X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/61a476da4d61774ee01624726fe1bee786f7cf8e..d46e7c8da5b9c38a12ad9451eb83d65517c7b39d:/target/linux/gemini/patches/001-git_sync.patch?ds=inline diff --git a/target/linux/gemini/patches/001-git_sync.patch b/target/linux/gemini/patches/001-git_sync.patch index 2087769be..d072a0195 100644 --- a/target/linux/gemini/patches/001-git_sync.patch +++ b/target/linux/gemini/patches/001-git_sync.patch @@ -8,7 +8,7 @@ /* * Debugging stuff -@@ -330,7 +331,7 @@ params: ldr r0, =params_phys +@@ -337,7 +338,7 @@ params: ldr r0, =params_phys * This routine must preserve: * r4, r5, r6, r7, r8 */ @@ -17,7 +17,7 @@ cache_on: mov r3, #8 @ cache_on function b call_cache_fn -@@ -499,7 +500,7 @@ __common_mmu_cache_on: +@@ -519,7 +520,7 @@ __common_mmu_cache_on: mcr p15, 0, r3, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c3, c0, 0 @ load domain access control b 1f @@ -26,17 +26,17 @@ 1: mcr p15, 0, r0, c1, c0, 0 @ load control register mrc p15, 0, r0, c1, c0, 0 @ and read it back to sub pc, lr, r0, lsr #32 @ properly flush pipeline -@@ -518,7 +519,7 @@ __common_mmu_cache_on: +@@ -538,7 +539,7 @@ __common_mmu_cache_on: * r8 = atags pointer - * r9-r14 = corrupted + * r9-r12,r14 = corrupted */ - .align 5 + .align L1_CACHE_SHIFT reloc_start: add r9, r5, r0 sub r9, r9, #128 @ do not copy the stack debug_reloc_start -@@ -722,7 +723,7 @@ proc_types: - * On exit, r0, r1, r2, r3, r12 corrupted +@@ -766,7 +767,7 @@ proc_types: + * On exit, r0, r1, r2, r3, r9, r12 corrupted * This routine must preserve: r4, r6, r7 */ - .align 5 @@ -44,7 +44,7 @@ cache_off: mov r3, #12 @ cache_off function b call_cache_fn -@@ -791,7 +792,7 @@ __armv3_mmu_cache_off: +@@ -841,7 +842,7 @@ __armv3_mmu_cache_off: * This routine must preserve: * r0, r4, r5, r6, r7 */ @@ -53,20 +53,6 @@ cache_clean_flush: mov r3, #16 b call_cache_fn ---- a/arch/arm/include/asm/cache.h -+++ b/arch/arm/include/asm/cache.h -@@ -4,7 +4,11 @@ - #ifndef __ASMARM_CACHE_H - #define __ASMARM_CACHE_H - -+#ifdef CONFIG_CPU_FA526 -+#define L1_CACHE_SHIFT 4 -+#else - #define L1_CACHE_SHIFT 5 -+#endif - #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - - /* --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -98,7 +98,7 @@ static inline int dma_set_mask(struct de @@ -80,7 +66,7 @@ static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -825,7 +825,7 @@ config ISA_DMA_API +@@ -923,7 +923,7 @@ config ISA_DMA_API bool config PCI @@ -91,16 +77,16 @@ bus system, i.e. the way the CPU talks to the other stuff inside --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S -@@ -21,6 +21,7 @@ - #include +@@ -22,6 +22,7 @@ #include #include + #include +#include #include "entry-header.S" -@@ -153,7 +154,7 @@ ENDPROC(__und_invalid) - stmia r5, {r0 - r4} +@@ -166,7 +167,7 @@ ENDPROC(__und_invalid) + asm_trace_hardirqs_off .endm - .align 5 @@ -108,7 +94,7 @@ __dabt_svc: svc_entry -@@ -202,7 +203,7 @@ __dabt_svc: +@@ -214,7 +215,7 @@ __dabt_svc: UNWIND(.fnend ) ENDPROC(__dabt_svc) @@ -117,7 +103,7 @@ __irq_svc: svc_entry -@@ -247,7 +248,7 @@ svc_preempt: +@@ -255,7 +256,7 @@ svc_preempt: b 1b #endif @@ -126,7 +112,7 @@ __und_svc: #ifdef CONFIG_KPROBES @ If a kprobe is about to simulate a "stmdb sp..." instruction, -@@ -286,7 +287,7 @@ __und_svc: +@@ -301,7 +302,7 @@ __und_svc: UNWIND(.fnend ) ENDPROC(__und_svc) @@ -135,7 +121,7 @@ __pabt_svc: svc_entry -@@ -329,7 +330,7 @@ __pabt_svc: +@@ -337,7 +338,7 @@ __pabt_svc: UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -144,7 +130,7 @@ .LCcralign: .word cr_alignment #ifdef MULTI_DABORT -@@ -400,7 +401,7 @@ ENDPROC(__pabt_svc) +@@ -412,7 +413,7 @@ ENDPROC(__pabt_svc) #endif .endm @@ -153,7 +139,7 @@ __dabt_usr: usr_entry kuser_cmpxchg_check -@@ -432,7 +433,7 @@ __dabt_usr: +@@ -444,7 +445,7 @@ __dabt_usr: UNWIND(.fnend ) ENDPROC(__dabt_usr) @@ -162,7 +148,7 @@ __irq_usr: usr_entry kuser_cmpxchg_check -@@ -465,7 +466,7 @@ ENDPROC(__irq_usr) +@@ -476,7 +477,7 @@ ENDPROC(__irq_usr) .ltorg @@ -171,7 +157,7 @@ __und_usr: usr_entry -@@ -668,7 +669,7 @@ __und_usr_unknown: +@@ -692,7 +693,7 @@ __und_usr_unknown: b do_undefinstr ENDPROC(__und_usr_unknown) @@ -180,7 +166,7 @@ __pabt_usr: usr_entry -@@ -778,7 +779,7 @@ ENDPROC(__switch_to) +@@ -803,7 +804,7 @@ ENDPROC(__switch_to) #endif .endm @@ -189,7 +175,7 @@ .globl __kuser_helper_start __kuser_helper_start: -@@ -818,7 +819,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 +@@ -843,7 +844,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 smp_dmb usr_ret lr @@ -198,7 +184,7 @@ /* * Reference prototype: -@@ -950,7 +951,7 @@ kuser_cmpxchg_fixup: +@@ -975,7 +976,7 @@ kuser_cmpxchg_fixup: #endif @@ -207,7 +193,7 @@ /* * Reference prototype: -@@ -1032,7 +1033,7 @@ __kuser_helper_end: +@@ -1058,7 +1059,7 @@ __kuser_helper_end: * of which is copied into r0 for the mode specific abort handler. */ .macro vector_stub, name, mode, correction=0 @@ -216,7 +202,7 @@ vector_\name: .if \correction -@@ -1157,7 +1158,7 @@ __stubs_start: +@@ -1189,7 +1190,7 @@ __stubs_start: .long __und_invalid @ e .long __und_invalid @ f @@ -225,7 +211,7 @@ /*============================================================================= * Undefined FIQs -@@ -1187,7 +1188,7 @@ vector_addrexcptn: +@@ -1219,7 +1220,7 @@ vector_addrexcptn: * We group all the following data together to optimise * for CPUs with separate I & D caches. */ @@ -252,7 +238,7 @@ /* * This is the fast syscall return path. We do as little as * possible here, and this includes saving r0 back into the SVC -@@ -178,7 +179,7 @@ ftrace_stub: +@@ -183,7 +184,7 @@ ftrace_stub: #define A710(code...) #endif @@ -261,7 +247,7 @@ ENTRY(vector_swi) sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 -@@ -306,7 +307,7 @@ __sys_trace_return: +@@ -316,7 +317,7 @@ __sys_trace_return: bl syscall_trace b ret_slow_syscall @@ -280,7 +266,7 @@ #if (PHYS_OFFSET & 0x001fffff) #error "PHYS_OFFSET must be at an even 2MiB boundary!" -@@ -187,7 +188,7 @@ ENDPROC(__enable_mmu) +@@ -192,7 +193,7 @@ ENDPROC(__enable_mmu) * * other registers depend on the function called upon completion */ @@ -291,15 +277,15 @@ mcr p15, 0, r0, c1, c0, 0 @ write control reg --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S -@@ -6,6 +6,7 @@ - #include +@@ -7,6 +7,7 @@ #include #include + #include +#include OUTPUT_ARCH(arm) ENTRY(stext) -@@ -58,7 +59,7 @@ SECTIONS +@@ -59,7 +60,7 @@ SECTIONS *(.security_initcall.init) __security_initcall_end = .; #ifdef CONFIG_BLK_DEV_INITRD @@ -308,7 +294,7 @@ __initramfs_start = .; usr/built-in.o(.init.ramfs) __initramfs_end = .; -@@ -153,13 +154,13 @@ SECTIONS +@@ -176,13 +177,13 @@ SECTIONS /* * then the cacheline aligned data */ @@ -324,22 +310,6 @@ __start___ex_table = .; #ifdef CONFIG_MMU *(__ex_table) ---- a/arch/arm/lib/copy_page.S -+++ b/arch/arm/lib/copy_page.S -@@ -12,11 +12,12 @@ - #include - #include - #include -+#include - - #define COPY_COUNT (PAGE_SZ/64 PLD( -1 )) - - .text -- .align 5 -+ .align L1_CACHE_SHIFT - /* - * StrongARM optimised copy_page routine - * now 1.78bytes/cycle, was 1.60 bytes/cycle (50MHz bus -> 89MB/s) --- a/arch/arm/lib/memchr.S +++ b/arch/arm/lib/memchr.S @@ -11,9 +11,10 @@ @@ -4129,7 +4099,7 @@ +gemini_negmac-objs := gm_gmac.o --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig -@@ -2087,6 +2087,13 @@ config ACENIC_OMIT_TIGON_I +@@ -2126,6 +2126,13 @@ config ACENIC_OMIT_TIGON_I The safe and default value for this is N. @@ -4145,7 +4115,7 @@ depends on PCI --- a/drivers/net/Makefile +++ b/drivers/net/Makefile -@@ -234,6 +234,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p +@@ -247,6 +247,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p obj-$(CONFIG_MLX4_CORE) += mlx4/ obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_ETHOC) += ethoc.o @@ -4617,7 +4587,7 @@ +}; --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h -@@ -543,7 +543,12 @@ static inline unsigned int +@@ -552,7 +552,12 @@ static inline unsigned int ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) { if (ehci_is_TDI(ehci)) { @@ -4625,14 +4595,14 @@ + portsc = readl(ehci_to_hcd(ehci)->regs + 0x80); + switch ((portsc>>22)&3) { +#else - switch ((portsc>>26)&3) { + switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) { +#endif case 0: return 0; case 1: --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c -@@ -192,9 +192,11 @@ static int ehci_halt (struct ehci_hcd *e +@@ -194,9 +194,11 @@ static int ehci_halt (struct ehci_hcd *e if ((temp & STS_HALT) != 0) return 0; @@ -4644,7 +4614,7 @@ return handshake (ehci, &ehci->regs->status, STS_HALT, STS_HALT, 16 * 125); } -@@ -250,8 +252,8 @@ static int ehci_reset (struct ehci_hcd * +@@ -263,8 +265,8 @@ static int ehci_reset (struct ehci_hcd * if (retval) return retval; @@ -4653,9 +4623,9 @@ +// if (ehci_is_TDI(ehci)) +// tdi_reset (ehci); - return retval; - } -@@ -381,12 +383,13 @@ static void ehci_silence_controller(stru + if (ehci->debug) + dbgp_external_startup(); +@@ -397,12 +399,13 @@ static void ehci_silence_controller(stru { ehci_halt(ehci); ehci_turn_off_all_ports(ehci); @@ -4670,7 +4640,7 @@ } /* ehci_shutdown kick in for silicon on any bus (not just pci, etc). -@@ -631,7 +634,9 @@ static int ehci_run (struct usb_hcd *hcd +@@ -654,7 +657,9 @@ static int ehci_run (struct usb_hcd *hcd // Philips, Intel, and maybe others need CMD_RUN before the // root hub will detect new devices (why?); NEC doesn't ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); @@ -4680,7 +4650,7 @@ ehci_writel(ehci, ehci->command, &ehci->regs->command); dbg_cmd (ehci, "init", ehci->command); -@@ -651,9 +656,11 @@ static int ehci_run (struct usb_hcd *hcd +@@ -674,9 +679,11 @@ static int ehci_run (struct usb_hcd *hcd */ down_write(&ehci_cf_port_reset_rwsem); hcd->state = HC_STATE_RUNNING; @@ -4690,9 +4660,9 @@ msleep(5); +#endif up_write(&ehci_cf_port_reset_rwsem); + ehci->last_periodic_enable = ktime_get_real(); - temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); -@@ -744,9 +751,10 @@ static irqreturn_t ehci_irq (struct usb_ +@@ -768,9 +775,10 @@ static irqreturn_t ehci_irq (struct usb_ pcd_status = status; /* resume root hub? */ @@ -4704,7 +4674,7 @@ while (i--) { int pstatus = ehci_readl(ehci, &ehci->regs->port_status [i]); -@@ -778,7 +786,9 @@ static irqreturn_t ehci_irq (struct usb_ +@@ -803,7 +811,9 @@ static irqreturn_t ehci_irq (struct usb_ ehci_halt(ehci); dead: ehci_reset(ehci); @@ -4714,7 +4684,7 @@ /* generic layer kills/unlinks all urbs, then * uses ehci_stop to clean up the rest */ -@@ -1045,6 +1055,11 @@ MODULE_LICENSE ("GPL"); +@@ -1102,6 +1112,11 @@ MODULE_LICENSE ("GPL"); #define PCI_DRIVER ehci_pci_driver #endif @@ -4728,7 +4698,7 @@ #define PLATFORM_DRIVER ehci_fsl_driver --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c -@@ -749,6 +749,12 @@ static int ehci_hub_control ( +@@ -809,6 +809,12 @@ static int ehci_hub_control ( /* see what we found out */ temp = check_reset_complete (ehci, wIndex, status_reg, ehci_readl(ehci, status_reg)); @@ -4743,10 +4713,10 @@ if (!(temp & (PORT_RESUME|PORT_RESET))) --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig -@@ -57,6 +57,7 @@ config USB_ARCH_HAS_EHCI - default y if PPC_83xx - default y if SOC_AU1200 +@@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_IXP4XX + default y if ARCH_W90X900 + default y if ARCH_AT91SAM9G45 + default y if ARCH_GEMINI default PCI @@ -5124,7 +5094,7 @@ +MODULE_ALIAS("platform:gemini-wdt"); --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -104,6 +104,16 @@ config 977_WATCHDOG +@@ -111,6 +111,16 @@ config 977_WATCHDOG Not sure? It's safe to say N. @@ -5143,8 +5113,8 @@ depends on ARCH_IXP2000 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91 - obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o +@@ -31,6 +31,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt. + obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o obj-$(CONFIG_21285_WATCHDOG) += wdt285.o obj-$(CONFIG_977_WATCHDOG) += wdt977.o +obj-$(CONFIG_GEMINI_WATCHDOG) += gemini_wdt.o @@ -5165,3 +5135,23 @@ /* CONFIGFLAG: offset 0x40 */ u32 configured_flag; #define FLAG_CF (1<<0) /* true: we'll support "high speed" */ +--- a/arch/arm/mm/Kconfig ++++ b/arch/arm/mm/Kconfig +@@ -774,5 +774,6 @@ config CACHE_XSC3L2 + + config ARM_L1_CACHE_SHIFT + int ++ default 4 if CPU_FA526 + default 6 if ARCH_OMAP3 + default 5 +--- a/arch/arm/lib/copy_page.S ++++ b/arch/arm/lib/copy_page.S +@@ -17,7 +17,7 @@ + #define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 )) + + .text +- .align 5 ++ .align L1_CACHE_SHIFT + /* + * StrongARM optimised copy_page routine + * now 1.78bytes/cycle, was 1.60 bytes/cycle (50MHz bus -> 89MB/s)