X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/375bfab5d5bf685ac66e28f23da33e8a995d6a2c..6a049752ccff22b951a64ba348a7b88260565a83:/scripts/slugimage.pl

diff --git a/scripts/slugimage.pl b/scripts/slugimage.pl
index 541325dd6..e46152166 100755
--- a/scripts/slugimage.pl
+++ b/scripts/slugimage.pl
@@ -391,10 +391,9 @@ sub readInFirmware {
     my($filename, $partitions_ref) = @_;
 
     my($firmware_buf);
-    my($total_length)   = 0x800000;
 
     open FILE,$filename or die "Can't find firmware image \"$filename\": $!\n";
-    read FILE,$firmware_buf,$total_length or die "Can't read $total_length bytes from \"$filename\": $!\n";
+    read FILE,$firmware_buf,$flash_len or die "Can't read $flash_len bytes from \"$filename\": $!\n";
     close FILE or die "Can't close \"$filename\": $!\n";
 
     $debug and printf("Read 0x%08X bytes from \"%s\"\n", length($firmware_buf), $filename);
@@ -410,7 +409,7 @@ sub readInFirmware {
 	    }
 	    else {
 
-		# Slurp up the data, based on whether a header is present or not
+		# Slurp up the data, based on whether a header and/or data is present or not
 		if ($_->{'header'}) {
 
 		    # Read the length, and grab the data based on the length.
@@ -422,6 +421,11 @@ sub readInFirmware {
 			$_->{'data'} = substr($firmware_buf, $_->{'offset'} + $_->{'header'}, $data_len);
 		    }
 		}
+		elsif ($_->{'pseudo'} and not defined $_->{'file'} and
+		       (substr($firmware_buf, $_->{'offset'}, $_->{'size'}) eq
+			(pack("C", 0xff) x $_->{'size'}))) {
+		    $debug and printf("Skipping empty pseudo partition <%s>\n", $_->{'name'});
+		}
 		else {
 
 		    # Grab the whole partition, using the maximum size.
@@ -557,6 +561,11 @@ sub readInFirmwareParts {
 sub layoutPartitions {
     my(@partitions) = @_;
 
+    # Find the kernel partition, and save a pointer to it for later use
+    my $kernel;
+    map { ($_->{'name'} eq "Kernel") && ($kernel = $_); } @partitions;
+    $kernel or die "Couldn't find the kernel partition\n";
+
     # Find the last variable size partition, and save a pointer to it for later use
     my $lastdisk;
     my $directory_offset;
@@ -588,66 +597,33 @@ sub layoutPartitions {
 
 	$debug and printf("Pointer is 0x%08X\n", $pointer);
 
-	# If this is the last variable size partition, then fill the rest of the space.
-	if ($_->{'name'} eq $lastdisk->{'name'}) {
-	    $_->{'size'} = paddedSize($directory_offset + $flash_start - $pointer);
-	    $debug and printf("Padding last variable partition <%s> to 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
-	}
-
-	# Handle requests for partition creation first.
-	if (defined $_->{'size'} and not defined $_->{'data'} and ($_->{'name'} ne "FIS directory")) {
-
-	    # A zero size is a request to fill all available space.
-	    if ($_->{'size'} == 0) {
-		# Grab the start of the FIS directory, and use all the space up to there.
-		$_->{'size'} = paddedSize($directory_offset + $flash_start - $pointer);
-
-		# Create an empty partition of the requested size.
-		$_->{'data'} = padBytes("", $_->{'size'});
-		
-		$debug and printf("Creating empty partition <%s> of 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
-	    }
-
-	    if (not defined $_->{'offset'}) {
-		# Check to make sure that the requested size is not too large.
-		if (($pointer + $_->{'size'}) > ($flash_start + $directory_offset)) {
-		    die "Ran out of flash space in <", $_->{'name'}, ">\n";
-		}
-	    }
-	    else {
-		# Check to make sure that the requested size is not too large.
-		if (($_->{'offset'} + $_->{'size'}) > ($flash_start + $directory_offset)) {
-		    die "Ran out of flash space in <", $_->{'name'}, ">\n";
-		}
+	# Determine the start and offset of the current partition.
+	if (defined $_->{'offset'}) {
+	    $_->{'start'} = $flash_start + $_->{'offset'};
+	    # Check for running past the defined start of the partition.
+	    if (($pointer > $_->{'start'}) and not $_->{'pseudo'}) {
+		die sprintf("Ran out of flash space before <%s> - %s too large.\n", $_->{'name'},
+			    sprintf("0x%05X bytes", ($pointer - $_->{'start'})));
 	    }
 	}
 
-	# Then handle known partitions, and allocate them.
-	if (defined $_->{'size'}) {
-
-	    # Determine the start and offset of the current partition.
-	    if (defined $_->{'offset'}) {
-		$_->{'start'} = $flash_start + $_->{'offset'};
-	    }
-
-	    # If offset is not defined, then calculate it.
-	    else {
-		$_->{'start'} = $pointer;
-		$_->{'offset'} = $_->{'start'} - $flash_start;
-	    }
+	# If offset is not defined, then calculate it.
+	else {
+	    $_->{'start'} = $pointer;
+	    $_->{'offset'} = $_->{'start'} - $flash_start;
+	}
 
-	    my $size = defined $_->{'data'} ? length($_->{'data'}) : 0;
+	my $size = defined $_->{'data'} ? length($_->{'data'}) : 0;
 
-	    # Add skip regions for the partitions with headers.
-	    if ($_->{'header'} > 0) {
-		# Define the skip region for the initial Sercomm header.
-		push(@{$_->{'skips'}},
-		     { 'offset' => 0, 'size' => $_->{'header'}, 'data' => undef });
-		# Allow for the Sercomm header to be prepended to the data.
-		$size += $_->{'header'};
-	    }
+	# Add skip regions for the partitions with headers.
+	if ($_->{'header'} > 0) {
+	    # Define the skip region for the initial Sercomm header.
+	    push(@{$_->{'skips'}},
+		 { 'offset' => 0, 'size' => $_->{'header'}, 'data' => undef });
+	    # Allow for the Sercomm header to be prepended to the data.
+	    $size += $_->{'header'};
 
-	    # Determine if the partition requires a Sercomm skip region.
+	    # Determine if the partition overlaps the ramdisk boundary.
 	    if (($_->{'offset'} < $ramdisk_offset) and
 		(($_->{'offset'} + $size) > $ramdisk_offset)) {
 		# Define the skip region for the inline Sercomm header.
@@ -657,36 +633,64 @@ sub layoutPartitions {
 		# Allow for the Sercomm header to be inserted in the data.
 		$size += 16;
 	    }
+	}
 
-	    # Extend to another block if required.
-	    if ($size > $_->{'size'}) {
-		$_->{'size'} = $size;
-		printf("Extending partition <%s> to 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
-	    }
+	# Partitions without headers cannot have skip regions.
+	elsif (($_->{'offset'} <= $ramdisk_offset) and
+	       (($_->{'offset'} + $size) > $ramdisk_offset)) {
+	    # Pad the kernel until it extends past the ramdisk offset.
+	    push(@{$kernel->{'skips'}},
+		 { 'offset' => ($ramdisk_offset - $kernel->{'offset'}), 'size' => 16,
+		   'data' => pack("N4", $block_size) });
+	    $kernel->{'size'} = $ramdisk_offset - $kernel->{'offset'} + $block_size;
+	    $kernel->{'data'} = padBytes($kernel->{'data'},
+					 $kernel->{'size'} - $kernel->{'header'} - 16);
+	    $_->{'offset'} = $ramdisk_offset + $block_size;
+	    $_->{'start'} = $flash_start + $_->{'offset'};
+	    $pointer = $_->{'start'};
+	    $debug and printf("Extending kernel partition past ramdisk offset.\n");
+	}
 
-	    # Keep the user appraised ...
-	    $debug and printf("Allocated <%s> from 0x%08X to 0x%08X (%s / %s)\n",
-			      $_->{'name'}, $_->{'start'}, $_->{'start'} + $_->{'size'},
-			      ($size >= $block_size ?
-			       sprintf("%d blocks", numBlocks($size)) :
-			       sprintf("0x%05X bytes", $size)),
-			      ($_->{'size'} >= $block_size ?
-			       sprintf("%d blocks", numBlocks($_->{'size'})) :
-			       sprintf("0x%05X bytes", $_->{'size'})));
+	# If this is the last variable size partition, then fill the rest of the space.
+	if ($_->{'name'} eq $lastdisk->{'name'}) {
+	    $_->{'size'} = paddedSize($directory_offset + $flash_start - $pointer);
+	    $debug and printf("Padding last variable partition <%s> to 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
+	}
+
+	die sprintf("Partition size not defined in <%s>.\n", $_->{'name'})
+	    unless defined $_->{'size'};
 
-	    # Check to make sure we have not run out of room.
-	    if (($_->{'start'} + $_->{'size'}) > ($flash_start + $flash_len)) {
-		die "Ran out of flash space in <", $_->{'name'}, ">\n";
+	# Extend to another block if required.
+	if ($size > $_->{'size'}) {
+	    if ($_->{'name'} eq $lastdisk->{'name'}) {
+		die sprintf("Ran out of flash space in <%s> - %s too large.\n", $_->{'name'},
+			    sprintf("0x%05X bytes", ($size - $_->{'size'})));
 	    }
+	    $_->{'size'} = $size;
+	    printf("Extending partition <%s> to 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
+	}
 
-	    $debug and printf("Moving pointer from 0x%08X to 0x%08X (0x%08X + 0x%08X)\n",
-			      $pointer, paddedSize($_->{'start'} + $_->{'size'}),
-			      $_->{'start'}, $_->{'size'});
+	# Keep the user appraised ...
+	$debug and printf("Allocated <%s> from 0x%08X to 0x%08X (%s / %s)\n",
+			  $_->{'name'}, $_->{'start'}, $_->{'start'} + $_->{'size'},
+			  ($size >= $block_size ?
+			   sprintf("%d blocks", numBlocks($size)) :
+			   sprintf("0x%05X bytes", $size)),
+			  ($_->{'size'} >= $block_size ?
+			   sprintf("%d blocks", numBlocks($_->{'size'})) :
+			   sprintf("0x%05X bytes", $_->{'size'})));
+
+	# Check to make sure we have not run out of room.
+	if (($_->{'start'} + $_->{'size'}) > ($flash_start + $flash_len)) {
+	    die "Ran out of flash space in <", $_->{'name'}, ">\n";
+	}
 
-	    # Move the pointer up, in preparation for the next partition.
-	    $pointer = paddedSize($_->{'start'} + $_->{'size'});
+	$debug and printf("Moving pointer from 0x%08X to 0x%08X (0x%08X + 0x%08X)\n",
+			  $pointer, paddedSize($_->{'start'} + $_->{'size'}),
+			  $_->{'start'}, $_->{'size'});
 
-	}
+	# Move the pointer up, in preparation for the next partition.
+	$pointer = paddedSize($_->{'start'} + $_->{'size'});
 
     } @partitions;
 
@@ -916,7 +920,7 @@ sub defaultPartitions {
 	     'offset'=>0x007f8000,        'size'=>0x00004000,
 	     'variable'=>0, 'header'=>0,  'pseudo'=>1, 'data'=>undef, 'byteswap'=>0},
 	    {'name'=>'Microcode',	  'file'=>'NPE-B',
-	     'offset'=>0x007fc000,        'size'=>0x00003ff0,
+	     'offset'=>0x007fc000,        'size'=>0x00003fe0,
 	     'variable'=>0, 'header'=>16, 'pseudo'=>1, 'data'=>undef, 'byteswap'=>0},
 	    {'name'=>'Trailer',           'file'=>'Trailer',
 	     'offset'=>0x007ffff0,        'size'=>0x00000010,
@@ -925,7 +929,7 @@ sub defaultPartitions {
 
 # Main routine starts here ...
 
-my($unpack, $pack, $little, $input, $output, $redboot);
+my($unpack, $pack, $little, $fatflash, $input, $output, $redboot);
 my($kernel, $sysconf, $ramdisk, $fisdir);
 my($microcode, $trailer, $ethaddr, $loader);
 
@@ -941,6 +945,7 @@ if (!GetOptions("d|debug"       => \$debug,
 		"u|unpack"      => \$unpack,
 		"p|pack"        => \$pack,
 		"l|little"      => \$little,
+		"F|fatflash"    => \$fatflash,
 		"i|input=s"     => \$input,
 		"o|output=s"    => \$output,
 		"b|redboot=s"   => \$redboot,
@@ -960,6 +965,7 @@ if (!GetOptions("d|debug"       => \$debug,
     print "  [-u|--unpack]			Unpack a firmware image\n";
     print "  [-p|--pack]			Pack a firmware image\n";
     print "  [-l|--little]			Convert Kernel and Ramdisk to little-endian\n";
+    print "  [-F|--fatflash]			Generate an image for 16MB flash\n";
     print "  [-i|--input]     <file>		Input firmware image filename\n";
     print "  [-o|--output]    <file>		Output firmware image filename\n";
     print "  [-b|--redboot]   <file>		Input/Output RedBoot filename\n";
@@ -1042,6 +1048,18 @@ if (defined $little)  {
     } @partitions;
 }
 
+if (defined $fatflash)  {
+    $flash_len = 0x01000000;
+    map {
+	if (($_->{'name'} eq 'FIS directory') or
+	    ($_->{'name'} eq 'Loader config') or
+	    ($_->{'name'} eq 'Microcode') or
+	    ($_->{'name'} eq 'Trailer')) {
+	    $_->{'offset'} += 0x00800000;
+	}
+    } @partitions;
+}
+
 if (defined $ethaddr) {
     map {
 	if ($_->{'name'} eq 'EthAddr') {
@@ -1110,10 +1128,7 @@ if (defined $ramdisk) {
 	    if (defined $size) {
 		$entry{'size'} = $size * $block_size;
 		# Create an empty partition of the requested size.
-		$entry{'data'} = padBytes("", $entry{'size'});
-		if ($entry{'header'}) {
-		    $entry{'data'} = padBytes("", $entry{'size'} - $entry{'header'});
-		}
+		$entry{'data'} = padBytes("", $entry{'size'} - $entry{'header'});
 	    }
 
 	    \%entry;