X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/6638b8471f1d867c7e027301cd0bac58e5c951b3..a3945d7bcf1256fedc4b9013952ec15ab242da97:/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h index d185ce531..91adc5bae 100644 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h @@ -1,40 +1,29 @@ /* - * $Id$ - * * ADM5120 ethernet switch definitions * * This header file defines the hardware registers of the ADM5120 SoC * built-in Ethernet switch. * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. + * Copyright (C) 2007-2008 Gabor Juhos * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. */ -#ifndef _ADM5120_SWITCH_H_ -#define _ADM5120_SWITCH_H_ +#ifndef _MACH_ADM5120_SWITCH_H +#define _MACH_ADM5120_SWITCH_H -#define BIT(at) (1 << (at)) -#define BITMASK(len) ((1 << (len))-1) +#ifndef BIT +# define BIT(at) (1 << (at)) +#endif +#define BITMASK(len) (BIT(len)-1) #define SW_READ_REG(r) __raw_readl( \ - (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r) + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) #define SW_WRITE_REG(r, v) __raw_writel((v), \ - (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r) + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) /* Switch register offsets */ #define SWITCH_REG_CODE 0x0000 @@ -164,12 +153,12 @@ #define MAC_WT0_MWD_SHIFT 1 #define MAC_WT0_MWD BIT(1) /* MAC write done */ #define MAC_WT0_WFB BIT(2) /* Write Filter Bit */ -#define MAC_WT0_WVN_SHIFT 3 +#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */ #define MAC_WT0_WVE BIT(6) /* Write VLAN enable */ #define MAC_WT0_WPMN_SHIFT 7 #define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */ #define MAC_WT0_WAF_EMPTY 0 -#define MAC_WT0_WAF_STATIC 7 +#define MAC_WT0_WAF_STATIC 7 /* age: static */ #define MAC_WT0_MAC0_SHIFT 16 #define MAC_WT0_MAC1_SHIFT 24 @@ -247,6 +236,11 @@ #define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) #define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) +/* GPIO_CONF2 register bits */ +#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */ +#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */ +#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */ + /* INT_STATUS/INT_MASK register bits */ #define SWITCH_INT_SHD BIT(0) /* Send High Done */ #define SWITCH_INT_SLD BIT(1) /* Send Low Done */ @@ -303,4 +297,4 @@ #define LED1_IV_SHIFT 13 /* LED1 input value shift */ #define LED2_IV_SHIFT 14 /* LED2 input value shift */ -#endif /* _ADM5120_SWITCH_H_ */ +#endif /* _MACH_ADM5120_SWITCH_H */