X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/632f858731d8741a93c77daf1aceed2fd45e193d..c18e77fd345fcede79e68a58e3d0f99ded084338:/package/busybox/config/networking/Config.in diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in index da28e30c9..481567c61 100644 --- a/package/busybox/config/networking/Config.in +++ b/package/busybox/config/networking/Config.in @@ -5,6 +5,39 @@ menu "Networking Utilities" +config BUSYBOX_CONFIG_NC + bool "nc" + default y + help + A simple Unix utility which reads and writes data across network + connections. + +config BUSYBOX_CONFIG_NC_SERVER + bool "Netcat server options (-l)" + default n + depends on BUSYBOX_CONFIG_NC + help + Allow netcat to act as a server. + +config BUSYBOX_CONFIG_NC_EXTRA + bool "Netcat extensions (-eiw and filename)" + default n + depends on BUSYBOX_CONFIG_NC + help + Add -e (support for executing the rest of the command line after + making or receiving a successful connection), -i (delay interval for + lines sent), -w (timeout for initial connection). + +config BUSYBOX_CONFIG_NC_110_COMPAT + bool "Netcat 1.10 compatibility (+2.5k)" + default n + depends on BUSYBOX_CONFIG_NC + help + This option makes nc closely follow original nc-1.10. + The code is about 2.5k bigger. It enables + -s ADDR, -n, -u, -v, -o FILE, -z options, but loses + busybox-specific extensions: -f FILE and -ll. + config BUSYBOX_CONFIG_FEATURE_IPV6 bool "Enable IPv6 support" default y @@ -12,11 +45,77 @@ config BUSYBOX_CONFIG_FEATURE_IPV6 Enable IPv6 support in busybox. This adds IPv6 support in the networking applets. +config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL + bool "Enable Unix domain socket support (usually not needed)" + default n + help + Enable Unix domain socket support in all busybox networking + applets. Address of the form local:/path/to/unix/socket + will be recognized. + + This extension is almost never used in real world usage. + You most likely want to say N. + +config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS + bool "Prefer IPv4 addresses from DNS queries" + default y + depends on BUSYBOX_CONFIG_FEATURE_IPV6 + help + Use IPv4 address of network host if it has one. + + If this option is off, the first returned address will be used. + This may cause problems when your DNS server is IPv6-capable and + is returning IPv6 host addresses too. If IPv6 address + precedes IPv4 one in DNS reply, busybox network applets + (e.g. wget) will use IPv6 address. On an IPv6-incapable host + or network applets will fail to connect to the host + using IPv6 address. + +config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS + bool "Verbose resolution errors" + default y + help + Enable if you are not satisfied with simplistic + "can't resolve 'hostname.com'" and want to know more. + This may increase size of your executable a bit. + +config BUSYBOX_CONFIG_ARP + bool "arp" + default n + help + Manipulate the system ARP cache. + config BUSYBOX_CONFIG_ARPING bool "arping" default y help - Ping hosts by ARP packets + Ping hosts by ARP packets. + +config BUSYBOX_CONFIG_BRCTL + bool "brctl" + default y + help + Manage ethernet bridges. + Supports addbr/delbr and addif/delif. + +config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY + bool "Fancy options" + default y + depends on BUSYBOX_CONFIG_BRCTL + help + Add support for extended option like: + setageing, setfd, sethello, setmaxage, + setpathcost, setportprio, setbridgeprio, + stp + This adds about 600 bytes. + +config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW + bool "Support show" + default y + depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY + help + Add support for option which prints the current config: + show config BUSYBOX_CONFIG_DNSD bool "dnsd" @@ -38,6 +137,30 @@ config BUSYBOX_CONFIG_FAKEIDENTD fakeidentd listens on the ident port and returns a predefined fake value on any query. +config BUSYBOX_CONFIG_FTPD + bool "ftpd" + default n + help + simple FTP daemon. You have to run it via inetd. + +config BUSYBOX_CONFIG_FEATURE_FTP_WRITE + bool "Enable upload commands" + default n + depends on BUSYBOX_CONFIG_FTPD + help + Enable all kinds of FTP upload commands (-w option) + +config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST + bool "Enable workaround for RFC-violating clients" + default n + depends on BUSYBOX_CONFIG_FTPD + help + Some ftp clients (among them KDE's Konqueror) issue illegal + "LIST -l" requests. This option works around such problems. + It might prevent you from listing files starting with "-" and + it increases the code size by ~40 bytes. + Most other ftp servers seem to behave similar to this. + config BUSYBOX_CONFIG_FTPGET bool "ftpget" default n @@ -53,7 +176,7 @@ config BUSYBOX_CONFIG_FTPPUT config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS bool "Enable long options in ftpget/ftpput" default n - depends on BUSYBOX_CONFIG_GETOPT_LONG && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) + depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) help Support long options for the ftpget/ftpput applet. @@ -61,26 +184,35 @@ config BUSYBOX_CONFIG_HOSTNAME bool "hostname" default n help - Show or set the system's host name + Show or set the system's host name. config BUSYBOX_CONFIG_HTTPD bool "httpd" - default y + default n help Serve web pages via an HTTP server. -config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP - bool "Support reloading the global config file using hup signal" +config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES + bool "Support 'Ranges:' header" default n - depends on BUSYBOX_CONFIG_HTTPD && BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD + depends on BUSYBOX_CONFIG_HTTPD help - This option enables processing of SIGHUP to reload cached - configuration settings. + Makes httpd emit "Accept-Ranges: bytes" header and understand + "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted + downloads, seeking in multimedia players etc. + +config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE + bool "Use sendfile system call" + default n + depends on BUSYBOX_CONFIG_HTTPD + help + When enabled, httpd will use the kernel sendfile() function + instead of read/write loop. config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID - bool "Enable support -u option" + bool "Enable -u option" default n - depends on BUSYBOX_CONFIG_HTTPD && BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD + depends on BUSYBOX_CONFIG_HTTPD help This option allows the server to run as a specific user rather than defaulting to the user that starts the server. @@ -89,7 +221,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH bool "Enable Basic http Authentication" - default y + default n depends on BUSYBOX_CONFIG_HTTPD help Utilizes password settings from /etc/httpd.conf for basic @@ -97,57 +229,74 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 bool "Support MD5 crypted passwords for http Authentication" - default y + default n depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH help Enables basic per URL authentication from /etc/httpd.conf using md5 passwords. -config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES - bool "Support loading additional MIME types at run-time" - default y - depends on BUSYBOX_CONFIG_HTTPD - help - This option enables support for additional MIME types at - run-time to be specified in the configuration file. - config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI bool "Support Common Gateway Interface (CGI)" - default y + default n depends on BUSYBOX_CONFIG_HTTPD help This option allows scripts and executables to be invoked when specific URLs are requested. config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool "Enable support for running scripts through an interpreter" + bool "Support for running scripts through an interpreter" default n depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help This option enables support for running scripts through an interpreter. Turn this on if you want PHP scripts to work - properly. You need to supply an addition line in your httpd + properly. You need to supply an additional line in your httpd config file: *.php:/path/to/your/php config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV - bool "Support the REMOTE_PORT environment variable for CGI" - default y + bool "Set REMOTE_PORT environment variable for CGI" + default n depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help Use of this option can assist scripts in generating references that contain a unique port number. config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR - bool "Enable the -e option for shell script CGI simplification." - default y + bool "Enable -e option (useful for CGIs written as shell scripts)" + default n depends on BUSYBOX_CONFIG_HTTPD help - This option allows html encoding arbitrary - strings for display of the browser. Output goes to stdout. - For example, httpd -e "" as + This option allows html encoding of arbitrary strings for display + by the browser. Output goes to stdout. + For example, httpd -e "" produces "<Hello World>". +config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES + bool "Support for custom error pages" + default n + depends on BUSYBOX_CONFIG_HTTPD + help + This option allows you to define custom error pages in + the configuration file instead of the default HTTP status + error pages. For instance, if you add the line: + E404:/path/e404.html + in the config file, the server will respond the specified + '/path/e404.html' file instead of the terse '404 NOT FOUND' + message. + +config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY + bool "Support for reverse proxy" + default n + depends on BUSYBOX_CONFIG_HTTPD + help + This option allows you to define URLs that will be forwarded + to another HTTP server. To setup add the following line to the + configuration file + P:/url/:http://hostname[:port]/new/path/ + Then a request to /url/myfile will be forwarded to + http://hostname[:port]/new/path/myfile. + config BUSYBOX_CONFIG_IFCONFIG bool "ifconfig" default y @@ -167,7 +316,7 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP default n depends on BUSYBOX_CONFIG_IFCONFIG help - Allow "keepalive" and "outfill" support for SLIP. If you're not + Allow "keepalive" and "outfill" support for SLIP. If you're not planning on using serial lines, leave this unchecked. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ @@ -184,7 +333,7 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW depends on BUSYBOX_CONFIG_IFCONFIG help Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' + supports this operation. Currently, we only support the 'ether' class. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS @@ -195,22 +344,45 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS Setting this will make ifconfig attempt to find the broadcast automatically if the value '+' is used. +config BUSYBOX_CONFIG_IFENSLAVE + bool "ifenslave" + default n + help + Userspace application to bind several interfaces + to a logical interface (use with kernel bonding driver). + +config BUSYBOX_CONFIG_IFPLUGD + bool "ifplugd" + default n + help + Network interface plug detection daemon. + config BUSYBOX_CONFIG_IFUPDOWN bool "ifupdown" default n - select BUSYBOX_CONFIG_RUN_PARTS help - Activate or deactivate the specified interfaces. This applet makes + Activate or deactivate the specified interfaces. This applet makes use of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want + configure network interfaces. Therefore, you will probably also want to enable either IFCONFIG and ROUTE, or enable - FEATURE_IFUPDOWN_IP and the various IP options. Of + FEATURE_IFUPDOWN_IP and the various IP options. Of course you could use non-busybox versions of these programs, so against my better judgement (since this will surely result in plenty of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either - "ifconfig" and "route" or the "ip" command, either via busybox or via - standalone utilities. + enable these additional options. It is up to you to supply either + "ifconfig", "route" and "run-parts" or the "ip" command, either + via busybox or via standalone utilities. + +config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH + string "Absolute path to ifstate file" + default n + depends on BUSYBOX_CONFIG_IFUPDOWN + help + ifupdown keeps state information in a file called ifstate. + Typically it is located in /var/run/ifstate, however + some distributions tend to put it in other places + (debian, for example, uses /etc/network/run/ifstate). + This config option defines location of ifstate. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP bool "Use ip applet" @@ -249,26 +421,27 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN work. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 - bool "Enable support for IPv4" + bool "Support for IPv4" default n depends on BUSYBOX_CONFIG_IFUPDOWN help - If you want busybox to talk IPv4, leave this on. + If you want ifup/ifdown to talk IPv4, leave this on. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 - bool "Enable support for IPv6" + bool "Support for IPv6" default n depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6 help If you need support for IPv6, turn this option on. -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX - bool "Enable support for IPX" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - If this option is selected you can use busybox to work with IPX - networks. +### UNUSED +###config FEATURE_IFUPDOWN_IPX +### bool "Support for IPX" +### default y +### depends on IFUPDOWN +### help +### If this option is selected you can use busybox to work with IPX +### networks. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING bool "Enable mapping support" @@ -278,6 +451,16 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING This enables support for the "mapping" stanza, unless you have a weird network setup you don't need it. +config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP + bool "Support for external dhcp clients" + default n + depends on BUSYBOX_CONFIG_IFUPDOWN + help + This enables support for the external dhcp clients. Clients are + tried in the following order: dhcpcd, dhclient, pump and udhcpc. + Otherwise, if udhcpc applet is enabled, it is used. + Otherwise, ifup/ifdown will have no support for DHCP. + config BUSYBOX_CONFIG_INETD bool "inetd" default n @@ -324,7 +507,7 @@ config BUSYBOX_CONFIG_FEATURE_INETD_RPC bool "Support RPC services" default n depends on BUSYBOX_CONFIG_INETD - depends on BUSYBOX_CONFIG_FEATURE_HAVE_RPC + select BUSYBOX_CONFIG_FEATURE_HAVE_RPC help Support Sun-RPC based services @@ -333,7 +516,7 @@ config BUSYBOX_CONFIG_IP default n help The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with + utility. You generally don't need "ip" to use busybox with TCP/IP. config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS @@ -372,7 +555,7 @@ config BUSYBOX_CONFIG_FEATURE_IP_RULE Add support for rule commands to "ip". config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS - bool "Support short forms of ip commands." + bool "Support short forms of ip commands" default n depends on BUSYBOX_CONFIG_IP help @@ -381,10 +564,21 @@ config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS ip link -> iplink ip route -> iproute ip tunnel -> iptunnel + ip rule -> iprule Say N unless you desparately need the short form of the ip object commands. +config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS + bool "Support displaying rarely used link types" + default n + depends on BUSYBOX_CONFIG_IP + help + If you are not going to use links of type "frad", "econet", + "bif" etc, you probably don't need to enable this. + Ethernet, wireless, infrared, ppp/slip, ip tunnelling + link types are supported without this option selected. + config BUSYBOX_CONFIG_IPADDR bool default n @@ -422,12 +616,13 @@ config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY default n depends on BUSYBOX_CONFIG_IPCALC help - Adds the options hostname, prefix and silent to the output of "ipcalc". + Adds the options hostname, prefix and silent to the output of + "ipcalc". config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS bool "Enable long options" default n - depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_GETOPT_LONG + depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS help Support long options for the ipcalc applet. @@ -440,46 +635,52 @@ config BUSYBOX_CONFIG_NAMEIF Renamed interfaces MUST be in the down state. It is possible to use a file (default: /etc/mactab) with list of new interface names and MACs. - Maximum interface name length: IF_NAMESIZE = 16 + Maximum interface name length: IFNAMSIZ = 16 File fields are separated by space or tab. File format: # Comment new_interface_name XX:XX:XX:XX:XX:XX -config BUSYBOX_CONFIG_NC - bool "nc" - default y +config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED + bool "Extended nameif" + default n + depends on BUSYBOX_CONFIG_NAMEIF help - A simple Unix utility which reads and writes data across network - connections. - + This extends the nameif syntax to support the bus_info and driver + checks. The syntax is compatible to the normal nameif. + File format: + new_interface_name driver=asix bus=usb-0000:00:08.2-3 + new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 + new_interface_name mac=00:80:C8:38:91:B5 + new_interface_name 00:80:C8:38:91:B5 + config BUSYBOX_CONFIG_NETMSG bool "netmsg" default y help simple program for sending udp broadcast messages -config BUSYBOX_CONFIG_NC_SERVER - bool "Netcat server options (-lp)" - default n - depends on BUSYBOX_CONFIG_NC +config BUSYBOX_CONFIG_NETSTAT + bool "netstat" + default y help - Allow netcat to act as a server. + netstat prints information about the Linux networking subsystem. -config BUSYBOX_CONFIG_NC_EXTRA - bool "Netcat extensions (-eiw and filename)" - default n - depends on BUSYBOX_CONFIG_NC +config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE + bool "Enable wide netstat output" + default y + depends on BUSYBOX_CONFIG_NETSTAT help - Add -e (support for executing the rest of the command line after - making or receiving a successful connection), -i (delay interval for - lines sent), -w (timeout for initial connection). + Add support for wide columns. Useful when displaying IPv6 addresses + (-W option). -config BUSYBOX_CONFIG_NETSTAT - bool "netstat" +config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG + bool "Enable PID/Program name output" default y + depends on BUSYBOX_CONFIG_NETSTAT help - netstat prints information about the Linux networking subsystem. + Add support for -p flag to print out PID and program name. + +700 bytes of code. config BUSYBOX_CONFIG_NSLOOKUP bool "nslookup" @@ -487,6 +688,20 @@ config BUSYBOX_CONFIG_NSLOOKUP help nslookup is a tool to query Internet name servers. +config BUSYBOX_CONFIG_NTPD + bool "ntpd" + default n + help + The NTP client/server daemon. + +config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER + bool "Make ntpd usable as a NTP server" + default n + depends on BUSYBOX_CONFIG_NTPD + help + Make ntpd usable as a NTP server. If you disable this option + ntpd will be usable only as a NTP client. + config BUSYBOX_CONFIG_PING bool "ping" default y @@ -494,35 +709,57 @@ config BUSYBOX_CONFIG_PING ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. -config BUSYBOX_CONFIG_FEATURE_FANCY_PING - bool "Enable fancy ping output" - default y - depends on BUSYBOX_CONFIG_PING - help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. - config BUSYBOX_CONFIG_PING6 bool "ping6" default y - depends on BUSYBOX_CONFIG_FEATURE_IPV6 + depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING help This will give you a ping that can talk IPv6. -config BUSYBOX_CONFIG_FEATURE_FANCY_PING6 - bool "Enable fancy ping6 output" +config BUSYBOX_CONFIG_FEATURE_FANCY_PING + bool "Enable fancy ping output" default y - depends on BUSYBOX_CONFIG_PING6 + depends on BUSYBOX_CONFIG_PING help - Make the output from the ping6 applet include statistics, and at the + Make the output from the ping applet include statistics, and at the same time provide full support for ICMP packets. +config BUSYBOX_CONFIG_PSCAN + bool "pscan" + default n + help + Simple network port scanner. + config BUSYBOX_CONFIG_ROUTE bool "route" default y help Route displays or manipulates the kernel's IP routing tables. +config BUSYBOX_CONFIG_SLATTACH + bool "slattach" + default n + help + slattach is a small utility to attach network interfaces to serial + lines. + +#config TC +# bool "tc" +# default y +# help +# show / manipulate traffic control settings +# +#config FEATURE_TC_INGRESS +# def_bool n +# depends on TC + +config BUSYBOX_CONFIG_TCPSVD + bool "tcpsvd" + default n + help + tcpsvd listens on a TCP port and runs a program for each new + connection. + config BUSYBOX_CONFIG_TELNET bool "telnet" default y @@ -536,7 +773,7 @@ config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE depends on BUSYBOX_CONFIG_TELNET help Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that + remote host you are connecting to. This is useful to make sure that things like ANSI colors and other control sequences behave. config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN @@ -555,9 +792,9 @@ config BUSYBOX_CONFIG_TELNETD select BUSYBOX_CONFIG_FEATURE_SYSLOG help A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a + running the daemon. Please keep in mind that the TELNET protocol + sends passwords in plain text. If you can't afford the space for an + SSH daemon and you trust your network, you may say 'y' here. As a more secure alternative, you should seriously consider installing the very small Dropbear SSH daemon instead: http://matt.ucc.asn.au/dropbear/dropbear.html @@ -583,7 +820,7 @@ config BUSYBOX_CONFIG_TELNETD mount -t devpts devpts /dev/pts You need to be sure that Busybox has LOGIN and - FEATURE_SUID enabled. And finally, you should make + FEATURE_SUID enabled. And finally, you should make certain that Busybox has been installed setuid root: chown root.root /bin/busybox @@ -599,58 +836,111 @@ config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE help Selecting this will make telnetd able to run standalone. +config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT + bool "Support -w SEC option (inetd wait mode)" + default n + depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE + help + This option allows you to run telnetd in "inet wait" mode. + Example inetd.conf line (note "wait", not usual "nowait"): + + telnet stream tcp wait root /bin/telnetd telnetd -w10 + + In this example, inetd passes _listening_ socket_ as fd 0 + to telnetd when connection appears. + telnetd will wait for connections until all existing + connections are closed, and no new connections + appear during 10 seconds. Then it exits, and inetd continues + to listen for new connections. + + This option is rarely used. "tcp nowait" is much more usual + way of running tcp services, including telnetd. + You most probably want to say N here. + config BUSYBOX_CONFIG_TFTP bool "tftp" default n help - This enables the Trivial File Transfer Protocol client program. TFTP + This enables the Trivial File Transfer Protocol client program. TFTP is usually used for simple, small transfers such as a root image for a network-enabled bootloader. +config BUSYBOX_CONFIG_TFTPD + bool "tftpd" + default n + help + This enables the Trivial File Transfer Protocol server program. + It expects that stdin is a datagram socket and a packet + is already pending on it. It will exit after one transfer. + In other words: it should be run from inetd in nowait mode, + or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" + +comment "Common options for tftp/tftpd" + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD + config BUSYBOX_CONFIG_FEATURE_TFTP_GET - bool "Enable \"get\" command" + bool "Enable 'tftp get' and/or tftpd upload code" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the GET command within the TFTP client. This allows + Add support for the GET command within the TFTP client. This allows a client to retrieve a file from a TFTP server. + Also enable upload support in tftpd, if tftpd is selected. + + Note: this option does _not_ make tftpd capable of download + (the usual operation people need from it)! config BUSYBOX_CONFIG_FEATURE_TFTP_PUT - bool "Enable \"put\" command" + bool "Enable 'tftp put' and/or tftpd download code" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the PUT command within the TFTP client. This allows + Add support for the PUT command within the TFTP client. This allows a client to transfer a file to a TFTP server. + Also enable download support in tftpd, if tftpd is selected. config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - bool "Enable \"blocksize\" command" + bool "Enable 'blksize' and 'tsize' protocol options" + default n + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD + help + Allow tftp to specify block size, and tftpd to understand + "blksize" and "tsize" options. + +config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR + bool "Enable tftp progress meter" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE help - Allow the client to specify the desired block size for transfers. + Show progress bar. -config BUSYBOX_CONFIG_DEBUG_TFTP +config BUSYBOX_CONFIG_TFTP_DEBUG bool "Enable debug" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Enable debug settings for tftp. This is useful if you're running - into problems with tftp as the protocol doesn't help you much when - you run into problems. + Make tftp[d] print debugging messages on stderr. + This is useful if you are diagnosing a bug in tftp[d]. config BUSYBOX_CONFIG_TRACEROUTE bool "traceroute" default y help - Utility to trace the route of IP packets + Utility to trace the route of IP packets. + +config BUSYBOX_CONFIG_TRACEROUTE6 + bool "traceroute6" + default n + depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE + help + Utility to trace the route of IPv6 packets. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE bool "Enable verbose output" default y depends on BUSYBOX_CONFIG_TRACEROUTE help - Add some verbosity to traceroute. This includes amongst other things + Add some verbosity to traceroute. This includes among other things hostnames and ICMP response types. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE @@ -666,10 +956,40 @@ config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP default n depends on BUSYBOX_CONFIG_TRACEROUTE help - Add feature to allow for ICMP ECHO instead of UDP datagrams. + Add option -I to use ICMP ECHO instead of UDP datagrams. + +config BUSYBOX_CONFIG_TUNCTL + bool "tunctl" + default n + help + tunctl creates or deletes tun devices. + +config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG + bool "Support owner:group assignment" + default n + depends on BUSYBOX_CONFIG_TUNCTL + help + Allow to specify owner and group of newly created interface. + 340 bytes of pure bloat. Say no here. source package/busybox/config/networking/udhcp/Config.in +config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS + string "ifup udhcpc command line options" + default "-R -n" + depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC + help + Command line options to pass to udhcpc from ifup. + Intended to alter options not available in /etc/network/interfaces. + (IE: --syslog --background etc...) + +config BUSYBOX_CONFIG_UDPSVD + bool "udpsvd" + default n + help + udpsvd listens on an UDP port and runs a program for each new + connection. + config BUSYBOX_CONFIG_VCONFIG bool "vconfig" default y @@ -697,17 +1017,10 @@ config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION help Support authenticated HTTP transfers. -config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL - bool "Enable IPv6 literal addresses" - default y - depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_FEATURE_IPV6 - help - Support IPv6 address literal notation in URLs. - config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS bool "Enable long options" default y - depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_GETOPT_LONG + depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS help Support long options for the wget applet.