++CONFIG_MMC_ATMELMCI=y + CONFIG_MMC_SPI=m ++# CONFIG_MEMSTICK is not set + CONFIG_NEW_LEDS=y + CONFIG_LEDS_CLASS=m # - # Hardware I/O ports -@@ -477,7 +554,15 @@ - # IPMI + # LED drivers # - # CONFIG_IPMI_HANDLER is not set --# CONFIG_WATCHDOG is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+CONFIG_AT32AP700X_WDT_TIMEOUT=2 - # CONFIG_HW_RANDOM is not set - # CONFIG_RTC is not set - # CONFIG_GEN_RTC is not set -@@ -488,13 +573,61 @@ - # TPM devices ++CONFIG_LEDS_ATMEL_PWM=m + CONFIG_LEDS_GPIO=m + # - # CONFIG_TCG_TPM is not set --# CONFIG_I2C is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=m -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_ATMELTWI=m -+CONFIG_I2C_ATMELTWI_BAUDRATE=100000 -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set +@@ -853,19 +920,22 @@ + # CONFIG_RTC_DRV_PCF8563 is not set + # CONFIG_RTC_DRV_PCF8583 is not set + # CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set # - # SPI support + # SPI RTC drivers # --# CONFIG_SPI is not set --# CONFIG_SPI_MASTER is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+CONFIG_SPI_SPIDEV=m +-# CONFIG_RTC_DRV_RS5C348 is not set + # CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set # - # Dallas's 1-wire bus -@@ -517,14 +650,40 @@ - # - # Graphics support + # Platform RTC drivers # --# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+CONFIG_LCD_LTV350QV=y -+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set - ++# CONFIG_RTC_DRV_DS1511 is not set + # CONFIG_RTC_DRV_DS1553 is not set +-# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_M48T86 is not set + # CONFIG_RTC_DRV_M48T59 is not set + # CONFIG_RTC_DRV_V3020 is not set +@@ -883,13 +953,13 @@ # - # Display device support + # File systems # - # CONFIG_DISPLAY_SUPPORT is not set - # CONFIG_VGASTATE is not set --# CONFIG_FB is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_LOGO is not set +-CONFIG_EXT2_FS=m ++CONFIG_EXT2_FS=y + # CONFIG_EXT2_FS_XATTR is not set + # CONFIG_EXT2_FS_XIP is not set +-CONFIG_EXT3_FS=m ++CONFIG_EXT3_FS=y + # CONFIG_EXT3_FS_XATTR is not set + # CONFIG_EXT4DEV_FS is not set +-CONFIG_JBD=m ++CONFIG_JBD=y + # CONFIG_JBD_DEBUG is not set + # CONFIG_REISERFS_FS is not set + # CONFIG_JFS_FS is not set +@@ -897,12 +967,10 @@ + # CONFIG_XFS_FS is not set + # CONFIG_GFS2_FS is not set + # CONFIG_OCFS2_FS is not set +-CONFIG_MINIX_FS=m +-# CONFIG_ROMFS_FS is not set ++# CONFIG_DNOTIFY is not set + CONFIG_INOTIFY=y + CONFIG_INOTIFY_USER=y + # CONFIG_QUOTA is not set +-# CONFIG_DNOTIFY is not set + # CONFIG_AUTOFS_FS is not set + # CONFIG_AUTOFS4_FS is not set + CONFIG_FUSE_FS=m +@@ -933,7 +1001,7 @@ + CONFIG_TMPFS=y + # CONFIG_TMPFS_POSIX_ACL is not set + # CONFIG_HUGETLB_PAGE is not set +-# CONFIG_CONFIGFS_FS is not set ++CONFIG_CONFIGFS_FS=y # - # Sound -@@ -532,6 +691,11 @@ - # CONFIG_SOUND is not set + # Miscellaneous filesystems +@@ -957,8 +1025,10 @@ + # CONFIG_JFFS2_RUBIN is not set + # CONFIG_CRAMFS is not set + # CONFIG_VXFS_FS is not set ++CONFIG_MINIX_FS=m + # CONFIG_HPFS_FS is not set + # CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set + # CONFIG_SYSV_FS is not set + # CONFIG_UFS_FS is not set + CONFIG_NETWORK_FILESYSTEMS=y +@@ -1028,11 +1098,6 @@ + # CONFIG_NLS_KOI8_U is not set + CONFIG_NLS_UTF8=m + # CONFIG_DLM is not set +-CONFIG_INSTRUMENTATION=y +-CONFIG_PROFILING=y +-CONFIG_OPROFILE=m +-CONFIG_KPROBES=y +-# CONFIG_MARKERS is not set # -+# HID Devices -+# -+# CONFIG_HID is not set -+ -+# - # USB support + # Kernel hacking +@@ -1051,6 +1116,7 @@ + # CONFIG_SCHEDSTATS is not set + # CONFIG_TIMER_STATS is not set + # CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set + # CONFIG_DEBUG_RT_MUTEXES is not set + # CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set +@@ -1067,9 +1133,10 @@ + # CONFIG_DEBUG_LIST is not set + # CONFIG_DEBUG_SG is not set + CONFIG_FRAME_POINTER=y +-CONFIG_FORCED_INLINING=y + # CONFIG_BOOT_PRINTK_DELAY is not set + # CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_KPROBES_SANITY_TEST is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set + # CONFIG_LKDTM is not set + # CONFIG_FAULT_INJECTION is not set + # CONFIG_SAMPLES is not set +@@ -1082,7 +1149,9 @@ + # CONFIG_SECURITY_FILE_CAPABILITIES is not set + CONFIG_CRYPTO=y + CONFIG_CRYPTO_ALGAPI=m ++CONFIG_CRYPTO_AEAD=m + CONFIG_CRYPTO_BLKCIPHER=m ++# CONFIG_CRYPTO_SEQIV is not set + CONFIG_CRYPTO_HASH=m + CONFIG_CRYPTO_MANAGER=m + CONFIG_CRYPTO_HMAC=m +@@ -1101,6 +1170,9 @@ + # CONFIG_CRYPTO_PCBC is not set + # CONFIG_CRYPTO_LRW is not set + # CONFIG_CRYPTO_XTS is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_CCM is not set + # CONFIG_CRYPTO_CRYPTD is not set + CONFIG_CRYPTO_DES=m + # CONFIG_CRYPTO_FCRYPT is not set +@@ -1115,12 +1187,14 @@ + # CONFIG_CRYPTO_KHAZAD is not set + # CONFIG_CRYPTO_ANUBIS is not set + # CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SALSA20 is not set + CONFIG_CRYPTO_DEFLATE=m + # CONFIG_CRYPTO_MICHAEL_MIC is not set + # CONFIG_CRYPTO_CRC32C is not set + # CONFIG_CRYPTO_CAMELLIA is not set + # CONFIG_CRYPTO_TEST is not set +-# CONFIG_CRYPTO_AUTHENC is not set ++CONFIG_CRYPTO_AUTHENC=m ++# CONFIG_CRYPTO_LZO is not set + # CONFIG_CRYPTO_HW is not set + # - # CONFIG_USB_ARCH_HAS_HCD is not set -@@ -545,21 +709,59 @@ +@@ -1135,6 +1209,7 @@ + # CONFIG_LIBCRC32C is not set + CONFIG_ZLIB_INFLATE=y + CONFIG_ZLIB_DEFLATE=y ++CONFIG_GENERIC_ALLOCATOR=y + CONFIG_PLIST=y + CONFIG_HAS_IOMEM=y + CONFIG_HAS_IOPORT=y +--- a/arch/avr32/configs/atstk1003_defconfig ++++ b/arch/avr32/configs/atstk1003_defconfig +@@ -1,7 +1,7 @@ # - # USB Gadget Support + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.24-rc7 +-# Wed Jan 9 22:54:34 2008 ++# Linux kernel version: 2.6.25.4 ++# Wed Jun 11 15:33:36 2008 # --# CONFIG_USB_GADGET is not set --# CONFIG_MMC is not set -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+ -+# -+# MMC/SD Host Controller Drivers -+# -+CONFIG_MMC_ATMELMCI=y + CONFIG_AVR32=y + CONFIG_GENERIC_GPIO=y +@@ -13,10 +13,10 @@ + CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y + CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y + # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set + # CONFIG_ARCH_HAS_ILOG2_U32 is not set + # CONFIG_ARCH_HAS_ILOG2_U64 is not set +-CONFIG_ARCH_SUPPORTS_OPROFILE=y + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y + CONFIG_GENERIC_BUG=y +@@ -39,17 +39,15 @@ + CONFIG_TASKSTATS=y + CONFIG_TASK_DELAY_ACCT=y + # CONFIG_TASK_XACCT is not set +-# CONFIG_USER_NS is not set +-# CONFIG_PID_NS is not set + CONFIG_AUDIT=y + # CONFIG_IKCONFIG is not set + CONFIG_LOG_BUF_SHIFT=14 + # CONFIG_CGROUPS is not set +-CONFIG_FAIR_GROUP_SCHED=y +-CONFIG_FAIR_USER_SCHED=y +-# CONFIG_FAIR_CGROUP_SCHED is not set ++# CONFIG_GROUP_SCHED is not set + CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y + CONFIG_RELAY=y ++# CONFIG_NAMESPACES is not set + CONFIG_BLK_DEV_INITRD=y + CONFIG_INITRAMFS_SOURCE="" + CONFIG_CC_OPTIMIZE_FOR_SIZE=y +@@ -63,11 +61,13 @@ + CONFIG_PRINTK=y + CONFIG_BUG=y + CONFIG_ELF_CORE=y ++# CONFIG_COMPAT_BRK is not set + # CONFIG_BASE_FULL is not set + CONFIG_FUTEX=y + CONFIG_ANON_INODES=y + CONFIG_EPOLL=y + CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y + CONFIG_EVENTFD=y + CONFIG_SHMEM=y + CONFIG_VM_EVENT_COUNTERS=y +@@ -75,6 +75,14 @@ + # CONFIG_SLAB is not set + CONFIG_SLUB=y + # CONFIG_SLOB is not set ++CONFIG_PROFILING=y ++# CONFIG_MARKERS is not set ++CONFIG_OPROFILE=m ++CONFIG_HAVE_OPROFILE=y ++CONFIG_KPROBES=y ++CONFIG_HAVE_KPROBES=y ++# CONFIG_HAVE_KRETPROBES is not set ++CONFIG_PROC_PAGE_MONITOR=y + CONFIG_SLABINFO=y + CONFIG_RT_MUTEXES=y + # CONFIG_TINY_SHMEM is not set +@@ -103,10 +111,15 @@ + CONFIG_DEFAULT_CFQ=y + # CONFIG_DEFAULT_NOOP is not set + CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y # - # LED devices + # System Type and features # --# CONFIG_NEW_LEDS is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=m ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + CONFIG_SUBARCH_AVR32B=y + CONFIG_MMU=y + CONFIG_PERFORMANCE_COUNTERS=y +@@ -118,12 +131,16 @@ + # CONFIG_BOARD_ATSTK1002 is not set + CONFIG_BOARD_ATSTK1003=y + # CONFIG_BOARD_ATSTK1004 is not set ++# CONFIG_BOARD_ATSTK1006 is not set + # CONFIG_BOARD_ATSTK100X_CUSTOM is not set + # CONFIG_BOARD_ATSTK100X_SPI1 is not set + # CONFIG_BOARD_ATSTK1000_J2_LED is not set + # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set + # CONFIG_BOARD_ATSTK1000_J2_RGB is not set + CONFIG_BOARD_ATSTK1000_EXTDAC=y ++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set ++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set ++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set + CONFIG_LOADER_U_BOOT=y # - # LED drivers - # -+CONFIG_LEDS_GPIO=m +@@ -132,6 +149,7 @@ + # CONFIG_AP700X_32_BIT_SMC is not set + CONFIG_AP700X_16_BIT_SMC=y + # CONFIG_AP700X_8_BIT_SMC is not set ++CONFIG_GPIO_DEV=y + CONFIG_LOAD_ADDRESS=0x10000000 + CONFIG_ENTRY_ADDRESS=0x90000000 + CONFIG_PHYS_OFFSET=0x10000000 +@@ -157,16 +175,26 @@ + CONFIG_ZONE_DMA_FLAG=0 + CONFIG_VIRT_TO_BUS=y + # CONFIG_OWNERSHIP_TRACE is not set ++CONFIG_NMI_DEBUGGING=y ++CONFIG_DW_DMAC=y + # CONFIG_HZ_100 is not set + CONFIG_HZ_250=y + # CONFIG_HZ_300 is not set + # CONFIG_HZ_1000 is not set + CONFIG_HZ=250 ++# CONFIG_SCHED_HRTICK is not set + CONFIG_CMDLINE="" # - # LED Triggers + # Power management options # -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=m -+CONFIG_LEDS_TRIGGER_HEARTBEAT=m ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_PM=y ++# CONFIG_PM_LEGACY is not set ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y # - # InfiniBand support -@@ -572,7 +774,50 @@ + # CPU Frequency scaling +@@ -175,9 +203,9 @@ + CONFIG_CPU_FREQ_TABLE=y + # CONFIG_CPU_FREQ_DEBUG is not set + # CONFIG_CPU_FREQ_STAT is not set +-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set + # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set ++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y + # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set + CONFIG_CPU_FREQ_GOV_PERFORMANCE=y + # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +@@ -260,6 +288,7 @@ + # CONFIG_NET_PKTGEN is not set + # CONFIG_NET_TCPPROBE is not set + # CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set + # CONFIG_IRDA is not set + # CONFIG_BT is not set + # CONFIG_AF_RXRPC is not set +@@ -376,13 +405,18 @@ + CONFIG_BLK_DEV_RAM=m + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_BLK_DEV_RAM_SIZE=4096 +-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_BLK_DEV_XIP is not set + # CONFIG_CDROM_PKTCDVD is not set + # CONFIG_ATA_OVER_ETH is not set + CONFIG_MISC_DEVICES=y ++CONFIG_ATMEL_PWM=m ++CONFIG_ATMEL_TCLIB=y ++CONFIG_ATMEL_TCB_CLKSRC=y ++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 + # CONFIG_EEPROM_93CX6 is not set + CONFIG_ATMEL_SSC=m +-# CONFIG_IDE is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_HAVE_IDE is not set + # - # Real Time Clock + # SCSI device support +@@ -427,6 +461,7 @@ + # CONFIG_SCSI_DEBUG is not set + CONFIG_ATA=m + # CONFIG_ATA_NONSTANDARD is not set ++# CONFIG_SATA_MV is not set + CONFIG_PATA_AT32=m + # CONFIG_PATA_PLATFORM is not set + # CONFIG_MD is not set +@@ -460,7 +495,6 @@ + # CONFIG_PPPOL2TP is not set + # CONFIG_SLIP is not set + CONFIG_SLHC=m +-# CONFIG_SHAPER is not set + # CONFIG_NETCONSOLE is not set + # CONFIG_NETPOLL is not set + # CONFIG_NET_POLL_CONTROLLER is not set +@@ -528,6 +562,7 @@ # --# CONFIG_RTC_CLASS is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+# CONFIG_RTC_HCTOSYS is not set -+# CONFIG_RTC_DEBUG is not set + CONFIG_SERIAL_ATMEL=y + CONFIG_SERIAL_ATMEL_CONSOLE=y ++CONFIG_SERIAL_ATMEL_PDC=y + # CONFIG_SERIAL_ATMEL_TTYAT is not set + CONFIG_SERIAL_CORE=y + CONFIG_SERIAL_CORE_CONSOLE=y +@@ -535,8 +570,6 @@ + # CONFIG_LEGACY_PTYS is not set + # CONFIG_IPMI_HANDLER is not set + # CONFIG_HW_RANDOM is not set +-# CONFIG_RTC is not set +-# CONFIG_GEN_RTC is not set + # CONFIG_R3964 is not set + # CONFIG_RAW_DRIVER is not set + # CONFIG_TCG_TPM is not set +@@ -554,6 +587,7 @@ + # + # I2C Hardware Bus support + # ++CONFIG_I2C_ATMELTWI=m + CONFIG_I2C_GPIO=m + # CONFIG_I2C_OCORES is not set + # CONFIG_I2C_PARPORT_LIGHT is not set +@@ -564,13 +598,12 @@ + # + # Miscellaneous I2C Chip support + # +-# CONFIG_SENSORS_DS1337 is not set +-# CONFIG_SENSORS_DS1374 is not set + # CONFIG_DS1682 is not set + # CONFIG_SENSORS_EEPROM is not set + # CONFIG_SENSORS_PCF8574 is not set +-# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_PCF8575 is not set + # CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set + # CONFIG_SENSORS_MAX6875 is not set + # CONFIG_SENSORS_TSL2550 is not set + # CONFIG_I2C_DEBUG_CORE is not set +@@ -597,9 +630,27 @@ + # CONFIG_SPI_AT25 is not set + CONFIG_SPI_SPIDEV=m + # CONFIG_SPI_TLE62X0 is not set ++CONFIG_HAVE_GPIO_LIB=y + +# -+# RTC interfaces ++# GPIO Support +# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set ++# CONFIG_DEBUG_GPIO is not set + +# -+# I2C RTC drivers ++# I2C GPIO expanders: +# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set + +# -+# SPI RTC drivers ++# SPI GPIO expanders: +# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_GPIO_MCP23S08 is not set + # CONFIG_W1 is not set + # CONFIG_POWER_SUPPLY is not set + # CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set + CONFIG_WATCHDOG=y + # CONFIG_WATCHDOG_NOWAYOUT is not set + +@@ -665,12 +716,18 @@ + # + # Generic devices + # ++CONFIG_SND_AC97_CODEC=m + # CONFIG_SND_DUMMY is not set + # CONFIG_SND_MTPAV is not set + # CONFIG_SND_SERIAL_U16550 is not set + # CONFIG_SND_MPU401 is not set + + # ++# AVR32 devices ++# ++CONFIG_SND_ATMEL_AC97=m + +# -+# Platform RTC drivers + # SPI devices + # + CONFIG_SND_AT73C213=m +@@ -686,9 +743,14 @@ + # + + # ++# ALSA SoC audio for Freescale SOCs +# -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_V3020 is not set + +# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT32AP700X=y - + # Open Sound System # - # DMA Engine support -@@ -590,11 +835,14 @@ + # CONFIG_SOUND_PRIME is not set ++CONFIG_AC97_BUS=m + # CONFIG_HID_SUPPORT is not set + CONFIG_USB_SUPPORT=y + # CONFIG_USB_ARCH_HAS_HCD is not set +@@ -698,10 +760,6 @@ # - # File systems + # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # --CONFIG_EXT2_FS=m +- +-# +-# USB Gadget Support +-# + CONFIG_USB_GADGET=y + # CONFIG_USB_GADGET_DEBUG is not set + # CONFIG_USB_GADGET_DEBUG_FILES is not set +@@ -729,27 +787,31 @@ + # CONFIG_USB_FILE_STORAGE_TEST is not set + CONFIG_USB_G_SERIAL=m + # CONFIG_USB_MIDI_GADGET is not set +-CONFIG_MMC=m ++# CONFIG_USB_G_PRINTER is not set ++CONFIG_MMC=y + # CONFIG_MMC_DEBUG is not set + # CONFIG_MMC_UNSAFE_RESUME is not set + + # + # MMC/SD Card Drivers + # +-CONFIG_MMC_BLOCK=m ++CONFIG_MMC_BLOCK=y + # CONFIG_MMC_BLOCK_BOUNCE is not set + # CONFIG_SDIO_UART is not set + + # + # MMC/SD Host Controller Drivers + # ++CONFIG_MMC_ATMELMCI=y + CONFIG_MMC_SPI=m ++# CONFIG_MEMSTICK is not set + CONFIG_NEW_LEDS=y + CONFIG_LEDS_CLASS=y + + # + # LED drivers + # ++CONFIG_LEDS_ATMEL_PWM=m + CONFIG_LEDS_GPIO=y + + # +@@ -786,19 +848,22 @@ + # CONFIG_RTC_DRV_PCF8563 is not set + # CONFIG_RTC_DRV_PCF8583 is not set + # CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set + + # + # SPI RTC drivers + # +-# CONFIG_RTC_DRV_RS5C348 is not set + # CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set + + # + # Platform RTC drivers + # ++# CONFIG_RTC_DRV_DS1511 is not set + # CONFIG_RTC_DRV_DS1553 is not set +-# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_M48T86 is not set + # CONFIG_RTC_DRV_M48T59 is not set + # CONFIG_RTC_DRV_V3020 is not set +@@ -816,13 +881,13 @@ + # + # File systems + # +-CONFIG_EXT2_FS=m +CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set --# CONFIG_EXT3_FS is not set +-CONFIG_EXT3_FS=m +CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set + # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4DEV_FS is not set +-CONFIG_JBD=m +CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set + # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - # CONFIG_FS_POSIX_ACL is not set -@@ -609,7 +857,7 @@ - # CONFIG_DNOTIFY is not set +@@ -830,12 +895,10 @@ + # CONFIG_XFS_FS is not set + # CONFIG_GFS2_FS is not set + # CONFIG_OCFS2_FS is not set +-# CONFIG_MINIX_FS is not set +-# CONFIG_ROMFS_FS is not set ++# CONFIG_DNOTIFY is not set + CONFIG_INOTIFY=y + CONFIG_INOTIFY_USER=y + # CONFIG_QUOTA is not set +-# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set --# CONFIG_FUSE_FS is not set -+CONFIG_FUSE_FS=m - - # - # CD-ROM/DVD Filesystems -@@ -638,7 +886,7 @@ + CONFIG_FUSE_FS=m +@@ -866,7 +929,7 @@ + CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set - CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems -@@ -683,8 +931,14 @@ - # CONFIG_SUNRPC_BIND34 is not set - # CONFIG_RPCSEC_GSS_KRB5 is not set - # CONFIG_RPCSEC_GSS_SPKM3 is not set --# CONFIG_SMB_FS is not set --# CONFIG_CIFS is not set -+CONFIG_SMB_FS=m -+# CONFIG_SMB_NLS_DEFAULT is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+# CONFIG_CIFS_WEAK_PW_HASH is not set -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set - # CONFIG_AFS_FS is not set -diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c linux-avr32.git/arch/avr32/drivers/dw-dmac.c ---- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/arch/avr32/drivers/dw-dmac.c 2007-07-13 11:24:16.000000000 +0200 -@@ -0,0 +1,761 @@ -+/* -+ * Driver for the Synopsys DesignWare DMA Controller -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include +@@ -891,8 +954,10 @@ + # CONFIG_JFFS2_RUBIN is not set + # CONFIG_CRAMFS is not set + # CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set + # CONFIG_HPFS_FS is not set + # CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set + # CONFIG_SYSV_FS is not set + # CONFIG_UFS_FS is not set + # CONFIG_NETWORK_FILESYSTEMS is not set +@@ -943,11 +1008,6 @@ + # CONFIG_NLS_KOI8_U is not set + CONFIG_NLS_UTF8=m + # CONFIG_DLM is not set +-CONFIG_INSTRUMENTATION=y +-CONFIG_PROFILING=y +-CONFIG_OPROFILE=m +-CONFIG_KPROBES=y +-# CONFIG_MARKERS is not set + + # + # Kernel hacking +@@ -965,6 +1025,7 @@ + CONFIG_SCHED_DEBUG=y + # CONFIG_SCHEDSTATS is not set + # CONFIG_TIMER_STATS is not set ++# CONFIG_SLUB_STATS is not set + # CONFIG_DEBUG_RT_MUTEXES is not set + # CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set +@@ -981,9 +1042,10 @@ + # CONFIG_DEBUG_LIST is not set + # CONFIG_DEBUG_SG is not set + CONFIG_FRAME_POINTER=y +-CONFIG_FORCED_INLINING=y + # CONFIG_BOOT_PRINTK_DELAY is not set + # CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_KPROBES_SANITY_TEST is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set + # CONFIG_LKDTM is not set + # CONFIG_FAULT_INJECTION is not set + # CONFIG_SAMPLES is not set +@@ -1009,6 +1071,7 @@ + CONFIG_AUDIT_GENERIC=y + CONFIG_ZLIB_INFLATE=y + CONFIG_ZLIB_DEFLATE=y ++CONFIG_GENERIC_ALLOCATOR=y + CONFIG_PLIST=y + CONFIG_HAS_IOMEM=y + CONFIG_HAS_IOPORT=y +--- a/arch/avr32/configs/atstk1004_defconfig ++++ b/arch/avr32/configs/atstk1004_defconfig +@@ -1,7 +1,7 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.24-rc7 +-# Wed Jan 9 23:04:20 2008 ++# Linux kernel version: 2.6.25.4 ++# Wed Jun 11 15:37:49 2008 + # + CONFIG_AVR32=y + CONFIG_GENERIC_GPIO=y +@@ -13,10 +13,10 @@ + CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y + CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y + # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set + # CONFIG_ARCH_HAS_ILOG2_U32 is not set + # CONFIG_ARCH_HAS_ILOG2_U64 is not set +-CONFIG_ARCH_SUPPORTS_OPROFILE=y + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y + CONFIG_GENERIC_BUG=y +@@ -34,15 +34,15 @@ + # CONFIG_POSIX_MQUEUE is not set + # CONFIG_BSD_PROCESS_ACCT is not set + # CONFIG_TASKSTATS is not set +-# CONFIG_USER_NS is not set +-# CONFIG_PID_NS is not set + # CONFIG_AUDIT is not set + # CONFIG_IKCONFIG is not set + CONFIG_LOG_BUF_SHIFT=14 + # CONFIG_CGROUPS is not set +-# CONFIG_FAIR_GROUP_SCHED is not set ++# CONFIG_GROUP_SCHED is not set + CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y + # CONFIG_RELAY is not set ++# CONFIG_NAMESPACES is not set + # CONFIG_BLK_DEV_INITRD is not set + CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_SYSCTL=y +@@ -54,24 +54,37 @@ + CONFIG_PRINTK=y + CONFIG_BUG=y + CONFIG_ELF_CORE=y ++# CONFIG_COMPAT_BRK is not set + # CONFIG_BASE_FULL is not set + # CONFIG_FUTEX is not set + # CONFIG_EPOLL is not set + # CONFIG_SIGNALFD is not set ++# CONFIG_TIMERFD is not set + # CONFIG_EVENTFD is not set + CONFIG_SHMEM=y + CONFIG_VM_EVENT_COUNTERS=y + # CONFIG_SLAB is not set + # CONFIG_SLUB is not set + CONFIG_SLOB=y ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++CONFIG_HAVE_KPROBES=y ++# CONFIG_HAVE_KRETPROBES is not set ++# CONFIG_PROC_PAGE_MONITOR is not set + # CONFIG_TINY_SHMEM is not set + CONFIG_BASE_SMALL=1 + # CONFIG_MODULES is not set + # CONFIG_BLOCK is not set ++CONFIG_CLASSIC_RCU=y + + # + # System Type and features + # ++# CONFIG_TICK_ONESHOT is not set ++# CONFIG_NO_HZ is not set ++# CONFIG_HIGH_RES_TIMERS is not set ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + CONFIG_SUBARCH_AVR32B=y + CONFIG_MMU=y + CONFIG_PERFORMANCE_COUNTERS=y +@@ -83,10 +96,14 @@ + # CONFIG_BOARD_ATSTK1002 is not set + # CONFIG_BOARD_ATSTK1003 is not set + CONFIG_BOARD_ATSTK1004=y ++# CONFIG_BOARD_ATSTK1006 is not set + # CONFIG_BOARD_ATSTK100X_CUSTOM is not set + # CONFIG_BOARD_ATSTK100X_SPI1 is not set + # CONFIG_BOARD_ATSTK1000_J2_LED is not set + CONFIG_BOARD_ATSTK1000_EXTDAC=y ++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set ++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set ++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set + CONFIG_LOADER_U_BOOT=y + + # +@@ -95,6 +112,7 @@ + # CONFIG_AP700X_32_BIT_SMC is not set + CONFIG_AP700X_16_BIT_SMC=y + # CONFIG_AP700X_8_BIT_SMC is not set ++# CONFIG_GPIO_DEV is not set + CONFIG_LOAD_ADDRESS=0x10000000 + CONFIG_ENTRY_ADDRESS=0x90000000 + CONFIG_PHYS_OFFSET=0x10000000 +@@ -120,34 +138,26 @@ + CONFIG_ZONE_DMA_FLAG=0 + CONFIG_VIRT_TO_BUS=y + # CONFIG_OWNERSHIP_TRACE is not set ++# CONFIG_NMI_DEBUGGING is not set ++CONFIG_DW_DMAC=y + # CONFIG_HZ_100 is not set + CONFIG_HZ_250=y + # CONFIG_HZ_300 is not set + # CONFIG_HZ_1000 is not set + CONFIG_HZ=250 ++# CONFIG_SCHED_HRTICK is not set + CONFIG_CMDLINE="" + + # + # Power management options + # ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++# CONFIG_PM is not set + + # + # CPU Frequency scaling + # +-CONFIG_CPU_FREQ=y +-CONFIG_CPU_FREQ_TABLE=y +-# CONFIG_CPU_FREQ_DEBUG is not set +-# CONFIG_CPU_FREQ_STAT is not set +-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +-CONFIG_CPU_FREQ_GOV_USERSPACE=y +-CONFIG_CPU_FREQ_GOV_ONDEMAND=y +-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +-CONFIG_CPU_FREQ_AT32AP=y ++# CONFIG_CPU_FREQ is not set + + # + # Bus options +@@ -222,6 +232,7 @@ + # + # CONFIG_NET_PKTGEN is not set + # CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set + # CONFIG_IRDA is not set + # CONFIG_BT is not set + # CONFIG_AF_RXRPC is not set +@@ -321,6 +332,7 @@ + # CONFIG_MTD_UBI is not set + # CONFIG_PARPORT is not set + # CONFIG_MISC_DEVICES is not set ++# CONFIG_HAVE_IDE is not set + + # + # SCSI device support +@@ -358,6 +370,7 @@ + # + CONFIG_SERIAL_ATMEL=y + CONFIG_SERIAL_ATMEL_CONSOLE=y ++# CONFIG_SERIAL_ATMEL_PDC is not set + # CONFIG_SERIAL_ATMEL_TTYAT is not set + CONFIG_SERIAL_CORE=y + CONFIG_SERIAL_CORE_CONSOLE=y +@@ -365,8 +378,6 @@ + # CONFIG_LEGACY_PTYS is not set + # CONFIG_IPMI_HANDLER is not set + # CONFIG_HW_RANDOM is not set +-# CONFIG_RTC is not set +-# CONFIG_GEN_RTC is not set + # CONFIG_R3964 is not set + # CONFIG_TCG_TPM is not set + # CONFIG_I2C is not set +@@ -389,9 +400,24 @@ + # CONFIG_SPI_AT25 is not set + # CONFIG_SPI_SPIDEV is not set + # CONFIG_SPI_TLE62X0 is not set ++CONFIG_HAVE_GPIO_LIB=y + -+#include -+#include ++# ++# GPIO Support ++# + -+#include "dw-dmac.h" ++# ++# I2C GPIO expanders: ++# + -+#define DMAC_NR_CHANNELS 3 -+#define DMAC_MAX_BLOCKSIZE 4095 ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MCP23S08 is not set + # CONFIG_W1 is not set + # CONFIG_POWER_SUPPLY is not set + # CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set + CONFIG_WATCHDOG=y + # CONFIG_WATCHDOG_NOWAYOUT is not set + +@@ -471,10 +497,6 @@ + # + # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' + # +- +-# +-# USB Gadget Support +-# + CONFIG_USB_GADGET=y + # CONFIG_USB_GADGET_DEBUG_FILES is not set + CONFIG_USB_GADGET_SELECTED=y +@@ -499,7 +521,9 @@ + # CONFIG_USB_FILE_STORAGE is not set + # CONFIG_USB_G_SERIAL is not set + # CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set + # CONFIG_MMC is not set ++# CONFIG_MEMSTICK is not set + # CONFIG_NEW_LEDS is not set + CONFIG_RTC_LIB=y + CONFIG_RTC_CLASS=y +@@ -519,15 +543,17 @@ + # + # SPI RTC drivers + # +-# CONFIG_RTC_DRV_RS5C348 is not set + # CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set + + # + # Platform RTC drivers + # ++# CONFIG_RTC_DRV_DS1511 is not set + # CONFIG_RTC_DRV_DS1553 is not set +-# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set + # CONFIG_RTC_DRV_M48T86 is not set + # CONFIG_RTC_DRV_M48T59 is not set + # CONFIG_RTC_DRV_V3020 is not set +@@ -545,9 +571,9 @@ + # + # File systems + # ++# CONFIG_DNOTIFY is not set + # CONFIG_INOTIFY is not set + # CONFIG_QUOTA is not set +-# CONFIG_DNOTIFY is not set + # CONFIG_AUTOFS_FS is not set + # CONFIG_AUTOFS4_FS is not set + # CONFIG_FUSE_FS is not set +@@ -580,7 +606,6 @@ + # CONFIG_NETWORK_FILESYSTEMS is not set + # CONFIG_NLS is not set + # CONFIG_DLM is not set +-# CONFIG_INSTRUMENTATION is not set + + # + # Kernel hacking +@@ -616,6 +641,7 @@ + # CONFIG_LIBCRC32C is not set + CONFIG_ZLIB_INFLATE=y + CONFIG_ZLIB_DEFLATE=y ++CONFIG_GENERIC_ALLOCATOR=y + CONFIG_HAS_IOMEM=y + CONFIG_HAS_IOPORT=y + CONFIG_HAS_DMA=y +--- /dev/null ++++ b/arch/avr32/configs/atstk1006_defconfig +@@ -0,0 +1,1235 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.25.4 ++# Wed Jun 11 15:40:45 2008 ++# ++CONFIG_AVR32=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_BUG=y ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + -+enum { -+ CH_STATE_FREE = 0, -+ CH_STATE_ALLOCATED, -+ CH_STATE_BUSY, -+}; ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++CONFIG_POSIX_MQUEUE=y ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=14 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++CONFIG_RELAY=y ++# CONFIG_NAMESPACES is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_EMBEDDED=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++# CONFIG_COMPAT_BRK is not set ++# CONFIG_BASE_FULL is not set ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++CONFIG_PROFILING=y ++# CONFIG_MARKERS is not set ++CONFIG_OPROFILE=m ++CONFIG_HAVE_OPROFILE=y ++CONFIG_KPROBES=y ++CONFIG_HAVE_KPROBES=y ++# CONFIG_HAVE_KRETPROBES is not set ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=1 ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_KMOD is not set ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set + -+struct dw_dma_lli { -+ dma_addr_t sar; -+ dma_addr_t dar; -+ dma_addr_t llp; -+ u32 ctllo; -+ u32 ctlhi; -+ u32 sstat; -+ u32 dstat; -+}; ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++# CONFIG_IOSCHED_AS is not set ++# CONFIG_IOSCHED_DEADLINE is not set ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y + -+struct dw_dma_block { -+ struct dw_dma_lli *lli_vaddr; -+ dma_addr_t lli_dma_addr; -+}; ++# ++# System Type and features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y ++CONFIG_SUBARCH_AVR32B=y ++CONFIG_MMU=y ++CONFIG_PERFORMANCE_COUNTERS=y ++CONFIG_PLATFORM_AT32AP=y ++CONFIG_CPU_AT32AP700X=y ++CONFIG_CPU_AT32AP7000=y ++CONFIG_BOARD_ATSTK1000=y ++# CONFIG_BOARD_ATNGW100 is not set ++# CONFIG_BOARD_ATSTK1002 is not set ++# CONFIG_BOARD_ATSTK1003 is not set ++# CONFIG_BOARD_ATSTK1004 is not set ++CONFIG_BOARD_ATSTK1006=y ++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set ++# CONFIG_BOARD_ATSTK100X_SPI1 is not set ++# CONFIG_BOARD_ATSTK1000_J2_LED is not set ++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set ++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set ++CONFIG_BOARD_ATSTK1000_EXTDAC=y ++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set ++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set ++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set ++CONFIG_LOADER_U_BOOT=y + -+struct dw_dma_channel { -+ unsigned int state; -+ int is_cyclic; -+ struct dma_request_sg *req_sg; -+ struct dma_request_cyclic *req_cyclic; -+ unsigned int nr_blocks; -+ int direction; -+ struct dw_dma_block *block; -+}; ++# ++# Atmel AVR32 AP options ++# ++# CONFIG_AP700X_32_BIT_SMC is not set ++CONFIG_AP700X_16_BIT_SMC=y ++# CONFIG_AP700X_8_BIT_SMC is not set ++CONFIG_GPIO_DEV=y ++CONFIG_LOAD_ADDRESS=0x10000000 ++CONFIG_ENTRY_ADDRESS=0x90000000 ++CONFIG_PHYS_OFFSET=0x10000000 ++CONFIG_PREEMPT_NONE=y ++# CONFIG_PREEMPT_VOLUNTARY is not set ++# CONFIG_PREEMPT is not set ++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set ++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set ++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set ++CONFIG_ARCH_FLATMEM_ENABLE=y ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++# CONFIG_OWNERSHIP_TRACE is not set ++CONFIG_NMI_DEBUGGING=y ++CONFIG_DW_DMAC=y ++# CONFIG_HZ_100 is not set ++CONFIG_HZ_250=y ++# CONFIG_HZ_300 is not set ++# CONFIG_HZ_1000 is not set ++CONFIG_HZ=250 ++# CONFIG_SCHED_HRTICK is not set ++CONFIG_CMDLINE="" + -+struct dw_dma_controller { -+ spinlock_t lock; -+ void * __iomem regs; -+ struct dma_pool *lli_pool; -+ struct clk *hclk; -+ struct dma_controller dma; -+ struct dw_dma_channel channel[DMAC_NR_CHANNELS]; -+}; -+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma) ++# ++# Power management options ++# ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_PM=y ++# CONFIG_PM_LEGACY is not set ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y + -+#define dmac_writel_hi(dmac, reg, value) \ -+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4) -+#define dmac_readl_hi(dmac, reg) \ -+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4) -+#define dmac_writel_lo(dmac, reg, value) \ -+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg) -+#define dmac_readl_lo(dmac, reg) \ -+ __raw_readl((dmac)->regs + DW_DMAC_##reg) -+#define dmac_chan_writel_hi(dmac, chan, reg, value) \ -+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \ -+ + DW_DMAC_CHAN_##reg + 4)) -+#define dmac_chan_readl_hi(dmac, chan, reg) \ -+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4) -+#define dmac_chan_writel_lo(dmac, chan, reg, value) \ -+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) -+#define dmac_chan_readl_lo(dmac, chan, reg) \ -+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) -+#define set_channel_bit(dmac, reg, chan) \ -+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8))) -+#define clear_channel_bit(dmac, reg, chan) \ -+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8))) ++# ++# CPU Frequency scaling ++# ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_TABLE=y ++# CONFIG_CPU_FREQ_DEBUG is not set ++# CONFIG_CPU_FREQ_STAT is not set ++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set ++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set ++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y ++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set ++CONFIG_CPU_FREQ_AT32AP=y + -+static int dmac_alloc_channel(struct dma_controller *_dmac) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ unsigned long flags; -+ int i; ++# ++# Bus options ++# ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set + -+ spin_lock_irqsave(&dmac->lock, flags); -+ for (i = 0; i < DMAC_NR_CHANNELS; i++) -+ if (dmac->channel[i].state == CH_STATE_FREE) -+ break; ++# ++# Executable file formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_MISC is not set + -+ if (i < DMAC_NR_CHANNELS) { -+ chan = &dmac->channel[i]; -+ chan->state = CH_STATE_ALLOCATED; -+ } else { -+ i = -EBUSY; -+ } ++# ++# Networking ++# ++CONFIG_NET=y + -+ spin_unlock_irqrestore(&dmac->lock, flags); ++# ++# Networking options ++# ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++CONFIG_XFRM_USER=m ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=m ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE=m ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++CONFIG_INET_TUNNEL=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++CONFIG_IPV6=m ++# CONFIG_IPV6_PRIVACY is not set ++# CONFIG_IPV6_ROUTER_PREF is not set ++# CONFIG_IPV6_OPTIMISTIC_DAD is not set ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++# CONFIG_IPV6_MIP6 is not set ++CONFIG_INET6_XFRM_TUNNEL=m ++CONFIG_INET6_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_TRANSPORT=m ++CONFIG_INET6_XFRM_MODE_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_BEET=m ++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set ++CONFIG_IPV6_SIT=m ++CONFIG_IPV6_TUNNEL=m ++# CONFIG_IPV6_MULTIPLE_TABLES is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++CONFIG_BRIDGE=m ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++CONFIG_LLC=m ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set + -+ return i; -+} ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_NET_TCPPROBE is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set + -+static void dmac_release_channel(struct dma_controller *_dmac, int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set + -+ BUG_ON(channel >= DMAC_NR_CHANNELS -+ || dmac->channel[channel].state != CH_STATE_ALLOCATED); ++# ++# Device Drivers ++# + -+ dmac->channel[channel].state = CH_STATE_FREE; -+} ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++# CONFIG_PREVENT_FIRMWARE_BUILD is not set ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y + -+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac, -+ unsigned int nr_blocks) -+{ -+ struct dw_dma_block *block; -+ void *p; -+ unsigned int i; ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set + -+ block = kmalloc(nr_blocks * sizeof(*block), -+ GFP_KERNEL); -+ if (unlikely(!block)) -+ return NULL; ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_CFI_INTELEXT is not set ++CONFIG_MTD_CFI_AMDSTD=y ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set + -+ for (i = 0; i < nr_blocks; i++) { -+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL, -+ &block[i].lli_dma_addr); -+ block[i].lli_vaddr = p; -+ if (unlikely(!p)) -+ goto fail; -+ } ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_PHYSMAP_START=0x8000000 ++CONFIG_MTD_PHYSMAP_LEN=0x0 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=2 ++# CONFIG_MTD_PLATRAM is not set + -+ return block; ++# ++# Self-contained MTD device drivers ++# ++CONFIG_MTD_DATAFLASH=m ++CONFIG_MTD_M25P80=m ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set + -+fail: -+ for (i = 0; i < nr_blocks; i++) { -+ if (!block[i].lli_vaddr) -+ break; -+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr, -+ block[i].lli_dma_addr); -+ } -+ kfree(block); -+ return NULL; -+} ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++CONFIG_MTD_NAND_ATMEL=y ++CONFIG_MTD_NAND_ATMEL_ECC_HW=y ++# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set ++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ONENAND is not set + -+static void cleanup_channel(struct dw_dma_controller *dmac, -+ struct dw_dma_channel *chan) -+{ -+ unsigned int i; ++# ++# UBI - Unsorted block images ++# ++CONFIG_MTD_UBI=m ++CONFIG_MTD_UBI_WL_THRESHOLD=4096 ++CONFIG_MTD_UBI_BEB_RESERVE=1 ++CONFIG_MTD_UBI_GLUEBI=y + -+ if (chan->nr_blocks > 1) { -+ for (i = 0; i < chan->nr_blocks; i++) -+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr, -+ chan->block[i].lli_dma_addr); -+ kfree(chan->block); -+ } ++# ++# UBI debugging options ++# ++# CONFIG_MTD_UBI_DEBUG is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=m ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=m ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=4096 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++CONFIG_ATMEL_PWM=m ++CONFIG_ATMEL_TCLIB=y ++CONFIG_ATMEL_TCB_CLKSRC=y ++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 ++# CONFIG_EEPROM_93CX6 is not set ++CONFIG_ATMEL_SSC=m ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_HAVE_IDE is not set + -+ chan->state = CH_STATE_ALLOCATED; -+} ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=m ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++# CONFIG_SCSI_PROC_FS is not set + -+static int dmac_prepare_request_sg(struct dma_controller *_dmac, -+ struct dma_request_sg *req) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ unsigned long ctlhi, ctllo, cfghi, cfglo; -+ unsigned long block_size; -+ unsigned int nr_blocks; -+ int ret, i, direction; -+ unsigned long flags; ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=m ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++CONFIG_BLK_DEV_SR=m ++# CONFIG_BLK_DEV_SR_VENDOR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set + -+ spin_lock_irqsave(&dmac->lock, flags); ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m + -+ ret = -EINVAL; -+ if (req->req.channel >= DMAC_NR_CHANNELS -+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED -+ || req->block_size > DMAC_MAX_BLOCKSIZE) { -+ spin_unlock_irqrestore(&dmac->lock, flags); -+ return -EINVAL; -+ } ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++# CONFIG_SCSI_LOWLEVEL is not set ++CONFIG_ATA=m ++# CONFIG_ATA_NONSTANDARD is not set ++# CONFIG_SATA_MV is not set ++CONFIG_PATA_AT32=m ++# CONFIG_PATA_PLATFORM is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_NETDEVICES_MULTIQUEUE is not set ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++CONFIG_TUN=m ++# CONFIG_VETH is not set ++CONFIG_PHYLIB=y + -+ chan = &dmac->channel[req->req.channel]; -+ chan->state = CH_STATE_BUSY; -+ chan->req_sg = req; -+ chan->is_cyclic = 0; ++# ++# MII PHY device drivers ++# ++# CONFIG_MARVELL_PHY is not set ++# CONFIG_DAVICOM_PHY is not set ++# CONFIG_QSEMI_PHY is not set ++# CONFIG_LXT_PHY is not set ++# CONFIG_CICADA_PHY is not set ++# CONFIG_VITESSE_PHY is not set ++# CONFIG_SMSC_PHY is not set ++# CONFIG_BROADCOM_PHY is not set ++# CONFIG_ICPLUS_PHY is not set ++# CONFIG_REALTEK_PHY is not set ++# CONFIG_FIXED_PHY is not set ++# CONFIG_MDIO_BITBANG is not set ++CONFIG_NET_ETHERNET=y ++# CONFIG_MII is not set ++CONFIG_MACB=y ++# CONFIG_ENC28J60 is not set ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_B44 is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set + -+ /* -+ * We have marked the channel as busy, so no need to keep the -+ * lock as long as we only touch the channel-specific -+ * registers -+ */ -+ spin_unlock_irqrestore(&dmac->lock, flags); ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_WAN is not set ++CONFIG_PPP=m ++# CONFIG_PPP_MULTILINK is not set ++# CONFIG_PPP_FILTER is not set ++CONFIG_PPP_ASYNC=m ++# CONFIG_PPP_SYNC_TTY is not set ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++# CONFIG_PPP_MPPE is not set ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=m ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++# CONFIG_PHONE is not set + -+ /* -+ * There may be limitations in the driver and/or the DMA -+ * controller that prevents us from sending a whole -+ * scatterlist item in one go. Taking this into account, -+ * calculate the number of block transfers we need to set up. -+ * -+ * FIXME: Let the peripheral driver know about the maximum -+ * block size we support. We really don't want to use a -+ * different block size than what was suggested by the -+ * peripheral. -+ * -+ * Each block will get its own Linked List Item (LLI) below. -+ */ -+ block_size = req->block_size; -+ nr_blocks = req->nr_blocks; -+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n", -+ block_size, nr_blocks, req->nr_sg); ++# ++# Input device support ++# ++CONFIG_INPUT=m ++# CONFIG_INPUT_FF_MEMLESS is not set ++CONFIG_INPUT_POLLDEV=m + -+ BUG_ON(nr_blocks == 0); -+ chan->nr_blocks = nr_blocks; ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=m ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=m ++# CONFIG_INPUT_EVBUG is not set + -+ ret = -EINVAL; -+ cfglo = cfghi = 0; -+ switch (req->direction) { -+ case DMA_DIR_MEM_TO_PERIPH: -+ direction = DMA_TO_DEVICE; -+ cfghi = req->periph_id << (43 - 32); -+ break; ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++CONFIG_KEYBOARD_GPIO=m ++CONFIG_INPUT_MOUSE=y ++# CONFIG_MOUSE_PS2 is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++CONFIG_MOUSE_GPIO=m ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set + -+ case DMA_DIR_PERIPH_TO_MEM: -+ direction = DMA_FROM_DEVICE; -+ cfghi = req->periph_id << (39 - 32); -+ break; -+ default: -+ goto out_unclaim_channel; -+ } ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set + -+ chan->direction = direction; ++# ++# Character devices ++# ++# CONFIG_VT is not set ++# CONFIG_SERIAL_NONSTANDARD is not set + -+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); -+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set + -+ ctlhi = block_size >> req->width; -+ ctllo = ((req->direction << 20) -+ // | (1 << 14) | (1 << 11) // source/dest burst trans len -+ | (req->width << 4) | (req->width << 1) -+ | (1 << 0)); // interrupt enable ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_ATMEL=y ++CONFIG_SERIAL_ATMEL_CONSOLE=y ++CONFIG_SERIAL_ATMEL_PDC=y ++# CONFIG_SERIAL_ATMEL_TTYAT is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=m ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=m + -+ if (nr_blocks == 1) { -+ /* Only one block: No need to use block chaining */ -+ if (direction == DMA_TO_DEVICE) { -+ dmac_chan_writel_lo(dmac, req->req.channel, SAR, -+ req->sg->dma_address); -+ dmac_chan_writel_lo(dmac, req->req.channel, DAR, -+ req->data_reg); -+ ctllo |= 2 << 7; // no dst increment -+ } else { -+ dmac_chan_writel_lo(dmac, req->req.channel, SAR, -+ req->data_reg); -+ dmac_chan_writel_lo(dmac, req->req.channel, DAR, -+ req->sg->dma_address); -+ ctllo |= 2 << 9; // no src increment -+ } -+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo); -+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi); -+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo); -+ } else { -+ struct dw_dma_lli *lli, *lli_prev = NULL; -+ int j = 0, offset = 0; ++# ++# I2C Algorithms ++# ++CONFIG_I2C_ALGOBIT=m ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set + -+ ret = -ENOMEM; -+ chan->block = allocate_blocks(dmac, nr_blocks); -+ if (!chan->block) -+ goto out_unclaim_channel; ++# ++# I2C Hardware Bus support ++# ++CONFIG_I2C_ATMELTWI=m ++CONFIG_I2C_GPIO=m ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_SIMTEC is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_STUB is not set + -+ if (direction == DMA_TO_DEVICE) -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; -+ else -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set + -+ /* -+ * Map scatterlist items to blocks. One scatterlist -+ * item may need more than one block for the reasons -+ * mentioned above. -+ */ -+ for (i = 0; i < nr_blocks; i++) { -+ lli = chan->block[i].lli_vaddr; -+ if (lli_prev) { -+ lli_prev->llp = chan->block[i].lli_dma_addr; -+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, -+ lli_prev->sar, lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi); -+ } -+ lli->llp = 0; -+ lli->ctllo = ctllo; -+ lli->ctlhi = ctlhi; -+ if (direction == DMA_TO_DEVICE) { -+ lli->sar = req->sg[j].dma_address + offset; -+ lli->dar = req->data_reg; -+ } else { -+ lli->sar = req->data_reg; -+ lli->dar = req->sg[j].dma_address + offset; -+ } -+ lli_prev = lli; -+ -+ offset += block_size; -+ if (offset > req->sg[j].length) { -+ j++; -+ offset = 0; -+ } -+ } ++# ++# SPI support ++# ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y + -+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, lli_prev->sar, -+ lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi); ++# ++# SPI Master Controller Drivers ++# ++CONFIG_SPI_ATMEL=y ++# CONFIG_SPI_BITBANG is not set + -+ /* -+ * SAR, DAR and CTL are initialized from the LLI. We -+ * only have to enable the LLI bits in CTL. -+ */ -+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0); -+ dmac_chan_writel_lo(dmac, req->req.channel, LLP, -+ chan->block[0].lli_dma_addr); -+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27); -+ } ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++CONFIG_SPI_SPIDEV=m ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_HAVE_GPIO_LIB=y + -+ set_channel_bit(dmac, MASK_XFER, req->req.channel); -+ set_channel_bit(dmac, MASK_ERROR, req->req.channel); -+ if (req->req.block_complete) -+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel); -+ else -+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel); ++# ++# GPIO Support ++# ++# CONFIG_DEBUG_GPIO is not set + -+ return 0; ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set + -+out_unclaim_channel: -+ chan->state = CH_STATE_ALLOCATED; -+ return ret; -+} ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set + -+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac, -+ struct dma_request_cyclic *req) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ unsigned long ctlhi, ctllo, cfghi, cfglo; -+ unsigned long block_size; -+ int ret, i, direction; -+ unsigned long flags; ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_AT32AP700X_WDT=y + -+ spin_lock_irqsave(&dmac->lock, flags); ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set + -+ block_size = (req->buffer_size/req->periods) >> req->width; ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set + -+ ret = -EINVAL; -+ if (req->req.channel >= DMAC_NR_CHANNELS -+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED -+ || (req->periods == 0) -+ || block_size > DMAC_MAX_BLOCKSIZE) { -+ spin_unlock_irqrestore(&dmac->lock, flags); -+ return -EINVAL; -+ } ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_DAB is not set + -+ chan = &dmac->channel[req->req.channel]; -+ chan->state = CH_STATE_BUSY; -+ chan->is_cyclic = 1; -+ chan->req_cyclic = req; ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_SYS_FOPS is not set ++CONFIG_FB_DEFERRED_IO=y ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set + -+ /* -+ * We have marked the channel as busy, so no need to keep the -+ * lock as long as we only touch the channel-specific -+ * registers -+ */ -+ spin_unlock_irqrestore(&dmac->lock, flags); ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++CONFIG_FB_ATMEL=y ++# CONFIG_FB_VIRTUAL is not set ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_LCD_CLASS_DEVICE=y ++CONFIG_LCD_LTV350QV=y ++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + -+ /* -+ Setup -+ */ -+ BUG_ON(req->buffer_size % req->periods); -+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++# CONFIG_LOGO is not set + -+ chan->nr_blocks = req->periods; ++# ++# Sound ++# ++CONFIG_SOUND=m + -+ ret = -EINVAL; -+ cfglo = cfghi = 0; -+ switch (req->direction) { -+ case DMA_DIR_MEM_TO_PERIPH: -+ direction = DMA_TO_DEVICE; -+ cfghi = req->periph_id << (43 - 32); -+ break; ++# ++# Advanced Linux Sound Architecture ++# ++CONFIG_SND=m ++CONFIG_SND_TIMER=m ++CONFIG_SND_PCM=m ++# CONFIG_SND_SEQUENCER is not set ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_PCM_OSS_PLUGINS=y ++# CONFIG_SND_DYNAMIC_MINORS is not set ++# CONFIG_SND_SUPPORT_OLD_API is not set ++# CONFIG_SND_VERBOSE_PROCFS is not set ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set + -+ case DMA_DIR_PERIPH_TO_MEM: -+ direction = DMA_FROM_DEVICE; -+ cfghi = req->periph_id << (39 - 32); -+ break; -+ default: -+ goto out_unclaim_channel; -+ } ++# ++# Generic devices ++# ++CONFIG_SND_AC97_CODEC=m ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set + -+ chan->direction = direction; ++# ++# AVR32 devices ++# ++CONFIG_SND_ATMEL_AC97=m + -+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); -+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); ++# ++# SPI devices ++# ++CONFIG_SND_AT73C213=m ++CONFIG_SND_AT73C213_TARGET_BITRATE=48000 + -+ ctlhi = block_size; -+ ctllo = ((req->direction << 20) -+ | (req->width << 4) | (req->width << 1) -+ | (1 << 0)); // interrupt enable ++# ++# System on Chip audio support ++# ++# CONFIG_SND_SOC is not set + -+ { -+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL; ++# ++# SoC Audio support for SuperH ++# + -+ ret = -ENOMEM; -+ chan->block = allocate_blocks(dmac, req->periods); -+ if (!chan->block) -+ goto out_unclaim_channel; ++# ++# ALSA SoC audio for Freescale SOCs ++# + -+ if (direction == DMA_TO_DEVICE) -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; -+ else -+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; ++# ++# Open Sound System ++# ++# CONFIG_SOUND_PRIME is not set ++CONFIG_AC97_BUS=m ++# CONFIG_HID_SUPPORT is not set ++CONFIG_USB_SUPPORT=y ++# CONFIG_USB_ARCH_HAS_HCD is not set ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB_ARCH_HAS_EHCI is not set + -+ /* -+ * Set up a linked list items where each period gets -+ * an item. The linked list item for the last period -+ * points back to the star of the buffer making a -+ * cyclic buffer. -+ */ -+ for (i = 0; i < req->periods; i++) { -+ lli = chan->block[i].lli_vaddr; -+ if (lli_prev) { -+ lli_prev->llp = chan->block[i].lli_dma_addr; -+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, -+ lli_prev->sar, lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi);*/ -+ } -+ lli->llp = 0; -+ lli->ctllo = ctllo; -+ lli->ctlhi = ctlhi; -+ if (direction == DMA_TO_DEVICE) { -+ lli->sar = req->buffer_start + i*(block_size << req->width); -+ lli->dar = req->data_reg; -+ } else { -+ lli->sar = req->data_reg; -+ lli->dar = req->buffer_start + i*(block_size << req->width); -+ } -+ lli_prev = lli; -+ } -+ lli->llp = chan->block[0].lli_dma_addr; ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++# CONFIG_USB_GADGET_DEBUG_FS is not set ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++CONFIG_USB_GADGET_ATMEL_USBA=y ++CONFIG_USB_ATMEL_USBA=y ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_PXA2XX is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++CONFIG_USB_ZERO=m ++CONFIG_USB_ETH=m ++CONFIG_USB_ETH_RNDIS=y ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set + -+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", -+ i - 1, chan->block[i - 1].lli_vaddr, -+ chan->block[i - 1].lli_dma_addr, lli_prev->sar, -+ lli_prev->dar, lli_prev->llp, -+ lli_prev->ctllo, lli_prev->ctlhi); */ -+ -+ /* -+ * SAR, DAR and CTL are initialized from the LLI. We -+ * only have to enable the LLI bits in CTL. -+ */ -+ dmac_chan_writel_lo(dmac, req->req.channel, LLP, -+ chan->block[0].lli_dma_addr); -+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27); -+ } -+ -+ clear_channel_bit(dmac, MASK_XFER, req->req.channel); -+ set_channel_bit(dmac, MASK_ERROR, req->req.channel); -+ if (req->req.block_complete) -+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel); -+ else -+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel); ++# ++# MMC/SD Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set + -+ return 0; ++# ++# MMC/SD Host Controller Drivers ++# ++CONFIG_MMC_ATMELMCI=y ++CONFIG_MMC_SPI=m ++# CONFIG_MEMSTICK is not set ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=m + -+out_unclaim_channel: -+ chan->state = CH_STATE_ALLOCATED; -+ return ret; -+} ++# ++# LED drivers ++# ++CONFIG_LEDS_ATMEL_PWM=m ++CONFIG_LEDS_GPIO=m + -+static int dmac_start_request(struct dma_controller *_dmac, -+ unsigned int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++# ++# LED Triggers ++# ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=m ++CONFIG_LEDS_TRIGGER_HEARTBEAT=m ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set + -+ BUG_ON(channel >= DMAC_NR_CHANNELS); ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set + -+ set_channel_bit(dmac, CH_EN, channel); ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set + -+ return 0; -+} ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set + -+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac, -+ unsigned int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; -+ dma_addr_t current_pos; ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_V3020 is not set + -+ BUG_ON(channel >= DMAC_NR_CHANNELS); ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_AT32AP700X=y + -+ chan = &dmac->channel[channel]; ++# ++# Userspace I/O ++# ++# CONFIG_UIO is not set + -+ switch (chan->direction) { -+ case DMA_TO_DEVICE: -+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR); -+ break; -+ case DMA_FROM_DEVICE: -+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR); -+ break; -+ default: -+ return 0; -+ } ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_DNOTIFY is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++CONFIG_FUSE_FS=m + ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set + -+ if (!current_pos) { -+ if (chan->is_cyclic) { -+ current_pos = chan->req_cyclic->buffer_start; -+ } else { -+ current_pos = chan->req_sg->sg->dma_address; -+ } -+ } ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=m ++CONFIG_MSDOS_FS=m ++CONFIG_VFAT_FS=m ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set + -+ return current_pos; -+} ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_KCORE=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_CONFIGFS_FS=y + ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++# CONFIG_JFFS2_FS_WRITEBUFFER is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++CONFIG_MINIX_FS=m ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_BIND34 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set + -+static int dmac_stop_request(struct dma_controller *_dmac, -+ unsigned int channel) -+{ -+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); -+ struct dw_dma_channel *chan; ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=m ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=m ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=m ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=m ++# CONFIG_DLM is not set + -+ BUG_ON(channel >= DMAC_NR_CHANNELS); ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_KPROBES_SANITY_TEST is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_LKDTM is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_SAMPLES is not set + -+ chan = &dmac->channel[channel]; -+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n", -+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR), -+ dmac_chan_readl_lo(dmac, channel, DAR), -+ dmac_chan_readl_lo(dmac, channel, LLP), -+ dmac_chan_readl_hi(dmac, channel, CTL), -+ dmac_chan_readl_lo(dmac, channel, CTL)); ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=m ++CONFIG_CRYPTO_AEAD=m ++CONFIG_CRYPTO_BLKCIPHER=m ++# CONFIG_CRYPTO_SEQIV is not set ++CONFIG_CRYPTO_HASH=m ++CONFIG_CRYPTO_MANAGER=m ++CONFIG_CRYPTO_HMAC=m ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=m ++CONFIG_CRYPTO_SHA1=m ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_ECB is not set ++CONFIG_CRYPTO_CBC=m ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_XTS is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=m ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++CONFIG_CRYPTO_DEFLATE=m ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_TEST is not set ++CONFIG_CRYPTO_AUTHENC=m ++# CONFIG_CRYPTO_LZO is not set ++# CONFIG_CRYPTO_HW is not set + -+ if (chan->state == CH_STATE_BUSY) { -+ clear_channel_bit(dmac, CH_EN, channel); -+ cleanup_channel(dmac, &dmac->channel[channel]); -+ } ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=m ++# CONFIG_CRC16 is not set ++CONFIG_CRC_ITU_T=m ++CONFIG_CRC32=y ++CONFIG_CRC7=m ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_GENERIC_ALLOCATOR=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +--- /dev/null ++++ b/arch/avr32/drivers/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_DW_DMAC) += dw-dmac.o +--- /dev/null ++++ b/arch/avr32/drivers/dw-dmac.c +@@ -0,0 +1,761 @@ ++/* ++ * Driver for the Synopsys DesignWare DMA Controller ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ return 0; -+} ++#include ++#include + ++#include "dw-dmac.h" + -+static void dmac_block_complete(struct dw_dma_controller *dmac) -+{ -+ struct dw_dma_channel *chan; -+ unsigned long status, chanid; ++#define DMAC_NR_CHANNELS 3 ++#define DMAC_MAX_BLOCKSIZE 4095 + -+ status = dmac_readl_lo(dmac, STATUS_BLOCK); ++enum { ++ CH_STATE_FREE = 0, ++ CH_STATE_ALLOCATED, ++ CH_STATE_BUSY, ++}; + -+ while (status) { -+ struct dma_request *req; -+ chanid = __ffs(status); -+ chan = &dmac->channel[chanid]; ++struct dw_dma_lli { ++ dma_addr_t sar; ++ dma_addr_t dar; ++ dma_addr_t llp; ++ u32 ctllo; ++ u32 ctlhi; ++ u32 sstat; ++ u32 dstat; ++}; + -+ if (chan->is_cyclic) { -+ BUG_ON(!chan->req_cyclic -+ || !chan->req_cyclic->req.block_complete); -+ req = &chan->req_cyclic->req; -+ } else { -+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete); -+ req = &chan->req_sg->req; -+ } -+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid); -+ req->block_complete(req); -+ status = dmac_readl_lo(dmac, STATUS_BLOCK); -+ } -+} ++struct dw_dma_block { ++ struct dw_dma_lli *lli_vaddr; ++ dma_addr_t lli_dma_addr; ++}; + -+static void dmac_xfer_complete(struct dw_dma_controller *dmac) -+{ -+ struct dw_dma_channel *chan; -+ struct dma_request *req; -+ unsigned long status, chanid; ++struct dw_dma_channel { ++ unsigned int state; ++ int is_cyclic; ++ struct dma_request_sg *req_sg; ++ struct dma_request_cyclic *req_cyclic; ++ unsigned int nr_blocks; ++ int direction; ++ struct dw_dma_block *block; ++}; + -+ status = dmac_readl_lo(dmac, STATUS_XFER); ++struct dw_dma_controller { ++ spinlock_t lock; ++ void * __iomem regs; ++ struct dma_pool *lli_pool; ++ struct clk *hclk; ++ struct dma_controller dma; ++ struct dw_dma_channel channel[DMAC_NR_CHANNELS]; ++}; ++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma) + -+ while (status) { -+ chanid = __ffs(status); -+ chan = &dmac->channel[chanid]; ++#define dmac_writel_hi(dmac, reg, value) \ ++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4) ++#define dmac_readl_hi(dmac, reg) \ ++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4) ++#define dmac_writel_lo(dmac, reg, value) \ ++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg) ++#define dmac_readl_lo(dmac, reg) \ ++ __raw_readl((dmac)->regs + DW_DMAC_##reg) ++#define dmac_chan_writel_hi(dmac, chan, reg, value) \ ++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \ ++ + DW_DMAC_CHAN_##reg + 4)) ++#define dmac_chan_readl_hi(dmac, chan, reg) \ ++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4) ++#define dmac_chan_writel_lo(dmac, chan, reg, value) \ ++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) ++#define dmac_chan_readl_lo(dmac, chan, reg) \ ++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) ++#define set_channel_bit(dmac, reg, chan) \ ++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8))) ++#define clear_channel_bit(dmac, reg, chan) \ ++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8))) + -+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid); ++static int dmac_alloc_channel(struct dma_controller *_dmac) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ unsigned long flags; ++ int i; + -+ req = &chan->req_sg->req; -+ BUG_ON(!req); -+ cleanup_channel(dmac, chan); -+ if (req->xfer_complete) -+ req->xfer_complete(req); ++ spin_lock_irqsave(&dmac->lock, flags); ++ for (i = 0; i < DMAC_NR_CHANNELS; i++) ++ if (dmac->channel[i].state == CH_STATE_FREE) ++ break; + -+ status = dmac_readl_lo(dmac, STATUS_XFER); ++ if (i < DMAC_NR_CHANNELS) { ++ chan = &dmac->channel[i]; ++ chan->state = CH_STATE_ALLOCATED; ++ } else { ++ i = -EBUSY; + } ++ ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ ++ return i; +} + -+static void dmac_error(struct dw_dma_controller *dmac) ++static void dmac_release_channel(struct dma_controller *_dmac, int channel) +{ -+ struct dw_dma_channel *chan; -+ unsigned long status, chanid; ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); + -+ status = dmac_readl_lo(dmac, STATUS_ERROR); ++ BUG_ON(channel >= DMAC_NR_CHANNELS ++ || dmac->channel[channel].state != CH_STATE_ALLOCATED); + -+ while (status) { -+ struct dma_request *req; ++ dmac->channel[channel].state = CH_STATE_FREE; ++} + -+ chanid = __ffs(status); -+ chan = &dmac->channel[chanid]; ++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac, ++ unsigned int nr_blocks) ++{ ++ struct dw_dma_block *block; ++ void *p; ++ unsigned int i; + -+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid); -+ clear_channel_bit(dmac, CH_EN, chanid); ++ block = kmalloc(nr_blocks * sizeof(*block), ++ GFP_KERNEL); ++ if (unlikely(!block)) ++ return NULL; + -+ if (chan->is_cyclic) { -+ BUG_ON(!chan->req_cyclic); -+ req = &chan->req_cyclic->req; -+ } else { -+ BUG_ON(!chan->req_sg); -+ req = &chan->req_sg->req; -+ } ++ for (i = 0; i < nr_blocks; i++) { ++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL, ++ &block[i].lli_dma_addr); ++ block[i].lli_vaddr = p; ++ if (unlikely(!p)) ++ goto fail; ++ } + -+ cleanup_channel(dmac, chan); -+ if (req->error) -+ req->error(req); ++ return block; + -+ status = dmac_readl_lo(dmac, STATUS_XFER); ++fail: ++ for (i = 0; i < nr_blocks; i++) { ++ if (!block[i].lli_vaddr) ++ break; ++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr, ++ block[i].lli_dma_addr); + } ++ kfree(block); ++ return NULL; +} + -+static irqreturn_t dmac_interrupt(int irq, void *dev_id) ++static void cleanup_channel(struct dw_dma_controller *dmac, ++ struct dw_dma_channel *chan) +{ -+ struct dw_dma_controller *dmac = dev_id; -+ unsigned long status; -+ int ret = IRQ_NONE; -+ -+ spin_lock(&dmac->lock); -+ -+ status = dmac_readl_lo(dmac, STATUS_INT); -+ -+ while (status) { -+ ret = IRQ_HANDLED; -+ if (status & 0x10) -+ dmac_error(dmac); -+ if (status & 0x02) -+ dmac_block_complete(dmac); -+ if (status & 0x01) -+ dmac_xfer_complete(dmac); ++ unsigned int i; + -+ status = dmac_readl_lo(dmac, STATUS_INT); ++ if (chan->nr_blocks > 1) { ++ for (i = 0; i < chan->nr_blocks; i++) ++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr, ++ chan->block[i].lli_dma_addr); ++ kfree(chan->block); + } + -+ spin_unlock(&dmac->lock); -+ return ret; ++ chan->state = CH_STATE_ALLOCATED; +} + -+static int __devinit dmac_probe(struct platform_device *pdev) ++static int dmac_prepare_request_sg(struct dma_controller *_dmac, ++ struct dma_request_sg *req) +{ -+ struct dw_dma_controller *dmac; -+ struct resource *regs; -+ int ret; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) -+ return -ENXIO; ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ unsigned long ctlhi, ctllo, cfghi, cfglo; ++ unsigned long block_size; ++ unsigned int nr_blocks; ++ int ret, i, direction; ++ unsigned long flags; + -+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL); -+ if (!dmac) -+ return -ENOMEM; -+ memset(dmac, 0, sizeof(*dmac)); ++ spin_lock_irqsave(&dmac->lock, flags); + -+ dmac->hclk = clk_get(&pdev->dev, "hclk"); -+ if (IS_ERR(dmac->hclk)) { -+ ret = PTR_ERR(dmac->hclk); -+ goto out_free_dmac; ++ ret = -EINVAL; ++ if (req->req.channel >= DMAC_NR_CHANNELS ++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED ++ || req->block_size > DMAC_MAX_BLOCKSIZE) { ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ return -EINVAL; + } -+ clk_enable(dmac->hclk); + -+ ret = -ENOMEM; -+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev, -+ sizeof(struct dw_dma_lli), 4, 0); -+ if (!dmac->lli_pool) -+ goto out_disable_clk; ++ chan = &dmac->channel[req->req.channel]; ++ chan->state = CH_STATE_BUSY; ++ chan->req_sg = req; ++ chan->is_cyclic = 0; + -+ spin_lock_init(&dmac->lock); -+ dmac->dma.dev = &pdev->dev; -+ dmac->dma.alloc_channel = dmac_alloc_channel; -+ dmac->dma.release_channel = dmac_release_channel; -+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg; -+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic; -+ dmac->dma.start_request = dmac_start_request; -+ dmac->dma.stop_request = dmac_stop_request; -+ dmac->dma.get_current_pos = dmac_get_current_pos; ++ /* ++ * We have marked the channel as busy, so no need to keep the ++ * lock as long as we only touch the channel-specific ++ * registers ++ */ ++ spin_unlock_irqrestore(&dmac->lock, flags); + -+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!dmac->regs) -+ goto out_free_pool; ++ /* ++ * There may be limitations in the driver and/or the DMA ++ * controller that prevents us from sending a whole ++ * scatterlist item in one go. Taking this into account, ++ * calculate the number of block transfers we need to set up. ++ * ++ * FIXME: Let the peripheral driver know about the maximum ++ * block size we support. We really don't want to use a ++ * different block size than what was suggested by the ++ * peripheral. ++ * ++ * Each block will get its own Linked List Item (LLI) below. ++ */ ++ block_size = req->block_size; ++ nr_blocks = req->nr_blocks; ++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n", ++ block_size, nr_blocks, req->nr_sg); + -+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt, -+ IRQF_SAMPLE_RANDOM, pdev->name, dmac); -+ if (ret) -+ goto out_unmap_regs; ++ BUG_ON(nr_blocks == 0); ++ chan->nr_blocks = nr_blocks; + -+ /* Enable the DMA controller */ -+ dmac_writel_lo(dmac, CFG, 1); ++ ret = -EINVAL; ++ cfglo = cfghi = 0; ++ switch (req->direction) { ++ case DMA_DIR_MEM_TO_PERIPH: ++ direction = DMA_TO_DEVICE; ++ cfghi = req->periph_id << (43 - 32); ++ break; + -+ register_dma_controller(&dmac->dma); ++ case DMA_DIR_PERIPH_TO_MEM: ++ direction = DMA_FROM_DEVICE; ++ cfghi = req->periph_id << (39 - 32); ++ break; ++ default: ++ goto out_unclaim_channel; ++ } + -+ printk(KERN_INFO -+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n", -+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0)); ++ chan->direction = direction; + -+ return 0; ++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); ++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); + -+out_unmap_regs: -+ iounmap(dmac->regs); -+out_free_pool: -+ dma_pool_destroy(dmac->lli_pool); -+out_disable_clk: -+ clk_disable(dmac->hclk); -+ clk_put(dmac->hclk); -+out_free_dmac: -+ kfree(dmac); -+ return ret; -+} ++ ctlhi = block_size >> req->width; ++ ctllo = ((req->direction << 20) ++ // | (1 << 14) | (1 << 11) // source/dest burst trans len ++ | (req->width << 4) | (req->width << 1) ++ | (1 << 0)); // interrupt enable + -+static struct platform_driver dmac_driver = { -+ .probe = dmac_probe, -+ .driver = { -+ .name = "dmaca", -+ }, -+}; ++ if (nr_blocks == 1) { ++ /* Only one block: No need to use block chaining */ ++ if (direction == DMA_TO_DEVICE) { ++ dmac_chan_writel_lo(dmac, req->req.channel, SAR, ++ req->sg->dma_address); ++ dmac_chan_writel_lo(dmac, req->req.channel, DAR, ++ req->data_reg); ++ ctllo |= 2 << 7; // no dst increment ++ } else { ++ dmac_chan_writel_lo(dmac, req->req.channel, SAR, ++ req->data_reg); ++ dmac_chan_writel_lo(dmac, req->req.channel, DAR, ++ req->sg->dma_address); ++ ctllo |= 2 << 9; // no src increment ++ } ++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo); ++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi); ++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo); ++ } else { ++ struct dw_dma_lli *lli, *lli_prev = NULL; ++ int j = 0, offset = 0; + -+static int __init dmac_init(void) -+{ -+ return platform_driver_register(&dmac_driver); -+} -+subsys_initcall(dmac_init); ++ ret = -ENOMEM; ++ chan->block = allocate_blocks(dmac, nr_blocks); ++ if (!chan->block) ++ goto out_unclaim_channel; + -+static void __exit dmac_exit(void) -+{ -+ platform_driver_unregister(&dmac_driver); -+} -+module_exit(dmac_exit); ++ if (direction == DMA_TO_DEVICE) ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; ++ else ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; + -+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver"); -+MODULE_AUTHOR("Haavard Skinnemoen "); -+MODULE_LICENSE("GPL"); -diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h linux-avr32.git/arch/avr32/drivers/dw-dmac.h ---- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/arch/avr32/drivers/dw-dmac.h 2007-06-06 11:33:46.000000000 +0200 -@@ -0,0 +1,42 @@ -+/* -+ * Driver for the Synopsys DesignWare DMA Controller -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __AVR32_DW_DMAC_H__ -+#define __AVR32_DW_DMAC_H__ ++ /* ++ * Map scatterlist items to blocks. One scatterlist ++ * item may need more than one block for the reasons ++ * mentioned above. ++ */ ++ for (i = 0; i < nr_blocks; i++) { ++ lli = chan->block[i].lli_vaddr; ++ if (lli_prev) { ++ lli_prev->llp = chan->block[i].lli_dma_addr; ++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", ++ i - 1, chan->block[i - 1].lli_vaddr, ++ chan->block[i - 1].lli_dma_addr, ++ lli_prev->sar, lli_prev->dar, lli_prev->llp, ++ lli_prev->ctllo, lli_prev->ctlhi); ++ } ++ lli->llp = 0; ++ lli->ctllo = ctllo; ++ lli->ctlhi = ctlhi; ++ if (direction == DMA_TO_DEVICE) { ++ lli->sar = req->sg[j].dma_address + offset; ++ lli->dar = req->data_reg; ++ } else { ++ lli->sar = req->data_reg; ++ lli->dar = req->sg[j].dma_address + offset; ++ } ++ lli_prev = lli; + -+#define DW_DMAC_CFG 0x398 -+#define DW_DMAC_CH_EN 0x3a0 ++ offset += block_size; ++ if (offset > req->sg[j].length) { ++ j++; ++ offset = 0; ++ } ++ } + -+#define DW_DMAC_STATUS_XFER 0x2e8 -+#define DW_DMAC_STATUS_BLOCK 0x2f0 -+#define DW_DMAC_STATUS_ERROR 0x308 ++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", ++ i - 1, chan->block[i - 1].lli_vaddr, ++ chan->block[i - 1].lli_dma_addr, lli_prev->sar, ++ lli_prev->dar, lli_prev->llp, ++ lli_prev->ctllo, lli_prev->ctlhi); + -+#define DW_DMAC_MASK_XFER 0x310 -+#define DW_DMAC_MASK_BLOCK 0x318 -+#define DW_DMAC_MASK_ERROR 0x330 ++ /* ++ * SAR, DAR and CTL are initialized from the LLI. We ++ * only have to enable the LLI bits in CTL. ++ */ ++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0); ++ dmac_chan_writel_lo(dmac, req->req.channel, LLP, ++ chan->block[0].lli_dma_addr); ++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27); ++ } + -+#define DW_DMAC_CLEAR_XFER 0x338 -+#define DW_DMAC_CLEAR_BLOCK 0x340 -+#define DW_DMAC_CLEAR_ERROR 0x358 ++ set_channel_bit(dmac, MASK_XFER, req->req.channel); ++ set_channel_bit(dmac, MASK_ERROR, req->req.channel); ++ if (req->req.block_complete) ++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel); ++ else ++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel); + -+#define DW_DMAC_STATUS_INT 0x360 ++ return 0; + -+#define DW_DMAC_CHAN_SAR 0x000 -+#define DW_DMAC_CHAN_DAR 0x008 -+#define DW_DMAC_CHAN_LLP 0x010 -+#define DW_DMAC_CHAN_CTL 0x018 -+#define DW_DMAC_CHAN_SSTAT 0x020 -+#define DW_DMAC_CHAN_DSTAT 0x028 -+#define DW_DMAC_CHAN_SSTATAR 0x030 -+#define DW_DMAC_CHAN_DSTATAR 0x038 -+#define DW_DMAC_CHAN_CFG 0x040 -+#define DW_DMAC_CHAN_SGR 0x048 -+#define DW_DMAC_CHAN_DSR 0x050 ++out_unclaim_channel: ++ chan->state = CH_STATE_ALLOCATED; ++ return ret; ++} + -+#endif /* __AVR32_DW_DMAC_H__ */ -diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/Makefile linux-avr32.git/arch/avr32/drivers/Makefile ---- linux-2.6.22.1/arch/avr32/drivers/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/arch/avr32/drivers/Makefile 2007-06-06 11:33:46.000000000 +0200 -@@ -0,0 +1 @@ -+obj-$(CONFIG_DW_DMAC) += dw-dmac.o -diff -x .git -Nur linux-2.6.22.1/arch/avr32/Kconfig linux-avr32.git/arch/avr32/Kconfig ---- linux-2.6.22.1/arch/avr32/Kconfig 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/Kconfig 2007-07-13 11:24:16.000000000 +0200 -@@ -113,6 +113,13 @@ - bool "ATNGW100 Network Gateway" - endchoice - -+if BOARD_ATSTK1000 -+source "arch/avr32/boards/atstk1000/Kconfig" -+endif -+if BOARD_ATNGW100 -+source "arch/avr32/boards/atngw100/Kconfig" -+endif ++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac, ++ struct dma_request_cyclic *req) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ unsigned long ctlhi, ctllo, cfghi, cfglo; ++ unsigned long block_size; ++ int ret, i, direction; ++ unsigned long flags; + - choice - prompt "Boot loader type" - default LOADER_U_BOOT -@@ -171,6 +178,10 @@ - enabling Nexus-compliant debuggers to keep track of the PID of the - currently executing task. - -+config DW_DMAC -+ tristate "Synopsys DesignWare DMA Controller support" -+ default y if CPU_AT32AP7000 ++ spin_lock_irqsave(&dmac->lock, flags); + - # FPU emulation goes here - - source "kernel/Kconfig.hz" -@@ -185,6 +196,27 @@ - - endmenu - -+menu "Power managment options" ++ block_size = (req->buffer_size/req->periods) >> req->width; + -+menu "CPU Frequency scaling" ++ ret = -EINVAL; ++ if (req->req.channel >= DMAC_NR_CHANNELS ++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED ++ || (req->periods == 0) ++ || block_size > DMAC_MAX_BLOCKSIZE) { ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ return -EINVAL; ++ } + -+source "drivers/cpufreq/Kconfig" ++ chan = &dmac->channel[req->req.channel]; ++ chan->state = CH_STATE_BUSY; ++ chan->is_cyclic = 1; ++ chan->req_cyclic = req; + -+config CPU_FREQ_AT32AP -+ bool "CPU frequency driver for AT32AP" -+ depends on CPU_FREQ && PLATFORM_AT32AP -+ default n -+ help -+ This enables the CPU frequency driver for AT32AP processors. ++ /* ++ * We have marked the channel as busy, so no need to keep the ++ * lock as long as we only touch the channel-specific ++ * registers ++ */ ++ spin_unlock_irqrestore(&dmac->lock, flags); + -+ For details, take a look in . ++ /* ++ Setup ++ */ ++ BUG_ON(req->buffer_size % req->periods); ++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */ + -+ If in doubt, say N. ++ chan->nr_blocks = req->periods; + -+endmenu ++ ret = -EINVAL; ++ cfglo = cfghi = 0; ++ switch (req->direction) { ++ case DMA_DIR_MEM_TO_PERIPH: ++ direction = DMA_TO_DEVICE; ++ cfghi = req->periph_id << (43 - 32); ++ break; + -+endmenu ++ case DMA_DIR_PERIPH_TO_MEM: ++ direction = DMA_FROM_DEVICE; ++ cfghi = req->periph_id << (39 - 32); ++ break; ++ default: ++ goto out_unclaim_channel; ++ } + - menu "Bus options" - - config PCI -diff -x .git -Nur linux-2.6.22.1/arch/avr32/kernel/dma-controller.c linux-avr32.git/arch/avr32/kernel/dma-controller.c ---- linux-2.6.22.1/arch/avr32/kernel/dma-controller.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/arch/avr32/kernel/dma-controller.c 2007-06-06 11:33:46.000000000 +0200 -@@ -0,0 +1,34 @@ -+/* -+ * Preliminary DMA controller framework for AVR32 -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include ++ chan->direction = direction; + -+static LIST_HEAD(controllers); ++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); ++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); + -+int register_dma_controller(struct dma_controller *dmac) -+{ -+ static int next_id; ++ ctlhi = block_size; ++ ctllo = ((req->direction << 20) ++ | (req->width << 4) | (req->width << 1) ++ | (1 << 0)); // interrupt enable + -+ dmac->id = next_id++; -+ list_add_tail(&dmac->list, &controllers); ++ { ++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL; + -+ return 0; -+} -+EXPORT_SYMBOL(register_dma_controller); ++ ret = -ENOMEM; ++ chan->block = allocate_blocks(dmac, req->periods); ++ if (!chan->block) ++ goto out_unclaim_channel; + -+struct dma_controller *find_dma_controller(int id) -+{ -+ struct dma_controller *dmac; ++ if (direction == DMA_TO_DEVICE) ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; ++ else ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; + -+ list_for_each_entry(dmac, &controllers, list) -+ if (dmac->id == id) -+ return dmac; -+ return NULL; -+} -+EXPORT_SYMBOL(find_dma_controller); -diff -x .git -Nur linux-2.6.22.1/arch/avr32/kernel/Makefile linux-avr32.git/arch/avr32/kernel/Makefile ---- linux-2.6.22.1/arch/avr32/kernel/Makefile 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/kernel/Makefile 2007-06-06 11:33:46.000000000 +0200 -@@ -9,6 +9,7 @@ - obj-y += setup.o traps.o semaphore.o ptrace.o - obj-y += signal.o sys_avr32.o process.o time.o - obj-y += init_task.o switch_to.o cpu.o -+obj-y += dma-controller.o - obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o - obj-$(CONFIG_KPROBES) += kprobes.o - -diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c linux-avr32.git/arch/avr32/mach-at32ap/at32ap7000.c ---- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/mach-at32ap/at32ap7000.c 2007-07-12 13:59:49.000000000 +0200 -@@ -17,14 +17,20 @@ - #include - #include - #include --#include - - #include