X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/270465f3a0e4c09b2d4f9c5b1ac10a83e2841cf5..85dd88a3c6f86d2ecd5c2233aca50752b5ccafbc:/package/broadcom-diag/src/diag.c diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index 4667591a1..00a72e907 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -27,20 +27,12 @@ #include #include #include - -#ifndef LINUX_2_4 #include #include #include +#include #include -extern struct sock *uevent_sock; extern u64 uevent_next_seqnum(void); -#else -#include -#define INIT_WORK INIT_TQUEUE -#define schedule_work schedule_task -#define work_struct tq_struct -#endif #include "gpio.h" #include "diag.h" @@ -60,9 +52,13 @@ enum { WRT54G, WRTSL54GS, WRT54G3G, + WRT54G3GV2_VF, + WRT160N, + WRT300NV11, WRT350N, WRT600N, WRT600NV11, + WRT610N, /* ASUS */ WLHDD, @@ -114,6 +110,8 @@ enum { /* Netgear */ WGT634U, + WNR834BV1, + WNR834BV2, /* Trendware */ TEW411BRPP, @@ -123,11 +121,27 @@ enum { /* D-Link */ DIR130, + DIR320, DIR330, DWL3150, /* Sitecom */ WL105B, + + /* Western Digital */ + WDNetCenter, + + /* Askey */ + RT210W, + + /* OvisLink */ + WL1600GL, + + /* Microsoft */ + MN700, + + /* Edimax */ + PS1208MFG, }; static void __init bcm4780_init(void) { @@ -144,15 +158,28 @@ static void __init bcm4780_init(void) { schedule_timeout(HZ * 5); } +static void __init NetCenter_init(void) { + /* unset pin 6 (+12V) */ + int pin = 1 << 6; + gpio_outen(pin, pin); + gpio_control(pin, 0); + gpio_out(pin, pin); + /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */ + pin = 1 << 1; + gpio_outen(pin, pin); + gpio_control(pin, 0); + gpio_out(pin, pin); + /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */ + bcm4780_init(); +} + static void __init bcm57xx_init(void) { int pin = 1 << 2; -#ifndef LINUX_2_4 /* FIXME: switch comes up, but port mappings/vlans not right */ gpio_outen(pin, pin); gpio_control(pin, 0); gpio_out(pin, pin); -#endif } static struct platform_t __initdata platforms[] = { @@ -240,6 +267,43 @@ static struct platform_t __initdata platforms[] = { { .name = "3g_blink", .gpio = 1 << 5, .polarity = NORMAL }, }, }, + [WRT54G3GV2_VF] = { + .name = "Linksys WRT54G3GV2-VF", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "3g", .gpio = 1 << 5 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "3g_green", .gpio = 1 << 2, .polarity = NORMAL }, + { .name = "3g_blue", .gpio = 1 << 3, .polarity = NORMAL }, + }, + }, + [WRT160N] = { + .name = "Linksys WRT160N", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "ses_blue", .gpio = 1 << 5, .polarity = REVERSE }, + { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE }, + }, + }, + [WRT300NV11] = { + .name = "Linksys WRT300N V1.1", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, // "Reset" on back panel + { .name = "ses", .gpio = 1 << 4 }, // "Reserved" on top panel + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // "Power" + { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber + { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green + }, + .platform_init = bcm57xx_init, + }, [WRT350N] = { .name = "Linksys WRT350N", .buttons = { @@ -287,6 +351,19 @@ static struct platform_t __initdata platforms[] = { }, .platform_init = bcm57xx_init, }, + [WRT610N] = { + .name = "Linksys WRT610N", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 8 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // Power LED + { .name = "usb", .gpio = 1 << 0, .polarity = REVERSE }, // USB LED + { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED amber + { .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // WiFi protected setup LED blue + }, + }, /* Asus */ [WLHDD] = { .name = "ASUS WL-HDD", @@ -295,7 +372,7 @@ static struct platform_t __initdata platforms[] = { }, .leds = { { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, - { .name = "usb", .gpio = 1 << 2, .polarity = NORMAL }, + { .name = "usb", .gpio = 1 << 2, .polarity = REVERSE }, }, }, [WL300G] = { @@ -682,6 +759,28 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 3, .polarity = NORMAL }, }, }, + /* Netgear */ + [WNR834BV1] = { + .name = "Netgear WNR834B V1", + .buttons = { /* TODO: add reset button and confirm LEDs - GPIO from dd-wrt */ }, + .leds = { + { .name = "power", .gpio = 1 << 4, .polarity = REVERSE }, + { .name = "diag", .gpio = 1 << 5, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 6, .polarity = REVERSE }, + }, + }, + /* Netgear */ + [WNR834BV2] = { + .name = "Netgear WNR834B V2", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 2, .polarity = NORMAL }, + { .name = "diag", .gpio = 1 << 3, .polarity = NORMAL }, + { .name = "connected", .gpio = 1 << 7, .polarity = NORMAL }, + }, + }, /* Trendware */ [TEW411BRPP] = { .name = "Trendware TEW411BRP+", @@ -698,8 +797,7 @@ static struct platform_t __initdata platforms[] = { [STI_NAS] = { .name = "SimpleTech SimpleShare NAS", .buttons = { - { .name = "reset", .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state - { .name = "power", .gpio = 1 << 0 }, // on back + { .name = "reset", .gpio = 1 << 0 }, // Power button on back, named reset to enable failsafe. }, .leds = { { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready @@ -718,6 +816,20 @@ static struct platform_t __initdata platforms[] = { { .name = "blue", .gpio = 1 << 6}, }, }, + [DIR320] = { + .name = "D-Link DIR-320", + .buttons = { + { .name = "reserved", .gpio = 1 << 6}, + { .name = "reset", .gpio = 1 << 7}, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + { .name = "diag", .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */ + { .name = "red", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "blue", .gpio = 1 << 4, .polarity = REVERSE }, + { .name = "usb", .gpio = 1 << 5, .polarity = NORMAL }, + }, + }, [DIR330] = { .name = "D-Link DIR-330", .buttons = { @@ -751,6 +863,64 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 3}, }, }, + /* Western Digital Net Center */ + [WDNetCenter] = { + .name = "Western Digital NetCenter", + .buttons = { + { .name = "power", .gpio = 1 << 0}, + { .name = "reset", .gpio = 1 << 7}, + }, + .platform_init = NetCenter_init, + }, + /* Askey (and clones) */ + [RT210W] = { + .name = "Askey RT210W", + .buttons = { + /* Power button is hard-wired to hardware reset */ + /* but is also connected to GPIO 7 (probably for bootloader recovery) */ + { .name = "power", .gpio = 1 << 7}, + }, + .leds = { + /* These were verified and named based on Belkin F5D4230-4 v1112 */ + { .name = "connected", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "power", .gpio = 1 << 5, .polarity = REVERSE }, + }, + }, + [WL1600GL] = { + .name = "OvisLink WL-1600GL", + .buttons = { + { .name = "reset", .gpio = 1 << 3 }, + { .name = "ses", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 5, .polarity = REVERSE }, + { .name = "wps", .gpio = 1 << 2, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE }, + { .name = "connected", .gpio = 1 << 0, .polarity = REVERSE }, + }, + }, + /* Microsoft */ + [MN700] = { + .name = "Microsoft MN-700", + .buttons = { + { .name = "reset", .gpio = 1 << 7 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 6, .polarity = NORMAL }, + }, + }, + /* Edimax */ + [PS1208MFG] = { + .name = "Edimax PS-1208MFG", + .buttons = { + { .name = "reset", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "status", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + }, + }, }; static struct platform_t __init *platform_detect(void) @@ -770,6 +940,12 @@ static struct platform_t __init *platform_detect(void) return &platforms[DIR330]; } + /* Based on "wsc_modelname */ + if ((buf = nvram_get("wsc_modelname"))) { + if (!strcmp(buf, "WRT610N")) + return &platforms[WRT610N]; + } + /* Based on "model_no" */ if ((buf = nvram_get("model_no"))) { if (startswith(buf,"WL700")) /* WL700* */ @@ -838,21 +1014,34 @@ static struct platform_t __init *platform_detect(void) if (startswith(getvar("pmon_ver"), "CFE")) { /* CFE based - newer hardware */ if (!strcmp(boardnum, "42")) { /* Linksys */ + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1")) + return &platforms[WRT300NV11]; + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1")) return &platforms[WRT350N]; if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6")) return &platforms[WRT54G3G]; + if (!strcmp(boardtype, "0x042f") && !strcmp(getvar("model_name"), "WRT54G3GV2-VF")) + return &platforms[WRT54G3GV2_VF]; + if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1")) return &platforms[WRTSL54GS]; + if (!strcmp(boardtype, "0x0472")) + return &platforms[WRT160N]; + /* default to WRT54G */ return &platforms[WRT54G]; } if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446")) return &platforms[WAP54GV2]; + if (!strcmp(boardnum, "8") && !strcmp(boardtype, "0x048e")) + return &platforms[WL1600GL]; + + if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) { if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r")) return &platforms[TM2300V2]; /* Dell TrueMobile 2300 v2 */ @@ -875,6 +1064,21 @@ static struct platform_t __init *platform_detect(void) if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */ return &platforms[SE505V2]; + if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") && + !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */ + return &platforms[DIR320]; + + if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) { + return &platforms[WDNetCenter]; + } + + if (!strcmp(boardtype,"0x0472") && !strcmp(getvar("cardbus"), "1")) { /* Netgear WNR834B V1 and V2*/ + if (!strcmp(boardnum, "08") || !strcmp(boardnum, "8")) + return &platforms[WNR834BV1]; + if (!strcmp(boardnum, "01") || !strcmp(boardnum, "1")) + return &platforms[WNR834BV2]; + } + } else { /* PMON based - old stuff */ if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) && (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) { @@ -886,8 +1090,13 @@ static struct platform_t __init *platform_detect(void) if (simple_strtoul(boardnum, NULL, 0) == 2) return &platforms[WAP54GV1]; } - if (startswith(getvar("hardware_version"), "WL500-")) - return &platforms[WL500G]; + /* MN-700 has also hardware_version 'WL500-...', so use boardnum */ + if (startswith(getvar("hardware_version"), "WL500-")) { + if (!strcmp(getvar("boardnum"), "mn700")) + return &platforms[MN700]; + else + return &platforms[WL500G]; + } if (startswith(getvar("hardware_version"), "WL300-")) { /* Either WL-300g or WL-HDD, do more extensive checks */ if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) && @@ -904,6 +1113,18 @@ static struct platform_t __init *platform_detect(void) /* unknown asus stuff, probably bcm4702 */ if (startswith(boardnum, "asusX")) return &platforms[ASUS_4702]; + + /* bcm4702 based Askey RT210W clones, Including: + * Askey RT210W (duh?) + * Siemens SE505v1 + * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated) + */ + if (!strcmp(boardtype,"bcm94710r4") + && !strcmp(boardnum ,"100") + && !strcmp(getvar("pmon_ver"),"v1.03.12.bk") + ){ + return &platforms[RT210W]; + } } if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */ @@ -924,12 +1145,16 @@ static struct platform_t __init *platform_detect(void) return &platforms[TEW411BRPP]; } - if (startswith(boardnum, "04FN52")) /* SimpleTech SimpleShare */ + if (startswith(boardnum, "04FN")) /* SimpleTech SimpleShare */ return &platforms[STI_NAS]; - if (!strcmp(getvar("boardnum"), "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */ + if (!strcmp(boardnum, "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */ return &platforms[DWL3150]; + if (!strcmp(boardnum, "01") && !strcmp(boardtype, "0x048e") && /* Edimax PS1208MFG */ + !strcmp(getvar("status_gpio"), "1")) /* gpio based detection */ + return &platforms[PS1208MFG]; + /* not found */ return NULL; } @@ -958,7 +1183,6 @@ static void unregister_buttons(struct button_t *b) } -#ifndef LINUX_2_4 static void add_msg(struct event_t *event, char *msg, int argv) { char *s; @@ -975,9 +1199,6 @@ static void hotplug_button(struct work_struct *work) struct event_t *event = container_of(work, struct event_t, wq); char *s; - if (!uevent_sock) - return; - event->skb = alloc_skb(2048, GFP_KERNEL); s = skb_put(event->skb, strlen(event->action) + 2); @@ -985,48 +1206,11 @@ static void hotplug_button(struct work_struct *work) fill_event(event); NETLINK_CB(event->skb).dst_group = 1; - netlink_broadcast(uevent_sock, event->skb, 0, 1, GFP_KERNEL); + broadcast_uevent(event->skb, 0, 1, GFP_KERNEL); kfree(event); } -#else /* !LINUX_2_4 */ -static inline char *kzalloc(unsigned int size, unsigned int gfp) -{ - char *p; - - p = kmalloc(size, gfp); - if (p == NULL) - return NULL; - - memset(p, 0, size); - - return p; -} - -static void add_msg(struct event_t *event, char *msg, int argv) -{ - if (argv) - event->argv[event->anr++] = event->scratch; - else - event->envp[event->enr++] = event->scratch; - - event->scratch += sprintf(event->scratch, "%s", msg) + 1; -} - -static void hotplug_button(struct event_t *event) -{ - char *scratch = kzalloc(256, GFP_KERNEL); - event->scratch = scratch; - - add_msg(event, hotplug_path, 1); - add_msg(event, "button", 1); - fill_event(event); - call_usermodehelper (event->argv[0], event->argv, event->envp); - kfree(scratch); - kfree(event); -} -#endif /* !LINUX_2_4 */ static int fill_event (struct event_t *event) { @@ -1041,20 +1225,14 @@ static int fill_event (struct event_t *event) add_msg(event, buf, 0); snprintf(buf, 128, "SEEN=%ld", event->seen); add_msg(event, buf, 0); -#ifndef LINUX_2_4 snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum()); add_msg(event, buf, 0); -#endif return 0; } -#ifndef LINUX_2_4 static irqreturn_t button_handler(int irq, void *dev_id) -#else -static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs) -#endif { struct button_t *b; u32 in, changed; @@ -1077,11 +1255,7 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs) event->seen = (jiffies - b->seen)/HZ; event->name = b->name; event->action = b->pressed ? "pressed" : "released"; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) INIT_WORK(&event->wq, (void *)(void *)hotplug_button); -#else - INIT_WORK(&event->wq, (void *)(void *)hotplug_button, (void *)event); -#endif schedule_work(&event->wq); } @@ -1175,12 +1349,7 @@ static void led_flash(unsigned long dummy) { static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int len = 0; @@ -1233,12 +1402,7 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int ret = -EINVAL;