X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/2307fc302d5967b44b15e7e7da85c23978f86ff0..b6e8369fc62e7fbcdebf7dce0e3a6388ea53a879:/package/broadcom-diag/src/diag.c diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index 8f2a0c170..fefd036c7 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -19,7 +19,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * $Id$ */ #include #include @@ -55,18 +54,24 @@ module_param(gpiomask, int, 0644); enum { /* Linksys */ WAP54GV1, + WAP54GV2, WAP54GV3, WRT54GV1, WRT54G, WRTSL54GS, WRT54G3G, + WRT160N, + WRT300NV11, WRT350N, WRT600N, WRT600NV11, + WRT610N, /* ASUS */ WLHDD, WL300G, + WL320GE, + WL330GE, WL500G, WL500GD, WL500GP, @@ -121,11 +126,18 @@ enum { /* D-Link */ DIR130, + DIR320, DIR330, DWL3150, /* Sitecom */ WL105B, + + /* Western Digital */ + WDNetCenter, + + /* Askey */ + RT210W, }; static void __init bcm4780_init(void) { @@ -142,6 +154,21 @@ static void __init bcm4780_init(void) { schedule_timeout(HZ * 5); } +static void __init NetCenter_init(void) { + /* unset pin 6 (+12V) */ + int pin = 1 << 6; + gpio_outen(pin, pin); + gpio_control(pin, 0); + gpio_out(pin, pin); + /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */ + pin = 1 << 1; + gpio_outen(pin, pin); + gpio_control(pin, 0); + gpio_out(pin, pin); + /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */ + bcm4780_init(); +} + static void __init bcm57xx_init(void) { int pin = 1 << 2; @@ -165,6 +192,16 @@ static struct platform_t __initdata platforms[] = { { .name = "wlan", .gpio = 1 << 4 }, }, }, + [WAP54GV2] = { + .name = "Linksys WAP54G V2", + .buttons = { + { .name = "reset", .gpio = 1 << 0 }, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 5, .polarity = REVERSE }, + /* GPIO 6 is b44 (eth0, LAN) PHY power */ + }, + }, [WAP54GV3] = { .name = "Linksys WAP54G V3", .buttons = { @@ -228,6 +265,31 @@ static struct platform_t __initdata platforms[] = { { .name = "3g_blink", .gpio = 1 << 5, .polarity = NORMAL }, }, }, + [WRT160N] = { + .name = "Linksys WRT160N", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "ses_blue", .gpio = 1 << 5, .polarity = REVERSE }, + { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE }, + }, + }, + [WRT300NV11] = { + .name = "Linksys WRT300N V1.1", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, // "Reset" on back panel + { .name = "ses", .gpio = 1 << 4 }, // "Reserved" on top panel + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // "Power" + { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber + { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green + }, + .platform_init = bcm57xx_init, + }, [WRT350N] = { .name = "Linksys WRT350N", .buttons = { @@ -275,6 +337,19 @@ static struct platform_t __initdata platforms[] = { }, .platform_init = bcm57xx_init, }, + [WRT610N] = { + .name = "Linksys WRT610N", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 8 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // Power LED + { .name = "usb", .gpio = 1 << 0, .polarity = REVERSE }, // USB LED + { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED amber + { .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // WiFi protected setup LED blue + }, + }, /* Asus */ [WLHDD] = { .name = "ASUS WL-HDD", @@ -295,6 +370,26 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, }, }, + [WL320GE] = { + .name = "ASUS WL-320gE/WL-320gP", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "power", .gpio = 1 << 2, .polarity = REVERSE }, + { .name = "link", .gpio = 1 << 11, .polarity = REVERSE }, + }, + }, + [WL330GE] = { + .name = "ASUS WL-330gE", + .buttons = { + { .name = "reset", .gpio = 1 << 2 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, + }, + }, [WL500G] = { .name = "ASUS WL-500g", .buttons = { @@ -686,6 +781,20 @@ static struct platform_t __initdata platforms[] = { { .name = "blue", .gpio = 1 << 6}, }, }, + [DIR320] = { + .name = "D-Link DIR-320", + .buttons = { + { .name = "reserved", .gpio = 1 << 6}, + { .name = "reset", .gpio = 1 << 7}, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + { .name = "diag", .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */ + { .name = "red", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "blue", .gpio = 1 << 4, .polarity = REVERSE }, + { .name = "usb", .gpio = 1 << 5, .polarity = NORMAL }, + }, + }, [DIR330] = { .name = "D-Link DIR-330", .buttons = { @@ -719,6 +828,30 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 3}, }, }, + /* Western Digital Net Center */ + [WDNetCenter] = { + .name = "Western Digital NetCenter", + .buttons = { + { .name = "power", .gpio = 1 << 0}, + { .name = "reset", .gpio = 1 << 7}, + }, + .platform_init = NetCenter_init, + }, + /* Askey (and clones) */ + [RT210W] = { + .name = "Askey RT210W", + .buttons = { + /* Power button is hard-wired to hardware reset */ + /* but is also connected to GPIO 7 (probably for bootloader recovery) */ + { .name = "power", .gpio = 1 << 7}, + }, + .leds = { + /* These were verified and named based on Belkin F5D4230-4 v1112 */ + { .name = "connected", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "power", .gpio = 1 << 5, .polarity = REVERSE }, + }, + }, }; static struct platform_t __init *platform_detect(void) @@ -738,6 +871,12 @@ static struct platform_t __init *platform_detect(void) return &platforms[DIR330]; } + /* Based on "wsc_modelname */ + if ((buf = nvram_get("wsc_modelname"))) { + if (!strcmp(buf, "WRT610N")) + return &platforms[WRT610N]; + } + /* Based on "model_no" */ if ((buf = nvram_get("model_no"))) { if (startswith(buf,"WL700")) /* WL700* */ @@ -752,12 +891,16 @@ static struct platform_t __init *platform_detect(void) return &platforms[WL520GC]; if (startswith(buf,"WL520GU-")) /* WL520GU-* */ return &platforms[WL520GU]; + if (startswith(buf,"WL330GE-")) /* WL330GE-* */ + return &platforms[WL330GE]; } /* Based on "ModelId" */ if ((buf = nvram_get("ModelId"))) { if (!strcmp(buf, "WR850GP")) return &platforms[WR850GP]; + if (!strcmp(buf, "WR850G")) + return &platforms[WR850GV2V3]; if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap")) return &platforms[TM2300]; /* Dell TrueMobile 2300 */ if (startswith(buf,"WE800G")) /* WE800G* */ @@ -802,6 +945,9 @@ static struct platform_t __init *platform_detect(void) if (startswith(getvar("pmon_ver"), "CFE")) { /* CFE based - newer hardware */ if (!strcmp(boardnum, "42")) { /* Linksys */ + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1")) + return &platforms[WRT300NV11]; + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1")) return &platforms[WRT350N]; @@ -811,9 +957,14 @@ static struct platform_t __init *platform_detect(void) if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1")) return &platforms[WRTSL54GS]; + if (!strcmp(boardtype, "0x0472")) + return &platforms[WRT160N]; + /* default to WRT54G */ return &platforms[WRT54G]; } + if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446")) + return &platforms[WAP54GV2]; if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) { if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r")) @@ -825,6 +976,8 @@ static struct platform_t __init *platform_detect(void) return &platforms[WL500GP]; else if (!strcmp(boardtype,"0x0472")) return &platforms[WL500W]; + else if (!strcmp(boardtype,"0x467")) + return &platforms[WL320GE]; else return &platforms[WL500GD]; } @@ -835,6 +988,14 @@ static struct platform_t __init *platform_detect(void) if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */ return &platforms[SE505V2]; + if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") && + !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */ + return &platforms[DIR320]; + + if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) { + return &platforms[WDNetCenter]; + } + } else { /* PMON based - old stuff */ if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) && (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) { @@ -864,6 +1025,18 @@ static struct platform_t __init *platform_detect(void) /* unknown asus stuff, probably bcm4702 */ if (startswith(boardnum, "asusX")) return &platforms[ASUS_4702]; + + /* bcm4702 based Askey RT210W clones, Including: + * Askey RT210W (duh?) + * Siemens SE505v1 + * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated) + */ + if (!strcmp(boardtype,"bcm94710r4") + && !strcmp(boardnum ,"100") + && !strcmp(getvar("pmon_ver"),"v1.03.12.bk") + ){ + return &platforms[RT210W]; + } } if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */ @@ -905,14 +1078,14 @@ static void register_buttons(struct button_t *b) gpio_control(platform.button_mask, 0); platform.button_polarity = gpio_in() & platform.button_mask; gpio_intpolarity(platform.button_mask, platform.button_polarity); - gpio_intmask(platform.button_mask, platform.button_mask); + gpio_setintmask(platform.button_mask, platform.button_mask); gpio_set_irqenable(1, button_handler); } static void unregister_buttons(struct button_t *b) { - gpio_intmask(platform.button_mask, 0); + gpio_setintmask(platform.button_mask, 0); gpio_set_irqenable(0, button_handler); } @@ -1087,6 +1260,7 @@ static void register_leds(struct led_t *l) gpio_outen(mask, oe_mask); gpio_control(mask, 0); gpio_out(mask, val); + gpio_setintmask(mask, 0); } static void unregister_leds(struct led_t *l)