X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/3ac1acb9ea70080aaaf49ae211835f057e60eefa..cb3aa85fe639602efb93d4d05d4d02cfe6502692:/obsolete-buildroot/Makefile

diff --git a/obsolete-buildroot/Makefile b/obsolete-buildroot/Makefile
index 96fa2494a..45c1e85df 100644
--- a/obsolete-buildroot/Makefile
+++ b/obsolete-buildroot/Makefile
@@ -28,63 +28,21 @@
 #
 #############################################################
 
-# What sortof target system shall we compile this for?
-#ARCH:=i386
-#ARCH:=arm
-#ARCH:=mips
+SNAPSHOT:=20050101
+
 ARCH:=mipsel
-#ARCH:=powerpc
-#ARCH:=sh4
-# Busybox link failing due to needing libgcc functions that are statics.
-#ARCH:=cris
-
-# The following currently fail to build since no shared lib support.
-#ARCH:=sh64
-#ARCH:=m68k
-#ARCH:=v850
-#ARCH:=sparc
-#ARCH:=whatever
-
-# If you are building a native gcc toolchain, do you want to
-# build the old gcc-2.95 based toolchain, or would you prefer
-# a nice and shiny new gcc-3.3.2 toolchain?
-# WARNING -- 2.95 currently only builds for i386, arm, mips*, and powerpc.
-# WARNING -- 2.95 does not currently build natively for the target.
-GCC_2_95_TOOLCHAIN:=false
-
-# Enable this to use the uClibc daily snapshot instead of a released
-# version.  Daily snapshots may contain new features and bugfixes. Or
-# they may not even compile at all, depending on what Erik is doing...
-#USE_UCLIBC_SNAPSHOT:=
-#USE_UCLIBC_SNAPSHOT:=snapshot
-USE_UCLIBC_SNAPSHOT:=20040509
-
-# Temporary option... Fall back to (slightly modified) ldso 0.9.24 code?
-# This is here temporarily since I'm having problems with the current
-# cvs ldso code on mipsel.
-USE_UCLIBC_LDSO_0_9_24:=true
-#USE_UCLIBC_LDSO_0_9_24:=false
-
-# Enable this to use the busybox daily snapshot instead of a released
-# version.  Daily snapshots may contain new features and bugfixes. Or
-# they may not even compile at all....
-#USE_BUSYBOX_SNAPSHOT:=
-#USE_BUSYBOX_SNAPSHOT:=snapshot
-USE_BUSYBOX_SNAPSHOT:=20040509
-
-# Enable large file (files > 2 GB) support
+#USE_UCLIBC_SNAPSHOT:=$(SNAPSHOT)
+USE_UCLIBC_LDSO_0_9_24:=false
+#USE_BUSYBOX_SNAPSHOT:=$(SNAPSHOT)
+USE_NETFILTER_SNAPSHOT:=20041009
+USE_BRIDGE_VERSION:=1.0.4
 BUILD_WITH_LARGEFILE:=true
 
+OPTIMIZE_FOR_CPU=$(ARCH)
+
 # Command used to download source code
 WGET:=wget --passive-ftp
 
-# Optimize toolchain for which type of CPU?
-OPTIMIZE_FOR_CPU=$(ARCH)
-#OPTIMIZE_FOR_CPU=i686
-# Note... gcc 2.95 does not seem to like anything higher than i586.
-#OPTIMIZE_FOR_CPU=i586
-#OPTIMIZE_FOR_CPU=whatever
-
 # Soft floating point options.
 # Notes:
 #   Currently builds with gcc 3.3 for arm, mips, mipsel, powerpc.
@@ -106,8 +64,8 @@ TARGET_DEBUGGING= #-g
 
 # Currently the unwind stuff seems to work for staticly linked apps but
 # not dynamic.  So use setjmp/longjmp exceptions by default.
-GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions
-#GCC_USE_SJLJ_EXCEPTIONS:=
+# GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions
+GCC_USE_SJLJ_EXCEPTIONS:=
 
 # Any additional gcc options you may want to include....
 EXTRA_GCC_CONFIG_OPTIONS:=
@@ -137,85 +95,9 @@ INSTALL_LIBGCJ:=false
 # The list of stuff to build for the target filesystem
 #
 #############################################################
-TARGETS:=host-sed
-
-ifeq ($(GCC_2_95_TOOLCHAIN),true)
-TARGETS+=uclibc-configured binutils gcc2_95
-else
-TARGETS+=uclibc-configured binutils gcc3_3
-endif
-
-# Do you want user mode Linux (x86 only), or are you building a
-# your own kernel that will run on its own?  Perhaps you have a
-# kernel you have already configured and you want to use that?
-# The default is to just use a set of known working kernel
-# headers.  Unless you want to build a kernel, I recommend just
-# using that...
-#TARGETS+=kernel-headers
-#TARGETS+=linux
-#TARGETS+=user-mode-linux
-#TARGETS+=system-linux
-TARGETS+= openwrt-base
-
-# The default minimal set
-#TARGETS+=busybox tinylogin
-
-# Openssh...
-#TARGETS+=zlib openssl openssh
-# Dropbear sshd is much smaller than openssl + openssh
-#TARGETS+=dropbear_sshd
-
-# Everything needed to build a full uClibc development system!
-#TARGETS+=coreutils findutils bash make diffutils patch sed
-#TARGETS+=ed flex bison file gawk tar grep bzip2
-
-#If you want a development system, you probably want gcc built
-# with uClibc so it can run within your dev system...
-#TARGETS+=gcc2_95_target ccache_target   # NOT WORKING!!!
-#TARGETS+=gcc3_3_target ccache_target
-
-# Of course, if you are installing a development system, you
-# may want some header files so you can compile stuff....
-#TARGETS+=ncurses-headers zlib-headers openssl-headers
-
-# More development system stuff for those that want it
-#TARGETS+=m4 autoconf automake libtool
-
-# Perl
-#TARGETS+=perl
-
-# Some nice debugging tools
-#TARGETS+=gdb strace ltrace
+TARGETS:=host-sed openwrt-code.bin
 
-# The Valgrind debugger (x86 only)
-#TARGETS+=valgrind
-
-# Some stuff for access points and firewalls
-#TARGETS+=iptables hostap wtools dhcp_relay bridge
-#TARGETS+=iproute2 netsnmp
-
-# Run customize.mk at the very end to add your own special config.
-# This is useful for making your own distro within the buildroot
-# process.
-# TARGETS+=customize
-
-#############################################################
-#
-# Pick your root filesystem type.
-#
-#############################################################
-#TARGETS+=ext2root
-
-# Must mount cramfs with 'ramdisk_blocksize=4096'
-#TARGETS+=cramfsroot
-
-# You may need to edit make/jffs2root.mk to change target
-# endian-ness or similar, but this is sufficient for most
-# things as-is...
-#TARGETS+=jffs2root
-
-#TARGETS+= openwrt-linux.trx
-TARGETS+= openwrt-code.bin
+PACKAGES:=oidentd iproute2 kmod-sched wshaper zlib openssl openssh pppoecd dropbear chillispot dhcp-fwd ip6tables kmod-ipt6 kmod-ipv6 kmod-nfs kmod-ppp-async kmod-ppp-mppe-mppc ppp pppoecd pptp-server kmod-tun fprobe libpcap libpthread pptp-client vsftpd matrixssl ntpclient radvd strace
 
 #############################################################
 #
@@ -264,8 +146,8 @@ GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux
 KERNEL_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
 TARGET_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
 TARGET_CC=$(TARGET_CROSS)gcc
-STRIP=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note
-
+#STRIP=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note --strip-unneeded
+STRIP=$(STAGING_DIR)/bin/sstrip
 
 HOST_ARCH:=$(shell $(HOSTCC) -dumpmachine | sed -e s'/-.*//' \
 	-e 's/sparc.*/sparc/' \
@@ -296,14 +178,26 @@ else
 DISABLE_NLS:=--disable-nls
 endif
 
-
 all:   world
 
 TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
 TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
 TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
 
-world: $(DL_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS)
+
+PACKAGES_IPK:=$(patsubst %,%-ipk,$(PACKAGES))
+OPENWRT_IPK_DIR=$(SOURCE_DIR)/openwrt/ipkg
+
+world: $(DL_DIR) $(TARGETS_SOURCE) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS)
+	@echo "ALL DONE."
+
+packages: ipkg-utils $(PACKAGES_IPK)
+	-@mkdir -p $(BASE_DIR)/packages
+	{ \
+		cd $(BASE_DIR)/packages; \
+		mv $(BUILD_DIR)/*.ipk .; \
+		$(IPKG_MAKE_INDEX) . > Packages; \
+	}
 	@echo "ALL DONE."
 
 .PHONY: all world clean dirclean distclean source $(TARGETS) \
@@ -332,11 +226,9 @@ $(STAGING_DIR):
 	ln -fs ../$(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/usr/include
 
 
-$(TARGET_DIR): $(DL_DIR)/$(OPENWRT_ROOT_SKEL)
+$(TARGET_DIR):
 	rm -rf $(TARGET_DIR)
-	#zcat $(SOURCE_DIR)/skel.tar.gz | tar -C $(BUILD_DIR) -xf -
-	zcat $(DL_DIR)/$(OPENWRT_ROOT_SKEL) | tar -C $(BUILD_DIR) -xf -
-	#cp -a $(SOURCE_DIR)/target_skeleton/* $(TARGET_DIR)/
+	cp -a $(SOURCE_DIR)/openwrt/root/ $(TARGET_DIR)
 	-find $(TARGET_DIR) -type d -name CVS -exec rm -rf {} \; > /dev/null 2>&1
 
 source: $(TARGETS_SOURCE)
@@ -348,11 +240,13 @@ source: $(TARGETS_SOURCE)
 #############################################################
 clean:
 	rm -rf $(TOOL_BUILD_DIR) $(BUILD_DIR) $(IMAGE) \
+		$(BASE_DIR)/packages \
 		openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
 		openwrt-kmodules.tar.bz2
 
 dirclean: $(TARGETS_DIRCLEAN)
 	rm -rf $(TARGET_DIR) $(STAGING_DIR) $(IMAGE) \
+		$(BASE_DIR)/packages \
 		openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
 		openwrt-kmodules.tar.bz2