X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/3ac1acb9ea70080aaaf49ae211835f057e60eefa..81ed13cf894dfe1ed66fd5940c0be512586f6e15:/obsolete-buildroot/Makefile diff --git a/obsolete-buildroot/Makefile b/obsolete-buildroot/Makefile index 96fa2494a..304c802b8 100644 --- a/obsolete-buildroot/Makefile +++ b/obsolete-buildroot/Makefile @@ -28,63 +28,24 @@ # ############################################################# -# What sortof target system shall we compile this for? -#ARCH:=i386 -#ARCH:=arm -#ARCH:=mips +SNAPSHOT:=20040705 + ARCH:=mipsel -#ARCH:=powerpc -#ARCH:=sh4 -# Busybox link failing due to needing libgcc functions that are statics. -#ARCH:=cris - -# The following currently fail to build since no shared lib support. -#ARCH:=sh64 -#ARCH:=m68k -#ARCH:=v850 -#ARCH:=sparc -#ARCH:=whatever - -# If you are building a native gcc toolchain, do you want to -# build the old gcc-2.95 based toolchain, or would you prefer -# a nice and shiny new gcc-3.3.2 toolchain? -# WARNING -- 2.95 currently only builds for i386, arm, mips*, and powerpc. -# WARNING -- 2.95 does not currently build natively for the target. -GCC_2_95_TOOLCHAIN:=false - -# Enable this to use the uClibc daily snapshot instead of a released -# version. Daily snapshots may contain new features and bugfixes. Or -# they may not even compile at all, depending on what Erik is doing... -#USE_UCLIBC_SNAPSHOT:= -#USE_UCLIBC_SNAPSHOT:=snapshot -USE_UCLIBC_SNAPSHOT:=20040509 - -# Temporary option... Fall back to (slightly modified) ldso 0.9.24 code? -# This is here temporarily since I'm having problems with the current -# cvs ldso code on mipsel. -USE_UCLIBC_LDSO_0_9_24:=true -#USE_UCLIBC_LDSO_0_9_24:=false - -# Enable this to use the busybox daily snapshot instead of a released -# version. Daily snapshots may contain new features and bugfixes. Or -# they may not even compile at all.... -#USE_BUSYBOX_SNAPSHOT:= -#USE_BUSYBOX_SNAPSHOT:=snapshot -USE_BUSYBOX_SNAPSHOT:=20040509 - -# Enable large file (files > 2 GB) support +USE_UCLIBC_SNAPSHOT:=$(SNAPSHOT) +USE_UCLIBC_LDSO_0_9_24:=false +USE_BUSYBOX_SNAPSHOT:=$(SNAPSHOT) +USE_NETFILTER_SNAPSHOT:=$(SNAPSHOT) +USE_BRIDGE_VERSION:=0.9.7 BUILD_WITH_LARGEFILE:=true +OPTIMIZE_FOR_CPU=$(ARCH) + +# directory used by 'make publish' +PUB_DIR:=/var/www/html/testsite/ipkg + # Command used to download source code WGET:=wget --passive-ftp -# Optimize toolchain for which type of CPU? -OPTIMIZE_FOR_CPU=$(ARCH) -#OPTIMIZE_FOR_CPU=i686 -# Note... gcc 2.95 does not seem to like anything higher than i586. -#OPTIMIZE_FOR_CPU=i586 -#OPTIMIZE_FOR_CPU=whatever - # Soft floating point options. # Notes: # Currently builds with gcc 3.3 for arm, mips, mipsel, powerpc. @@ -106,8 +67,8 @@ TARGET_DEBUGGING= #-g # Currently the unwind stuff seems to work for staticly linked apps but # not dynamic. So use setjmp/longjmp exceptions by default. -GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions -#GCC_USE_SJLJ_EXCEPTIONS:= +# GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions +GCC_USE_SJLJ_EXCEPTIONS:= # Any additional gcc options you may want to include.... EXTRA_GCC_CONFIG_OPTIONS:= @@ -137,85 +98,9 @@ INSTALL_LIBGCJ:=false # The list of stuff to build for the target filesystem # ############################################################# -TARGETS:=host-sed - -ifeq ($(GCC_2_95_TOOLCHAIN),true) -TARGETS+=uclibc-configured binutils gcc2_95 -else -TARGETS+=uclibc-configured binutils gcc3_3 -endif - -# Do you want user mode Linux (x86 only), or are you building a -# your own kernel that will run on its own? Perhaps you have a -# kernel you have already configured and you want to use that? -# The default is to just use a set of known working kernel -# headers. Unless you want to build a kernel, I recommend just -# using that... -#TARGETS+=kernel-headers -#TARGETS+=linux -#TARGETS+=user-mode-linux -#TARGETS+=system-linux -TARGETS+= openwrt-base - -# The default minimal set -#TARGETS+=busybox tinylogin - -# Openssh... -#TARGETS+=zlib openssl openssh -# Dropbear sshd is much smaller than openssl + openssh -#TARGETS+=dropbear_sshd - -# Everything needed to build a full uClibc development system! -#TARGETS+=coreutils findutils bash make diffutils patch sed -#TARGETS+=ed flex bison file gawk tar grep bzip2 - -#If you want a development system, you probably want gcc built -# with uClibc so it can run within your dev system... -#TARGETS+=gcc2_95_target ccache_target # NOT WORKING!!! -#TARGETS+=gcc3_3_target ccache_target - -# Of course, if you are installing a development system, you -# may want some header files so you can compile stuff.... -#TARGETS+=ncurses-headers zlib-headers openssl-headers - -# More development system stuff for those that want it -#TARGETS+=m4 autoconf automake libtool - -# Perl -#TARGETS+=perl +TARGETS:=host-sed gcc3_3 ipkg-utils openwrt-base openwrt-code.bin -# Some nice debugging tools -#TARGETS+=gdb strace ltrace - -# The Valgrind debugger (x86 only) -#TARGETS+=valgrind - -# Some stuff for access points and firewalls -#TARGETS+=iptables hostap wtools dhcp_relay bridge -#TARGETS+=iproute2 netsnmp - -# Run customize.mk at the very end to add your own special config. -# This is useful for making your own distro within the buildroot -# process. -# TARGETS+=customize - -############################################################# -# -# Pick your root filesystem type. -# -############################################################# -#TARGETS+=ext2root - -# Must mount cramfs with 'ramdisk_blocksize=4096' -#TARGETS+=cramfsroot - -# You may need to edit make/jffs2root.mk to change target -# endian-ness or similar, but this is sufficient for most -# things as-is... -#TARGETS+=jffs2root - -#TARGETS+= openwrt-linux.trx -TARGETS+= openwrt-code.bin +PACKAGES:=oidentd iproute2 sched-modules wshaper ############################################################# # @@ -296,14 +181,20 @@ else DISABLE_NLS:=--disable-nls endif - all: world TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS)) TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS)) TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS)) -world: $(DL_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS) + +PACKAGES_IPK:=$(patsubst %,%-ipk,$(PACKAGES)) +OPENWRT_IPK_DIR=$(SOURCE_DIR)/openwrt/ipkg + +$(BUILD_DIR)/Packages : $(PACKAGES_IPK) + (cd $(BUILD_DIR) ; $(IPKG_MAKE_INDEX) . > Packages) + +world: $(DL_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS) $(PACKAGES_IPK) $(BUILD_DIR)/Packages @echo "ALL DONE." .PHONY: all world clean dirclean distclean source $(TARGETS) \ @@ -334,9 +225,7 @@ $(STAGING_DIR): $(TARGET_DIR): $(DL_DIR)/$(OPENWRT_ROOT_SKEL) rm -rf $(TARGET_DIR) - #zcat $(SOURCE_DIR)/skel.tar.gz | tar -C $(BUILD_DIR) -xf - zcat $(DL_DIR)/$(OPENWRT_ROOT_SKEL) | tar -C $(BUILD_DIR) -xf - - #cp -a $(SOURCE_DIR)/target_skeleton/* $(TARGET_DIR)/ -find $(TARGET_DIR) -type d -name CVS -exec rm -rf {} \; > /dev/null 2>&1 source: $(TARGETS_SOURCE) @@ -361,6 +250,14 @@ distclean: openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \ openwrt-kmodules.tar.bz2 +publish: + chmod 644 $(BUILD_DIR)/Packages + chmod 644 $(BUILD_DIR)/Packages.filelist + chmod 644 $(BUILD_DIR)/*.ipk + cp $(BUILD_DIR)/Packages $(PUB_DIR) + cp $(BUILD_DIR)/Packages.filelist $(PUB_DIR) + cp $(BUILD_DIR)/*.ipk $(PUB_DIR) + sourceball: rm -rf $(BUILD_DIR) set -e; \