X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/6933f718b48f15c09cbff9fdbb52504ac8592eb2..74240a6a6ef06a253891bfaf7e2098155121ee67:/target/linux/brcm-2.4/base-files/etc/init.d/netconfig?ds=sidebyside

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index f2d4c5293..65ffe320d 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -13,7 +13,7 @@ start() {
 			# WGT634u
 			echo boardtype=wgt634u
 		else
-			strings /dev/mtdblock/3
+			strings "$(find_mtd_part nvram)"
 		fi
 	) | awk '
 	function p(cfgname, name) {
@@ -47,16 +47,29 @@ start() {
 			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
 		}
 	}
-	
+
 	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
 		nvram[$1] = $2
 	}
-	
+
 	END {
 		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
 			c["wan_ifname"] = ""
 			c["lan_ifname"] = "eth1"
 		}
+		if (model == "ASUS WL-500g") {
+			c["wan_ifname"] = "eth1"
+			c["lan_ifname"] = "eth0"
+		}
+		if (model == "ASUS WL-500g Premium V2") {
+				c["vlan0ports"] = "0 1 2 3 5*"
+				c["vlan1ports"] = "4 5"
+		}
+
+		if (model == "Dell TrueMobile 2300") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
 		if (nvram["boardtype"] == "bcm94710r4") {
 			# Toshiba WRC-1000
 			c["lan_ifname"] = "eth0"
@@ -96,7 +109,36 @@ start() {
 			c["lan_ifname"]="eth0"
 			c["wan_ifname"]=""
 		}
-	
+
+		# Sitecom WL-105b
+		if ((nvram["boardum"] == "2") && \
+			(nvram["GemtekPmonVer"] == "1")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+
+		# ASUS WL-700gE
+		# These are actually same as defaults above. For some reason this script applies
+		# Generic BCM94704 settings instead so we revert to proper settings here.
+		# Hopefully someone will fix this properly soon.
+		if (model == "ASUS WL-700gE") {
+			c["lan_ifname"]="eth0.0"
+			c["wan_ifname"]="eth0.1"
+			c["vlan0ports"]="1 2 3 4 5*"
+			c["vlan1ports"]="0 5"
+		}
+
+		if (model == "Motorola WR850G V2/V3") {
+			c["vlan0ports"]="0 1 2 3 5*"
+			c["vlan1ports"]="4 5"
+		}
+		if (model == "ASUS WL-500W") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
+
 		print "#### VLAN configuration "
 		print "config switch eth0"
 		p("vlan0", "vlan0ports")