X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/27c303501e47f15ba64569c28b1a1a125ba1714b..7406bafce9bc69a29abf1f324a649735687c57fc:/target/linux/ixp4xx/patches-2.6.30/191-cambria_optional_uart.patch

diff --git a/target/linux/ixp4xx/patches-2.6.30/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.30/191-cambria_optional_uart.patch
index 3ffe7151d..f4ce53a40 100644
--- a/target/linux/ixp4xx/patches-2.6.30/191-cambria_optional_uart.patch
+++ b/target/linux/ixp4xx/patches-2.6.30/191-cambria_optional_uart.patch
@@ -106,7 +106,7 @@
  	unsigned int	type;		/* If UPF_FIXED_TYPE */
 --- a/include/linux/serial_core.h
 +++ b/include/linux/serial_core.h
-@@ -270,6 +270,7 @@ struct uart_port {
+@@ -273,6 +273,7 @@ struct uart_port {
  #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
  #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
  #define UPIO_RM9000		(7)			/* RM9000 type IO */
@@ -114,7 +114,7 @@
  
  	unsigned int		read_status_mask;	/* driver specific */
  	unsigned int		ignore_status_mask;	/* driver specific */
-@@ -312,6 +313,7 @@ struct uart_port {
+@@ -315,6 +316,7 @@ struct uart_port {
  
  	unsigned int		mctrl;			/* current modem ctrl settings */
  	unsigned int		timeout;		/* character-based timeout */
@@ -124,7 +124,7 @@
  	unsigned int		custom_divisor;
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -396,6 +396,20 @@ static void mem_serial_out(struct uart_p
+@@ -397,6 +397,20 @@ static void mem_serial_out(struct uart_p
  	writeb(value, p->membase + offset);
  }
  
@@ -145,7 +145,7 @@
  static void mem32_serial_out(struct uart_port *p, int offset, int value)
  {
  	offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -488,6 +502,11 @@ static void set_io_from_upio(struct uart
+@@ -490,6 +504,11 @@ static void set_io_from_upio(struct uart
  		p->serial_out = mem32_serial_out;
  		break;
  
@@ -157,7 +157,7 @@
  #ifdef CONFIG_SERIAL_8250_AU1X00
  	case UPIO_AU:
  		p->serial_in = au_serial_in;
-@@ -518,6 +537,7 @@ serial_out_sync(struct uart_8250_port *u
+@@ -522,6 +541,7 @@ serial_out_sync(struct uart_8250_port *u
  	switch (p->iotype) {
  	case UPIO_MEM:
  	case UPIO_MEM32:
@@ -165,7 +165,7 @@
  #ifdef CONFIG_SERIAL_8250_AU1X00
  	case UPIO_AU:
  #endif
-@@ -2433,6 +2453,7 @@ static int serial8250_request_std_resour
+@@ -2440,6 +2460,7 @@ static int serial8250_request_std_resour
  	case UPIO_MEM32:
  	case UPIO_MEM:
  	case UPIO_DWAPB:
@@ -173,7 +173,7 @@
  		if (!up->port.mapbase)
  			break;
  
-@@ -2470,6 +2491,7 @@ static void serial8250_release_std_resou
+@@ -2477,6 +2498,7 @@ static void serial8250_release_std_resou
  	case UPIO_MEM32:
  	case UPIO_MEM:
  	case UPIO_DWAPB:
@@ -181,7 +181,7 @@
  		if (!up->port.mapbase)
  			break;
  
-@@ -2931,6 +2953,7 @@ static int __devinit serial8250_probe(st
+@@ -2946,6 +2968,7 @@ static int __devinit serial8250_probe(st
  		port.serial_in		= p->serial_in;
  		port.serial_out		= p->serial_out;
  		port.dev		= &dev->dev;
@@ -189,7 +189,7 @@
  		if (share_irqs)
  			port.flags |= UPF_SHARE_IRQ;
  		ret = serial8250_register_port(&port);
-@@ -3080,6 +3103,7 @@ int serial8250_register_port(struct uart
+@@ -3095,6 +3118,7 @@ int serial8250_register_port(struct uart
  		uart->port.iotype       = port->iotype;
  		uart->port.flags        = port->flags | UPF_BOOT_AUTOCONF;
  		uart->port.mapbase      = port->mapbase;
@@ -199,7 +199,7 @@
  			uart->port.dev = port->dev;
 --- a/drivers/serial/serial_core.c
 +++ b/drivers/serial/serial_core.c
-@@ -2142,6 +2142,7 @@ uart_report_port(struct uart_driver *drv
+@@ -2138,6 +2138,7 @@ uart_report_port(struct uart_driver *drv
  		snprintf(address, sizeof(address),
  			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
  		break;
@@ -207,7 +207,7 @@
  	case UPIO_MEM:
  	case UPIO_MEM32:
  	case UPIO_AU:
-@@ -2556,6 +2557,7 @@ int uart_match_port(struct uart_port *po
+@@ -2552,6 +2553,7 @@ int uart_match_port(struct uart_port *po
  	case UPIO_HUB6:
  		return (port1->iobase == port2->iobase) &&
  		       (port1->hub6   == port2->hub6);