X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/297e15bc7053d87ae683c9bdbdb8da16e09c7c1b..0432b2b9b938198359cb9e980a72358278f047bb:/target/linux/generic/patches-2.6.36/941-ssb_update.patch?ds=inline diff --git a/target/linux/generic/patches-2.6.36/941-ssb_update.patch b/target/linux/generic/patches-2.6.36/941-ssb_update.patch index f83923102..9f8dfb878 100644 --- a/target/linux/generic/patches-2.6.36/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.36/941-ssb_update.patch @@ -1,6 +1,23 @@ --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -384,6 +384,35 @@ static int ssb_device_uevent(struct devi +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -384,6 +385,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -36,7 +53,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -393,6 +422,7 @@ static struct bus_type ssb_bustype = { +@@ -393,6 +423,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -44,7 +61,7 @@ }; static void ssb_buses_lock(void) -@@ -528,7 +558,7 @@ error: +@@ -528,7 +559,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -53,7 +70,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -739,9 +769,9 @@ out: +@@ -739,9 +770,9 @@ out: return err; } @@ -66,7 +83,7 @@ { int err; -@@ -822,8 +852,8 @@ err_disable_xtal: +@@ -822,8 +853,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -77,7 +94,7 @@ { int err; -@@ -846,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -846,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -90,7 +107,7 @@ { int err; -@@ -868,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -868,8 +899,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -102,7 +119,7 @@ { int err; -@@ -889,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -889,9 +921,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -115,7 +132,7 @@ { int err; -@@ -972,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -972,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -126,7 +143,7 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1088,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1088,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -157,7 +174,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1163,10 +1193,10 @@ void ssb_device_enable(struct ssb_device +@@ -1163,10 +1194,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -171,7 +188,7 @@ { int i; u32 val; -@@ -1174,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1174,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -180,7 +197,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1191,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1191,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -228,19 +245,43 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1219,7 +1267,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1213,13 +1262,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (pci_is_pcie(dev->bus->host_pci) && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } -@@ -1262,20 +1313,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1262,20 +1332,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -265,7 +306,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1283,6 +1334,37 @@ error: +@@ -1283,6 +1353,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -305,6 +346,15 @@ u32 base = 0; --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss out->antenna_gain.ghz5.a3 = gain; } @@ -367,7 +417,7 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -471,6 +515,8 @@ static void sprom_extract_r45(struct ssb +@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); @@ -376,16 +426,85 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -561,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ } -@@ -573,37 +621,34 @@ static int sprom_extract(struct ssb_bus +@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -444,7 +563,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -617,15 +662,14 @@ static int sprom_extract(struct ssb_bus +@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -462,7 +581,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -645,7 +689,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -471,7 +590,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -655,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -501,7 +620,7 @@ err = 0; goto out_free; } -@@ -677,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -526,6 +645,15 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c +@@ -6,7 +6,7 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -53,12 +53,13 @@ static int ssb_pcihost_resume(struct pci # define ssb_pcihost_resume NULL #endif /* CONFIG_PM */ @@ -566,6 +694,15 @@ driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -259,7 +259,10 @@ static int we_support_multiple_80211_cor #ifdef CONFIG_SSB_PCIHOST if (bus->bustype == SSB_BUSTYPE_PCI) { @@ -620,16 +757,32 @@ } --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,6 +27,8 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,8 +31,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -55,6 +57,10 @@ struct ssb_sprom { +@@ -55,6 +63,10 @@ struct ssb_sprom { u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ @@ -640,7 +793,32 @@ u8 rxpo2g; /* 2GHz RX power offset */ u8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -95,7 +101,7 @@ struct ssb_sprom { +@@ -76,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -88,6 +102,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -95,7 +118,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -649,7 +827,21 @@ }; -@@ -304,7 +310,7 @@ struct ssb_bus { +@@ -225,10 +248,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -304,7 +326,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -658,7 +850,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -400,7 +406,9 @@ extern bool ssb_is_sprom_available(struc +@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -669,7 +861,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -514,6 +522,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -792,8 +984,128 @@ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +@@ -386,6 +432,56 @@ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -410,12 +506,53 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; @@ -894,6 +1206,15 @@ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; @@ -913,6 +1234,15 @@ * min_msk = 0xCBB --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige gige_write32(dev, SSB_GIGE_PCICFG + offset, value); } @@ -949,6 +1279,15 @@ u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -979,7 +1318,7 @@ { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -403,25 +408,133 @@ static int pcicore_is_in_hostmode(struct +@@ -403,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -1092,10 +1431,15 @@ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -1117,7 +1461,7 @@ if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -446,11 +559,35 @@ static void ssb_pcie_write(struct ssb_pc +@@ -446,11 +563,35 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -1155,7 +1499,7 @@ u32 v; int i; -@@ -458,46 +595,68 @@ static void ssb_pcie_mdio_write(struct s +@@ -458,46 +599,68 @@ static void ssb_pcie_mdio_write(struct s v |= 0x2; /* MDIO Clock Divisor */ pcicore_write32(pc, mdio_control, v); @@ -1247,7 +1591,7 @@ } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -550,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -550,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -1300,6 +1644,15 @@ out: --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,7 +17,7 @@ #include @@ -1327,21 +1680,23 @@ + * callback handler which fills the SPROM data structure. The fallback is + * only used for PCI based SSB devices, where no valid SPROM can be found + * in the shadow registers. - * -- * This function is useful for weird architectures that have a half-assed SSB device -- * hardwired to their PCI bus. ++ * + * This function is useful for weird architectures that have a half-assed + * SSB device hardwired to their PCI bus. - * -- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently -- * don't use this fallback. -- * Architectures must provide the SPROM for native SSB devices anyway, -- * so the fallback also isn't used for native devices. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so + * the fallback also isn't used for native devices. * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. +- * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * - * This function is available for architecture code, only. So it is not exported. + * This function is available for architecture code, only. So it is not + * exported. @@ -1393,6 +1748,15 @@ /* core.c */ --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 @@ -1425,3 +1789,75 @@ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + *