X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/4f3f9fa20381cbbda05497a1c0f94c1eecebfb3b..cb64c407c7199669817a0f13b0e95e406898d598:/package/mac80211/patches/800-b43-gpio-mask-module-option.patch

diff --git a/package/mac80211/patches/800-b43-gpio-mask-module-option.patch b/package/mac80211/patches/800-b43-gpio-mask-module-option.patch
index bef3b58c3..f3c278ee2 100644
--- a/package/mac80211/patches/800-b43-gpio-mask-module-option.patch
+++ b/package/mac80211/patches/800-b43-gpio-mask-module-option.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/b43/b43.h
 +++ b/drivers/net/wireless/b43/b43.h
-@@ -705,6 +705,7 @@ struct b43_wldev {
+@@ -803,6 +803,7 @@ struct b43_wldev {
  	bool qos_enabled;		/* TRUE, if QoS is used. */
  	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
  	bool use_pio;			/* TRUE if next init should use PIO */
@@ -10,7 +10,7 @@
  	struct b43_phy phy;
 --- a/drivers/net/wireless/b43/main.c
 +++ b/drivers/net/wireless/b43/main.c
-@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode15.fw");
+@@ -76,6 +76,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw");
  MODULE_FIRMWARE("b43/ucode5.fw");
  MODULE_FIRMWARE("b43/ucode9.fw");
  
@@ -22,29 +22,16 @@
  static int modparam_bad_frames_preempt;
  module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  MODULE_PARM_DESC(bad_frames_preempt,
-@@ -2534,10 +2539,10 @@ static int b43_gpio_init(struct b43_wlde
- 		    & ~B43_MACCTL_GPOUTSMSK);
+@@ -2674,10 +2679,10 @@ static int b43_gpio_init(struct b43_wlde
+ 	u32 mask, set;
  
- 	b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK)
--		    | 0x000F);
-+		    | modparam_gpiomask);
+ 	b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
+-	b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, 0xF);
++	b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, modparam_gpiomask);
  
  	mask = 0x0000001F;
 -	set = 0x0000000F;
 +	set = modparam_gpiomask;
- 	if (dev->dev->bus->chip_id == 0x4301) {
+ 	if (dev->dev->chip_id == 0x4301) {
  		mask |= 0x0060;
  		set |= 0x0060;
-@@ -5094,10 +5099,10 @@ static void b43_print_driverinfo(void)
- 	feat_sdio = "S";
- #endif
- 	printk(KERN_INFO "Broadcom 43xx driver loaded "
--	       "[ Features: %s%s%s%s%s, Firmware-ID: "
-+	       "[ Features: %s%s%s%s%s, GPIO LED Mask: 0x%04x, Firmware-ID: "
- 	       B43_SUPPORTED_FIRMWARE_ID " ]\n",
- 	       feat_pci, feat_pcmcia, feat_nphy,
--	       feat_leds, feat_sdio);
-+	       feat_leds, feat_sdio, modparam_gpiomask);
- }
- 
- static int __init b43_init(void)