X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/17c7b6c3fdc48301e50d22cc6138ede16bd1be24..c7fc82bc807876bc2c375055c2e0c65290170a2c:/target/linux/adm5120/files/drivers/net/adm5120sw.h?ds=sidebyside

diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.h b/target/linux/adm5120/files/drivers/net/adm5120sw.h
index a3b4ec017..c7c5ceddc 100644
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.h
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.h
@@ -10,100 +10,9 @@
 #ifndef _INCLUDE_ADM5120SW_H_
 #define _INCLUDE_ADM5120SW_H_
 
-#define SW_BASE	KSEG1ADDR(0x12000000)
-#define SW_DEVS	6
-
-#define ETH_TX_TIMEOUT		HZ*400
-#define ETH_FCS 4;
-
-#define ADM5120_CODE		0x00		/* CPU description */
-#define ADM5120_CODE_PQFP	0x20000000	/* package type */
-#define ADM5120_SW_CONF		0x20            /* Switch configuration register */
-#define ADM5120_SW_CONF_BPM	0x00300000      /* Mask for backpressure mode */
-#define ADM5120_CPUP_CONF	0x24		/* CPU port config */
-#define ADM5120_DISCCPUPORT	0x00000001	/* disable cpu port */
-#define ADM5120_CRC_PADDING	0x00000002	/* software crc */
-#define ADM5120_BTM		0x00000004      /* bridge test mode */
-#define ADM5120_DISUNSHIFT	9
-#define ADM5120_DISUNALL	0x00007e00	/* disable unknown from all */
-#define ADM5120_DISMCSHIFT	16
-#define ADM5120_DISMCALL	0x003f0000	/* disable multicast from all */
-#define ADM5120_PORT_CONF0	0x28
-#define ADM5120_ENMC		0x00003f00	/* Enable MC routing (ex cpu) */
-#define ADM5120_ENBP		0x003f0000	/* Enable Back Pressure */
-#define ADM5120_PORTDISALL     	0x0000003F
-#define ADM5120_VLAN_GI		0x40		/* VLAN settings */
-#define ADM5120_VLAN_GII	0x44
-#define ADM5120_SEND_TRIG	0x48
-#define ADM5120_SEND_TRIG_L	0x00000001
-#define ADM5120_SEND_TRIG_H	0x00000002
-#define ADM5120_MAC_WT0		0x58
-#define ADM5120_MAC_WRITE	0x00000001
-#define ADM5120_MAC_WRITE_DONE	0x00000002
-#define ADM5120_VLAN_EN		0x00000040
-#define ADM5120_MAC_WT1		0x5c
-#define ADM5120_BW_CTL0		0x60		/* Bandwidth control 0 */
-#define ADM5120_BW_CTL1		0x64		/* Bandwidth control 1 */
-#define ADM5120_PHY_CNTL2	0x7c
-#define ADM5120_AUTONEG		0x0000001f	/* Auto negotiate */
-#define ADM5120_NORMAL		0x01f00000	/* PHY normal mode */
-#define ADM5120_AUTOMDIX	0x3e000000	/* Auto MDIX */
-#define ADM5120_PHY_CNTL3	0x80
-#define ADM5120_PHY_NTH		0x00000400
-#define ADM5120_PRI_CNTL	0x84
-#define ADM5120_INT_ST		0xb0
-#define ADM5120_INT_RXH		0x0000004
-#define ADM5120_INT_RXL		0x0000008
-#define ADM5120_INT_HFULL	0x0000010
-#define ADM5120_INT_LFULL	0x0000020
-#define ADM5120_INT_TXH		0x0000001
-#define ADM5120_INT_TXL		0x0000002
-#define ADM5120_INT_MASK	0xb4
-#define ADM5120_INTMASKALL	0x1FDEFFF	/* All interrupts */
-#define ADM5120_INTHANDLE	(ADM5120_INT_RXH | ADM5120_INT_RXL | \
-				 ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
-				 ADM5120_INT_TXH | ADM5120_INT_TXL)
-#define ADM5120_SEND_HBADDR	0xd0
-#define ADM5120_SEND_LBADDR	0xd4
-#define ADM5120_RECEIVE_HBADDR	0xd8
-#define ADM5120_RECEIVE_LBADDR	0xdc
-
-struct adm5120_dma {
-	u32 data;
-	u32 cntl;
-	u32 len;
-	u32 status;
-} __attribute__ ((packed));
-
-#define	ADM5120_DMA_MASK	0x01ffffff
-#define ADM5120_DMA_OWN		0x80000000	/* buffer owner */
-#define ADM5120_DMA_RINGEND	0x10000000	/* Last in DMA ring */
-
-#define ADM5120_DMA_ADDR(ptr)	((u32)(ptr) & ADM5120_DMA_MASK)
-#define ADM5120_DMA_PORTID	0x00007000
-#define ADM5120_DMA_PORTSHIFT	12
-#define ADM5120_DMA_LEN		0x07ff0000
-#define ADM5120_DMA_LENSHIFT	16
-#define ADM5120_DMA_FCSERR	0x00000008
-
-#define ADM5120_DMA_TXH		2
-#define ADM5120_DMA_TXL		64
-#define ADM5120_DMA_RXH		2
-#define ADM5120_DMA_RXL		64
-
-#define ADM5120_DMA_RXSIZE	1550
-#define ADM5120_DMA_EXTRA	20
-
-struct adm5120_sw {
-	int			port;
-	struct net_device_stats	stats;
-};
-
 #define SIOCSMATRIX	SIOCDEVPRIVATE
 #define SIOCGMATRIX	SIOCDEVPRIVATE+1
 #define SIOCGADMINFO	SIOCDEVPRIVATE+2
-#define SIOCGETBW	SIOCDEVPRIVATE+3
-#define SIOCSETBW	SIOCDEVPRIVATE+4
 
 struct adm5120_sw_info {
 	u16	magic;